Tender For Improvement Of Pator Timung Gaon Road At Bahani Adarsha, L= 1.30 Km Under Aap 2023-24.
Tender Value
73.27 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
19 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
1466
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karbi Anglong → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Pator Timung Gaon Road At Bahani Adarsha, L= 1.30 Km Under Aap 2023-24.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtainedfrom borrow pits with all lifts and leads, transporting to site, spreading, grading torequired slope and compacted to meet requirement of Table 300.2 with lead upto1000 m as per Technical Specification Clause 303.1. i)private land |
| 2 | Construction of granular sub-base by providing well graded material, spreading inuniform layers with motor grader on prepared surface, mixing by mix in placemethod with rotavator at OMC, and compacting with smooth wheel roller toachieve the desired density, complete as per Technical Specification Clause401.(ii) For Grading II Material |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness,handpacking rolling withsmooth wheelroller 80-100kNin stagesto proper handpacking, rolling withsmooth wheelroller 80-100kNin stagesto propergrade and camber, applying and brooming,stone screening/binding materials tofill-up the interstices of coarse aggregate, watering and compacting to therequired density grading 2 as per Technical Specification Clause 405.Gradind-II A)By manual means |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80-100 kN in stages to propergrade and camber, applying and brooming, stone screening to fill-up theinterstices of coarse aggregate, watering and compacting to the required densityGrading 3 as per Technical Specification Clause 405.A) By manual means |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on preparedsurface of granular base including cleaning of road surface and spraying primerat the rate of 0.70-1.0 kg/sqm using mechanical means as per TechnicalSpecification Clause 502 |
| 6 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granularsurfaces treated with primer & cleaned with Hydraulic broom as per TechnicalSpecification Clause 503. |
| 7 | Semi - Dense Bituminous Concrete:Providing and laying semi densebituminous concrete with 100-120 TPH batch type HMP producing anaverage output of 75 tonnes per hour using crushed aggregates ofspecified grading, premixed with bituminous binder @ 4.5 to 5% of mixand filler transporting the hot mix to work site, laying with a hydrostaticpaver finisher with sensor control to the reqd. grade, lavel andalignment,rolling with smooth wheeled,vibratory and tandem rollers toachieve the desired compaction as per MoSRT&H cl. no.508. completein all respect. including carriage of mixed materials up to 10.0 Km initiallead from mixing plant ) (Including cost of testing of materials at site andlaboratory as directed by the deptt.) |
| 8 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of encapsulated lens type reflective sheeting videClause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below ground level as per drawings and TechnicalSpecification Clause 801 600mm equilateral triangle |
| 9 | 600mm circular |
| 10 | 800mm*600mm rectangular |
| 11 | Providing and fixing of typical PMGSY informatory sign board with Logo as perMORD specifications and drawing. Three MS Plates of 1.6 mm thick, top andmiddle plate duly welded with MS flatiron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x5mm. The angle iron frame of the lower most plate and flat iron frame of middleplate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts dulyembedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm,600mm below ground level. The top most diamond plate will be welded to middleplate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stoveenameled on both sides. Lettering and printing arrows, border etc. will bepainted with ready mixed synthetic enamel paint of superior quality in requiredshade and colour. All sections of framed posts and steel tube will be painted withprimer and two coats of epoxy paint as per drawing Clause 1701 and Annexure1700.1 |
| 12 | Construction of 1000 mm dia. NP-3 HP Culvert Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender