Tender For Modification Of Civil Repair Works In Festival Products Store Room Adjacent To The Mini Store At Products Dairy, Ambattur
Tender Value
4.63 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modification Of Civil Repair Works In Festival Products Store Room Adjacent To The Mini Store At Products Dairy, Ambattur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Brick work and disposal of debris from the site etc., complete as directed by the Federation officers and as per the technical Specifications. |
| 2 | Supply & fixing Double scaffolding for the span ht of 4-5m height site etc., complete as directed by the Federation officers and as per the technical Specifications. |
| 3 | Dismantling of existing mesh at a 4.5m ht of floor etc., complete as directed by the Federation officers and as per the technical Specifications. |
| 4 | Brick partition wall in CM 1:3, Including labour charges etc complete as instructed by the federation engineers and as per standard specification.Ground Floor |
| 5 | Plastering with CM 1:5, 20mm thick over the cement concrete for floor finish including curing etc.,complete as directed by the federation officers and as per the standard specifications. |
| 6 | Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc.,complete as directed by the federation officers and as per the standard specifications. |
| 7 | Supply, fixing in position of precast RCC jolly for ventilation provision at height of above basement 3 to 4.5m levet etc.,complete as required height with necessary mortar packing materials, manpower etc.,complete. |
| 8 | Painting, supplying and applying TWO coats of old wall surfaces with ready mixed plastic emulsion paint of first class quality and of approved colour over a coat including thorough scrapping, clean removal of dirt, scaffolding charges etc., complete complying with standard specification as per the direction of federation officers. |
| 9 | Painting the new plastered wall surfaces with 2 coats of ACE paint of approved quality and colour over priming coat including Wall Primer,ACE paint for wall surfaces and labour charges paint over a priming coat etc, Complete as directed by the federation engineers and as per standard specification. |
| 10 | Painting two coats over old iron works such as MS iron metals, steel doors, windows, ventilators, window bar balustrades etc., with best approved first quality synthetic enamel paint of approved colour in all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification |
| 11 | MS sheet & false ceiling repair works made by Tar felt polycarbon sheet & replacing and using old sheet without damages with necessary mortar packs cost including for labour, PVC adhesives & conveyance of all charges etc., complete as directed by the Federation officers and as per standard specification. |
| 12 | Refixing the mesh etc., complete as directed by the Federation officers and as per the technical Specifications. |
| 13 | Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. |
| 14 | Fabricating, supply and fixing in position of MS angle work tubular hollow section, L angle section incliding cutting, welding and fixing in purlin with required size etc including anti corrosive enamel paint etc, complete complying with standard specification |
| 15 | Supply & fixing RCC rings frame for exhaust open with necessary accesories as directed by the federation officers and as per the standard specifications. |
| 16 | Plain Cement Concrete 1:2:4 using 20 mm size HBG stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish including side shuttering if required and compaction ,curing etc., complete as directed by the Federation officers and as per the technical Specifications |
| 17 | Pest entry mesh closing in all floors the cost including for required material, labour, conveyance of all charges etc., complete as directed by the Federation officers and as per standard specification. |
| 18 | Cutting and trimming tree branches and removal of debris from site etc., complete as directed by the Federation officers and as per standard specification. |
| 19 | Engaging JCB for various usage as directed by the federation engineers and as per standard specification. |
| 20 | Supply and fixing of 450 mm Exhaust fan with necessary accessories etc., complete as directed by the Federation officers and as per standard specification. |
| 21 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (18%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender