Housing Urban and Rular Development Government Departments Closing in 10 days TDR #58515219

Tender For Construction Of Auditorium ( Capacity 495 Seats) At School Of Eminence Nangal (Distt) Rupnagar. (Electrical Low Voltage Services)

Issued by Government Departments · Chandigarh, Chandigarh
Tender Value
1 Crore
Estimated cost
Bid Submission
27 Nov 2026
10 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Auditorium ( Capacity 495 Seats) At School Of Eminence Nangal (Distt) Rupnagar. (Electrical Low Voltage Services)

BOQ

Name of Work:- Construction of Auditorium ( Capacity 495 seats) at School of Eminence Nangal (Distt) Rupnagar. (Electrical Low Voltage Services)
Sl. No. Item Description
1Provision for Audio and Video Systems Supply, Installation, testing and commissioning of Speaker shall be a Professional passive full-range two-way loudspeaker comprising one 12-inch low-frequency woofer and one high-frequency compression driver, designed for fixed installation sound reinforcement applications. The loudspeaker shall have a frequency response of 60Hz to 18kHz (-3dB) and a frequency range extending from 50Hz to 20kHz (-10dB) or better. The system shall provide a nominal coverage pattern of 100° horizontal × 60° vertical through a constant-directivity waveguide. The loudspeaker shall deliver a sensitivity of 97dB (1W/1m) or better and a maximum peak sound pressure level of 130dB SPL or higher. The system shall have a nominal impedance of 8 ohms and a continuous power handling capacity of 600W RMS or higher with peak power handling of 2400W or higher. The loudspeaker shall incorporate a passive crossover network with integrated high-frequency protection. The enclosure shall be constructed from weather-resistant plywood or equivalent high-strength composite material and shall include a powder-coated corrosion-resistant metal grille. The loudspeaker shall be suitable for indoor and outdoor installations with a minimum IP44 rating. The unit shall support multiple suspension and mounting options for permanent installation application. Complete in all respect as desired by the engineer in charge at site.
2Supply, Installation, testing and commissioning of OEM frames/ Hanging/ Mounting arrangement for Suspension of offered above, Shall offer multiple rigging points for achieving desired pitch settings. complete in all respect as desired by the engineer in charge at site.
3Supply, Installation, testing and commissioning of Professional passive low-frequency subwoofer loudspeaker comprising one 18-inch high-excursion low-frequency transducer, designed for fixed installation and sound reinforcement applications. The subwoofer shall have a frequency response of 45Hz to 250Hz (-3dB) and a usable frequency range extending from 35Hz to 300Hz (-10dB) or better. The system shall provide a sensitivity of 97dB (1W/1m) or higher and be capable of delivering a maximum peak sound pressure level of 130dB SPL or greater. The loudspeaker shall have a nominal impedance of 8 ohms and a continuous power handling capacity of 600W RMS or higher, with peak power handling of 2400W or greater. The enclosure shall be constructed from weather-resistant plywood or equivalent high-strength composite material and incorporate a heavy-duty, corrosion-resistant metal grille. The loudspeaker shall be optimized for use with full-range installation loudspeakers and shall support suspended, wall-mounted, or ground-stacked installation configurations. complete in all respect as desired by the engineer in charge at site.
4Supply, Installation, testing and commissioning of Speaker shall be a Professional surface-mount two-way full-range loudspeaker comprising one 5.25-inch low-frequency woofer and one 1-inch high-frequency driver, designed for foreground/background music and speech reinforcement applications. The loudspeaker shall have a frequency response of 65Hz to 20kHz or better and shall provide a sensitivity of 88dB (1W/1m) or higher. The system shall be capable of delivering a maximum SPL of 105dB or higher and shall have a nominal impedance of 8 ohms. The loudspeaker shall incorporate an integrated 70V/100V transformer with multiple selectable power taps and low-impedance bypass operation. Coverage shall be 110° conical or wider to ensure uniform sound distribution. The loudspeaker shall support a minimum continuous power handling of 60W RMS and peak power handling of 240W or higher. The enclosure shall be constructed from UV-resistant engineered polymer with a corrosion-resistant powder-coated metal grille and shall be suitable for indoor and outdoor installations with a minimum IP55 weather-resistance rating. The loudspeaker shall include an adjustable wall-mount bracket and concealed cable management for professional installation applications. complete in all respect as desired by the engineer in charge at site.
5Supply, Installation, testing and commissioning of Speaker shall be a Professional surface-mount two-way full-range loudspeaker comprising one 8-inch high-excursion low-frequency woofer and one high-frequency compression driver or dome tweeter, designed for foreground/background music, speech reinforcement, and distributed audio applications. The loudspeaker shall have a frequency response of 80Hz to 20kHz or better and shall provide a sensitivity of 90dB (1W/1m) or higher. The system shall be capable of delivering a maximum SPL of 120dB or higher and shall have a nominal impedance of 8 ohms. The loudspeaker shall incorporate an integrated 70V/100V transformer with multiple selectable power taps and low-impedance bypass operation. Coverage shall be 90° horizontal × 90° vertical or wider to ensure uniform sound distribution. The loudspeaker shall support a minimum continuous power handling of 200W RMS and peak power handling of 800W or higher. The enclosure shall be constructed from UV-resistant engineered polymer or equivalent weather-resistant material with a corrosion-resistant powder-coated metal grille and shall be suitable for indoor and outdoor installations with a minimum IP54 rating. The loudspeaker shall include an adjustable mounting bracket and concealed cable management for professional installation applications. complete in all respect as desired by the engineer in charge at site.
6Supply, Installation, testing and commissioning of Professional Class-D multi-channel network power amplifier with integrated DSP and network audio capability, designed for installed sound reinforcement and distributed audio applications. The amplifier shall provide four independent output channels with a total power output of 1200W or higher, supporting flexible power allocation across channels. The amplifier shall support low-impedance (2Ω, 4Ω, 8Ω). The unit shall have a frequency response of 20Hz to 20kHz (±1dB) or better, a signal-to-noise ratio of 100dB or higher. The amplifier shall incorporate onboard DSP with configurable parametric equalization, crossover filters, delay, loudspeaker protection, limiting, signal routing, and preset management. The amplifier shall include comprehensive protection features such as thermal protection, overload protection, short-circuit protection, DC protection, and load monitoring. The unit shall be rack-mountable, suitable for continuous operation in professional installations, and operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site.
7Supply, Installation, testing and commissioning of Professional Class-D multi-channel network power amplifier with integrated DSP and network audio capability, designed for installed sound reinforcement and distributed audio applications. The amplifier shall provide four independent output channels with a total power output of 4800W or higher, supporting flexible power allocation across channels. The amplifier shall support low-impedance (2Ω, 4Ω, 8Ω). The unit shall have a frequency response of 20Hz to 20kHz (±1dB) or better, a signal-to-noise ratio of 100dB or higher, and total harmonic distortion of less than 0.1%. The amplifier shall incorporate onboard DSP with configurable parametric equalization, crossover filters, delay, loudspeaker protection, limiting, signal routing, and preset management. The amplifier shall include comprehensive protection features such as thermal protection, overload protection, short-circuit protection, DC protection, and load monitoring. The unit shall be rack-mountable, suitable for continuous operation in professional installations, and operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site.
8Supply, Installation, testing and commissioning of Professional full-range surface-mount loudspeaker designed for indoor and outdoor background music, paging, and voice alarm applications. The loudspeaker shall incorporate multiple full-range drivers in a compact enclosure and provide a frequency response of 80Hz to 20kHz or better. The system shall have a sensitivity of 85dB (1W/1m) or higher and be capable of delivering a maximum sound pressure level of 100dB SPL or greater. The loudspeaker shall be comprised of a min 2.25 inch driver or better have a nominal impedance of 8 ohms and include an integral 70V/100V 6/8/16 watt or others line transformer with multiple selectable power taps and low-impedance bypass operation. Coverage shall be 100° × 100° or wider to ensure uniform sound distribution across the listening area. With a minimum IP44 environmental protection rating. The system shall support wall-mount installation. complete in all respect as desired by the engineer in charge at site.
9Supply, Installation, testing and commissioning of Professional integrated mixer amplifier designed for background music, paging, and distributed audio applications. The amplifier shall deliver a minimum 100W output power for 70V/100V constant-voltage loudspeaker systems and support multiple loudspeaker connections for wide-area coverage. The unit shall provide a frequency response of 70Hz to 18kHz or better and total harmonic distortion of 0.5% or less. It shall feature integrated DSP processing with equalization, loudspeaker presets, dynamic processing, speech optimization, feedback suppression, and system protection functions. The amplifier shall support a minimum of 4 audio input channels, including balanced microphone/line inputs and stereo line inputs, along with Bluetooth audio streaming capability. The unit shall provide front-panel control and display for system configuration. The amplifier shall incorporate fanless convection cooling for silent operation and include priority paging functionality with selectable input priorities. The unit shall operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site.
10Supply, Installation, testing and commissioning of Professional networked digital signal processor (DSP) and audio matrix platform designed for conferencing, public address, background music, and integrated AV applications. The DSP shall feature a high-performance 32-bit fixed/floating-point processing architecture with advanced audio signal processing and routing capabilities. The unit shall provide a minimum of 8 balanced analog audio inputs and 8 balanced analog audio outputs, individually configurable for microphone or line-level operation. The DSP shall provide configurable signal processing functions including automatic mixing, matrix mixing, equalization, filtering, dynamics processing, feedback suppression, delay, crossover functions, room combining, signal routing, logic control, and loudspeaker management. The system shall support USB audio interfacing, GPIO integration, remote control interfaces, and centralized configuration, monitoring, and diagnostics through dedicated software. The processor shall provide a frequency response of 20Hz to 20kHz, dynamic range of 110dB or greater, THD+N of 0.01% or less, and channel separation better than 100dB. The unit shall support management of networked audio devices and integration with third-party AV control systems. The processor shall be rack-mountable and operate from a universal 100–240V AC power supply. complete in all respect as desired by the engineer in charge at site.
11Supply, Installation, testing and commissioning of Professional desktop gooseneck condenser microphone system designed for conferencing, boardrooms, lecture halls, council chambers, and speech reinforcement applications. The microphone shall feature a gooseneck length of 450mm or greater with a flexible design for precise positioning. The system shall utilize a condenser microphone element with interchangeable or selectable cardioid, super-cardioid, omnidirectional, or bidirectional pickup patterns to suit varying application requirements. The microphone shall provide a frequency response of 50Hz to 20kHz or better, a signal-to-noise ratio of 80dB or higher, equivalent noise level of 20dB-A or lower, and maximum SPL handling of 120dB or greater. The microphone shall support balanced audio output via XLR or mini-XLR interface and include an integrated desktop base with programmable mute/unmute switch and LED status indication. The system shall incorporate RF interference protection, low handling noise, and provisions for phantom-powered operation. The microphone shall be suitable for permanent or portable installation in professional speech and conferencing environments. complete in all respect as desired by the engineer in charge at site.
12Supply, Installation, testing and commissioning of Professional wireless headworn microphone system comprising a UHF wireless receiver, bodypack transmitter, and lightweight headworn condenser microphone, designed for speech reinforcement, presentations, education, houses of worship, and live performance applications. The system shall operate in the UHF frequency band with selectable frequencies/channels and provide reliable wireless performance with a minimum operating range of 50 meters under clear line-of-sight conditions. The headworn microphone shall feature a directional pickup pattern for improved speech intelligibility and feedback rejection. The system shall provide a frequency response of 50Hz to 18kHz or better, a signal-to-noise ratio of 100dB or higher, total harmonic distortion of less than 1%, and maximum SPL handling of 125dB or greater. The receiver shall provide both balanced XLR and unbalanced audio outputs and support diversity reception technology for stable RF performance. The bodypack transmitter shall offer a minimum operating time of 6 hours on standard batteries or rechargeable power sources. The system shall include RF and audio level monitoring, transmitter mute functionality, battery status indication, and automatic frequency synchronization between transmitter and receiver. The equipment shall be suitable for professional indoor installations and portable sound reinforcement applications. complete in all respect as desired by the engineer in charge at site.
13Supply, Installation, testing and commissioning of Professional wireless handheld microphone system comprising a UHF wireless receiver and handheld transmitter with integrated dynamic or condenser microphone capsule, designed for speech reinforcement, presentations, conferencing, education, houses of worship, and live sound applications. The system shall operate in the UHF frequency band with a minimum of 40 selectable channels/frequencies and provide reliable wireless performance with an operating range of 50 meters or greater under clear line-of-sight conditions. The handheld microphone shall feature a cardioid or super-cardioid pickup pattern for enhanced speech intelligibility and feedback rejection. The system shall provide a frequency response of 40Hz to 18kHz or better, a signal-to-noise ratio of 100dB or higher, and total harmonic distortion of less than 0.5%. The receiver shall provide both balanced XLR and unbalanced audio outputs and support diversity reception technology for stable RF performance. The handheld transmitter shall include RF synchronization, battery status indication, mute functionality, and a rugged metal construction suitable for professional use. The system shall incorporate RF and audio metering, automatic frequency setup, and interference-resistant operation for dependable performance in demanding environments. complete in all respect as desired by the engineer in charge at site.
14Supply, Installation, testing and commissioning of Professional wireless microphone receiver designed for use with handheld and bodypack transmitters in speech reinforcement, conferencing, education, houses of worship, and live sound applications. The receiver shall operate in the UHF frequency band using PLL synthesized frequency control and diversity reception technology to ensure stable and interference-resistant wireless performance. The receiver shall support a minimum of 40 selectable channels/frequencies and provide a frequency response of 40Hz to 18kHz or better. The unit shall achieve a signal-to-noise ratio of 100dB or higher and total harmonic distortion of less than 0.5%. The receiver shall provide both balanced XLR audio outputs and unbalanced audio outputs for integration with professional and commercial audio systems. The unit shall support automatic transmitter synchronization, RF and audio signal metering, frequency scanning, channel selection, and monitoring functions. The receiver shall provide a wireless operating range of 50 meters or greater under clear line-of-sight conditions and shall include front-panel status indicators for RF signal, audio signal, frequency, and transmitter battery condition. The unit shall operate from a universal 100–240V AC power supply or external DC power source and shall consume 10W or less. The receiver shall be suitable for rack-mount or desktop installation in professional audio environments. complete in all respect as desired by the engineer in charge at site.
15Supply, Installation, testing and commissioning of Wired Handheld Microphone Microphone with Uniform cardioid pickup pattern, Frequency response: 50 to 15,000 Hz, Sensitivity (at 1,000 Hz Open Circuit Voltage) –54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL, Impedance Rated impedance is 150Ω (300Ω actual) for connection to microphone inputs rated low impedance complete in all respect as desired by the engineer in charge at site.
16Supply, Installation, testing and commissioning of Professional compact audio mixing console designed for live sound reinforcement, conferencing, houses of worship, educational facilities, and portable audio applications. The mixer shall provide a minimum of 24 microphone/line input channels and multiple stereo input channels, supporting simultaneous connection of microphones, instruments, playback devices, and external audio sources. The unit shall feature high-quality microphone preamplifiers with switchable +48V phantom power for condenser microphones. Each mono input channel shall include 3-band equalization with sweepable mid-frequency control, while stereo channels shall provide dedicated equalization controls. The mixer shall support a minimum of 2 auxiliary sends with pre/post-fader selection for monitor mixes and external effects processing. The console shall include channel insert points, peak indication LEDs, mute functionality, smooth long-throw faders, and comprehensive input gain controls. The mixer shall provide stereo main outputs, monitor outputs, headphone outputs, recording outputs, and playback inputs for complete system integration. The unit shall feature LED level metering, onboard effects processing or external effects integration capability, and USB audio interface functionality for recording and playback. The mixer shall be housed in a robust chassis suitable for portable and fixed installations and shall operate from a universal AC power supply. complete in all respect as desired by the engineer in charge at site.
17Supply, Installation, testing and commissioning of 16-port PoE+ Gigabit Ethernet switch features 16 Gigabit Ethernet ports and 2 SFP uplinks, offering 18 Gbps forwarding bandwidth and 36 Gbps switching bandwidth. It operates on an ARM v7 800 MHz CPU with 512 MB DRAM and 256 MB flash memory, delivering a forwarding rate of 26.78 Mpps. Designed for reliability, it is fanless for silent operation and compact with a depth of 10.69 inches. It supports CLI and web UI management, sFlow network monitoring, 802.1X security, SPAN, BPDU Guard, and Bluetooth-enabled device management. With an enhanced limited lifetime warranty, it ensures long-term performance and security. complete in all respect as desired by the engineer in charge at site.
18Supply, Installation, testing and commissioning of 2 core 12 AWG/4 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant complete in all respect as desired by the engineer in charge at site.
19Supply, Installation, testing and commissioning of 2 core 14 AWG/2.5 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant complete in all respect as desired by the engineer in charge at site.
20Supply, Installation, testing and commissioning of 22 AWG 2-Core Foil Shielded Audio/Microphone Cable with 7 strand annealed bare copper conductors complete in all respect as desired by the engineer in charge at site.
21Supply, Installation, testing and commissioning of Floor Box with 4x Mic In, 1x Speaker Out and 1x Power Socket. complete in all respect as desired by the engineer in charge at site.
22Supply, Installation, testing and commissioning of Connectors like LAN, CAT 6 Sheilded, RCA, XLR etc complete in all respect as desired by the engineer in charge at site.
23Supply, Installation, testing and commissioning of 32 U metal equipment rack with power strip and fan complete in all respect as desired by the engineer in charge at site.
24Stage Curtain System Supply, Installation, testing and commissioning of Main Valance Bar, length 23 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders including Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 300 GSM, duly stitched along with eyelets. Size : 23 x 1.3 Meter. complete in all respect as desired by the engineer in charge at site.
25Supply, Installation, testing and commissioning of Main Curtain track system 23 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. 4mm steel wire rope, 1 HP motor two nos. Micro switches for auto stop • GI wire ropes with steel core at center.• Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley• MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness.• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. It includes Fire retardant velvette fabric with lining 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 300 GSM, duly stitched along with eyelets.Size : 24 x 6.0 Meter. Complete in all respect as desired by the engineer in charge at site.
26Supply, Installation, testing and commissioning of Rear Curtain track system 23 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. 4mm steel wire rope, 1 HP motor Crompton/Siemens/Havells), two nos. Micro switches for auto stop • GI wire ropes with steel core at center.• Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track.• Diverter pulley• MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness.• All the materials under gone through 7 tank process with various chemicaltreatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. It includes Fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size : 24 x 6.0 Meter. Complete in all respect as desired by the engineer in charge at site.
27Supply, Installation, testing and commissioning of Frill Bar, length 16.5 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. Including Fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size : 16.5 x 1.3 Meter complete in all respect as desired by the engineer in charge at site.
28Supply, Installation, testing and commissioning of MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications:• Wing Frame Size 6 x 2 Mtr• 1.5meter wing track of 48x84mm with grid mount brackets made of 40X50X40mm C track,• Pivotable 4 wheeled suspension trolley,• Adjustable floor locking screw jacks with rubber grips,• Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp,• Heavy duty wing track to be laid for minimum length of 1.5mtr, along the width of the stage.• 360° Rotatable and can move in unidirectional• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.It includes Fire retardant cotton fabric 0% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size : 6.0 x 4.1 Meter. Complete in all respect as desired by the engineer in charge at site.
29Supply, Installation, testing and commissioning of Motor Cable Termination box for power cable termination at grid level. For Front & Rear Curtain.• MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap.• Grey terminal connector with each line having L1, L2, L3, E, 6 ,2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection)• Box door must be made with Hingeable door with screw lock.• Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing• MS Boxe made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powdercoated with Matt black texture finish. complete in all respect as desired by the engineer in charge at site.
30PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2 Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer in charge:-
31Overall size 4.0sq.mm (56/0.3mm), 2Core.
32Supply and erection of XLPE/PVC insulated PVC sheathed (10 core) unarmoured copper conductor cable (ISI marked) confirm to IS:7098 (PART-I), 1988 loose in the existing trench or pipe with suitable size of copper thimbles/lugs complete in all respect as desired by the Engineer in charge:-
33Overall size 1.5sq.mm (10 Core).
34Provision for Auditorium/Stage Lighting SystemSupply, Installation, testing and commissioning of 54 x 3W LED PAR Light with latest RDM technology for user friendly operation with below specifications:• Base Color RGBW Color Mixing• LED Configuration : Multiple Nos Individual RGBW LED Configuartion• Power cable: 3 core 1 sq. mm. copper PVC insulated• Channels: 8 DMX-512• Beam angle: 15°• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, Sound Active• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: >10,500 @ 15° Beam Angle• Dimming: 0 - 100% Electronic Dimming• Function: strobe, dimming, sound active and Master slave.• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish.• Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 3/5 Pin XLR connectors.complete in all respect as desired by the engineer in charge at site.
35Supply, Installation, testing and commissioning of 200W LED Profile Spot Light with latest RDM technology for user friendly operation with below specifications:• Light Source : Single LED COB Source• Color Temerature : 3200K, CRI & TLCI Value > 95• Power cable: 3 core 1 sq. mm. copper PVC insulated• Channels: 1/2/3 DMX-512 Channel Modes• Beam Angle : 19° or 15° or 20°• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• Lux output at 2 Mtr : > 20,000 Lux @ 19° or 15° or 20°• Dimming: 0 - 100% Electronic Dimming • 4 Beam shaping shutters• Accessory slot for Gobo and gobo holder, Iris & Color Frame should be available or else fixture will be rejected.• Housing: Metal Housing with black epoxy polyster powder coated finish or PVC Body with matt black finish• Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 3/5 Pin XLR connectors.complete in all respect as desired by the engineer in charge at site.
36Supply, Installation, testing and commissioning of 54 x 3W LED PAR Light with latest RDM technology for user friendly operation with below specifications:• Base Color 3200K Color Mixing• Color Temperature : 3200K with CRI > 90• LED Configuration : Multiple Nos Individual 3200K LED Configuartion• Power cable: 3 core 1 sq. mm. copper PVC insulated• Channels: 1 DMX-512• Beam angle: 15°• Control mode: RDM, DMX512 & Manual• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: >7,500 @ 15° Beam Angle• Dimming: 0 - 100% Electronic Dimming• Function: strobe, dimming, sound active and Master slave.• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish.• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 3/5 Pin XLR connectorscomplete in all respect as desired by the engineer in charge at site.
37Supply, Installation, testing and commissioning of 19*15W LED Bee Eye Moving head wash light , 4 in one(RGBW), 8°-26° * Dimming: 0-100% linear adjustment.* Color mixing: RGBW stepless color mixing.* Strobe: 1-25 times/sec (conventional strobe, thunder strobe, random strobe, suddenly dark gradually brighter strobe, suddenly bright gradually darker strobe).* Scan range: X-axis 540 degrees, with self-recovery closed-loop system; Y-axis 270 degrees, with self-recovery closed-loop system.* Scanning fine-tuning: X/Y axis 16BIT scanning subdivision for accurate positioning.2.Input voltage: AC110V-240V 50/60Hz ,188W3.Light source: 19*15W(4IN1)4.Average lifespan: 50000H5.Focusing range: 8°-26°6.Control mode: DMX512 signal control mode, master-slave control mode (multiple device synchronization) with self-propelled program voice control mode.7.Channel : 16/24 channels8.Fixture material: High temperature resistant plastic + molded alloy material + heat dissipation method / air cooling9.Protection class: IP20• 2.5 m Power In + 0.5 m Power out or 3 Mtr 3 core 1 mm² FRLS & ISI mark cable with 3pin IEC Male Plug• 3 mtr DMX loop cable with cable mount 3/5 pin locking XLRcomplete in all respect as desired by the engineer in charge at site.
38Supply, Installation, testing and commissioning of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications.• Lock - MS threaded Galvanized lock key,• Plastic Glass filled nylon moulded M6 key.• Receptacle - 28mm standard TV spigot.• Safety - MS Galvanized chain with pin.• Finish - Pretreated and black epoxy polyester powder coated.complete in all respect as desired by the engineer in charge at site.
39Supply, Installation, testing and commissioning of Customized MS Suspenders made up of • MS fish plate 150 x 150 x 6 mm with hardware’s if required as per site condition • MS Angle 40 x 40 x 5 mm or higher size required length as per site condition to Hold the \\"C\\" track rigidly held With SWL of 200kg. (As per site requirement).• Height adjustable M12 stud of suitable length as per site requirement along with suitable hardware’s with pipe coupler clamp. (As per site requirement).• All the materials under gone through 7 tank process with various chemicaltreatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. complete in all respect as desired by the engineer in charge at site.
40Supply, Installation, testing and commissioning of Fixed Stage Light Bar, length 16.5 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety.• Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength• With Suitable Suspenders to fix the light bar with every 2mtr pitch.complete in all respect as desired by the engineer in charge at site.
41Supply, Installation, testing and commissioning of Motorised FOH Light bar Suitable Length 9.5 Mtrs as per site requiremnents, Suitable Capacity 3 Phase AC Motor with DC Brake & Gear box with black epoxy polyester powder coated with 4mm steel wire rope, 1 HP motor Crompton/Siemens/Havells), following specifications -• 40NB, 48mm OD dual barrel dual construction arrangement with MS Flat in every 2 m and with 40x75 Cable trunking with lid. 4mm steel wire rope, 1 HP motor Crompton/Siemens/Havells), two nos. Micro switches for auto stop • MS fabricated cable retractor made up of CRCA MS Sheet 1300mm each length with hinge rod• Specially designed compact 80:1 Worm reduction gear box, B5 Flange.• Double Cam type Upper and lower limit controller 5mm, 6x19 GI wire rope preformed for lifting the Light bar• Pile winding type winch with MS circular Plates for rope winding • Safe Working Load 180 kgcomplete in all respect as desired by the engineer in charge at site.
42Supply, Installation, testing and commissioning of MS Side Lighting Ladder of suitable length and Width (Min 2400 mm Height & 600 mm Width)• Made using 40NB, 48MM OD, 2mm thickness MS Pipe• Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size• Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp,• Heavy duty Ladder Track to be laid throughout the depth of the stage.• 360° Rotatable and can move in unidirectional• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.complete in all respect as desired by the engineer in charge at site.
43Supply, Installation, testing and commissioning of MS Fabricated 3/5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. complete in all respect as desired by the engineer in charge at site.
44Supply, Installation, testing and commissioning of MS Fabricated 3/5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. complete in all respect as desired by the engineer in charge at site.
45Supply, Installation, testing and commissioning of Fabricated 3/5 pin DMX Signal loop Junction box fitted with 5 pin DMX Male & Female socket with 0.3 Mtr DMX Loop cable fitted with 5 pin DMX cable mount plug, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. complete in all respect as desired by the engineer in charge at site.
46Supply, Installation, testing and commissioning of RDM Compatible DMX Splitter unit with Minimum following specifications.● 1 Nos 3/5 Pin DMX In socket and 8 Nos 3/5 Pin DMX Out socket● In and out signal Optically Isolated● LED Indicator for check the signal flow in output.●Suitable for standard 19” cabinet● Duly black epoxy polyester powder coated texture finish.complete in all respect as desired by the engineer in charge at site.
47Supply, Installation, testing and commissioning of Digital Lighting Console with Ultimate portability, offering a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights.• 1024 DMX Channel• LDC Screen for easy Navigation• DMX compatible• Control up to 96 LED, moving lights and conventionals individuals• multi-function faderscomplete in all respect as desired by the engineer in charge at site.
48Supply, Installation, testing and commissioning of 3/5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination. complete in all respect as desired by the engineer in charge at site.
49Supply, Installation, testing and commissioning of 3/5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination. complete in all respect as desired by the engineer in charge at site.
50Supply, Installation, testing and commissioning of DMX Signal 2 OR 4 core + Ground shielding Cable with CE mark for the Signal network. complete in all respect as desired by the engineer in charge at site.
51PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2 Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer in charge:-
52Overall size 4.0sq.mm (56/0.3mm), 2Core.
53Supply and erection of XLPE/PVC insulated PVC sheathed (10 core) unarmoured copper conductor cable (ISI marked) confirm to IS:7098 (PART-I), 1988 loose in the existing trench or pipe with suitable size of copper thimbles/lugs complete in all respect as de
54Overall size 1.5sq.mm (10 Core).
55Video system Supply, Installation, testing and commissioning of 2.5mm pixel pitch indoor led video wall of size: 20.997 feet (Width) x 12.598 feet (Height) = 264.52 sq.feet. It shall have a resolution of: 2560 pixels x 1536 pixels.The LED display shall have a pixel pitch of 2.5mm using SMD2121 LEDs, with a module resolution of 128 × 64 = 8192 pixels, pixel density of 160,000 dots/㎡, and a module size of 320mm (W) × 160mm (H). The display shall support full front maintenance, have an IP30 ingress protection rating, and a planeness of ≤0.5mm. It shall support single-dot brightness calibration, provide a brightness of 600 cd/㎡, and offer an adjustable color temperature from 2000K to 9300K. The display shall feature a beam angle of 140° horizontal and 140° vertical, brightness/color uniformity of ≥98%, and a contrast ratio of 5000:1. The maximum power consumption shall be 488 W/㎡, with a typical power consumption of 146 W/㎡, and it shall operate on AC 200–240V, 47–63Hz power supply. The display shall support a frame changing frequency of 60Hz, refresh rate of 3840Hz, processing depth of 12~14Bit, and 2K video input support. The LED display shall have a life span of 100,000 hours, an operating environment of -20℃ to +45℃ with 10%~60% RH (non-condensing), and a storage environment of -20℃ to +50℃ with 10%~65% RH (non-condensing). including MS frame work It shall be BIS, CE, FCC, ROHS certified. It includes a suitable video wall controller and Installation complete in all respect as desired by the engineer in charge at site.
56Supply, Installation, testing and commissioning of Digital podium. It shall comprise a Computer with an Intel Core i5 (2.0GHz+) processor, Windows 10 OS, 8GB+ RAM, and 1TB+ HDD storage. The Design shall feature free-standing mounting, a polycarbonate/metal body with steel frame and soft wheels, and a security mechanism ensuring no exposed ports when locked. The display shall utilize Dual EMR + PCAP (finger + 2mm stylus) technology and provide a 21.5\\" (53.0cm) display with 1920×1080 (FHD) or better resolution and 16:9 aspect ratio. Connectivity shall include 1 × USB, 1 × DVI/HDMI port. Display performance shall offer 4000 LPI interactive resolution, 5ms response time, and 170° (H) / 160° (V) viewing angles. Input technology shall support finger + stylus touch, ±0.5mm reading accuracy (center), 200 points/sec tracking speed, and 1024 levels of pen pressure. The Front Controller shall provide HDMI, USB 3.0 ×2, and Audio IN ports, along with Volume Up/Down, Mute, Source Switch (HDMI inputs), and Power controls. The Rear Controller shall include USB 3.0 ×2, RCA Audio IN ×1, RCA Output ×2, HDMI In ×2, HDMI Out ×2, Programming Port, and USB ports. HDMI features shall include a built-in repeater supporting up to 15m HDMI cable length, and video output shall support 4K UHD (3840 × 2160 native) resolution. Power requirements shall be 5V DC (adapter included). The system shall include a built-in microphone of phantom-powered gooseneck (XLR output) type with a length of ≥21.5cm, featuring ON/OFF switch with LED, permanently polarized condenser, and hyper-cardioid characteristics. It includes 2 sets of HDMi transmitter and receiver which shall operate at 4k@100m. complete in all respect as desired by the engineer in charge at site. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58515219
AUTHORITY Government Departments
TENDER VALUE 1 Crore
LAST DATE 27-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Auditorium ( Capacity 495 Seats) At School Of Eminence Nangal (Distt) Rupnagar. (Electrical Low Voltage Services)
Basic Detail
Tender No Tender Notice No 44
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 13 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 1 Crore
Tender Fee 10000
EMD 2 Lakhs
Exemption Available
Document List
BOQ_365505.xls
caa36ad1-afe2-4d9c-b357-f9dfb39aab93.html
SBD10046905.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_365505.xls

html

caa36ad1-afe2-4d9c-b357-f9dfb39aab93.html

pdf

SBD10046905.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender