Tender For Special Repairs To Plastering, Painting, Water Supply And Sanitary Arrangements In Primary Health Centre At M.Pudupatti In Sivakasi Taluk Of Virudhunagar District.
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Virudhunagar → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Plastering, Painting, Water Supply And Sanitary Arrangements In Primary Health Centre At M.Pudupatti In Sivakasi Taluk Of Virudhunagar District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling clearing away and carefully stacking materials useful for reuse for any thickness of Reinforced Cement Concrete. |
| 2 | Clean removal of plaster from walls |
| 3 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 5 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 6 | Construction of INSPECTION CHAMBER 0.60 X 0.60 clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five crushed stone sand] using best quality of Country bricks of size 8 3/4\\" x 4 1/4\\" x2 3/4\\"with Plastering with Cement Mortar 1:3 [One Cement and Three P-Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 7 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification. |
| 8 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection toCI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. |
| 9 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications |
| 10 | Supplying, fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. 32 mmm dia CPVC pipe (Internal water supply) |
| 12 | 25 mm dia CPVC pipe (Internal water supply) |
| 13 | 32 mm dia CPVC pipe (External water supply) |
| 14 | 25 mm dia CPVC pipe (External water supply) |
| 15 | Supplying and fixing in position the following CPVC specials of heavy type and approved quality etc. complete complying with standard specification and as directed by the departmental officers. 32mm dia CPVC Elbow |
| 16 | 25mm dia CPVC Elbow |
| 17 | 32mm dia CPVC Tee |
| 18 | 25mm dia CPVC Tee |
| 19 | 25mm dia CPVC Bend |
| 20 | 20mm dia CPVC Bend |
| 21 | 32mm dia CPVC Coupling |
| 22 | 25mm dia CPVC Coupling |
| 23 | Drilling of 6\\" dia borewell using contractor's rig to the required depth as directed by the departmental officers in all soils such as loose soil/HSE/HRS/sedimentary strata including all incidental charges for drilling machineries transportation of machineries to work sopt, charges to fuel required for operation, labour charges and arges of drilling borewell to the required depth according to water table as directed by the departmental officers including clearing the site after complletion of work complying with standard specifications. |
| 24 | Supplying erecting and inserting 6\\" dia PVC casing pipe of approved quality and variety without slot to standard length of 6 metre suitable for 6\\" borewell including jointing the casing pipe in the PVC couplers with solvent materials in the drilled holes to the required depth conforming to pressure as per IS 4985. The rate is inclusive of cost of pipe, taxes, labour charges for cutting, threading, jointing the pipe, conveyance charges of materials and all other labour charges etc. complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on works. |
| 25 | Supplying laying and jointing HDPE pipes class-V-1MP a with working pressure of 10 kg/cm2 of approved quality and best quality conforming to ISS and with ISI mark of followin sizes including cutting threading and fixing into Borewell for suction line, air pipe etc., complete complying with standard specification.32mm HDPE Pipe |
| 26 | 25mm HDPE Pipe |
| 27 | Supply and errection of 2 HP Jet motor pump of best approved quality and make with ISI mark including all accessories. The rate include conveyance charges and labour charges etc. The Motor should be shown to the Executive Engineer before erection. |
| 28 | Supplying and fixing of suitable PVC End cap for 6\\" dia Borewell of approved quality with ISI mark etc., complete complying with standard specification . |
| 29 | Supplying and fixing in position of PVC water storage tank of best approved quality and brand of super thick with lid of capacity 1000 litres with accessories including giving necessary connections. etc. complete as directed by the departmental officers. |
| 30 | Supplying and fixing in position 15mm dia Brass CP Screw down tap of approved make confirming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specifications and including cutting and threading wherever necessary. |
| 31 | GST@ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender