Tender For Special Repair Of Veh Repair Bay Including Shed Of Bldg No Et 412 At Changsari And Renovation 04 X Toilet And Bathroom Of Bldg No P 37 At Rangia Under Ge Rangia
Tender Value
45.54 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
15 days left
EMD
91080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baksa → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Veh Repair Bay Including Shed Of Bldg No Et 412 At Changsari And Renovation 04 X Toilet And Bathroom Of Bldg No P 37 At Rangia Under Ge Rangia
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling timber scantlings 40 sq. cm and over in section, in any position and in unframed work, complete all as specified and as directed. |
| 2 | Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section and in unframed work, complete all as specified and as directed. |
| 3 | Dismantling Plain or corrugated steel sheeting, Galvalume sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 4 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed. |
| 5 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 6 | Material and labour for brickwork with fly ash bricks, old size, having compressive strength not less than 75Kg sqcm, straight or curved on plan exc 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and as directed. |
| 7 | M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and directed. |
| 9 | Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions, top surfaces finished fair and even without using extra cement complete all as specified and as directed.Note: WPC shall be apply in second layer and measured and paid separately. |
| 10 | Supply only liquid water proofing compound conforming to relevant IS complete all as specified and as directed. |
| 11 | M&L for two coat of oil bound distemper (oil emulsion) over a coat of 1.5mm thick wall putty on newly plastered surfaces of walls including one coat of primer and necessary preparation of surfaces all as specified and directed. |
| 12 | M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as per specified and as directed. |
| 13 | M&L for Reinforced cement concrete M-25 (design mix) in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 14 | M&L for Reinforced cement concrete M-25 (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 15 | M&L for Reinforced cement concrete M-25 (design mix) in Chajjas complete all as specified and as directed. |
| 16 | Use and waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions, square , rectangular or polygonal in size for rough finished surface of concrete omplete all as specified and as directed. |
| 17 | Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, Chajjas etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 18 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (by using 40 mm graded crushed broken stone aggregate) in foot path/ hard standing/ pavings/ plinth protections, finished even and smooth using extra cement omplete all as specified and as directed. |
| 19 | M&L for mild steel TMT bars of 10mm dia and above, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 20 | Description all as per BoQ item No 19 here-in-before, but 8mm dia bars in stirrups complete all as specified and as directed. |
| 21 | S&F steel work in tubular trusses/ posts, purlins etc. including special shaped washer etc. complete using ERW or induction butt-welded tubes confirming to IS complete all as specified and as directed. |
| 22 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 23 | S&F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 24 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick , of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 25 | S&F Powder coated aluminium window/ventilator sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 26 | S&F Powder coated aluminium window/ventilator sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender