Tender For Construction Of Free Urinal With Toilet At Tirumangalam Municipal Bus Stand
Tender Value
4 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
14 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Free Urinal With Toilet At Tirumangalam Municipal Bus Stand
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. (a) Foundation |
| 2 | Earth beam Foundation |
| 3 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means |
| 4 | Providing centering shuttering including necessary supports for height using mild steel angles of size 25mmx25mmx3mm laid over coundtry wood joist of size 10cmx 6.50cm spaced at 90cm center to center and supported by casurina props of 10cm dia and supported by casurina props of 10cm dia as directed for column, beam, etc compelete as per standard specification.(a) Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 5 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 6 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 7 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means |
| 8 | Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing,etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 9 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 10 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 12 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 13 | R.C.C.Jolly by a new of following size in M20 Concrete using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication |
| 14 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. |
| 15 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 16 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter(2025-26 PWD SOR P.No:84,SI No:M-0390) |
| 17 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 18 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathedCu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). 2025-26 Electrical SOR Pg.No:15 (SD-23) |
| 19 | Supplying and fixing of single box type 4' 40 W fluorescent fitting complete with copper choke and condenser with TW round block on wall or ceiling with tube PVC unsheathed copper leads from terminal to fitting etc., complete as per standard specification. (PWD-SD-87) |
| 20 | Conducting the Geophysical survey, quality and quantity test and transportation charges etc., (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist.) |
| 21 | Drilling of 110mm (4 1/2”) nominal Dia vertical borewells anywhere in Tamilnadu in all formations, suitable for down the hole hammer drilling such as medium hard rock to hard rock formation, consolidated formation etc. and drilling over burden to a Dia not less than 200mm including insertion of 165 mm PVC casing pipe, couplings caps and other relevant materials required up to the depth as directed by the Engineer or his representative including grouting of cement 25kg (minimum) up to the depth of over burden are including borewell development flushing of borewell at a pressure 7kg/cm2 (100 lb. per square inch) including yield test, crew charges, cost of consumables, transportation charges of casing pipes and all other materials including assembling complete to the satisfaction of the Engineer and as stipulated in the technical specification. The entire works should be carried out as per IS 2800 Part I & II / 1979. Finished Dia of borewells shall not be less than 145mm |
| 22 | Supply & Delivery & Erection of 150mm dia (Casing shallow depth up to 80m )PVC casing pipe as per IS 12818/2010 including all cost of labour charges etc,complete as per standard specifications.(2025-26 TWAD SOR VOL II Page No 18 Sl.No 1.1 WD-M0027 ) |
| 23 | Supply & Delivery of single phase 1.5 Hp Submersible Motor with out panel board 15LPMx90m with ISI Mark As Per IS 8034/2002 without Panel board including cost of all labour charges etc., complete as per standard specifications. (2025-26 TWAD SOR VOL II P No 173 Sl.No 2.0 WD M 1586) |
| 24 | SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START 1.50 HP Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/singlePhase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection,Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).(2025-26 TWAD SOR VOL II Page No 195 Sl.No 11.0 WD -M 1906) |
| 25 | Supply and Run of 2.5 sq.mm 3 core flat type copper cable confirming to IS 694 / 1990 including all cost etc., complete as per standard specifications.(2025-26 TWAD SOR VOL II Page No 204 Sl.No 12.1 WD -M1974) |
| 26 | Supply & Delivery of PVC Pipe & specials etc., complete (a) 32mm dia UPVC Column pipe (2025-26 WAD SOR VOL II Page No 7 Sl.No 1.3 WD-M0049) |
| 27 | Nylone Robe for Borewell (2025-26 PWD SOR P No 169 Sl.No M1072) |
| 28 | 200 mm dia Bore cover |
| 29 | Bore clamp set |
| 30 | 32mm dia (1 1/4\\" ) GI Adopter As per 1239/Part I /90 |
| 31 | 32mm dia (1 1/4\\" ) GI Hex Nipple (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0599) |
| 32 | 32mm dia (1 1/4\\" ) GI Union (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0603) |
| 33 | 32mm dia (1 1/4\\" ) GI Tee (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0595) |
| 34 | 32mm dia (1 1/4\\" ) GI Coupling (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0596) |
| 35 | 32mm dia (1 1/4\\" ) GI Elbow (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0594) |
| 36 | 32mm dia (1 1/4\\" ) GM Gate valve (2025-26 TWAD SOR VOL II P No 33 SI NO 5.2 WD M 0618) |
| 37 | Sintex tank Nipple |
| 38 | 25mm dia (1\\" ) GI Hex Nipple (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0599) |
| 39 | 25mm dia (1\\" ) GI Union (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0603) |
| 40 | 25mm dia (1\\" ) GI Tee (2025-26 TWAD SOR VOL II P No 32 SI NO 5.1b WD M 0595) |
| 41 | 20mmx 15mm (1\\"x1/2\\") dia (1\\" ) GI Reducing Elbow (2025-26 PWD SOR P No 47 SI NO G iv) |
| 42 | PVC Screw Down Tap Heavy Type 15mm dia (2025-26 TWAD SOR P No 153 SI No 161) |
| 43 | 25mm dia Superthick PVC Pipe (2025-26 TWAD SOR P No 82 Sl.No WD-M0817) |
| 44 | 25mm dia PVC Elbow (2025-26 PWD SOR P No 164 Sl.No M-0888) |
| 45 | 25mm dia PVC Tee 2025-26 PWD SOR P No 165 Sl.No M-0900) |
| 46 | 25mm dia PVC Coupler 2025-26 PWD SOR P No 164 Sl.No M-0882) |
| 47 | UPVC Ball valve (2025-26 TWAD SOR P No 82 Sl.No WD-M0820) |
| 48 | 63mm dia PVC Pipe (2025-26 PWD SOR P No 158 Sl.No M-0868) |
| 49 | 50mm dia PVC Elbow (2025-26 PWD SOR P No 159 Sl.No M-0891) |
| 50 | 50mm dia PVC Tee (2025-26 PWD SOR P No 160 Sl.No M-0903) |
| 51 | 110mm dia PVC Pipe (2025-26 PWD SOR P No 158 Sl.No M-0872) |
| 52 | 110mm dia PVC Elbow (2025-26 PWD SOR P No 162 Sl.No M-0941) |
| 53 | 110mm dia PVC Tee (2025-26 PWD SOR P No 162 Sl.No M-0943) |
| 54 | Supply & Delivery of 32 Amps Porcelain fuse unit (500 V) including all cost etc., complete. (2025-26 TWAD SOR Page No 199 Sl.No 6b) |
| 55 | Supply & Delivery of 32 Amps three phase 500 V 4 pole Change over switchincluding all charges etc., complete as per standard specifications. (2025-26 TWAD SOR Page No 200 Sl.No 9b) |
| 56 | supply & fixing of metre board including cost and conveyance of all materials and all labour charges etc., |
| 57 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 |
| 58 | Supply and delivery of MS Kiosk of size0.75m x 0.45m x 0.75m made up of MSangle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(2025-26 TWAD SOR Page No 89 Sl.No 18.0) |
| 59 | Supply & Delivery and fixing of 500 LiterHDPE tank as per IS 12701 / 1996 including Loading, unloading,transportation and labour charges fro fixing of GI pipes and specials for pipe connection works including cutting threading and fixing charges etc., as per standard specifications.(2025-26 TWAD SOR Page No 89 Sl.No 17.0) |
| 60 | EB Registration & service charges etc., complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender