Tender For Balance Work Of Repair Of Rain Damages Incurred In Gsss Kehlog, Distt. Solan Hp Under Deposit Work (Sh:- Construction Of Retaining Wall, Plaster Work, Cement Concrete Flooring, Painting And Distempering Work Etc.)
Tender Overview
Project Description
Tender for Balance Work Of Repair Of Rain Damages Incurred In Gsss Kehlog, Distt. Solan Hp Under Deposit Work (Sh:- Construction Of Retaining Wall, Plaster Work, Cement Concrete Flooring, Painting And Distempering Work Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.or as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidental charges. |
| 2 | Providing and laying plain cement concrete Grade M- 10 (Ten) nominal mix 1:3:6 (one cement isto three sand isto six graded crushed hard stone aggregate 25mm (twenty five millimetre) nominal size) mechanically mixed, vibrated and curing complete in open foundations including form work as per drawings and MORDTechnical Specifications Clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) and as per the direction of the Engineer-in-Charge including carriage of material through all modes of transportation within all leads and lifts and other incidentals. |
| 3 | 52mm thick cement concrete flooring with concrete hardener topping, under layer 40mm thick cement concrete1:2:4 (1cement : 2coarsesand : 4graded stone aggregate20mm nominal size)and top layer12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener ix:2graded stone aggregate 6mm nominal size) by volume,hardening compound mixed@ 2 litreper 50kg of cement or as permanufacturer's specifications. This includescost of cement slurry, but excluding the cost of nosing of steps etc. complete.as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 4 | Repairs to plaster in patches of 2.50 sqm. (two point five zero square meter ) and under and 10 to 15mm (ten to fifteen millimeter) thick with cement mortatr 1:4 (one cement is to four sand) including cutting the patches in proper shape and re-plastering the surface of the wall including disposal of rubbish to the dumping ground within all lead as per direction of Engineer-in-Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 6 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable primingcoat to give an even shade as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges |
| 7 | Finishing walls for New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives including all leads, lifts and carriage of materials as per direction of Engineer-in-Charge. |
| 8 | Painting Steel work Finishing with Deluxe Multi surface paint system for interiors and exteriors to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and using Primer as per manufacturers specifications as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender