Tender For Lighting Work Atchildren Park Situated Near Manoj International Hotel In Krishna Puram.
Tender Value
10.68 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
5 days left
EMD
22000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lighting Work Atchildren Park Situated Near Manoj International Hotel In Krishna Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Light Work |
| 2 | Supply & fixing of 4 Mtr. Log GI Octagonal pole of approved make top dia 70mm, bottom dia 130mm and base plate 220x220x12mm having 3mm thikness on RCC (1:2:4) foundation including the cost of foundation, foundation bolts, execvation & back filling and required T&P complete in all respect as per direction of engineer in charge. (Make Utkash/Shri Gee/Rama or PWD approved equivalent) A.R. |
| 3 | Supply and fixing of decorative 45 watt LED Post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confiming to IP65 and above protection, 90-100lm/W, PF>0.95, THD<20% at full load, with 5 Years warrantee complete in all respect as per direction of Engineer in charge. (Make Havells/Wipro/Bajaj/Oreint/Philips) A.R. |
| 4 | S/L of following size cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make i.e. Havells, Polycab, KEI, Gloster. Complete in all respects as direction of E/I. (AR) |
| 5 | (b) 10 Sq.mm 4 core |
| 6 | (c) 16 Sq.mm 4 core |
| 7 | S/F of following size Aluminium Lug (socket) to the cable lead insulating with tape and making connections complete in all respects as per direction of Engineer in charge. (AR) |
| 8 | (a) 10 Sq.mm |
| 9 | (b) 16 Sq.mm |
| 10 | S/F of S.T. Pole 9.00 Mtr. Long designated 410-SP-33 including base plate in 1:3:6 C.C. foundation excavation 1/6 of pole length below G.L. and 30cm above G.L. 20cm thick arround the pole and back filling etc. complete in all respects as per direction of E/I. (AR) |
| 11 | Painting of the electric pole with 2 coats of AL’ paint over red oxide primer complete in all respects as per direction of Engineer in charge. (PSR) |
| 12 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy>135 lm/Watt). SITC of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing including, bracket, clamp etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Make Philips/Bajaj/Crompton or as per direction E/I. (A.R.) |
| 13 | (a) 90 Watt |
| 14 | Providing and fixing 63 Amp capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. Complete in all respects as per direction of E/I. |
| 15 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Complete in all respects as per direction of E/I. |
| 16 | Supply and laying/Fixing of 80mm dia G.I. Pipe Medium class for cable complete with supported by clamp all complete as per direction of Engineer in charge. (A.R.) |
| 17 | Supply & Fixing of following capacity Automatic (Astronomical/Algorithm Software based) 3 Phase TPN Street light cubicle control panel Polycabonate fiber box or M.S. Box painted with anti corrosive alkali and acid proof paint consisting of timer switch with contactors. HRC fuses, Isolating switch, Surge protector, metering instrument, indicator & instrument box with CTs etc. complete in all respect as per direction of Engineer in charge. (A.R.) |
| 18 | (a) 63 Amp. 3Ø TPN, M.S. Box |
| 19 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required with connection complete in all respects as per direction of E/I. |
| 20 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 Eachs of G.I. nut bolt & spring washer spaced at 50mm) complete in all respects as per direction of E/I. |
| 21 | S/L/Erection of G.I. Wire No. 8 SWG including binding etc. as required complete in all respects as per direction of E/I. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender