Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #58516690

Tender For Providing And Installation Of New Tubwell Size 200Mm I/D, 195Mtr Depth, With Reverse Rotary Rig And Providing, Fixing And Jointing Of Pvc Pipe, Ci/Di Flanged End, Construction Of Sluice Valve Chamber, Chemical Dosing Chlorinator, Testing A

Issued by Government Departments · Rupnagar, Punjab
Tender Value
17.79 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
0 days left
EMD
35590
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Providing And Installation Of New Tubwell Size 200Mm I/D, 195Mtr Depth, With Reverse Rotary Rig And Providing, Fixing And Jointing Of Pvc Pipe, Ci/Di Flanged End, Construction Of Sluice Valve Chamber, Chemical Dosing Chlorinator, Testing And Commissioning Of Pumping Machinery In The Place Of Failed Tubewell, At Existing W/S Scheme Sotal Baba Block Morinda, District Rupnagar (Under 4215)

BOQ

Name of Work:- PROVIDING AND INSTALLATION OF NEW TUBWELL SIZE 200MM I/D, 195MTR DEPTH, WITH REVERSE ROTARY RIG AND PROVIDING, FIXING AND JOINTING OF PVC PIPE, CI/DI FLANGED END, CONSTRUCTION OF SLUICE VALVE CHAMBER, CHEMICAL DOSING CHLORINATOR, TESTING AND COMMISSIONING OF PUMPING MACHINERY IN THE PLACE OF FAILED TUBEWELL, AT EXISTING W/S SCHEME SOTAL BABA BLOCK MORINDA, DISTRICT RUPNAGAR (UNDER 4215)
Sl. No. Item Description
1Tubewell
2Drilling of 500mm dia bore with Reverse Rotatry Rig in all kinds of soil including the cost of consumable stores, fuel oil and transportation of rig to the site. complete in all respect.
3Drilling of 500mm dia bore with Reverse Rotatry Rig Upto 150 m depth BGL.
4Drilling of 500mm dia bore with Reverse Rotatry Rig Beyond 150 m depth BGL up to 300 Mtr
5Drilling of test bore hole including the rate for logging (Electric logging shall be carried out by Contractor upto full depth) to be paid only for the drilling depth beyond the bail plug margin or the tubewell is abandoned.1. Eraction and dismantling of boring plant including all arrangment for the transportation of the boring equitment to site of work from the store of the contractor at site and back are to be made by the contractor at his own cost. all rates should be quated for supplying the material at site of work. pits for collection of water and water for drilling tubewell to be arranged by the firm/contractor at site at his own cost. 2. in case the bore is converted into a tube well payment of bore shall be made up to the bail plug margin(7% of main bore drilling or as actual as per fiel requirmwnt whichever is less) required for sustaining the main bore. the test bore beyond margin shall be paid at the rate of test bore drilling.
6Making electric Logging of borehole with electronic well logger including cost of equipment at site etc.complete in all respect
7Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.
8200mm nominal diameter (weight 41.6 kg per metre) 8.00 mm thickness
9Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode.to lower the strainer into tubewell respects.
10200mm Steel Strainer (slot size 0.75mm) 8.00 mm thickness
11Supplying, lowering & fixing of M.S Special socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect.
12200mm internal diameter
13Supplying, Fixing & lowering of Stainless Steel Socket as per IS:8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode.to lower the strainer into tubewell bore complete in all Respect.
14200mm internal diameter
15Supplying & Fixing of bail plug of M.S pipe complete with inverted U-hook attched to the bottom plug complete in all respect.
16200mm internal diameter (weight 41.6 kg per metre) 8.0 mm thickness
17Supplying and fixing well cap having thread to fix on housing pipe. Complete in all respects.
18200mm internal diameter
19Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.
20Supplying at site Wooden Box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.
21Supplying at site of gravel of 1/16\\" to 1/8\\" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments .(to be paid as per actual length of pipe)
22The rates including loading & unloading charges.
23Supplying & fixing mild steel centering guides made out of 32mm x 6mm thick M.S. bar complete in all respects.
24(a) Strainer & MS pipe should be properly jointed with sockets and duly welded to ensure maximum strength of joint.
25(b) A steel strip of suitable size should be welded across the length of strainer to provide additional strength to the tubewell assembley.
26Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide & Urenium etc.)
27Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.
28Capacity of Air compressor 550 cfm at 600 PSI
29Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.
30Collection of water sample from different strata and testing of sample from approved laboratory
31Supplying at site Tibba sand etc. including pouring and packing in the annular space between the pipes assembly and the bore above clay seal complete in all respect.
32Providing & Fixing Sanitery Seal (As per IS:2800-2019)
33Provision for Sterilisation of tubewell with sodium hypochorlide/chlorination of well as per IS code 2800: 2019 complete job. The well shall be disinfected or sterilized as per IS code 2800:2019 or latest, after the development by pump and before the final test. All wells regardless of the use should be sterilized on completion to prevent or retard the growth of corrosion or incrustation fostering organisms. This should be done by introducing chlorine into the water in the well and immediate aquifer surrounding the well .The volume of water in the screen and casing should be estimated and sufficient chlorine added to yield for water with chlorination of 1000 ppm. The solution should be poured into the well and thoroughly mixed in the well by surging with pump. The solution should remain in the well for at leaset 6 hours during which it should be surged at about 2 h interval. After expiration of contact time , the well should be pumped initially back into the well for abour 30 minute and late to waste until there is little of no odour or taste of chlorine in the discharged water . IT has been found that using hypochlorite is of 10% concentration, the requirement of hypochlorite is 10 litre for every cubic meter of water in the well to produce.
34Providing & Fixing Clay seal in graval pack minimum 3 Mtr. (As per IS: 2800-2019)
35RISING MAIN
36Providing, Laying, fixing & jointing of PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including excavation & back filling as per analysis A 14 complete in all respects.
37110mm o/d PVC Pipe of 10kg/Sqm2
38Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)
39150 mm I/d
40Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 33Kg Each
41Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (size 0.9m x 0.9m)
42Chlorinator
43Prov. Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator ,suitable for delivering 0.5 to 6 Litres of Bleaching Powder Solution/Sodium Hypo solution per hour under maximum delivery pressure up to 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS. standard specifications.
44PUMPING MACHINERY
45Providing, installing, testing and commissioning of 1 no. 15 BHP electrically driven pumping set of reputed make Complete in all respects
46PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
47Overall size 4.0sq.mm (56/0.3mm), 3Core
48Construction of Gravel Pit outside the Pump Chamber. (0.90m Dia.) as per standard design & drawings of public health department.
49Providing and installing 100 mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects
50Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
5180mm i/d Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58516690
AUTHORITY Government Departments
TENDER VALUE 17.79 Lakhs
LAST DATE 20-11-2026
Authority
Authority Name Water Supply And Sanitation Department
Work Description Tender for Providing And Installation Of New Tubwell Size 200Mm I/D, 195Mtr Depth, With Reverse Rotary Rig And Providing, Fixing And Jointing Of Pvc Pipe, Ci/Di Flanged End, Construction Of Sluice Valve Chamber, Chemical Dosing Chlorinator, Testing And Commissioning Of Pumping Machinery In The Place Of Failed Tubewell, At Existing W/S Scheme Sotal Baba Block Morinda, District Rupnagar (Under 4215)
Basic Detail
Tender No DWSS/2026-27/141
Bidding Type Tender
Location
City Rupnagar
State Punjab
Key Dates
Publish Date 13 Nov 2026
Submission Date 20 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 17.79 Lakhs
Tender Fee 1000
EMD 35590
Exemption Available
Document List
7efec80f-e9ec-4ba8-9110-5647614af16a.html
BOQ_366435.xls
DNITFINAL.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
html

7efec80f-e9ec-4ba8-9110-5647614af16a.html

xls

BOQ_366435.xls

pdf

DNITFINAL.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender