Housing Urban and Rular Development Local Bodies Closing in 9 days TDR #58515408

Tender For Deepaing Of Exiting Open Well With Steining Wall And 7.5Hp Moter , Hdpe Pipe Near Kalliyamman Kovil At Kodugal Head Of Pachamalai Panchayat, Gangavalli Block In Salem District

Issued by Local Bodies · Salem, Tamil Nadu
Tender Value
15 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
9 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Deepaing Of Exiting Open Well With Steining Wall And 7.5Hp Moter , Hdpe Pipe Near Kalliyamman Kovil At Kodugal Head Of Pachamalai Panchayat, Gangavalli Block In Salem District

BOQ

Name of Work:- Deepaing of Exiting Open well with Steining wall and 7.5HP Moter , HDPE Pipe near Kalliyamman Kovil at Kodugal H/o Pachamalai panchayat, Gangavalli block in Salem District
Sl. No. Item Description
11) Deepaing of Exiting Open well with Steining wall and 7.5HP Moter , HDPE Pipe near Kalliyamman Kovil at Kodugal H/o Pachamalai panchayat, Gangavalli block in Salem District
2Geophysical investigation charges including preparation
3Earth work open well excavation complying with relevant clauses of T.N.D.S.S Well sinking & with lead upto 10m in Hard stiff clay,stiff black cottonsoil, hard red earth, shales, murram, gravel, stoney earth & earth mixed with small size boulders and hard
4Open well 2m - 4m depth
5Earth work open well excavation complying with relevant clauses of T.N.D.S.S Well sinking & with lead upto 10m in Medium rock and dense medium rock not requiring blasting - first 2m depth.
6Open well 4m - 6m depth
7Open well 6m - 8m depth
8Open well 8m - 10m depth
9Earth work open well excavation complying with relevant clauses of T.N.D.S.S Well sinking & with lead upto 10m in Medium rock and dense medium rock requiring blasting - first 2m depth.
10Open well 10m - 12m depth
11Open well 12m - 14m depth
12Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
13Supplying and errecting shuttering including necessary support for plane surface in Foundation Basement and Roof slabs strutting upto 3.29 M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations grade beams, raft slabs stair case steps, bed blocks, critical pier, etc beams roof slabs, using mild steelsheets of size 90 x 60 cm and 10 gouge stiffened, welded with steel angles of size 25 mm x 25 mm x 3mm for boarding laid over silver oak (country wood) joists of 10 cm size x 6.5 cms size spaced at about 90 cms center to center and supported causorina props of 10 cm to 13 cms spaced at 75 cms to center to center etc., complete complying with standard specification and as directed (SI - 155) for column
14Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS rod or RTS bar will be supplied departmentally at section stores and cost will be recoverd at issue rate). the binding wire shall supplied by the contractor.
15Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.
16Provision for Water Baling out Charges
17Supplying and Delivery of Control 7.5HP 3 Phase Panel Board (With two level guardand auto start )
18Supply and delivery of Open well Submersible pump set conforming to IS 14220 / 2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. 75x100 lpm x m - 7.5HP
19Supplying and Delivery of 63mm HDPE PIPES - PE 100 AS PER IS 4984/2016
20Towards Labour charges for laying and jointing of 63mm HDPE Pipe and Accessoriesas per BIS standards including all Charges etc
21Supply and Delivery of Nylon Rope for Open well
22PVC Insulated and Sheathed 3 Core 4.00 sq. mm Flat Type Cable Conforming to 694/1990 (Flnolex,Kundan) WD-M1975
23Supply & delivey of MS Kiosk as per standards Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.
24Construction of Pedestal for Brick work with Plastering and Color washing to the Control Panel Board Including all Charges etc'(MS Kiosk )
25Supplying and delivery of GI/ PVC Pipes and Specials solvent paste including all material to site and all labour charges for work Manship etc.,complete
26GI 50 mm Flange set
27GI 50 mm Elbow
28GI 50 mm Union
29Clamp set with Iron Work
30GI 50 mm H Nipple
31GI Non Return Valve 50 mm dia
32Solvent paste
33Air valvu set
34Supply and run of 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 69
35(19 Kg) No.8 SWG GI wire (1KG=1.50m) ITEM NO 5 (3C)
36Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection
37Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains SD 49
38Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes
39GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58515408
AUTHORITY Local Bodies
TENDER VALUE 15 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Deepaing Of Exiting Open Well With Steining Wall And 7.5Hp Moter , Hdpe Pipe Near Kalliyamman Kovil At Kodugal Head Of Pachamalai Panchayat, Gangavalli Block In Salem District
Basic Detail
Tender No RocNo.2294/2026/T6
Bidding Type Tender
Location
City Salem
State Tamil Nadu
Key Dates
Publish Date 13 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 15 Lakhs
Tender Fee Ref. Documents
EMD 15000
Exemption Not Available
Document List
2dc74bdc-0cb0-4127-9de8-5f0525c3df00.html
BOQ_871695.xls
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

2dc74bdc-0cb0-4127-9de8-5f0525c3df00.html

xls

BOQ_871695.xls

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender