Housing Urban and Rular Development Government Departments Closing in 13 days TDR #58515410

Tender For Construction Of Public Waiting Shed In The Campus Of Government Pentland Super Speciality Hospital For Maternity And Child Health At Vellore In Vellore District.

Issued by Government Departments · Vellore, Tamil Nadu
Tender Value
1.15 Crore
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
68000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Public Waiting Shed In The Campus Of Government Pentland Super Speciality Hospital For Maternity And Child Health At Vellore In Vellore District.

BOQ

Name of Work:- Construction of Public Waiting Shed in the campus of Government Pentland Super Speciality Hospital for Maternity and Child Health at Vellore in Vellore District.
Sl. No. Item Description
1Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.
2Supplying and filling in foundation, basement, etc with filling Crushed Stone Sand (M-sand) and in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
3Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.
4Supplying and filling of conveyed Gravel by lorry in basement filling including stacking for premeasurement, conveyance loading and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete as directed by the dept., Officers and complying with standard specification.
5Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers - mixing by manual means.
6Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for Flooring including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers - mixing by manual means.
7Brick work in Cement Mortar 1:5 (One Cement and Five M-Sand) using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.
8For Foundation and Basement
9For Superstructure In Ground Floor
10Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
11Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
12Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
13Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
14Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
15For Foundation and Basement
16For Superstructure In Ground Floor
17Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)
18For Foundation and Basement
19For Superstructure In Ground Floor
20Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
21Paving the floor with best quality Vitrified Tiles of size 800 x 800 x 10mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
22Supplying and fixing with best approved quality fine polished Synthetic Grey, Paradise and Similar varieties of Granite Stone Slab of size 1200 x 600 of 18/20mm thick fine polished cuddapah slab of 20 / 30mm thickness for sitting bench arrangements including laying to correct alignment with necessary cement mortar with colouring pigment etc, complete complying with standard specification and as direct.
23Dadooing walls with granite tiles of best approved quality fine polished Synthetic Greay, Paradise and similar varieties Granite stone slabs of size 1200 x 600 x 18/20mm thick of in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
24Dadooing walls with glazed printed design colour glazed tiles of size 300 x 450 x 8mm best approved quality, white / colour glazed tiles conforming to IS 15622 of in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
25Paving pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 in Cement Mortar 1:3 (One Cement and Three crushed stone sand), with required Cement Slurry and Mortar Plasticizer, 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
26Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five M-sand), 12mm thick with mortar Plasticizer at 200ml per 50Kg of cement used in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
27Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other equivalent compound conforming to BIS at 200ml of One cement bag (50Kg) for increased workabbility and air entrainment used finishing including hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.
28Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers.
29Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work).
30Painting the newly plastered wall surface with Texture Finish Paint of first class quality and approved colour over a priming coat including two legged scaffolding, labour charges etc., comple complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
31Painting two coats of newly plastered wall surface with ready mixed Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
32Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
33Fabrication, Supply and Fixing in position of Weld Mesh of size 7.5x2.5cm 10 gauge inclusive of cost of red oxide primer etc., and as directed by the departmental officers.
34Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
35Manufacturing, Supplying and Fixing of Stainless Steel Gril gate using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 210mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 210 mm . The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
36Supply, Fabrication, Erection, alignment and levels as per approved shop drawing of structural steel work in built up sections . Necessary permanent rivets, bolts (GI Connection bolts), washers and nuts, handling, straightening, cutting, drilling holes, welding, shop assembly, transport to erection site, storing, leading to erection site and of approved make prior to erection. (payment to be made on the basis of standard section weights for net weight erected in position excluding permanent/ temporary bolts, rivets etc., Rate should include the cost of permanent bolts, nuts, and washers packing plates as required and approved. And no seperate measurement shall be taken for payment of permanent bolts, nuts, all types of washers and packing plates etc.,). included Painting .
37For Main Frames
38Connection Bolt nuts
39Supply, Fabrication, Erection, alignment and levels as per approved shop drawing of cold rolled steel sections from approved manufacurer of required thickness and shape, size for purlins, cladding, tie beams of built up sections including necessary cleats, nuts, bolts, predrilled holes lapping all complete as per drawing.Measurement for nuts,bolts,washers will not taken and rate for this shall be included in this item itself.
40Same as above but with galvanised cold formed Purlin& Girts 1.5mm / 1.8mm Thickness steel section Z Sections and C-Section Grade E250 (As per approval drawing)
41Supplying and fixing in position to alignments and levels foundation and anchor bolts made of brite bar(Grade 4.6) of required length with anchor plates, nuts,washers,etc in rcc columns and grouting with non-shrink grout (measured under relevant item) co-ordinating with general builders work.
42Supply and Fixing Rain water Gutter (UPVC) (As per approval drawing)
43Supplying and embedding 200mm dia P.V.C rain water pipes of approved quality embedded inside the RC columns/masonry in position or underside of truss/lattice, column sides with all necessary specials like shoes , bends or any other specials required to suit site conditions etc., jointed with suitable adhesive and covering the joints using fibre glass wherever required, the steel collar and PVC Pipes with necessary MS clamps,brackets ,bolts and nuts all complete as directed. The rate should including providing M.S pipe sleeve necessary lugs of required dia in the concrete. (As per approval drawing)
44Supply and Laying in roofing bare GALVALUME profiled sheet made out of TCT 550 Mpa cold rolled sheet with hot dip metallic coating of aluminium zinc alloy 150gms/sqm as approved by Consultant also to suit to site requirements and fixed with necessary suitable imported galvanized carbon steel self drilling & self tapping screws of BUILDEX or corroshield confirming to IS 277 (2003): Galvanized Steel Sheets (Plain and Corrugated) or Equivalent of required diameter and length as approved all complete with EPDM sealing washers, foam fillers wherever necessary, butyl sealent at all side laps, silicon sealent wherever necessary. Rate should include cost of plastic caps of pproved colour of U.V resistance and button bolts all as per manufacturer's specification all complete as approved by the Architect.(Only laid area without overlapping wil be measured for payment.).. No extra payable due to shade selection.(As per approval Drawing) (OFF white) COLOUR COATED sheet
45Supply and Installation of Flashing -0.47mm Total coated Thickness (TCT) Pre painted Galvalume sheet with custom formed to the required profile as per specification with fastnered and weather sealing to ensure water tight finish
46Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.5 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level (for Commercial purpose)
4720mm dia UPVC pipe
4825mm dia UPVC pipe
49Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
50Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
51110mm dia PVC soil / waste pipe
52Supplying and Erection of 50 liter capacity of premium Quality Stainless steel 304 water Dispenser with following specification. The water Disoenser has normal water tank made of Linear low-density polythyiene (LLDPE) of 20 L Capacity. Cold water tank made of Stainless steel 304 of 20 lit capacity and Hot water tank made of Stainless steel 304 of 4 lit capacity. The water Dispenser body and legs MOC (Material of Construction) of SS 304 and Over all diamension of 1400 x 510 x 480 mm etc, complete complying with Sandard specification.
53Supplying and erecting in position of 3 Seater Steel Chairs Rust and Water Proof. Stainless Steel seat, handles and legs, Steel Beam.325-350 kg Weight capacity Durable Parts and Supports, Whole Welded Connections etc. 52 cm Seat Bent Line: 90cm, Arm Length: 37cm, Width: 31cm, High: 4cm, Leg Length: 54cm, high: 22cm without SS base Height. BEAM: 1.7mm Thickness with Durable Screw Tube; Total Out to Out Width: 180cms Height: 80cm Depth: 64cms Weight: 26-27 Kgs Including cost of all taxes and supply of direct to site of work with all accessories etc., complete as directed by the Departmental officers ( The Supply of chairs should be got approved by the Executive Engineer before supply )
54Supplying and fixing in position Bitumen Felt 15mm thick Pad including Labour charges for fixing etc., complete complying with standard specification
55Providing rain water harvesting recharge Perculation pit for a total depth of 1.95m,for which 0.45m depth in natural soil pit with 0.80m dia balance depth (well ring size of dia 0.90m and 0.30 depth) covered with RCC cover slab of 75m thick of 1.00m dia and thus the top of well ring kept 0.15m above the ground level, and filling the rechargepit with m-sand and 40mm for 0.30m depth and 1.05m depth respectively and balance depth of 0.60m is kept as freeboard for RCC percolation pit. the rate includes cost of all materials such as Rc well ring, Rc cover slab, 40mm HBS jelly m-sand at site of work and labour charges for fixing wellring, cover slab in position and filling m-sand and 40mm metal.
56Supplying and fixing in position best quality of 160mm PVC pipe with working pressure of 6 kg / cm2 for rainwater harvesting having ISI mark and providing leak proof joints with adhesive T.W. plugs, screws including fixing to the wall with PVC specials, MS clamps and making connection to all fittings, dismantling masonry RCC works wherever necessary and making good the distrubed portion to the original condition including cutting, jointing and fixing in position at true alignment etc., complete complying with standard specifications. [The PVC pipe should be got approved by the Executive Engineer before use on works )
57Supplying, fixing of cylindrical vertical notational polythene water storage tank of 1000 litres capacity confirming to I S. 12701 / 96. the tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all materials labour, conveyance, hoistings and fixing charges etc., ( The water tank should be got approved by the Executive Engineer before use on works by the dept., Officers.
58GST @ 18 % Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58515410
AUTHORITY Government Departments
TENDER VALUE 1.15 Crore
LAST DATE 30-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Public Waiting Shed In The Campus Of Government Pentland Super Speciality Hospital For Maternity And Child Health At Vellore In Vellore District.
Basic Detail
Tender No 8 and 9/VLR-CLE/26-27/10 and 13.11.2026
Bidding Type Tender
Location
City Vellore
State Tamil Nadu
Key Dates
Publish Date 13 Nov 2026
Submission Date 30 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 1.15 Crore
Tender Fee Ref. Documents
EMD 68000
Exemption Not Available
Document List
34c90226-5581-413d-b2f6-0b54105d6dc7.html
BOQ_871454.xls
Documents_Public_Waiting__1.pdf
General-Condition_Public__2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

34c90226-5581-413d-b2f6-0b54105d6dc7.html

xls

BOQ_871454.xls

pdf

Documents_Public_Waiting__1.pdf

pdf

General-Condition_Public__2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender