Tender For Repair & maintenance Of Non Residential Buildings In Raipur Kalan, Makhan Majra, Raipur Kurd Dispensaries, Sampark Centers,Govt. Schools U.T. Chandigarh (Under maintenance Booth Sector-37) (Ch To: 2215 (N.P. ) Nrb )
Tender Overview
Project Description
Tender for Repair & maintenance Of Non Residential Buildings In Raipur Kalan, Makhan Majra, Raipur Kurd Dispensaries, Sampark Centers,Govt. Schools U.T. Chandigarh (Under maintenance Booth Sector-37) (Ch To: 2215 (N.P. ) Nrb )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, all lift including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m.disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 4 | Pipes, cables etc, not exceeding 80 mm dia: |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Providing and fixing 1st quality / ceramic / vitrified glazed Floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make of size 300x300 (Colour & design as approved bt Engineer-in-charge) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete in all respect make as approved by EIC |
| 10 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 11 | 1:3 (1 cement: 3 fine sand) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 13 | One or more coats on old work |
| 14 | Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. low level white vitreous china flushing cistern & C.P. flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make |
| 15 | W.C. pan with ISI marked white soild plastic seat and lid |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 17 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 18 | Providing and fixing white vitreous china water closet squatting pan (Indian type) |
| 19 | Orissa pattern W.C. pan of size 580x440 mm |
| 20 | Provding and fixing of C.P Bras jet with brass nozzle steel flange and PVC fkexible pipe 1/2\\" approximate 1 mtr length complete in all respect |
| 21 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 22 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete |
| 23 | 10 litre (full flush) capacity |
| 24 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete : |
| 25 | White solid plastic seat with lid |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 27 | Flexible pipe |
| 28 | 32 mm dia |
| 29 | Providing and fixing soil, waste and vent pipes : |
| 30 | 100 mm dia. |
| 31 | 75 mm diameter : |
| 32 | Providing and fixing heel rest sanitary bend |
| 33 | 100 mm dia as per DSR No. |
| 34 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 35 | 100 mm inlet and 75 mm outlet DSR |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. DSR 18.10 |
| 37 | 15 mm dia nominal bore |
| 38 | 20 mm dia nominal bore |
| 39 | 25 mm dia nominal bore |
| 40 | Providing and fixing of Gun-Metal Peat Valve |
| 41 | size 20mm i/d |
| 42 | size 15mm i/d |
| 43 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 44 | 15 mm nominal bore |
| 45 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 46 | 15 mm nominal bore |
| 47 | 20 mm nominal bore |
| 48 | 25 mm dia nominal bore |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 50 | Providing and of fixing C.P. brass bib cock of approved quality |
| 51 | 15 mm nominal bore. |
| 52 | Providing and fixing C.P. brass long body bib cock of approved quality |
| 53 | 15 mm nominal bore. |
| 54 | Providing and fixing of Extension nippple |
| 55 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 56 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. DSR |
| 57 | Providing and fixing PTMT, push cock of approved quality and colour. |
| 58 | 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. |
| 59 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 60 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 61 | 20 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 62 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms |
| 63 | Providing and fixing drip seal joint |
| 64 | 100 mm dia. |
| 65 | 75 mm diameter : |
| 66 | Provding and fixing of Of C.P steel grating hole/ without hole heavy duty 10 mm dia complete in all respect of approved make |
| 67 | Provding and fixing of C.P long bend for OWC complete in all respect |
| 68 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 69 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 70 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 71 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board and C.P. Screw etc. to satisfaction of EIC of approved make |
| 72 | Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm |
| 73 | Providing and fixing of white vitreous chinaware urinal partitions of size 90x320x720 mm complete in all respect Make M-cera S4090101 |
| 74 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 75 | 110mm i/d |
| 76 | 75 mm i/d |
| 77 | Providing and fixing of PVC fitting for Low level cistern complete in all respect. |
| 78 | Providing and fixing of PVC ball cock for Low level cistern complete in all respect. |
| 79 | Providing and fixing of PVC handle for Low level cistern complete in all respect. |
| 80 | Providing and fixing of PVC cover for water storage tank cover duly ISI marked of approved make |
| 81 | i) 300 to 1000 ltr. Cap. |
| 82 | ii) 2000-5000 ltr Cap. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender