Tender For Construction Of Jharcraft Emporium At Ratu Road Ranchi In The District Of Ranchi State Jharkhand.
Tender Value
1.90 Crore
Estimated cost
Bid Submission
04 Dec 2026
15 days left
EMD
3.80 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Jharcraft Emporium At Ratu Road Ranchi In The District Of Ranchi State Jharkhand.
BOQ
| Sl. No. | Item Description |
| 1 | Particulars with Specification |
| 2 | Dismantling plain cement or lime concrete work including stacking servieable materials in countable stacks within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Floor Area: 1 No. × Length 7.05 m × Width 7.84 m × Depth 0.10 m = 5.527 CumTotal Quantity = 5.527 Cum |
| 3 | Dismantling dressed stone work ahhlar face stone work,marble work or orecast concrete work manually and disposal of unserviceable material within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Granite Flooring: 1 No. × Length 7.05 m × Width 7.84 m = 55.272 SqmTotal Quantity = 55.272 Sqm |
| 4 | Dismantling aluminum/Gypsum partition.doors.windows,fixed glazing and false ceiling including disposal of unservieable materials and stacking of serviceable materials with in 50 M leads all lead as per directed by E/I• False Ceiling: 1 No. × L 7.05 m × W 7.85 m = 55.342 Sqm• Trail Room: 1 No. × L 1.82 m × W 2.10 m = 3.822 Sqm• Wall Panelled (Wall 1): 2 Nos. × L 7.85 m × H 3.00 m = 47.100 Sqm• Wall Panelled (Wall 2): 1 No. × L 7.05 m × H 3.00 m = 21.150 Sqm• Wall Panelled (Wall 3): 2 Nos. × L 2.10 m × H 3.00 m = 12.600 Sqm• Wall Panelled (Wall 4): 2 Nos. × L 1.82 m × H 3.00 m = 10.920 Sqm• Glazed Recks: 14 Nos. × L 3.60 m × W 0.60 m = 30.240 Sqm• Glazed Recks Ends: 1 No. × L 0.45 m × W 0.60 m = 0.270 SqmTotal Quantity = 181.445 Sqm |
| 5 | Providing and laying in position ( P.C.C) M-200 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size)• Concrete Bed: 1 No. × Length 7.05 m × Width 7.85 m × Depth 0.10 m = 5.534 CumTotal Quantity = 5.534 Cum |
| 6 | Providing and fixing panelled or panelled and glazing in panelled or panelled and glazed shuttera for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) comforming to IS: 1328(a) For Kurta Reck: - Horizontal (Top): 2 Nos. × Length 1.82 m × Width 0.76 m = 2.766 Sqm - Horizontal Shelves: 8 Nos. × Length 1.82 m × Width 0.60 m = 8.736 Sqm - Horizontal Shelf: 4 Nos. × Length 1.82 m × Width 0.60 m = 4.368 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.40 m = 6.432 Sqm - Vertical Divider: 2 Nos. × Length 0.60 m × Height 2.40 m = 2.880 Sqm - Back Panel: 2 Nos. × Length 1.82 m × Height 2.40 m = 8.736 Sqm - Shelves Sides: 4 Nos. × Length 1.20 m × Height 0.375 m = 1.800 Sqm - Shelves Sides: 4 Nos. × Length 0.60 m × Height 0.70 m = 1.680 Sqm - Bottom: 4 Nos. × Length 0.45 m × Width 0.60 m = 1.080 Sqm - Sides: 8 Nos. × Length 0.60 m × Height 0.375 m = 1.800 Sqm - Flexible Ply Design: 2 Nos. × Length 1.82 m × Height 0.225 m = 0.819 Sqm - Flexible Ply Band: 2 Nos. × Length 1.82 m × Width 0.15 m = 0.546 Sqm(b) For Docra and Saree Reck: - Horizontal: 2 Nos. × Length 2.55 m × Width 0.67 m = 3.417 Sqm - Horizontal Shelves: 12 Nos. × Length 2.55 m × Width 0.60 m = 18.360 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.40 m = 6.432 Sqm - Vertical Intermediate: 16 Nos. × Length 0.60 m × Height 2.40 m = 23.040 Sqm - Back Panel: 2 Nos. × Length 2.55 m × Height 2.40 m = 12.240 Sqm - Shelves: 12 Nos. × Length 1.20 m × Height 0.30 m = 4.320 Sqm - Shelves: 24 Nos. × Length 0.45 m × Height 0.30 m = 3.240 Sqm - Bottom Panels: 24 Nos. × Length 0.60 m × Width 0.67 m = 9.650 Sqm - Flexible Ply Design: 2 Nos. × Length 2.55 m × Height 0.225 m = 1.148 Sqm - Flexible Ply Band: 2 Nos. × Length 2.55 m × Width 0.15 m = 0.765 Sqm(c) Cloth Roll Reck: - Top: 1 No. × Length 1.82 m × Width 0.76 m = 1.383 Sqm - Shelves: 5 Nos. × Length 1.82 m × Width 0.60 m = 5.460 Sqm - Vertical: 5 Nos. × Length 0.67 m × Height 0.75 m = 2.510 Sqm - Bottom: 10 Nos. × Length 0.45 m × Width 0.60 m = 2.700 Sqm - Flexible Ply Band: 1 No. × Length 1.82 m × Width 0.15 m = 0.273 Sqm(d) For Kurta Hanging Stand: - Horizontal (Top): 2 Nos. × Length 1.82 m × Width 0.60 m = 2.184 Sqm - Shelves: 4 Nos. × Length 1.82 m × Width 0.60 m = 4.368 Sqm - Shelves: 4 Nos. × Length 1.82 m × Width 0.60 m = 4.368 Sqm - Vertical: 4 Nos. × Length 0.60 m × Height 1.82 m = 4.368 Sqm - Vertical: 4 Nos. × Length 0.45 m × Height 1.82 m = 3.276 Sqm(e) For Cash Counter Table: - Front Side: 1 No. × Length 1.82 m × Height 1.20 m = 2.184 Sqm - Both Outer Sides: 2 Nos. × Length 0.60 m × Height 1.20 m = 1.440 Sqm - Inside Partitions: 2 Nos. × Length 0.67 m × Height 1.20 m = 1.608 Sqm - Inside Trays: 2 Nos. × Length 0.45 m × Width 0.60 m = 0.540 Sqm - Top & Bottom Portion: 2 Nos. × Length 1.82 m × Width 0.60 m = 2.184 Sqm - Reck Shutters: 2 Nos. × Length 0.60 m × Height 1.20 m = 1.440 Sqm(f) Wall Panelling: - Trail Room Wall 1: 2 Nos. × Length 2.10 m × Height 3.00 m = 12.600 Sqm - Trail Room Wall 2: 2 Nos. × Length 1.82 m × Height 3.00 m = 10.920 Sqm - Hall Main Wall: 2 Nos. × Length 7.85 m × Height 3.00 m = 47.100 Sqm - Hall Side Wall: 1 No. × Length 7.05 m × Height 3.00 m = 21.150 SqmTotal Decorative Plywood Quantity = 256.311 Sqm |
| 7 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surfacs layer and reverse side adhesive bonding quality conforming to IS : 2045 Type S,including cost of adhesive of approved quality(a) For Kurta Reck (dual surfaces): - Horizontal (Top): 4 Nos. × Length 1.82 m × Width 0.76 m = 5.533 Sqm - Horizontal Shelves: 16 Nos. × Length 1.82 m × Width 0.60 m = 17.472 Sqm - Horizontal Shelf: 8 Nos. × Length 1.82 m × Width 0.60 m = 8.736 Sqm - Vertical Ends: 8 Nos. × Length 0.67 m × Height 2.40 m = 12.864 Sqm - Vertical Divider: 4 Nos. × Length 0.60 m × Height 2.40 m = 5.760 Sqm - Back Face: 4 Nos. × Length 1.82 m × Height 2.40 m = 17.472 Sqm - Shelf Sides: 8 Nos. × Length 1.20 m × Height 0.375 m = 3.600 Sqm - Shelf Sides: 8 Nos. × Length 0.60 m × Height 0.70 m = 3.360 Sqm - Bottom Panels: 8 Nos. × Length 0.45 m × Width 0.60 m = 2.160 Sqm - Sides: 16 Nos. × Length 0.60 m × Height 0.375 m = 3.600 Sqm - Flexible Ply Design: 4 Nos. × Length 1.82 m × Height 0.225 m = 1.638 Sqm - Flexible Ply Band: 4 Nos. × Length 1.82 m × Width 0.15 m = 1.092 Sqm(b) For Docra and Saree Reck (dual surfaces): - Horizontal: 4 Nos. × Length 2.55 m × Width 0.67 m = 6.834 Sqm - Horizontal Shelves: 24 Nos. × Length 2.55 m × Width 0.60 m = 36.720 Sqm - Vertical Ends: 8 Nos. × Length 0.67 m × Height 2.40 m = 12.864 Sqm - Vertical Intermediate: 32 Nos. × Length 0.60 m × Height 2.40 m = 46.080 Sqm - Back Face: 4 Nos. × Length 2.55 m × Height 2.40 m = 24.480 Sqm - Shelves: 24 Nos. × Length 1.20 m × Height 0.30 m = 8.640 Sqm - Shelves: 48 Nos. × Length 0.45 m × Height 0.30 m = 6.480 Sqm - Bottom Base: 48 Nos. × Length 0.60 m × Width 0.67 m = 19.296 Sqm - Flexible Ply Band: 4 Nos. × Length 2.55 m × Width 0.15 m = 1.530 Sqm(c) Cloth Roll Reck (dual surfaces): - Top: 2 Nos. × Length 1.82 m × Width 0.76 m = 2.766 Sqm - Shelves: 10 Nos. × Length 1.82 m × Width 0.60 m = 10.920 Sqm - Vertical: 10 Nos. × Length 0.67 m × Height 0.75 m = 5.025 Sqm - Bottom: 20 Nos. × Length 0.45 m × Width 0.60 m = 5.400 Sqm - Flexible Ply Band: 2 Nos. × Length 1.82 m × Width 0.15 m = 0.546 Sqm(d) For Kurta Hanging Stand (dual surfaces): - Horizontal (Top): 4 Nos. × Length 1.82 m × Width 0.60 m = 4.368 Sqm - Shelves: 8 Nos. × Length 1.82 m × Width 0.60 m = 8.736 Sqm - Shelves: 8 Nos. × Length 1.82 m × Width 0.60 m = 8.736 Sqm - Vertical: 8 Nos. × Length 0.60 m × Height 1.82 m = 8.736 Sqm - Vertical: 8 Nos. × Length 0.45 m × Height 1.82 m = 6.552 Sqm(e) For Cash Counter Table (dual surfaces): - Front Face: 2 Nos. × Length 1.82 m × Height 1.20 m = 4.368 Sqm - Both Outer Sides: 4 Nos. × Length 0.60 m × Height 1.20 m = 2.880 Sqm - Insides: 4 Nos. × Length 0.67 m × Height 1.20 m = 3.216 Sqm - Trays: 4 Nos. × Length 0.45 m × Width 0.60 m = 1.080 Sqm - Top & Bottom Portion: 4 Nos. × Length 1.82 m × Width 0.60 m = 4.368 Sqm - Rack Shutters: 4 Nos. × Length 0.60 m × Height 1.20 m = 2.880 Sqm(f) Display Tables, Trail Room & Wall Panelling: - Table for Display Verticals: 2×2 Nos. × Length 1.65 m × Height 0.75 m = 4.950 Sqm - Table for Display Sides: 2×2 Nos. × Length 0.75 m × Height 0.75 m = 2.250 Sqm - Table Top & Bottom: 2×4 Nos. × Length 1.65 m × Width 0.75 m = 9.900 Sqm - Trail Room Enclosure: 1 No. × L 3.00 m × W 2.40 m × H 3.00 m = 21.600 Sqm - Wall Panelling Trail Room 1: 2 Nos. × Length 2.10 m × Height 3.00 m = 12.600 Sqm - Wall Panelling Trail Room 2: 2 Nos. × Length 1.82 m × Height 3.00 m = 10.920 Sqm - Hall Main Wall: 2 Nos. × Length 7.85 m × Height 3.00 m = 47.100 Sqm - Hall Side Wall: 1 No. × Length 7.05 m × Height 3.00 m = 21.150 Sqm - Brand Wall: 1 No. × Length 3.60 m × Height 3.00 m = 10.800 SqmTotal Decorative Laminate Quantity = 468.058 Sqm |
| 8 | Supplying,fitting and fixing good quality,well dressed and well seasoned teak wood for Reck of all types of Cloths frame including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I• Table for Display Frame - Vertical: 2×4 Nos. × 0.06 m × 0.06 m × 0.90 m = 0.026 Cum• Table for Display Frame - Horizontal: 2×2 Nos. × 1.65 m × 0.05 m × 0.05 m = 0.016 Cum• Table for Display Frame - Horizontal: 2×2 Nos. × 0.75 m × 0.05 m × 0.05 m = 0.0075 Cum• Top and Bottom Portion: 2×4 Nos. × 1.65 m × 0.75 m × 0.0375 m = 0.376 CumTotal Quantity = 0.426 Cum |
| 9 | Providing and fixing frameless (Sensor) Grey automatic Double leaf sliding glass door with all Complete job as per dierction of E/I (For Main Gate of Emporium) ( Size of Door is 7'-0''x8-0'') or as per requirement• 1 Set Complete = 1 No. |
| 10 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section,power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I. wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound,jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture's specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board• Main Area: 1 No. × Length 7.05 m × Width 7.85 m = 55.342 Sqm• For Trail Room: 1 No. × Length 2.10 m × Width 1.82 m = 3.822 Sqm• Sub-total Area = 59.165 Sqm• Assume 10% extra for Design and profiles = 5.910 SqmTotal Quantity = 65.075 Sqm |
| 11 | 38 mm thick wood block flooring first class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4 (1 cement :2 course sand :4 graded stone aggregate 10 mm nominal size) to be paod separately coated with a tjin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg/sqm,including fixing blocks in position after dipping in hot bitumen (blown type) up to hafl depth,planed.levelled smooth and finished complete.(Wooden Texture)• Flooring Area: 1 No. × Length 7.20 m × Width 8.15 m = 58.680 SqmTotal Quantity = 58.680 Sqm |
| 12 | Providing and fixing machine mouled aluminium coverering of approved pattern and design,made out machine sut aluminium sheet and machine hoted for receiving dash fastener,cover exoension joints on vertical surfaces/ ceiling floors,the fixing on lpate dash fasteners of 8 mm dia and 75 mm long bolts including providing aluminium washers 2 mm thick and 15 mm dia,at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandeable plastic sleeves in holes etc. complete as per dierction of E/I (At out side of Emporium) Anodised aluminium sheet 2.5 mm thick (anodised transperent or dyed to required shade according to IS:1868 Minimum anodic coating of grade AC 15)• Outside Fascia 1: 4 Nos. × Length 0.90 m × Height 2.40 m = 8.640 Sqm• Outside Fascia 2: 2 Nos. × Length 3.60 m × Height 0.60 m = 4.320 Sqm• Hall Wall 1: 2 Nos. × Length 7.85 m × Height 3.00 m = 47.100 Sqm• Hall Wall 2: 1 No. × Length 7.05 m × Height 3.00 m = 21.150 Sqm• Trial Room 1: 2 Nos. × Length 2.10 m × Height 3.00 m = 12.600 Sqm• Trial Room 2: 1 No. × Length 1.07 m × Height 3.00 m = 3.210 Sqm• Trial Room 3: 1 No. × Length 1.82 m × Height 3.00 m = 5.460 Sqm• Total Area = 102.480 Sqm (1102.68 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 882.140 Kg |
| 13 | Providing and fixing glazing in aluminium door,window,ventilator shutter and partitions etc. with EPDM/ rubber/neoprene gasket eyc. Complete as per the architectural drawing and the directions of E/I (Cost of aluminium snap beading shall be paid in basic item) With flot glass panes of 8 mm thickness ( weight less than 20 Kg/Sqm)• Display Spaces 1: 2 Nos. × Length 0.90 m × Height 2.40 m = 4.320 Sqm• Display Spaces 2: 2 Nos. × Length 2.40 m × Height 2.40 m = 11.520 Sqm• Show Case 1: 2 Nos. × Length 1.50 m × Height 2.40 m = 7.200 Sqm• Show Case 2: 2 Nos. × Length 0.91 m × Height 2.40 m = 4.368 SqmTotal Quantity = 27.408 Sqm |
| 14 | Poviding and fixing wall pices Jharkhand Map waterproof Vinlyl stricker paper poster size (24''x36''),high quality posters are printed from high resolusion image with self adhesive. and all other necessary required all complete Job.• 18 Nos. Posters Complete = 18 Nos. |
| 15 | Poviding and fixing Dokra and other materials with wooden frame in for different states with painting and all other necessary required all complete Job.• 22 Nos. Art Frames Complete = 22 Nos. |
| 16 | Providing and fixing chromium plates brass handle with necessary screws,nut and washers etc. complete 125mm• Total Quantity = 150 Nos. |
| 17 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete 125x63x4mm• Total Quantity = 6 Nos. |
| 18 | Providing and fixing oxidised M.S hasp and staple (afety type) conforming to IS: 363 with necessary screws etc. complete 90.mm• Total Quantity = 175 Nos. |
| 19 | Providing and fixing aluminium sliding door bolts,ISI marked anolised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade,with nuts and screws etc.complete 300x16 mm• Total Quantity = 340 Nos. |
| 20 | Proving and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.• Total Quantity = 110 Nos. |
| 21 | Poviding and fixing JBL Arena 6iC Ceiling Speaker Size 6'' dia. With all necessary screws ans bolds with all complete job. poster size (24''x36''),high quality posters are printed from high resolusion image with self adhesive. and all other necessary required all complete Job.• Total Quantity = 1 No. |
| 22 | Distemper with oil bound washable distemper of approved brand and manufacture to give even shade:- New work ( two or more coats) over and including water thinnable priming coat with cement primer• Under False Ceiling: 1 No. × Length 7.05 m × Width 7.84 m = 55.272 SqmTotal Quantity = 55.272 Sqm |
| 23 | Providing and fixing mirror of suprior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Oval shape 450x350mm (Outer Diamensions)• Oval shape 450x350 mm: 2 Nos. × Length 1.00 m × Height 2.10 m = 4.200 Sqm• In Trail Room: 1 No. × Length 1.00 m × Height 2.10 m = 2.100 SqmTotal Quantity = 6.300 Sqm |
| 24 | Providing and fixing waterproof strickers featuring traditional soharai ethnic art styled for ladies and gents garments (Such as heat transfer prints like Kurtis and Sarees) with self adhesive with all complete job. ( At out side of Emporium)• Display Panels: 2 Nos. × Length 0.90 m × Height 2.40 m = 4.320 SqmTotal Quantity = 4.320 Sqm |
| 25 | Providing and fixing 2nd class wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/nail on the edges of the Pre-laminated particle board as per direction of E/I• Lipping: 2 Nos. × Length 2.25 m = 1.200 Mtr• Beading in front of Reception Table: 2 Nos. × 65.00 m = 130.000 MtrTotal Quantity = 131.200 Mtr |
| 26 | Note:- OF MAKE (1)PVC insuleted copper conductor wire of make:-Havell's/Polycab/Anchor/Nitcab/Paraflex/V-GUARD (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG/Paraflex (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB/Anchor/ Great white (4)Switches/soket outlet for modular type:- Anchor(roma) / Havells(cabtree) / Legrand(Allazy)/L&T(enGem/ABB(TIVISHA) (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCBDB:Havell's/L&T/Legrand/Schneider/C&S/Anchor (6)XLPE/PVC aramoured cable:-Havell's/Polycab/KEI/Paraflex (7) LED FTTING FIXTURE -: Havells/Crompton/Philips/Panasonic/Jaquar/Doreka (Model/as per E/I ) (8) CEILING / WALL / EXHAUST FAN -: Havells /Polar / Usha/Crompton (Model/as per E/I) (9)OCTAGONAL POLE/High Mast-: Bajaj/Philips/Crompton/RR ISPAT/Valmont/Transrail (10) CENTRALISED AIR CONDITIONING-:VOLTAS/MITSHUBISHI/TOSHIBA/DAIKIN/HITACHI (11)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED (12)CCTV CAMERA /DVR-:Panasonic/Hik vision/C.P Plus/Godrej (13)Monitor Camera -: Dell/Samsung/LG/Asus (14)Silent type D.G Set-:Kohler/Jakson/Sterling/Eicher/Kirloskar/Mahindra Point Wiring in PVC conduit with piano type switch Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required.• Total Points = 56 Nos. |
| 27 | Power plug wiring in PVC coduit (2x4 Sq.mm) Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.• Total Outlets = 198 Nos. |
| 28 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amp,3 pin socket outlet• Total Quantity = 56 Nos. |
| 29 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amp one way switch• Total Quantity = 10 Nos. |
| 30 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 121mmx173mmx48mm deep (6''x8'')• Total Quantity = 6 Nos. |
| 31 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 72mmx146mmx48mm deep (4''x7'')• Total Quantity = 4 Nos. |
| 32 | Supplying and fixing Batten holder: Supplying and fixing Batten/ angle holder including connection etc. as required.:• Total Quantity = 6 Nos. |
| 33 | Providing and fixing LED Rope light in any columns Brand (Philips) with all complete job.• Total Length = 35.500 Rmt |
| 34 | Supply , installation, testing & Commissioning of ceiling suspended DX type 4-WAY CASSETTE AC units with air cooled condenser complete with 5 Star Inverter type scroll/rotary compressor ,condenser ,wiring & accessories . Indoor units shall be ceiling suspended type complete with evaporator ,fan, filter ,drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge , cordless remote controls. The unit shall be suitable for working at 240 ± 10% ,50 Hz,1 phase AC supply .The unit shall be designed to take care of minimum vertical head 5mt & horizontal length of 30 mt & necessary oil separator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per approved make, ) with necessary vibration isolation arrangement as per site condition etc.The Outdoor unit Compressor must be provided with 5 Year Warranty Period.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition. Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts.2.0TRREFRIGERANT PIPING Supply, fixing, testing and commissioning of interconnecting soft/hard drawn copper refrigerant pipe work of following outer diameter duly insulated with fire rated class'O' closed cell elastomeric nitrile rubber type tubular insulation (19mm/13mm thick) between indoor & outdoor units . All piping should be laid on Galvanized/Powder Coated tray supported by Galvanized M S Hangers & Clamps and all external piping shall run in covered cable trays. The rate includes all the items required to complete the piping work and nothing extra should be payable.Vaccumiazation & Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition.6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr ,9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr.Providing and fixing of cPVC drain water piping complete with fittings, flexible connection to IDU, necessary support as per specification and insulated with 6 mm thick fire rated class'O' closed cell elastomeric nitrile rubber insulation-6mtr COMMUNICATION CABLE BETWEEN INDOOR AND OUTDOOR,OUTDOOR UNIT AC STAND ,AC INSTALLATION CHARGES,VOLTAGE STABLIZER 5kvamake- v-guard,voltas ,microtekmake AC- Daikin ,LG,Hitachi,Carrier• Total Quantity = 3 Nos. |
| 35 | Supplying and fixing 2 pin 5 amp Ceiling rose on the existing junction box/wooden block including connection etc. as required.• Total Quantity = 25 Nos. |
| 36 | Supplying and fixing Modular type electronic fan regulator:- Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.• Total Quantity = 48 Nos. |
| 37 | Supply Installation,testing and commissioning of following size ceiling or side fan 3 blades confirming to IS: 374 :2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm FR PVC insulated copper wire suitable for 230 V 50Hz,single phase supply etc complete required. 1200 mm (48'') Ceiling or Side fan• Total Quantity = 8 Nos. |
| 38 | Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton• Total Quantity = 2 Nos. |
| 39 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amp,3 pin socket outlet• Total Quantity = 15 Nos. |
| 40 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amp one way switch• Total Quantity = 12 Nos. |
| 41 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x1.5 sq.mm+1x1.5 sq.mm earth wire• Total Length = 195.000 Mtr. |
| 42 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x2.5 sq.mm+1x2.5 sq.mm earth wire• Total Length = 145.000 Mtr. |
| 43 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 4x10.0 sq mm+2x6.0 sq mm earth wire• Total Length = 65.000 Mtr. |
| 44 | 2.18S/F 20 amps SPN MCB industrial socket outlet:-Supplying and fixing 20 amps, 240 volts,SPN industrial type, socket outlet, with 2 pole and and earth, metal enclosed plug top along with 20 amps 'c' series, SP MCCB, insheet steel enclosure,in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.• Total Quantity = 3 Nos. |
| 45 | S/F T.P.MCB DB:-Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) 4 way (4+12),Double door, Horizontal type• Total Quantity = 1 No. |
| 46 | Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)• Total Quantity = 2 Sets |
| 47 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 1'X1' led Panel light• Total Quantity = 4 Nos. |
| 48 | Supplying,installation,testing and commissioning of Wire less CCTV Cameras,including wiring and all other necessary accessories as required all complete job.• Total Quantity = 8 Nos. |
| 49 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15/16 led Round Down light• Total Quantity = 56 Nos. |
| 50 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15 W COB based LED light with multiple beam angle (36 degree)• Total Quantity = 16 Nos. |
| 51 | S.I.T.C of following rating recess/surface mounted LED bulb suitable for 230 V 50 Hz single phase supply etc. complete as required. 15/16 W LED Bulb• Total Quantity = 6 Nos. |
| 52 | Poviding and fixing 3D brass letters for Logo signage.The height at top- 12'',at middle-9'' and at bottom-4'' .The minimum thickness of the letters is at top- 2'' at middle-1.5'' and at bottom-12mm finished and lighting at front Side of Emporium and all other necessary required all complete Job. (At Outside of the Emporium)• Signage Area: 1 No. × Length 1.50 m × Height 0.45 m = 0.675 Sqm |
| 53 | Particulars with Specification |
| 54 | Dismantling plain cement or lime concrete work including stacking servieable materials in countable stacks within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Section 1: 1 No. × L 2.40 m × W 5.47 m × D 0.10 m = 1.313 Cum• Section 2: 1 No. × L 2.92 m × W 2.00 m × D 0.10 m = 0.584 Cum• Section 3: 1 No. × L 2.92 m × W 3.60 m × D 0.10 m = 1.051 CumTotal Quantity = 2.948 Cum |
| 55 | Dismantling dressed stone work ahhlar face stone work,marble work or orecast concrete work manually and disposal of unserviceable material within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Wooden Flooring Area 1: 1 No. × L 2.40 m × W 5.47 m = 13.128 Sqm• Wooden Flooring Area 2: 1 No. × L 2.00 m × W 2.92 m = 5.840 Sqm• Wooden Flooring Area 3: 1 No. × L 2.92 m × W 3.60 m = 10.512 SqmTotal Quantity = 29.480 Sqm |
| 56 | Dismantling aluminum/Gypsum partition.doors.windows,fixed glazing and false ceiling including disposal of unservieable materials and stacking of serviceable materials with in 50 M leads all lead as per directed by E/I• False Ceiling: 1 No. × L 2.40 m × W 5.47 m = 13.128 Sqm• False Ceiling Area 2: 1 No. × L 2.92 m × W 2.00 m = 5.840 Sqm• Store Room Ceiling: 1 No. × L 2.92 m × W 3.60 m = 10.512 Sqm• Artificial Grass Wall 1: 1 No. × L 5.47 m × H 3.00 m = 16.410 Sqm• Artificial Grass Wall 2: 1 No. × L 2.40 m × H 3.00 m = 7.200 Sqm• Artificial Grass Wall 3: 1 No. × L 2.92 m × H 3.00 m = 8.760 Sqm• Artificial Grass Wall 4: 1 No. × L 2.00 m × H 3.00 m = 6.000 Sqm• Glazed Racks: 16 Nos. × L 3.60 m × W 0.60 m = 34.560 Sqm• Glazed Racks Side: 5 Nos. × L 0.45 m × W 0.60 m = 1.350 SqmTotal Quantity = 103.760 Sqm |
| 57 | Providing and laying in position ( P.C.C) M-200 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size)• Bay 1: 1 No. × L 2.40 m × W 5.47 m × D 0.10 m = 1.313 Cum• Bay 2: 1 No. × L 2.92 m × W 2.00 m × D 0.10 m = 0.584 Cum• Bay 3: 1 No. × L 2.92 m × W 3.60 m × D 0.10 m = 1.051 CumTotal Quantity = 2.948 Cum |
| 58 | Diluting injecting chemical emulsion for POAT-CONSTRUCTIONAL anti-termite treatment (exclusive the cost of chemical emulsion) Treatment at point of contact of wood work by chemical emulsion Chlopyriphos/Lindane (in or Kirosene based solution) @ 0.50 litre per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.• Wall perimeter contacts: 1 × 5.47 m + 1 × 2.40 m + 3 × 3.60 m + 3 × 2.92 m + 1 × 2.00 m + 1 × 5.30 mTotal Quantity = 21.690 Rmt |
| 59 | Providing and fixing panelled or panelled and glazing in panelled or panelled and glazed shuttera for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) comforming to IS: 1328(a) For Kurta Reck: - Horizontal (Top): 1 No. × L 2.92 m × W 0.76 m = 2.219 Sqm - Horizontal Shelves: 4 Nos. × L 2.92 m × W 0.60 m = 7.008 Sqm - Vertical Ends: 2 Nos. × L 0.67 m × H 2.75 m = 3.685 Sqm - Vertical Divider: 1 No. × L 0.60 m × H 2.17 m = 1.302 Sqm - Back Panel: 1 No. × L 2.92 m × H 2.75 m = 8.030 Sqm - Shelf Sides: 16 Nos. × L 0.60 m × H 0.375 m = 3.600 Sqm - Bottom Trays: 16 Nos. × L 0.45 m × W 0.60 m = 4.320 Sqm - Flexible Ply for Design: 2 Nos. × L 2.92 m × H 0.225 m = 1.314 Sqm - Flexible Ply Band: 2 Nos. × L 2.92 m × W 0.15 m = 0.876 Sqm(b) For Docra Reck: - Horizontal (Top): 1 No. × L 0.80 m × W 0.76 m = 0.608 Sqm - Horizontal Shelves: 5 Nos. × L 0.80 m × W 0.60 m = 2.400 Sqm - Vertical Ends: 2 Nos. × L 0.67 m × H 2.17 m = 2.908 Sqm - Vertical Sub-dividers: 10 Nos. × L 0.60 m × H 2.17 m = 13.020 Sqm - Back Panel: 1 No. × L 0.80 m × H 2.92 m = 2.336 Sqm - Shelves Sides: 2 Nos. × L 0.60 m × H 0.375 m = 0.450 Sqm - Shelf Tiers: 2 Nos. × L 0.60 m × W 0.67 m = 0.804 Sqm - Bottom Panel: 2 Nos. × L 0.60 m × W 0.67 m = 0.804 Sqm - Flexible Ply Design: 1 No. × L 0.80 m × H 0.23 m = 0.184 Sqm - Flexible Ply Band: 1 No. × L 0.80 m × W 0.15 m = 0.120 Sqm(c) For Saree Reck: - Horizontal (Top): 1 No. × L 3.60 m × W 0.76 m = 2.736 Sqm - Horizontal Shelves: 3 Nos. × L 3.60 m × W 0.60 m = 6.480 Sqm - Vertical Ends: 2 Nos. × L 0.67 m × H 2.92 m = 3.913 Sqm - Bottom Base: 4 Nos. × L 3.60 m × W 0.60 m = 8.640 Sqm - Flexible Ply Band: 1 No. × L 3.60 m × W 0.15 m = 0.540 Sqm - Vertical Dividers: 2 Nos. × L 0.67 m × H 2.92 m = 3.913 Sqm - Shelves Vertical Partitions: 8 Nos. × L 0.67 m × H 0.45 m = 2.412 Sqm(d) For Cash Counter Table: - Front Facing: 1 No. × L 1.82 m × H 1.20 m = 2.184 Sqm - Both Outer Sides: 2 Nos. × L 0.60 m × H 1.20 m = 1.440 Sqm - Inside Partitions: 2 Nos. × L 0.67 m × H 1.20 m = 1.608 Sqm - Inner Horizontal Trays: 2 Nos. × L 0.45 m × W 0.60 m = 0.540 Sqm - Counter Top & Bottom: 2 Nos. × L 1.82 m × W 0.60 m = 2.184 Sqm(e) Reck Shutters & Wall Panelling: - Shutters (Saree Reck): 1 No. × L 3.60 m × H 0.76 m = 2.736 Sqm - Shutters (Kurta Reck): 1 No. × L 2.92 m × H 0.76 m = 2.219 Sqm - Shutters (Docra Reck): 1 No. × L 0.80 m × H 0.76 m = 0.608 Sqm - Wall Panelling Wall 1: 1 No. × L 5.47 m × H 3.00 m = 16.410 Sqm - Wall Panelling Wall 2: 1 No. × L 2.40 m × H 3.00 m = 7.200 Sqm - Wall Panelling Wall 3: 3 Nos. × L 3.60 m × H 3.00 m = 32.400 Sqm - Wall Panelling Wall 4: 3 Nos. × L 2.92 m × H 3.00 m = 26.280 SqmTotal Decorative Plywood Quantity = 180.420 Sqm |
| 60 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surfacs layer and reverse side adhesive bonding quality conforming to IS : 2045 Type S,including cost of adhesive of approved quality(a) For Kurta Reck (dual faces): - Top Horizontal: 2 Nos. × L 2.92 m × W 0.76 m = 4.438 Sqm - Horizontal Shelves: 8 Nos. × L 2.92 m × W 0.60 m = 14.016 Sqm - Vertical Ends: 4 Nos. × L 0.67 m × H 2.75 m = 7.370 Sqm - Vertical Divider: 2 Nos. × L 0.60 m × H 2.17 m = 2.604 Sqm - Back Face: 2 Nos. × L 2.92 m × H 2.75 m = 16.060 Sqm - Shelf Sides: 32 Nos. × L 0.60 m × H 0.375 m = 7.200 Sqm - Bottom Trays: 32 Nos. × L 0.45 m × W 0.60 m = 8.640 Sqm - Flexible Laminate: 4 Nos. × L 2.92 m × H 0.225 m = 1.314 Sqm - Flexible Laminate Band: 4 Nos. × L 2.92 m × W 0.15 m = 1.752 Sqm(b) For Docra Reck (dual faces): - Top: 2 Nos. × L 0.80 m × W 0.76 m = 1.216 Sqm - Shelves: 10 Nos. × L 0.80 m × W 0.60 m = 4.800 Sqm - Vertical Ends: 4 Nos. × L 0.67 m × H 2.17 m = 5.816 Sqm - Vertical Dividers: 20 Nos. × L 0.60 m × H 2.17 m = 26.040 Sqm - Back Face: 2 Nos. × L 0.80 m × H 2.92 m = 4.672 Sqm - Shelves Sides: 4 Nos. × L 0.60 m × H 0.375 m = 0.900 Sqm - Shelf Tiers: 4 Nos. × L 0.60 m × W 0.67 m = 1.608 Sqm - Bottom: 4 Nos. × L 0.60 m × W 0.67 m = 1.608 Sqm - Flexible Laminate Design: 2 Nos. × L 0.80 m × H 0.23 m = 0.184 Sqm - Flexible Laminate Band: 2 Nos. × L 0.80 m × W 0.15 m = 0.240 Sqm(c) For Saree Reck (dual faces): - Top: 2 Nos. × L 3.60 m × W 0.76 m = 5.472 Sqm - Shelves: 6 Nos. × L 3.60 m × W 0.60 m = 12.960 Sqm - Vertical Ends: 4 Nos. × L 0.67 m × H 2.92 m = 3.910 Sqm - Bottom Base: 8 Nos. × L 3.60 m × W 0.60 m = 17.280 Sqm - Flexible Band: 2 Nos. × L 3.60 m × W 0.15 m = 1.080 Sqm - Vertical Partitions: 4 Nos. × L 0.67 m × H 2.92 m = 7.826 Sqm - Shelves Vertical: 16 Nos. × L 0.67 m × H 0.45 m = 4.824 Sqm(d) For Cash Counter Table (dual faces): - Front Face: 2 Nos. × L 1.82 m × H 1.20 m = 4.368 Sqm - Both Outer Sides: 4 Nos. × L 0.60 m × H 1.20 m = 2.880 Sqm - Insides: 4 Nos. × L 0.67 m × H 1.20 m = 3.216 Sqm - Trays: 4 Nos. × L 0.45 m × W 0.60 m = 1.080 Sqm - Top & Bottom Portion: 4 Nos. × L 1.82 m × W 0.60 m = 4.368 Sqm(e) Shutters, Tables & Walls: - Shutters (Saree Reck): 2 Nos. × L 3.60 m × H 0.76 m = 5.472 Sqm - Shutters (Kurta Reck): 2 Nos. × L 2.92 m × H 0.76 m = 2.219 Sqm - Shutters (Docra Reck): 2 Nos. × L 0.80 m × H 0.76 m = 0.608 Sqm - Wall Panelling 1: 1 No. × L 5.47 m × H 3.00 m = 16.410 Sqm - Wall Panelling 2: 1 No. × L 2.40 m × H 3.00 m = 7.200 Sqm - Wall Panelling 3: 3 Nos. × L 3.60 m × H 3.00 m = 32.400 Sqm - Wall Panelling 4: 3 Nos. × L 2.92 m × H 3.00 m = 26.280 Sqm - Display Table Verticals: 4 Nos. × L 1.65 m × H 0.75 m = 4.950 Sqm - Display Table Sides: 4 Nos. × L 0.75 m × H 0.75 m = 2.250 Sqm - Display Table Top/Bottom: 4 Nos. × L 1.65 m × W 0.75 m = 9.900 Sqm - At Brand Wall: 1 No. × L 2.40 m × H 3.00 m = 7.200 SqmTotal Decorative Laminate Quantity = 294.623 Sqm |
| 61 | Providing and fixing frameless (Sensor) Grey automatic Double leaf sliding glass door with all Complete job as per dierction of E/I (For Main Gate of Emporium) ( Size of Door is 76'-0''x8-0'') or as per requirement• 1 Set Complete = 1 No. |
| 62 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section,power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I. wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound,jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture's specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I but excluding the cost of painting with:• 12.5 mm thick tapered edge gypsum moisture resistant board• Front Area: 1 No. × L 5.32 m × W 2.00 m = 10.640 Sqm• Side Area: 1 No. × L 2.40 m × W 3.60 m = 8.640 Sqm• Rear Area: 1 No. × L 2.92 m × W 3.60 m = 10.512 Sqm• Sub-total Area = 29.792 Sqm• Assume 10% extra for Design and other = 2.970 SqmTotal Quantity = 32.762 Sqm |
| 63 | 38 mm thick wood block flooring first class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4 (1 cement :2 course sand :4 graded stone aggregate 10 mm nominal size) to be paod separately coated with a tjin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg/sqm,including fixing blocks in position after dipping in hot bitumen (blown type) up to hafl depth,planed.levelled smooth and finished complete.(Wooden Texture)• Room Area 1: 1 No. × L 5.62 m × W 2.14 m = 12.027 Sqm• Room Area 2: 1 No. × L 2.75 m × W 3.75 m = 10.313 Sqm• Room Area 3: 1 No. × L 3.90 m × W 3.22 m = 12.558 SqmTotal Quantity = 34.897 Sqm |
| 64 | Providing and fixing machine mouled aluminium coverering of approved pattern and design,made out machine sut aluminium sheet and machine hoted for receiving dash fastener,cover exoension joints on vertical surfaces/ ceiling floors,the fixing on lpate dash fasteners of 8 mm dia and 75 mm long bolts including providing aluminium washers 2 mm thick and 15 mm dia,at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandeable plastic sleeves in holes etc. complete as per dierction of E/I (At out side of Emporium) Anodised aluminium sheet 2.5 mm thick (anodised transperent or dyed to required shade according to IS:1868 Minimum anodic coating of grade AC 15)• External Side: 2 Nos. × L 1.50 m × H 2.40 m = 7.200 Sqm• External Header: 1 No. × L 5.23 m × H 0.60 m = 3.138 Sqm• Inside At Wall 1: 1 No. × L 5.23 m × H 3.00 m = 15.690 Sqm• Inside At Wall 2: 1 No. × L 5.47 m × H 3.00 m = 16.410 Sqm• Inside At Wall 3: 1 No. × L 2.40 m × H 3.00 m = 7.200 Sqm• Inside At Wall 4: 3 Nos. × L 3.60 m × H 3.00 m = 10.800 Sqm• Inside At Wall 5: 3 Nos. × L 2.92 m × H 3.00 m = 8.760 Sqm• Inside At Wall 6: 1 No. × L 2.00 m × H 3.00 m = 6.000 Sqm• Deduct Opening: -1 No. × L 1.82 m × H 2.40 m = -4.368 Sqm• Total Area = 70.830 Sqm (762.13 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 609.700 Kg |
| 65 | Providing and fixing glazing in aluminium door,window,ventilator shutter and partitions etc. with EPDM/ rubber/neoprene gasket eyc. Complete as per the architectural drawing and the directions of E/I (Cost of aluminium snap beading shall be paid in basic item) With flot glass panes of 8 mm thicness ( weight less than 20 Kg/Sqm)• Display space 1: 2 Nos. × L 1.50 m × H 2.40 m = 7.200 Sqm• Display space 2: 2 Nos. × L 0.60 m × H 2.40 m = 2.880 SqmTotal Quantity = 10.080 Sqm |
| 66 | Poviding and fixing wall pices Jharkhand Map waterproof Vinlyl stricker paper poster size (24''x36''),high quality posters are printed from high resolusion image with self adhesive. and all other necessary required all complete Job.• 18 Nos. Posters Complete = 18 Nos. |
| 67 | Poviding and fixing Dokra and other materials with wooden frame in for different states with painting and all other necessary required all complete Job.• 26 Nos. Complete = 26 Nos. |
| 68 | Providing and fixing chromium plates brass handle with necessary screws,nut and washers etc. complete 125mm• Total Quantity = 110 Nos. |
| 69 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete 125x63x4mm• Total Quantity = 6 Nos. |
| 70 | Providing and fixing oxidised M.S hasp and staple (afety type) conforming to IS: 363 with necessary screws etc. complete 90.mm• Total Quantity = 150 Nos. |
| 71 | Providing and fixing aluminium sliding door bolts,ISI marked anolised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade,with nuts and screws etc.complete 300x16 mm• Total Quantity = 175 Nos. |
| 72 | Proving and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete. • Total Quantity = 110 Nos. |
| 73 | Distemper with oil bound washable distemper of approved brand and manufacture to give even shade:- New work ( two or more coats) over and including water thinnable priming coat with cement primer• Area 1: 1 No. × L 5.32 m × W 2.00 m = 10.640 Sqm• Area 2: 1 No. × L 2.40 m × W 3.60 m = 8.640 Sqm• Area 3: 1 No. × L 2.92 m × W 3.60 m = 10.512 SqmTotal Quantity = 29.792 Sqm |
| 74 | Providing and fixing mirror of suprior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Oval shape 450x350mm (Outer Diamensions)• Oval shape 450x350 mm: 2 Nos. × L 1.00 m × H 2.10 m = 4.200 Sqm• In Trail Room: 1 No. × L 1.00 m × H 2.10 m = 2.100 SqmTotal Quantity = 6.300 Sqm |
| 75 | Providing and fixing waterproof strickers featuring traditional soharai ethnic art styled for ladies and gents garments (Such as heat transfer prints like Kurtis and Sarees) with self adhesive with all complete job. ( At out side of Emporium)• Exterior Panels: 2 Nos. × Length 1.50 m × Height 2.40 m = 7.200 SqmTotal Quantity = 7.200 Sqm |
| 76 | Providing and fixing 2nd class wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/nail on the edges of the Pre-laminated particle board as per direction of E/I• Lipping: 2 Nos. × Length 2.25 m = 1.200 Mtr• Beading in front of Reception Table: 2 Nos. × 65.00 m = 130.000 MtrTotal Quantity = 131.200 Mtr |
| 77 | Point Wiring in PVC conduit with piano type switch Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required. Group-B• Total Points = 35 Nos. |
| 78 | Power plug wiring in PVC coduit (2x4 Sq.mm) Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required. |
| 79 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amp,3 pin socket outlet• Total Quantity = 35 Nos. |
| 80 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amp one way switch• Total Quantity = 8 Nos. |
| 81 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 121mmx173mmx48mm deep (6''x8'')• Total Quantity = 7 Nos. |
| 82 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 72mmx146mmx48mm deep (4''x7'')• Total Quantity = 3 Nos. |
| 83 | Supplying and fixing Batten holder: Supplying and fixing Batten/ angle holder including connection etc. as required.:• Total Quantity = 35 Nos. |
| 84 | Providing and fixing LED Rope light in any columns Brand (Philips) with all complete job.• Total Quantity = 45.25 Rmt |
| 85 | Supplying and fixing 2 pin 5 amp Ceiling rose on the existing junction box/wooden block including connection etc. as required.• Total Quantity = 55 Nos. |
| 86 | Supplying and fixing Piano type switch/socket:-- Supplying and fixing following Piano type switch/socket on existing swiotch box.cover including connection etc. as required. 5/6 amp,one way switch• Total Quantity = 56 Nos. |
| 87 | Supplying and fixing Piano type switch/socket:-- Supplying and fixing following Piano type switch/socket on existing swiotch box.cover including connection etc. as required. 15/16 amp,one way switch• Total Quantity = 32 Nos. |
| 88 | Supplying and fixing Modular type electronic fan regulator:- Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.• Total Quantity = 6 Nos. |
| 89 | Supply Installation,testing and commissioning of following size ceiling or side fan 3 blades confirming to IS: 374 :2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm FR PVC insulated copper wire suitable for 230 V 50Hz,single phase supply etc complete required. 1200 mm (48'') Ceiling or Side fan• Total Quantity = 4 Nos. |
| 90 | Supply , installation, testing & Commissioning of ceiling suspended DX type 4-WAY CASSETTE AC units with air cooled condenser complete with 5 Star Inverter type scroll/rotary compressor ,condenser ,wiring & accessories . Indoor units shall be ceiling suspended type complete with evaporator ,fan, filter ,drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge , cordless remote controls. The unit shall be suitable for working at 240 ± 10% ,50 Hz,1 phase AC supply .The unit shall be designed to take care of minimum vertical head 5mt & horizontal length of 30 mt & necessary oil separator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per approved make, ) with necessary vibration isolation arrangement as per site condition etc.The Outdoor unit Compressor must be provided with 5 Year Warranty Period.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition. Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts.2.0TRREFRIGERANT PIPING Supply, fixing, testing and commissioning of interconnecting soft/hard drawn copper refrigerant pipe work of following outer diameter duly insulated with fire rated class'O' closed cell elastomeric nitrile rubber type tubular insulation (19mm/13mm thick) between indoor & outdoor units . All piping should be laid on Galvanized/Powder Coated tray supported by Galvanized M S Hangers & Clamps and all external piping shall run in covered cable trays. The rate includes all the items required to complete the piping work and nothing extra should be payable.Vaccumiazation & Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition.6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr ,9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr.Providing and fixing of cPVC drain water piping complete with fittings, flexible connection to IDU, necessary support as per specification and insulated with 6 mm thick fire rated class'O' closed cell elastomeric nitrile rubber insulation-6mtr COMMUNICATION CABLE BETWEEN INDOOR AND OUTDOOR,OUTDOOR UNIT AC STAND ,AC INSTALLATION CHARGES,VOLTAGE STABLIZER 5kvamake- v-guard,voltas ,microtekmake AC- Daikin ,LG,Hitachi,Carrier• Total Quantity = 3 Nos. |
| 91 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x1.5 sq.mm+1x1.5 sq.mm earth wire• Total Length = 120.00 Mtr |
| 92 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x2.5 sq.mm+1x2.5 sq.mm earth wire |
| 93 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 4x10.0 sq mm+2x6.0 sq mm earth wire |
| 94 | 2.18S/F 20 amps SPN MCB industrial socket outlet:-Supplying and fixing 20 amps, 240 volts,SPN industrial type, socket outlet, with 2 pole and and earth, metal enclosed plug top along with 20 amps 'c' series, SP MCCB, insheet steel enclosure,in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.S/F 20 amps SPN MCB industrial socket outlet:-Supplying and fixing 20 amps, 240 volts,SPN industrial type, socket outlet, with 2 pole and and earth, metal enclosed plug top along with 20 amps 'c' series, SP MCCB, insheet steel enclosure,in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
| 95 | S/F T.P.MCB DB:-Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) 4 way (4+12),Double door, Horizontal typeSupplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) 4 way (4+12),Double door, Horizontal type |
| 96 | Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke) |
| 97 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 1'X1' led Panel light• Total Quantity = 16 Nos. |
| 98 | Supplying,installation,testing and commissioning of Wire less CCTV Cameras,including wiring and all other necessary accessories as required all complete job.• Total Quantity = 6 Nos. |
| 99 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15/16 led Round Down light• Total Quantity = 80 Nos. |
| 100 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15 W COB based LED light with multiple beam angle (36 degree)• Total Quantity = 26 Nos. |
| 101 | S.I.T.C of following rating recess/surface mounted LED bulb suitable for 230 V 50 Hz single phase supply etc. complete as required.(15/16 W Led bulb)• Total Quantity = 15 Nos. |
| 102 | Poviding and fixing 3D brass letters for Logo signage.The height at top- 12'',at middle-9'' and at bottom-4'' .The minimum thickness of the letters is at top- 2'' at middle-1.5'' and at bottom-12mm finished and lighting at front Side of Emporium and all other necessary required all complete Job. (At Outside of the Emporium)• Signage Area: 1 No. × Length 1.50 m × Height 0.45 m = 0.675 SqmTotal Quantity = 0.675 Sqm |
| 103 | Particulars with Specification |
| 104 | Dismantling plain cement or lime concrete work including stacking servieable materials in countable stacks within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Floor Area 1: 1 No. × Length 3.90 m × Width 14.10 m × Depth 0.10 m = 5.499 Cum• Trail Room Area: 2 Nos. × Length 2.10 m × Width 1.82 m × Depth 0.10 m = 0.764 CumTotal Quantity = 6.263 Cum |
| 105 | Dismantling dressed stone work ahhlar face stone work,marble work or orecast concrete work manually and disposal of unserviceable material within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Main Hall Floor: 1 No. × Length 14.10 m × Width 3.90 m = 54.990 Sqm• Trail Room Floor: 2 Nos. × Length 2.10 m × Width 1.82 m = 7.644 SqmTotal Quantity = 62.634 Sqm |
| 106 | Dismantling aluminum/Gypsum partition.doors.windows,fixed glazing and false ceiling including disposal of unservieable materials and stacking of serviceable materials with in 50 M leads all lead as per directed by E/I• False Ceiling: 1 No. × Length 3.90 m × Width 14.10 m = 54.990 Sqm• Trail Room: 1 No. × Length 1.82 m × Width 2.10 m = 3.822 Sqm• Wall Panelled (Wall 1): 2 Nos. × Length 14.10 m × Height 3.00 m = 84.600 Sqm• Wall Panelled (Wall 2): 1 No. × Length 3.90 m × Height 3.00 m = 11.700 Sqm• Wall Panelled (Wall 3): 2 Nos. × Length 2.10 m × Height 3.00 m = 12.600 Sqm• Wall Panelled (Wall 4): 4 Nos. × Length 2.10 m × Height 3.00 m = 25.200 Sqm• Wall Panelled (Wall 5): 2 Nos. × Length 1.07 m × Height 3.00 m = 6.420 Sqm• Wall Panelled (Wall 6): 2 Nos. × Length 1.82 m × Height 3.00 m = 10.920 Sqm• Glazed Racks: 14 Nos. × Length 3.60 m × Width 0.60 m = 30.240 Sqm• Glazed Racks End: 1 No. × Length 0.45 m × Width 0.60 m = 0.270 SqmTotal Quantity = 240.762 Sqm |
| 107 | Providing and laying in position ( P.C.C) M-200 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size)• Floor Bed 1: 1 No. × Length 3.90 m × Width 14.10 m × Depth 0.10 m = 5.499 Cum• Floor Bed 2: 2 Nos. × Length 2.10 m × Width 1.82 m × Depth 0.10 m = 0.764 CumTotal Quantity = 6.263 Cum |
| 108 | 38 mm thick wood block flooring first class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4 (1 cement :2 course sand :4 graded stone aggregate 10 mm nominal size) to be paod separately coated with a tjin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg/sqm,including fixing blocks in position after dipping in hot bitumen (blown type) up to hafl depth,planed.levelled smooth and finished complete.(Wooden Texture)• Flooring Area: 1 No. × Length 3.90 m × Width 14.10 m = 54.990 SqmTotal Quantity = 54.990 Sqm |
| 109 | Providing and fixing frameless (Sensor) Grey automatic Double leaf sliding glass door with all Complete job as per dierction of E/I (For Main Gate of Emporium) ( Size of Door is 7'-0''x10-0'') or as per requirement• 1 Set Complete = 1 No. |
| 110 | Providing and fixing panelled or panelled and glazing in panelled or panelled and glazed shuttera for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) comforming to IS: 1328(a) For Kurta Reck: - Horizontal (Top): 1 No. × Length 3.60 m × Width 0.76 m = 2.736 Sqm - Horizontal Shelves: 4 Nos. × Length 3.60 m × Width 0.60 m = 2.160 Sqm - Horizontal Shelf: 2 Nos. × Length 1.82 m × Width 0.60 m = 1.092 Sqm - Vertical Ends: 2 Nos. × Length 0.67 m × Height 2.75 m = 3.685 Sqm - Vertical Divider: 1 No. × Length 0.60 m × Height 2.75 m = 1.650 Sqm - Back Panel: 1 No. × Length 3.60 m × Height 2.75 m = 9.900 Sqm - Shelves Sides: 8 Nos. × Length 1.20 m × Height 0.375 m = 3.600 Sqm - Shelves Sides: 8 Nos. × Length 0.60 m × Height 0.70 m = 3.360 Sqm - Bottom Panels: 8 Nos. × Length 0.45 m × Width 0.60 m = 0.270 Sqm - Sides: 16 Nos. × Length 0.60 m × Height 0.375 m = 3.600 Sqm - Flexible Ply Design: 1 No. × Length 3.60 m × Height 0.225 m = 0.810 Sqm - Flexible Ply Band: 1 No. × Length 3.60 m × Width 0.15 m = 0.540 Sqm(b) For Docra Reck: - Horizontal (Top): 1 No. × Length 3.60 m × Width 0.67 m = 2.412 Sqm - Horizontal Shelves: 6 Nos. × Length 3.60 m × Width 0.60 m = 2.160 Sqm - Vertical Ends: 2 Nos. × Length 0.67 m × Height 2.75 m = 3.685 Sqm - Vertical Sub-dividers: 8 Nos. × Length 0.60 m × Height 2.75 m = 13.200 Sqm - Back Panel: 1 No. × Length 3.60 m × Height 2.75 m = 9.900 Sqm - Shelves: 16 Nos. × Length 1.20 m × Height 0.30 m = 5.760 Sqm - Shelves Dividers: 32 Nos. × Length 0.45 m × Height 0.30 m = 4.320 Sqm - Bottom Base: 16 Nos. × Length 0.60 m × Width 0.67 m = 0.402 Sqm - Flexible Ply Design: 1 No. × Length 3.60 m × Height 0.225 m = 0.810 Sqm - Flexible Ply Band: 1 No. × Length 3.60 m × Width 0.15 m = 0.540 Sqm(c) For Saree Reck: - Horizontal (Top): 2 Nos. × Length 3.60 m × Width 0.67 m = 2.412 Sqm - Horizontal Shelves: 8 Nos. × Length 3.60 m × Width 0.60 m = 2.160 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.75 m = 7.370 Sqm - Vertical Intermediate: 2 Nos. × Length 0.67 m × Height 2.75 m = 3.685 Sqm - Flexible Ply Design: 2 Nos. × Length 3.60 m × Height 0.225 m = 1.620 Sqm - Flexible Ply Band: 2 Nos. × Length 3.60 m × Width 0.15 m = 0.540 Sqm - Shelves: 16 Nos. × Length 0.60 m × Height 0.375 m = 3.600 Sqm - Bottom Base: 16 Nos. × Length 0.60 m × Height 0.375 m = 3.600 Sqm(d) Handicraft Art Stand & Bed Sheet Reck: - Handicraft Stand Top: 1 No. × Length 2.10 m × Width 0.76 m = 1.596 Sqm - Handicraft Stand Shelves: 4 Nos. × Length 2.10 m × Width 0.60 m = 1.260 Sqm - Handicraft Stand Vertical: 5 Nos. × Length 0.67 m × Height 0.75 m = 2.510 Sqm - Handicraft Stand Bottom: 10 Nos. × Length 0.45 m × Width 0.60 m = 0.270 Sqm - Flexible Ply Design: 1 No. × Length 3.60 m × Height 0.225 m = 0.810 Sqm - Flexible Ply Band: 1 No. × Length 3.60 m × Width 0.15 m = 0.540 Sqm - Bed Sheet Horizontal Top: 1 No. × Length 3.60 m × Width 0.76 m = 2.736 Sqm - Bed Sheet Shelves: 5 Nos. × Length 3.60 m × Width 0.60 m = 2.160 Sqm - Bed Sheet Verticals: 2 Nos. × Length 0.60 m × Height 2.75 m = 3.300 Sqm - Bed Sheet Vertical Divider: 1 No. × Length 0.60 m × Height 1.82 m = 1.092 Sqm - Flexible Ply Design: 1 No. × Length 3.60 m × Height 0.225 m = 0.810 Sqm - Flexible Ply Band: 1 No. × Length 3.60 m × Width 0.15 m = 0.540 Sqm - Bed Sheet Shelves Sides: 8 Nos. × Length 1.20 m × Height 0.375 m = 3.600 Sqm - Bed Sheet Bottom Base: 16 Nos. × Length 0.60 m × Height 0.375 m = 3.600 Sqm(e) For Reception Table: - Front Side: 1 No. × Length 2.25 m × Height 1.06 m = 2.385 Sqm - Both Outer Sides: 2 Nos. × Length 0.60 m × Height 1.06 m = 1.272 Sqm - Inside Partitions: 2 Nos. × Length 0.67 m × Height 1.06 m = 1.420 Sqm - Inside Trays: 2 Nos. × Length 0.45 m × Width 0.60 m = 0.270 Sqm - Top & Bottom Portion: 2 Nos. × Length 2.25 m × Width 0.60 m = 1.350 Sqm - Rack Shutters: 2 Nos. × Length 0.60 m × Height 1.06 m = 1.272 Sqm(f) Wall Panelling: - Hall Main Wall: 2 Nos. × Length 14.10 m × Height 3.00 m = 84.600 Sqm - Hall Side Wall: 1 No. × Length 3.90 m × Height 3.00 m = 11.700 Sqm - Deduct Door Opening: -1 No. × Length 2.10 m × Height 3.00 m = -6.300 Sqm - Trail Room Wall 1: 4 Nos. × Length 2.10 m × Height 3.00 m = 25.200 Sqm - Trail Room Wall 2: 4 Nos. × Length 1.82 m × Height 3.00 m = 21.840 SqmTotal Decorative Plywood Quantity = 271.412 Sqm |
| 111 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surfacs layer and reverse side adhesive bonding quality conforming to IS : 2045 Type S,including cost of adhesive of approved quality(a) Kurta Reck (dual surfaces): - Horizontal (Top): 2 Nos. × Length 3.60 m × Width 0.76 m = 5.472 Sqm - Horizontal Shelves: 8 Nos. × Length 3.60 m × Width 0.60 m = 17.280 Sqm - Horizontal Shelf: 4 Nos. × Length 1.82 m × Width 0.60 m = 4.368 Sqm - Bottom Panels: 16 Nos. × Length 0.45 m × Width 0.60 m = 4.320 Sqm(b) Docra Reck (dual surfaces): - Horizontal (Top): 2 Nos. × Length 3.60 m × Width 0.67 m = 4.824 Sqm - Horizontal Shelves: 12 Nos. × Length 3.60 m × Width 0.60 m = 25.920 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.75 m = 7.370 Sqm - Vertical Intermediate: 16 Nos. × Length 0.60 m × Height 2.75 m = 26.400 Sqm - Back Face: 2 Nos. × Length 3.60 m × Height 2.75 m = 19.800 Sqm - Shelves Sides: 32 Nos. × Length 1.20 m × Height 0.30 m = 11.520 Sqm - Shelves Dividers: 64 Nos. × Length 0.45 m × Height 0.30 m = 8.640 Sqm - Bottom Base: 32 Nos. × Length 0.60 m × Width 0.67 m = 12.864 Sqm(c) Saree Reck (dual surfaces): - Horizontal (Top): 4 Nos. × Length 3.60 m × Width 0.67 m = 9.648 Sqm - Horizontal Shelves: 16 Nos. × Length 3.60 m × Width 0.60 m = 34.560 Sqm - Vertical Ends: 8 Nos. × Length 0.67 m × Height 2.75 m = 14.740 Sqm - Vertical Intermediate: 4 Nos. × Length 0.67 m × Height 2.75 m = 7.370 Sqm - Flexible Laminate: 4 Nos. × Length 3.60 m × Height 0.225 m = 3.240 Sqm - Flexible Laminate Band: 4 Nos. × Length 3.60 m × Width 0.15 m = 2.160 Sqm(d) Handicraft Art Stand & Bed Sheet Reck (dual surfaces): - Handicraft Stand Top: 2 Nos. × Length 2.10 m × Width 0.76 m = 3.192 Sqm - Handicraft Stand Shelves: 8 Nos. × Length 2.10 m × Width 0.60 m = 10.080 Sqm - Handicraft Stand Vertical: 10 Nos. × Length 0.67 m × Height 0.75 m = 5.030 Sqm - Handicraft Stand Bottom: 20 Nos. × Length 0.45 m × Width 0.60 m = 5.400 Sqm - Bed Sheet Top: 2 Nos. × Length 3.60 m × Width 0.76 m = 5.472 Sqm - Bed Sheet Shelves: 10 Nos. × Length 3.60 m × Width 0.60 m = 21.600 Sqm - Bed Sheet Verticals: 4 Nos. × Length 0.60 m × Height 2.75 m = 6.600 Sqm - Bed Sheet Vertical Divider: 2 Nos. × Length 0.60 m × Height 1.82 m = 2.184 Sqm - Bed Sheet Shelves Sides: 16 Nos. × Length 1.20 m × Height 0.375 m = 7.200 Sqm - Bed Sheet Bottom Base: 32 Nos. × Length 0.60 m × Height 0.375 m = 7.200 Sqm(e) Reception Table & Display Tables: - Front Face: 2 Nos. × Length 2.25 m × Height 1.06 m = 4.770 Sqm - Both Outer Sides: 4 Nos. × Length 0.60 m × Height 1.06 m = 2.544 Sqm - Insides: 4 Nos. × Length 0.67 m × Height 1.06 m = 2.841 Sqm - Trays: 4 Nos. × Length 0.45 m × Width 0.60 m = 1.080 Sqm - Top & Bottom Portion: 4 Nos. × Length 2.25 m × Width 0.60 m = 5.400 Sqm - Rack Shutters: 4 Nos. × Length 0.60 m × Height 1.06 m = 2.544 Sqm - Display Table: 3 Nos. × Length 1.82 m × Height 1.20 m = 6.552 Sqm(f) Wall Panelling: - Hall Main Wall: 2 Nos. × Length 14.10 m × Height 3.00 m = 84.600 Sqm - Hall Side Wall: 1 No. × Length 3.90 m × Height 3.00 m = 11.700 Sqm - Deduct Door Opening: -1 No. × Length 2.10 m × Height 3.00 m = -6.300 Sqm - Trail Room Wall 1: 4 Nos. × Length 2.10 m × Height 3.00 m = 25.200 Sqm - Trail Room Wall 2: 4 Nos. × Length 1.82 m × Height 3.00 m = 21.840 SqmTotal Decorative Laminate Quantity = 457.225 Sqm |
| 112 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section,power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I. wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound,jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture's specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I but excluding the cost of painting with:• Main Area: 1 No. × Length 3.90 m × Width 14.10 m = 54.990 Sqm• For Trail Room: 2 Nos. × Length 2.10 m × Width 1.82 m = 7.644 Sqm• Sub-total Area = 62.634 Sqm• Assume 10% extra for Design and profiles = 6.290 SqmTotal Quantity = 68.924 Sqm |
| 113 | Supplying,fitting and fixing good quality,well dressed and well seasoned teak wood for Reck of all types of Cloths frame including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I• Frame Vertical: 3×6 Nos. × 0.06 m × 0.06 m × 1.06 m = 0.300 Cum• Frame Horizontal 1: 3×6 Nos. × 1.82 m × 0.05 m × 0.05 m = 0.082 Cum• Frame Horizontal 2: 3×3 Nos. × 1.20 m × 0.05 m × 0.05 m = 0.027 CumTotal Quantity = 0.409 Cum |
| 114 | Providing and fixing aluminium work for door, windows,ventilators and partition with extruded built to standard tubular section/appropiate Z- section and other section of approve make conforming to IS; 733 and IS: 1285,fixing with dsah fasteners of required dia.and size,including necessary filling up the gaps at neoprene i,e at top,bttom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth,rust free, straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snaps beading for glazing/panneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and direction of E/I. (Glazing,paneling and dash fasteners to be paid for separately) For shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fitting wherver required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) (Jindal) Power coated aluminium (minimum thickness of power coating 50 micron)• Showcase Shutters 1: 2 Nos. × Length 1.82 m × Height 1.06 m = 3.858 Sqm• Showcase Shutters 2: 2 Nos. × Length 1.20 m × Height 1.06 m = 2.544 Sqm• Total Area = 6.402 Sqm (78.01 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 62.400 Kg |
| 115 | Providing and fixing machine mouled aluminium coverering of approved pattern and design,made out machine sut aluminium sheet and machine hoted for receiving dash fastener,cover exoension joints on vertical surfaces/ ceiling floors,the fixing on lpate dash fasteners of 8 mm dia and 75 mm long bolts including providing aluminium washers 2 mm thick and 15 mm dia,at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandeable plastic sleeves in holes etc. complete as per dierction of E/I (At out side of Emporium) Anodised aluminium sheet 2.5 mm thick (anodised transperent or dyed to required shade according to IS:1868 Minimum anodic coating of grade AC 15)• Outside Fascia 1: 2 Nos. × Length 1.20 m × Height 2.40 m = 5.760 Sqm• Outside Fascia 2: 1 No. × Length 3.90 m × Height 0.90 m = 3.510 Sqm• Hall Wall 1: 2 Nos. × Length 14.10 m × Height 3.00 m = 84.600 Sqm• Hall Wall 2: 1 No. × Length 3.90 m × Height 3.00 m = 11.700 Sqm• Trail Room Wall 1: 4 Nos. × Length 2.10 m × Height 3.00 m = 25.200 Sqm• Trail Room Wall 2: 4 Nos. × Length 1.82 m × Height 3.00 m = 21.840 Sqm• Deduct Door Opening 1: -2 Nos. × Length 0.76 m × Height 2.10 m = -3.192 Sqm• Deduct Door Opening 2: -1 No. × Length 2.10 m × Height 3.00 m = -6.300 Sqm• Total Area = 143.118 Sqm (1539.97 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 1231.970 Kg |
| 116 | Providing and Fixing LED Display TV panel with all required connection with all complete Job (Sumsung Crytal 4K Vision AI 163 cm (65 inches)Utra HD (4k) LED Smart.• 1 Set Complete = 1 No. |
| 117 | Poviding and fixing wall pices Jharkhand Map waterproof Vinlyl stricker paper poster size (24''x36''),high quality posters are printed from high resolusion image with self adhesive. and all other necessary required all complete Job.• 18 Nos. Posters Complete = 18 Nos. |
| 118 | Providing and fixing glazing in aluminium door,window,ventilator shutter and partitions etc. with EPDM/ rubber/neoprene gasket eyc. Complete as per the architectural drawing and the directions of E/I (Cost of aluminium snap beading shall be paid in basic item) With flot glass panes of 8 mm thicness ( weight less than 20 Kg/Sqm)• Showcase Top, Middle & Bottom: 3×3 Nos. × Length 1.82 m × Width 1.20 m = 196.560 Sqm• Showcase Sides 1: 3×2 Nos. × Length 1.82 m × Height 1.20 m = 13.100 Sqm• Showcase Sides 2: 3×2 Nos. × Length 1.20 m × Height 1.20 m = 8.640 Sqm• Display Spaces 1: 2 Nos. × Length 0.90 m × Height 2.40 m = 4.320 Sqm• Display Spaces 2: 2 Nos. × Length 0.75 m × Height 2.40 m = 3.600 SqmTotal Glazing Area = 222.620 Sqm |
| 119 | Poviding and fixing Dokra and other materials with wooden frame in for different states with painting and all other necessary required all complete Job.• 29 Nos. Art Frames Complete = 29 Nos. |
| 120 | Providing and fixing chromium plates brass handle with necessary screws,nut and washers etc. complete 125mm• Total Quantity = 180 Nos. |
| 121 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete 125x63x4mm• Total Quantity = 6 Nos. |
| 122 | Providing and fixing oxidised M.S hasp and staple (afety type) conforming to IS: 363 with necessary screws etc. complete 90.mm• Total Quantity = 250 Nos. |
| 123 | Providing and fixing aluminium sliding door bolts,ISI marked anolised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade,with nuts and screws etc.complete 300x16 mm• Total Quantity = 250 Nos. |
| 124 | Proving and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete. • Total Quantity = 150 Nos. |
| 125 | Finishing walls with texture or Rastic exterior paint of required shade:- New work (Two or more coats applied @ 3.28 liter/10 Sqm) over and including piming coat of exterior primer applied @ 2.20 Kg/10 Sqm• Area 1: 1 No. × Length 1.65 m × Height 3.00 m = 4.950 Sqm• Area 2: 2 Nos. × Length 0.90 m × Height 3.00 m = 5.400 Sqm• Area 3: 2 Nos. × Length 0.90 m × Height 0.90 m = 1.620 SqmTotal Quantity = 11.970 Sqm |
| 126 | Distemper with oil bound washable distemper of approved brand and manufacture to give even shade:- New work ( two or more coats) over and including water thinnable priming coat with cement primer• Under False Ceiling: 1 No. × Length 3.90 m × Width 14.10 m = 54.990 SqmTotal Quantity = 54.990 Sqm |
| 127 | Providing and fixing mirror of suprior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Oval shape 450x350mm (Outer Diamensions)• Oval shape 450x350 mm: 2 Nos. × Length 0.90 m × Height 2.40 m = 4.320 Sqm |
| 128 | Providing and fixing waterproof strickers featuring traditional soharai ethnic art styled for ladies and gents garments (Such as heat transfer prints like Kurtis and Sarees) with self adhesive with all complete job. ( At out side of Emporium)• Panel 1: 2 Nos. × Length 0.90 m × Height 2.40 m = 4.320 Sqm• Panel 2: 1 No. × Length 3.90 m × Height 0.60 m = 2.340 SqmTotal Quantity = 6.660 Sqm |
| 129 | Providing and fixing 2nd class wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/nail on the edges of the Pre-laminated particle board as per direction of E/I• Lipping: 2 Nos. × Length 2.25 m = 2.250 Mtr• Beading in front of Reception Table: 1 No. × 65.00 m = 65.000 MtrTotal Quantity = 67.250 Mtr |
| 130 | Point Wiring in PVC conduit with piano type switch Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required. Group-B• Total Points = 16 Nos. |
| 131 | Power plug wiring in PVC coduit (2x4 Sq.mm) Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.• Total Outlets = 202 Nos. |
| 132 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amp,3 pin socket outlet• Total Quantity = 32 Nos. |
| 133 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amp one way switch• Total Quantity = 16 Nos. |
| 134 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 121mmx173mmx48mm deep (6''x8'')• Total Quantity = 4 Nos. |
| 135 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 72mmx146mmx48mm deep (4''x7'')• Total Quantity = 1 No. |
| 136 | Supplying and fixing Batten holder: Supplying and fixing Batten/ angle holder including connection etc. as required.:• Total Quantity = 12 Nos. |
| 137 | Supplying and fixing 2 pin 5 amp Ceiling rose on the existing junction box/wooden block including connection etc. as required.• Total Quantity = 45 Nos. |
| 138 | Supplying and fixing Modular type electronic fan regulator:- Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.• Total Quantity = 8 Nos. |
| 139 | Supply Installation,testing and commissioning of following size ceiling or side fan 3 blades confirming to IS: 374 :2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm FR PVC insulated copper wire suitable for 230 V 50Hz,single phase supply etc complete required. 1200 mm (48'') Ceiling or Side fan• Total Quantity = 8 Nos. |
| 140 | Supply Installation,testing and commissioning of following size ceiling or side fan 3 blades confirming to IS: 374 :2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm FR PVC insulated copper wire suitable for 230 V 50Hz,single phase supply etc complete required. Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton• Total Quantity = 2 Nos. |
| 141 | Supply , installation, testing & Commissioning of ceiling suspended DX type 4-WAY CASSETTE AC units with air cooled condenser complete with 5 Star Inverter type scroll/rotary compressor ,condenser ,wiring & accessories . Indoor units shall be ceiling suspended type complete with evaporator ,fan, filter ,drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge , cordless remote controls. The unit shall be suitable for working at 240 ± 10% ,50 Hz,1 phase AC supply .The unit shall be designed to take care of minimum vertical head 5mt & horizontal length of 30 mt & necessary oil separator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per approved make, ) with necessary vibration isolation arrangement as per site condition etc.The Outdoor unit Compressor must be provided with 5 Year Warranty Period.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition. Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts.2.0TRREFRIGERANT PIPING Supply, fixing, testing and commissioning of interconnecting soft/hard drawn copper refrigerant pipe work of following outer diameter duly insulated with fire rated class'O' closed cell elastomeric nitrile rubber type tubular insulation (19mm/13mm thick) between indoor & outdoor units . All piping should be laid on Galvanized/Powder Coated tray supported by Galvanized M S Hangers & Clamps and all external piping shall run in covered cable trays. The rate includes all the items required to complete the piping work and nothing extra should be payable.Vaccumiazation & Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition.6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr ,9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr.Providing and fixing of cPVC drain water piping complete with fittings, flexible connection to IDU, necessary support as per specification and insulated with 6 mm thick fire rated class'O' closed cell elastomeric nitrile rubber insulation-6mtr COMMUNICATION CABLE BETWEEN INDOOR AND OUTDOOR,OUTDOOR UNIT AC STAND ,AC INSTALLATION CHARGES,VOLTAGE STABLIZER 5kvamake- v-guard,voltas ,microtekmake AC- Daikin ,LG,Hitachi,Carrier• Total Quantity = 3 Nos. |
| 142 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x1.5 sq.mm+1x1.5 sq.mm earth wire• Total Length = 195.000 Mtr. |
| 143 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x2.5 sq.mm+1x2.5 sq.mm earth wire• Total Length = 135.000 Mtr. |
| 144 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 4x10.0 sq mm+2x6.0 sq mm earth wire• Total Length = 65.000 Mtr. |
| 145 | 2.18S/F 20 amps SPN MCB industrial socket outlet:-Supplying and fixing 20 amps, 240 volts,SPN industrial type, socket outlet, with 2 pole and and earth, metal enclosed plug top along with 20 amps 'c' series, SP MCCB, insheet steel enclosure,in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.• Total Quantity = 3 Nos. |
| 146 | S/F T.P.MCB DB:-Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) 4 way (4+12),Double door, Horizontal type• Total Quantity = 1 No. |
| 147 | Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)• Total Quantity = 2 Sets |
| 148 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 1'X1' led Panel light• Total Quantity = 5 Nos. |
| 149 | Supplying,installation,testing and commissioning of Wire less CCTV Cameras,including wiring and all other necessary accessories as required all complete job.• Total Quantity = 8 Nos. |
| 150 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15/16 led Round Down light• Total Quantity = 40 Nos. |
| 151 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15 W COB based LED light with multiple beam angle (36 degree)• Total Quantity = 30 Nos. |
| 152 | S.I.T.C of following rating recess/surface mounted LED bulb suitable for 230 V 50 Hz single phase supply etc. complete as required.• Total Quantity = 6 Nos. |
| 153 | Poviding and fixing 3D brass letters for Logo signage.The height at top- 12'',at middle-9'' and at bottom-4'' .The minimum thickness of the letters is at top- 2'' at middle-1.5'' and at bottom-12mm finished and lighting at front Side of Emporium and all other necessary required all complete Job. (At Outside of the Emporium)• Signage Area: 1 No. × Length 1.20 m × Height 0.45 m = 0.540 Sqm |
| 154 | Particulars with Specification |
| 155 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm,depth,watering and disopsal of unserviceable materials with all leads all complete as per direction of E/I• Inside Wall 1: 2 Nos. × L 2.80 m × H 3.35 m = 18.76 Sqm• Inside Wall 2: 2 Nos. × L 7.90 m × H 3.35 m = 52.93 Sqm• Deduct Opening: -1 No. × L 1.50 m × H 2.10 m = -3.15 Sqm• Total Plaster Area = 68.54 Sqm• Assume 15% of total plaster area for repair/dismantling = 10.281 Sqm |
| 156 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I• Surface Area: 4 Nos. × L 0.90 m × H 1.20 m = 4.32 Sqm |
| 157 | Dismantling plain cement or lime concrete work including stacking servieable materials in countable stacks within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Floor Concrete: 1 No. × L 8.40 m × W 2.80 m × D 0.10 m = 2.352 Cum |
| 158 | Dismantling dressed stone work ahhlar face stone work,marble work or orecast concrete work manually and disposal of unserviceable material within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• Wall tiles (For Toilet): 2 Nos. × L 1.82 m × H 2.10 m = 7.644 Sqm• For Emporium House: 1 No. × L 7.90 m × W 2.80 m = 22.120 SqmTotal Quantity = 29.764 Sqm |
| 159 | Dismantling of flushing cictern of all types (C.I/PVG/Vitrious China) including stacking of useful materials near the site and disposl of unserviceable materials within 50 metre lead.• Total Cisterns = 2 Nos. Complete |
| 160 | Providing and laying in position ( P.C.C) M-200 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size)• Floor Base Bed: 1 No. × L 8.40 m × W 2.80 m × D 0.10 m = 2.352 Cum |
| 161 | Providing 12 mm Thk. cement plaster(1:4) in wall with clean coarse sand of FM-1.5 including mixing liquid intergral water proofing compound in concrete or plaster as per manufacture specification and as per direction of E/I .BrandiSika Plastocrate plus,MYK proof WP 10 ,Fosroc--Conplast x4211C,Dr. fixit Pidiproof LW+ OR Equivalent.• Replastered Wall: 2 Nos. × L 2.80 m × H 3.35 m = 10.27 Sqm |
| 162 | Providing and fixing Ist quality Ceramic glazed wall tiles conforming to IS: IS: 15622 (Thickness to be specified by the manufacturer),of approved make, in all colour, shades except brugundy,bottle,green,black of any size as approved by E/I, in skirting risers of steps and dodo,over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm,including pointing in white cement mixed with pigment of matching shade complete.• For Toilet: 2 Nos. × L 1.82 m × H 2.10 m = 3.822 Sqm |
| 163 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified floor tiles polished finish of Wooden Texture of size Size of tiles-1200x1200 mm• Wooden Texture Section: 1 No. × L 2.40 m × W 0.90 m = 2.16 Sqm• 1200×1200 mm Tiles Section: 1 No. × L 3.10 m × W 7.80 m = 24.18 SqmTotal Quantity = 26.340 Sqm |
| 164 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified floor tiles Matt/Antiskid finish of size For Toilet and Trail Room-Size of tiles-600x600 mm• Toilet & Trail Room: 1 No. × L 0.90 m × W 0.90 m = 0.81 Sqm |
| 165 | Providing and fixing frameless Grey automatic Double leaf sliding glass door with all Complete job as per dierction of E/I (For Main Gate of Emporium) ( Size of Door is 5'-0''x8-0'') or as per requirement• 1 Set Complete = 1 No. |
| 166 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section,power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I. wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound,jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture's specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I but excluding the cost of painting with:• Ceiling Section 1: 1 No. × L 2.40 m × W 0.90 m = 2.16 Sqm• Ceiling Section 2: 1 No. × L 2.80 m × W 7.50 m = 21.00 SqmTotal Quantity = 23.160 Sqm |
| 167 | Providing and fixing panelled or panelled and glazing in panelled or panelled and glazed shuttera for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) comforming to IS: 1328(a) For Kurta Reck: - Horizontal (Top): 1 No. × L 2.40 m × W 0.76 m = 1.824 Sqm - Horizontal Shelves: 4 Nos. × L 2.40 m × W 0.60 m = 5.760 Sqm - Vertical Ends: 2 Nos. × L 0.67 m × H 3.00 m = 4.020 Sqm - Vertical Divider: 1 No. × L 0.60 m × H 3.00 m = 1.800 Sqm - Back Panel: 1 No. × L 2.40 m × H 3.00 m = 7.200 Sqm - Shelves Sides: 10 Nos. × L 1.20 m × H 0.30 m = 3.600 Sqm - Shelves Inner Sides: 10 Nos. × L 0.45 m × H 0.30 m = 1.350 Sqm - Bottom Base: 10 Nos. × L 0.525 m × W 0.67 m = 3.518 Sqm(b) For Docra Reck: - Horizontal (Top): 1 No. × L 3.60 m × W 0.67 m = 2.412 Sqm - Horizontal Shelves: 6 Nos. × L 3.60 m × W 0.60 m = 12.960 Sqm - Vertical Ends: 2 Nos. × L 0.67 m × H 3.00 m = 4.020 Sqm - Vertical Sub-dividers: 8 Nos. × L 0.60 m × H 3.00 m = 14.400 Sqm - Back Panel: 1 No. × L 3.60 m × H 3.00 m = 10.800 Sqm - Shelves Sides: 14 Nos. × L 1.20 m × H 0.30 m = 5.040 Sqm - Shelves Dividers: 28 Nos. × L 0.45 m × H 0.30 m = 3.780 Sqm - Bottom Base: 14 Nos. × L 0.60 m × W 0.67 m = 5.628 Sqm(c) For Saree Reck: - Horizontal (Top): 1 No. × L 3.60 m × W 0.67 m = 2.410 Sqm - Horizontal Shelves: 4 Nos. × L 3.60 m × W 0.60 m = 8.640 Sqm - Vertical Ends: 2 Nos. × L 0.67 m × H 3.00 m = 4.020 Sqm - Vertical Intermediate: 3 Nos. × L 0.67 m × H 2.10 m = 4.221 Sqm - Flexible Ply for Design: 1 No. × L 3.60 m × H 0.225 m = 0.810 Sqm - Shelves Tiers: 48 Nos. × L 1.20 m × H 0.45 m = 25.920 Sqm - Bottom Base: 12 Nos. × L 0.67 m × W 0.67 m = 5.387 Sqm(d) For Reception Table: - Front Side: 1 No. × L 2.25 m × H 1.06 m = 2.385 Sqm - Both Outer Sides: 2 Nos. × L 0.60 m × H 1.06 m = 1.272 Sqm - Inside Partitions: 2 Nos. × L 0.67 m × H 1.06 m = 1.420 Sqm - Inner Trays: 2 Nos. × L 0.45 m × W 0.60 m = 0.540 Sqm - Top & Bottom Portion: 2 Nos. × L 2.25 m × W 0.60 m = 2.700 Sqm - Rack Shutters: 2 Nos. × L 0.60 m × H 1.06 m = 1.272 Sqm(e) Trail Room & Wall Panelling: - Trail Room Walls: 2 Nos. × L 0.90 m × H 3.35 m = 6.030 Sqm - Trail Room Screen: 1 No. × L 1.50 m × H 2.85 m = 4.275 Sqm - Main Wall Panelling: 2 Nos. × L 7.00 m × H 2.85 m = 39.900 Sqm - Side Wall Panelling 1: 1 No. × L 2.80 m × H 2.85 m = 7.980 Sqm - Side Wall Panelling 2: 1 No. × L 1.90 m × H 2.85 m = 5.415 Sqm - Side Wall Panelling 3: 2 Nos. × L 1.82 m × H 2.85 m = 10.374 SqmTotal Decorative Plywood Quantity = 212.709 Sqm |
| 168 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surfacs layer and reverse side adhesive bonding quality conforming to IS : 2045 Type S,including cost of adhesive of approved quality(a) Kurta Reck (dual surfaces): - Horizontal (Top): 2 Nos. × L 2.40 m × W 0.75 m = 3.600 Sqm - Shelves: 8 Nos. × L 2.40 m × W 0.60 m = 11.520 Sqm - Vertical Ends: 4 Nos. × L 0.67 m × H 3.00 m = 8.040 Sqm - Vertical Divider: 2 Nos. × L 0.60 m × H 3.00 m = 3.600 Sqm - Back Face: 2 Nos. × L 2.40 m × H 3.00 m = 14.400 Sqm - Shelf Sides: 20 Nos. × L 1.20 m × H 0.30 m = 7.200 Sqm - Inner Shelf Sides: 20 Nos. × L 0.45 m × H 0.30 m = 2.700 Sqm - Bottom Base: 20 Nos. × L 0.525 m × W 0.67 m = 7.035 Sqm(b) Docra Reck (dual surfaces): - Top: 2 Nos. × L 3.60 m × W 0.67 m = 4.824 Sqm - Shelves: 12 Nos. × L 3.60 m × W 0.60 m = 25.920 Sqm - Vertical Ends: 4 Nos. × L 0.67 m × H 3.00 m = 8.040 Sqm - Vertical Dividers: 16 Nos. × L 0.60 m × H 3.00 m = 28.800 Sqm - Back Face: 2 Nos. × L 3.60 m × H 3.00 m = 21.600 Sqm - Shelf Sides: 14 Nos. × L 1.20 m × H 0.30 m = 5.040 Sqm - Shelf Dividers: 56 Nos. × L 0.45 m × H 0.30 m = 7.560 Sqm - Bottom Base: 28 Nos. × L 0.60 m × W 0.67 m = 11.256 Sqm(c) Saree Reck (dual surfaces): - Top: 2 Nos. × L 3.60 m × W 0.67 m = 4.824 Sqm - Shelves: 8 Nos. × L 3.60 m × W 0.60 m = 17.280 Sqm - Vertical Ends: 4 Nos. × L 0.67 m × H 3.00 m = 8.040 Sqm - Vertical Intermediate: 6 Nos. × L 0.67 m × H 2.10 m = 8.442 Sqm - Flexible Laminate Design: 2 Nos. × L 3.60 m × H 0.225 m = 1.620 Sqm - Shelves Faces: 96 Nos. × L 1.20 m × H 0.45 m = 51.840 Sqm - Bottom: 24 Nos. × L 0.67 m × W 0.67 m = 10.770 Sqm(d) Reception Table (dual surfaces): - Front Face: 2 Nos. × L 2.25 m × H 1.06 m = 4.770 Sqm - Both Sides: 4 Nos. × L 0.60 m × H 1.06 m = 2.544 Sqm - Insides: 2 Nos. × L 0.67 m × H 1.06 m = 1.420 Sqm - Trays: 4 Nos. × L 0.45 m × W 0.60 m = 1.080 Sqm - Top & Bottom: 4 Nos. × L 2.25 m × W 0.60 m = 5.400 Sqm - Shutters: 4 Nos. × L 0.67 m × H 1.06 m = 2.841 Sqm(e) Showcase, Partition & Wall Panelling: - Partition Wall: 8 Nos. × L 0.90 m × H 3.35 m = 24.120 Sqm - Showcase Sides: 8 Nos. × L 0.25 m × H 1.06 m = 2.120 Sqm - Showcase Faces: 12 Nos. × L 0.20 m × H 1.06 m = 2.544 Sqm - Showcase Shelves: 12 Nos. × L 0.50 m × W 0.20 m = 1.200 Sqm - Trail Room: 2 Nos. × L 0.90 m × H 3.35 m = 6.030 Sqm - Trail Room Screen: 1 No. × L 1.50 m × H 2.85 m = 4.275 Sqm - Main Wall Panelling: 2 Nos. × L 7.00 m × H 2.85 m = 39.900 Sqm - Side Panelling 1: 1 No. × L 2.80 m × H 2.85 m = 7.980 Sqm - Side Panelling 2: 1 No. × L 1.90 m × H 2.85 m = 5.415 Sqm - Side Panelling 3: 1 No. × L 1.82 m × H 2.85 m = 5.187 SqmTotal Decorative Laminate Quantity = 385.590 Sqm |
| 169 | Supplying,fitting and fixing good quality,well dressed and well seasoned teak wood for Reck of all types of Cloths frame including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I• Frame: 8 Nos. × L 0.076 m × W 0.05 m × H 1.06 m = 0.032 Cum• Rack Frame for Clothes: 12 Nos. × L 0.05 m × W 0.45 m × H 1.06 m = 0.286 Cum• Sub-frame Members: 12 Nos. × L 0.05 m × W 0.05 m × H 0.60 m = 0.018 CumTotal Quantity = 0.336 Cum |
| 170 | Providing and fixing aluminium work for door, windows,ventilators and partition with extruded built to standard tubular section/appropiate Z- section and other section of approve make conforming to IS; 733 and IS: 1285,fixing with dsah fasteners of required dia.and size,including necessary filling up the gaps at neoprene i,e at top,bttom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth,rust free, straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snaps beading for glazing/panneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and direction of E/I. (Glazing,paneling and dash fasteners to be paid for separately) For shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fitting wherver required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) (Jindal) Power coated aluminium (minimum thickness of power coating 50 micron)• Showcase Shutters 1: 4 Nos. × L 1.06 m × H 1.06 m = 4.494 Sqm• Showcase Shutters 2: 4 Nos. × L 0.50 m × H 1.06 m = 2.120 Sqm• Total Area = 6.614 Sqm (71.12 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 56.890 Kg |
| 171 | Providing and fixing machine mouled aluminium coverering of approved pattern and design,made out machine sut aluminium sheet and machine hoted for receiving dash fastener,cover exoension joints on vertical surfaces/ ceiling floors,the fixing on lpate dash fasteners of 8 mm dia and 75 mm long bolts including providing aluminium washers 2 mm thick and 15 mm dia,at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandeable plastic sleeves in holes etc. complete as per dierction of E/I (At out side of Emporium) Anodised aluminium sheet 2.5 mm thick (anodised transperent or dyed to required shade according to IS:1868 Minimum anodic coating of grade AC 15)• Panel 1: 2 Nos. × L 0.90 m × H 2.40 m = 4.320 Sqm• Panel 2: 2 Nos. × L 0.67 m × H 3.00 m = 4.020 Sqm• Total Area = 8.340 Sqm (89.73 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 71.790 Kg |
| 172 | Poviding and fixing wall pices Maharashra Map waterproof Vinlyl stricker paper poster size (24''x36''),high quality posters are printed from high resolusion image with self adhesive. and all other necessary required all complete Job.• 8 Nos. Posters Complete = 8 Nos. |
| 173 | Providing and fixing glazing in aluminium door,window,ventilator shutter and partitions etc. with EPDM/ rubber/neoprene gasket eyc. Complete as per the architectural drawing and the directions of E/I (Cost of aluminium snap beading shall be paid in basic item) With flot glass panes of 8 mm thicness ( weight less than 20 Kg/Sqm)• For Showcase: 4 Nos. × L 1.06 m × H 1.06 m = 4.494 Sqm• Showcase Sides: 4 Nos. × L 0.50 m × H 1.06 m = 2.120 Sqm• Showcase Shelves: 6 Nos. × L 0.50 m × H 1.06 m = 3.180 Sqm• For Display Spaces: 4 Nos. × L 1.20 m × H 2.40 m = 11.520 SqmTotal Quantity = 21.314 Sqm |
| 174 | Poviding and fixing Dokra and other materials with wooden frame in for different states with painting and all other necessary required all complete Job.• 12 Nos. Art Frames Complete = 12 Nos. |
| 175 | Providing and fixing Ialuminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete 200x10mm• Total Quantity = 4 Nos. |
| 176 | Providing and fixing chromium plates brass handle with necessary screws,nut and washers etc. complete 125mm• Total Quantity = 30 Nos. |
| 177 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete 125x63x4mm• Total Quantity = 16 Nos. |
| 178 | Providing and fixing oxidised M.S hasp and staple (afety type) conforming to IS: 363 with necessary screws etc. complete 90.mm• Total Quantity = 30 Nos. |
| 179 | Providing and fixing aluminium sliding door bolts,ISI marked anolised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade,with nuts and screws etc.complete 300x16 mm• Total Quantity = 56 Nos. |
| 180 | Providing and fixing aluminium hanging floor door stopper,ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade,with necessary screws etc. complete Twin rubber stopper• Total Quantity = 2 Nos. |
| 181 | Providing and fixing aluminium extruded section body tubular type universal/hydraulic door closer (having brand logo with IS: 3564 embossed on the body door weigth upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. comlpete. • Total Quantity = 1 No. |
| 182 | Finishing walls with texture or Rastic exterior paint of required shade:- New work (Two or more coats applied @ 3.28 liter/10 Sqm) over and including piming coat of exterior primer applied @ 2.20 Kg/10 Sqm• Inside Section 1: 4.32 Sqm + Section 2: 10.26 Sqm = 14.580 Sqm |
| 183 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including cost of cleaning surface thoroughy and removing the scales of smoke and moss marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/I.• Surface Area = 2.250 Sqm |
| 184 | Distemper with oil bound washable distemper of approved brand and manufacture to give even shade:- New work ( two or more coats) over and including water thinnable priming coat with cement primer• Gross Area: 28.140 Sqm Less Deduction: -0.810 Sqm = 27.330 Sqm |
| 185 | Providing and fixing waterproof strickers featuring traditional soharai ethnic art styled for ladies and gents garments (Such as heat transfer prints like Kurtis and Sarees) with self adhesive with all complete job. ( At out side of Emporium)• Display Panels: 2 Nos. × L 0.90 m × H 2.40 m = 4.320 Sqm |
| 186 | Providing one coat of wax polishing with mansion,waxpol or equivalent approved quality of wax polish over old or new wooden surface including cleaning the surface after removing dirt,scales,smokes,grease and sand papering,including cost of scaffolding and taxes all complete as per building specification abd direction of E/I• Total Area as per Wooden & Decorative Surfaces = 225.390 Sqm |
| 187 | Providing and fixing 2nd class wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/nail on the edges of the Pre-laminated particle board as per direction of E/I• Lipping: 2.25 Mtr + Beading in front of Reception Table: 65.00 Mtr = 67.250 Mtr |
| 188 | Providing and fixing white vitrous chaina type water closet ( European type W.C. pan) with seat and lid 10 litre low level white vitreous china. flushing cictern and C.P. flush bend with fitting and C.I brackets 40 mm flush bend,overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets,cutting and making good the wall and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.• Total Quantity = 1 No. |
| 189 | Providing and fixing 8 mm dia C.P/S.S. Jet with flexiable tube upto 1 metre long with S.S. Traingular type W.C. of quality and made as approved by E/I.• Total Quantity = 1 No. |
| 190 | Providing and fixing wash basin with C.I. brackets 15mm C.P brass single hole basin mixer of approved quality and make,including painting of fitting and brackets,cutting and making good the walls wherever required. White Vitreous chaina Wash basin size 630x400mm with a 15 mm C.P. brass single hole basin mixer.• Total Quantity = 1 No. |
| 191 | Providing and fixing C.P brass angle valve for basin mixer and geyser point of approved quality conforming to IS: 8931 15 mm nominal bore• Total Quantity = 1 No. |
| 192 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore,86 mm long,weighing not less than 88 gms• Total Quantity = 2 Nos. |
| 193 | Supplying,fitting and fixing the following items complete with all materials as per specification and direction of E/I. Mirror of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fitting 3 mm ply wood board and C.P. hinges to fix with mirror. Size-450mmx300mm• Total Quantity = 1 No. |
| 194 | C.P. brass tower rail 20mmx600mm with bracket container• Total Quantity = 1 No. |
| 195 | C.P. brass dish container medium quality with screw and hinges etc.• Total Quantity = 1 No. |
| 196 | Providing and fixing PVC waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexble pipe,40 mm dia.• Total Quantity = 1 No. |
| 197 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter• Total Length = 30.600 Rmt |
| 198 | Providing and fixing CPVC ( Chlorinated Polyxinyl Chloride pipes,having thermal stability for hot and cold water supply,including all CPVC plain brass threaded fittings,i/c fixing the pipe with clamps at 1.0 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. 15mm nominal outer dia pipes• Total Length = 25.000 Rmt |
| 199 | Providing and fixing CPVC ( Chlorinated Polyxinyl Chloride pipes,having thermal stability for hot and cold water supply,including all CPVC plain brass threaded fittings,i/c fixing the pipe with clamps at 1.0 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. 25 mm nominal outer dia pipes• Total Length = 15.000 Rmt |
| 200 | Providing and fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplasticsed Rigid PVC rain water conforming to IS: 13592 type A, including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap thermal expension-1 single socketed pipes. 110 mm dia.of PVC Bend or Elbows• Total Quantity = 12 Nos. |
| 201 | Point Wiring in PVC conduit with piano type switch Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required. Group-B• Total Points = 45 Nos. |
| 202 | Power plug wiring in PVC coduit (2x4 Sq.mm) Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.• Total Outlets = 155 Nos. |
| 203 | Supplying and fixing of the following size of along with accessories in surface/ recess PVC including cutting the wall and making good the same in case recessed conduit as required.conduit:- 32mm• Total Length = 58.500 Mtr. |
| 204 | Supplying and fixing of the following size of along with accessories in surface/ recess PVC including cutting the wall and making good the same in case recessed conduit as required.conduit:- 40mm• Total Length = 35.100 Mtr. |
| 205 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amp,3 pin socket outlet• Total Quantity = 15 Nos. |
| 206 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amp one way switch• Total Quantity = 12 Nos. |
| 207 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 121mmx173mmx48mm deep (6''x8'')• Total Quantity = 6 Nos. |
| 208 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 72mmx146mmx48mm deep (4''x7'')• Total Quantity = 1 No. |
| 209 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 75mmx75mmx50mm deep (4''x4'')• Total Quantity = 2 Nos. |
| 210 | Supplying and fixing Batten holder: Supplying and fixing Batten/ angle holder including connection etc. as required.:• Total Quantity = 45 Nos. |
| 211 | Supply , installation, testing & Commissioning of ceiling suspended DX type 4-WAY CASSETTE AC units with air cooled condenser complete with 5 Star Inverter type scroll/rotary compressor ,condenser ,wiring & accessories . Indoor units shall be ceiling suspended type complete with evaporator ,fan, filter ,drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge , cordless remote controls. The unit shall be suitable for working at 240 ± 10% ,50 Hz,1 phase AC supply .The unit shall be designed to take care of minimum vertical head 5mt & horizontal length of 30 mt & necessary oil separator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per approved make, ) with necessary vibration isolation arrangement as per site condition etc.The Outdoor unit Compressor must be provided with 5 Year Warranty Period.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition. Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts.2.0TRREFRIGERANT PIPING Supply, fixing, testing and commissioning of interconnecting soft/hard drawn copper refrigerant pipe work of following outer diameter duly insulated with fire rated class'O' closed cell elastomeric nitrile rubber type tubular insulation (19mm/13mm thick) between indoor & outdoor units . All piping should be laid on Galvanized/Powder Coated tray supported by Galvanized M S Hangers & Clamps and all external piping shall run in covered cable trays. The rate includes all the items required to complete the piping work and nothing extra should be payable.Vaccumiazation & Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition.6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr ,9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr.Providing and fixing of cPVC drain water piping complete with fittings, flexible connection to IDU, necessary support as per specification and insulated with 6 mm thick fire rated class'O' closed cell elastomeric nitrile rubber insulation-6mtr COMMUNICATION CABLE BETWEEN INDOOR AND OUTDOOR,OUTDOOR UNIT AC STAND ,AC INSTALLATION CHARGES,VOLTAGE STABLIZER 5kvamake- v-guard,voltas ,microtekmake AC- Daikin ,LG,Hitachi,Carrier• Total Quantity = 2 Nos. |
| 212 | Supplying and fixing T.P. MCB DB Supplying and fixing following way,single pole and neutral sheet,MCB distribution board 240 volton surface/recess,complete with tinned copper busbar,neutral busbar,earth bar, din bar, detachable gland plate,interconnection,phoshatized and power painted including earthing etc. as required (But without MCB/ RCCB /Isolator) 2 way,single door• Total Quantity = 4 Nos. |
| 213 | Supplying and fixing Modular type electronic fan regulator:- Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.• Total Quantity = 10 Nos. |
| 214 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x1.5 sq.mm+1x1.5 sq.mm earth wire• Total Length = 90.500 Mtr. |
| 215 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x2.5 sq.mm+1x2.5 sq.mm earth wire• Total Length = 30.150 Mtr. |
| 216 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 4x10.0 sq mm+2x6.0 sq mm earth wire• Total Length = 65.000 Mtr. |
| 217 | 2.18S/F 20 amps SPN MCB industrial socket outlet:-Supplying and fixing 20 amps, 240 volts,SPN industrial type, socket outlet, with 2 pole and and earth, metal enclosed plug top along with 20 amps 'c' series, SP MCCB, insheet steel enclosure,in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.• Total Quantity = 3 Nos. |
| 218 | S/F T.P.MCB DB:-Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) 4 way (4+12),Double door, Horizontal type• Total Quantity = 1 No. |
| 219 | Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)• Total Quantity = 2 Sets |
| 220 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 1'X1' led Panel light• Total Quantity = 2 Nos. |
| 221 | Supplying,installation,testing and commissioning of Wire less CCTV Cameras,including wiring and all other necessary accessories as required all complete job.• Total Quantity = 6 Nos. |
| 222 | Supply Installation,testing and commissioning of following size ceiling or side fan 3 blades confirming to IS: 374 :2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm FR PVC insulated copper wire suitable for 230 V 50Hz,single phase supply etc complete required. 1200 mm (48'') Ceiling or Side fan• Total Quantity = 10 Nos. |
| 223 | Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton• Total Quantity = 2 Nos. |
| 224 | S.I.T.C of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz,single phase supply etc. complete as required 20/22 W LED Tube light• Total Quantity = 15 Nos. |
| 225 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15/16 led Round Down light• Total Quantity = 45 Nos. |
| 226 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15 W COB based LED light with multiple beam angle (36 degree)• Total Quantity = 16 Nos. |
| 227 | S.I.T.C of following rating recess/surface mounted LED bulb suitable for 230 V 50 Hz single phase supply etc. complete as required.• Total Quantity = 15 Nos. |
| 228 | Poviding and fixing 3D brass letters for Logo signage.The height at top- 12'',at middle-9'' and at bottom-4'' .The minimum thickness of the letters is at top- 2'' at middle-1.5'' and at bottom-12mm finished and lighting at front Side of Emporium and all other necessary required all complete Job. (At Outside of the Emporium)• Signage Area: 1 No. × Length 1.20 m × Height 0.30 m = 0.360 Sqm |
| 229 | Particulars with Specification |
| 230 | Dismantling dressed stone work ahhlar face stone work,marble work or orecast concrete work manually and disposal of unserviceable material within 50 M lead and disposal of unservieable materials with all lead all complete as per directed by E/I• For Wooden Flooring: 1 No. × Length 4.47 m × Width 3.80 m = 16.986 SqmTotal Quantity = 16.986 Sqm |
| 231 | 38 mm thick wood block flooring first class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4 (1 cement :2 course sand :4 graded stone aggregate 10 mm nominal size) to be paod separately coated with a tjin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg/sqm,including fixing blocks in position after dipping in hot bitumen (blown type) up to hafl depth,planed.levelled smooth and finished complete.• Flooring Area: 1 No. × Length 4.47 m × Width 3.80 m = 16.986 SqmTotal Quantity = 16.986 Sqm |
| 232 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section,power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I. wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound,jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture's specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I but excluding the cost of painting with:• 12.5 mm thick tapered edge gypsum moisture resistant board• Measurement: 1 No. × Length 4.47 m × Width 3.80 m = 16.986 SqmTotal Quantity = 16.986 Sqm |
| 233 | Providing and fixing panelled or panelled and glazing in panelled or panelled and glazed shuttera for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) comforming to IS: 1328(a) For Kurta Reck: - Horizontal (Top): 1 No. × Length 3.05 m × Width 0.76 m = 2.318 Sqm - Horizontal Shelves: 2 Nos. × Length 3.05 m × Width 0.60 m = 3.660 Sqm - Horizontal Shelf: 1 No. × Length 1.50 m × Width 0.60 m = 0.900 Sqm - Vertical Ends: 2 Nos. × Length 0.67 m × Height 2.55 m = 3.417 Sqm - Vertical Divider: 1 No. × Length 0.60 m × Height 2.55 m = 1.530 Sqm - Back Panel: 1 No. × Length 3.05 m × Height 2.55 m = 7.777 Sqm - Shelves Sides: 5 Nos. × Length 3.05 m × Height 0.67 m = 10.218 Sqm - Bottom Panels: 5 Nos. × Length 0.60 m × Width 0.60 m = 1.800 Sqm - Sides: 20 Nos. × Length 0.60 m × Height 0.375 m = 4.500 Sqm - Flexible Ply for Design: 1 No. × Length 3.05 m × Height 0.225 m = 0.686 Sqm(b) For Docra Reck: - Horizontal (Top): 1 No. × Length 3.05 m × Width 0.76 m = 2.318 Sqm - Horizontal Shelves: 6 Nos. × Length 3.05 m × Width 0.60 m = 10.980 Sqm - Vertical Ends: 2 Nos. × Length 0.67 m × Height 2.55 m = 3.417 Sqm - Vertical Sub-dividers: 5 Nos. × Length 0.60 m × Height 1.82 m = 5.460 Sqm - Shelves Sides: 4 Nos. × Length 0.60 m × Height 0.76 m = 1.824 Sqm - Bottom Panels: 5 Nos. × Length 0.60 m × Width 0.60 m = 1.800 Sqm - Sides: 20 Nos. × Length 0.60 m × Height 0.375 m = 4.500 Sqm - Back Panel: 1 No. × Length 3.05 m × Height 2.55 m = 7.777 Sqm - Flexible Ply for Design: 1 No. × Length 3.05 m × Height 0.225 m = 0.686 Sqm(c) For Saree Reck: - Horizontal (Top): 1 No. × Length 3.05 m × Width 0.67 m = 2.410 Sqm - Horizontal Shelves: 3 Nos. × Length 3.05 m × Width 0.60 m = 5.490 Sqm - Vertical Ends: 2 Nos. × Length 0.67 m × Height 2.55 m = 3.417 Sqm - Flexible Ply for Design: 1 No. × Length 3.05 m × Height 0.225 m = 0.686 Sqm - Internal Shelves: 7 Nos. × Length 0.60 m × Height 0.66 m = 2.772 Sqm - Bottom Panels: 7 Nos. × Length 0.67 m × Width 0.60 m = 2.814 Sqm(d) For Cash Counter Table: - Front Facing: 1 No. × Length 1.57 m × Height 1.06 m = 1.664 Sqm - Both Outer Sides: 2 Nos. × Length 0.60 m × Height 1.06 m = 1.272 Sqm - Inside Partitions: 2 Nos. × Length 0.67 m × Height 1.06 m = 1.420 Sqm - Inner Horizontal Trays: 2 Nos. × Length 0.45 m × Width 0.60 m = 0.540 Sqm - Counter Top & Base: 2 Nos. × Length 1.57 m × Width 0.60 m = 1.884 Sqm - Rack Shutters: 2 Nos. × Length 0.60 m × Height 1.06 m = 1.272 SqmTotal Decorative Plywood Quantity = 101.211 Sqm |
| 234 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surfacs layer and reverse side adhesive bonding quality conforming to IS : 2045 Type S,including cost of adhesive of approved quality(a) For Kurta Reck (dual surfaces): - Horizontal (Top): 2 Nos. × Length 3.05 m × Width 0.76 m = 2.318 Sqm - Horizontal Shelves: 4 Nos. × Length 3.05 m × Width 0.60 m = 3.660 Sqm - Horizontal Shelf: 2 Nos. × Length 1.50 m × Width 0.60 m = 0.900 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.55 m = 6.834 Sqm - Vertical Divider: 2 Nos. × Length 0.60 m × Height 2.55 m = 3.060 Sqm - Back Face: 2 Nos. × Length 3.05 m × Height 2.55 m = 15.555 Sqm - Shelves Sides: 10 Nos. × Length 3.05 m × Height 0.67 m = 20.435 Sqm - Bottom Panels: 10 Nos. × Length 0.60 m × Width 0.60 m = 3.600 Sqm - Sides: 40 Nos. × Length 0.60 m × Height 0.375 m = 9.000 Sqm - Flexible Ply Design: 2 Nos. × Length 3.05 m × Height 0.225 m = 1.373 Sqm(b) For Docra Reck (dual surfaces): - Horizontal (Top): 2 Nos. × Length 3.05 m × Width 0.76 m = 4.636 Sqm - Horizontal Shelves: 12 Nos. × Length 3.05 m × Width 0.60 m = 21.960 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.55 m = 6.834 Sqm - Vertical Sub-dividers: 10 Nos. × Length 0.60 m × Height 1.82 m = 10.920 Sqm - Shelves Sides: 8 Nos. × Length 0.60 m × Height 0.76 m = 3.648 Sqm - Bottom Panels: 10 Nos. × Length 0.60 m × Width 0.60 m = 3.600 Sqm - Sides: 40 Nos. × Length 0.60 m × Height 0.375 m = 9.000 Sqm - Back Face: 2 Nos. × Length 3.05 m × Height 2.55 m = 15.555 Sqm - Flexible Ply Design: 2 Nos. × Length 3.05 m × Height 0.225 m = 1.373 Sqm(c) For Saree Reck (dual surfaces): - Horizontal (Top): 2 Nos. × Length 3.05 m × Width 0.67 m = 2.410 Sqm - Horizontal Shelves: 6 Nos. × Length 3.05 m × Width 0.60 m = 10.980 Sqm - Vertical Ends: 4 Nos. × Length 0.67 m × Height 2.55 m = 6.834 Sqm - Flexible Laminate: 2 Nos. × Length 3.05 m × Height 0.225 m = 1.373 Sqm - Shelves Faces: 14 Nos. × Length 0.60 m × Height 0.66 m = 5.544 Sqm - Bottom Panels: 14 Nos. × Length 0.67 m × Width 0.60 m = 5.628 Sqm(d) For Cash Counter Table (dual surfaces): - Front Face: 2 Nos. × Length 1.57 m × Height 1.06 m = 1.664 Sqm - Both Outer Sides: 4 Nos. × Length 0.60 m × Height 1.06 m = 2.544 Sqm - Inside Partitions: 4 Nos. × Length 0.67 m × Height 1.06 m = 2.841 Sqm - Inner Horizontal Trays: 4 Nos. × Length 0.45 m × Width 0.60 m = 1.080 Sqm - Top & Bottom Portion: 4 Nos. × Length 1.57 m × Width 0.60 m = 3.768 Sqm - Rack Shutters: 4 Nos. × Length 0.60 m × Height 1.06 m = 2.544 SqmTotal Decorative Laminate Quantity = 191.470 Sqm |
| 235 | Providing and fixing frameless Grey automatic (Sensor) Double leaf sliding glass door with all Complete job as per dierction of E/I (For Main Gate of Emporium) ( Size of Door is 5'-0''x8-0'') or as per requirement• 1 Set Complete = 1 No. |
| 236 | Providing and fixing machine mouled aluminium coverering of approved pattern and design,made out machine sut aluminium sheet and machine hoted for receiving dash fastener,cover exoension joints on vertical surfaces/ ceiling floors,the fixing on lpate dash fasteners of 8 mm dia and 75 mm long bolts including providing aluminium washers 2 mm thick and 15 mm dia,at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandeable plastic sleeves in holes etc. complete as per dierction of E/I (At out side of Emporium) Anodised aluminium sheet 2.5 mm thick (anodised transperent or dyed to required shade according to IS:1868 Minimum anodic coating of grade AC 15)• Side strips: 2 Nos. × Length 0.27 m × Height 2.40 m = 1.296 Sqm• Fascia strip: 1 No. × Length 4.40 m × Height 0.90 m = 3.960 Sqm• Total Area = 5.256 Sqm (57.02 Sft)Total Weight of Aluminium @ 0.80 Kg/Sft = 45.620 Kg |
| 237 | Poviding and fixing wall pices Jharkhand Map waterproof Vinlyl stricker paper poster size (24''x36''),high quality posters are printed from high resolusion image with self adhesive. and all other necessary required all complete Job.• 24 Nos. Posters Complete = 24 Nos. |
| 238 | Providing and fixing glazing in aluminium door,window,ventilator shutter and partitions etc. with EPDM/ rubber/neoprene gasket eyc. Complete as per the architectural drawing and the directions of E/I (Cost of aluminium snap beading shall be paid in basic item) With flot glass panes of 8 mm thicness ( weight less than 20 Kg/Sqm)• For Display Spaces (Large): 2 Nos. × Length 1.20 m × Height 2.40 m = 5.760 Sqm• For Display Spaces (Small): 2 Nos. × Length 0.76 m × Height 2.40 m = 3.648 SqmTotal Glazing Quantity = 5.760 Sqm |
| 239 | Poviding and fixing Dokra and other materials with wooden frame in for different states with painting and all other necessary required all complete Job.• 18 Nos. Art Frames Complete = 18 Nos. |
| 240 | Providing and fixing oxidised M.S hasp and staple (afety type) conforming to IS: 363 with necessary screws etc. complete 90.mm• Total Quantity = 40 Nos. |
| 241 | Providing and fixing aluminium sliding door bolts,ISI marked anolised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade,with nuts and screws etc.complete 300x16 mm• Total Quantity = 76 Nos. |
| 242 | Providing and fixing PTMT tower rail complete with brackets fixed to wooden cleat with C.P. Brass Screws with concealed fitting arranmement of approved quality ad colour. 600 mm long towel rail with total length of 495 mm,78mm wide and effective height of 88 mm,weight not less than 190 gms• Total Quantity = 12 Nos. |
| 243 | Distemper with oil bound washable distemper of approved brand and manufacture to give even shade:- New work ( two or more coats) over and including water thinnable priming coat with cement primer• Under False Ceiling: 1 No. × Length 4.45 m × Width 3.77 m = 16.777 SqmTotal Quantity = 16.777 Sqm |
| 244 | Providing one coat of wax polishing with mansion,waxpol or equivalent approved quality of wax polish over old or new wooden surface including cleaning the surface after removing dirt,scales,smokes,grease and sand papering,including cost of scaffolding and taxes all complete as per building specification abd direction of E/I• Total Area as per Decoration & Wooden items = 191.470 Sqm |
| 245 | Providing and fixing waterproof strickers featuring traditional soharai ethnic art styled for ladies and gents garments (Such as heat transfer prints like Kurtis and Sarees) with self adhesive with all complete job. ( At out side of Emporium)• Side strips: 2 Nos. × Length 0.27 m × Height 2.40 m = 1.296 Sqm• Upper strip: 1 No. × Length 4.45 m × Height 0.90 m = 4.005 SqmTotal Quantity = 5.301 Sqm |
| 246 | Providing and fixing 2nd class wood lipping/moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/nail on the edges of the Pre-laminated particle board as per direction of E/I• Lipping: 2 Nos. × Length 2.25 m = 2.250 Mtr• Beading in front of Reception Table: 1 No. × 65.00 m = 65.000 MtrTotal Quantity = 67.250 Mtr |
| 247 | Point Wiring in PVC conduit with piano type switch Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required. Group-B• Total Points = 20 Nos. |
| 248 | Power plug wiring in PVC coduit (2x4 Sq.mm) Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.• Total Outlets = 115 Nos. |
| 249 | Supplying and fixing of the following size of along with accessories in surface/ recess PVC including cutting the wall and making good the same in case recessed conduit as required.conduit:- 32mm |
| 250 | Supplying and fixing of the following size of along with accessories in surface/ recess PVC including cutting the wall and making good the same in case recessed conduit as required.conduit:- 40mm• Total Length = 25.000 Mtr. |
| 251 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amp,3 pin socket outlet• Total Quantity = 15 Nos. |
| 252 | Supplying and fixing Modular type Switch/scoket Supplying and fixing Modular type Switch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amp one way switch• Total Quantity = 4 Nos. |
| 253 | Supplying and fixing PVC/G.I Boxes Supplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 121mmx173mmx48mm deep (6''x8'')• Total Quantity = 4 Nos. |
| 254 | Supplying and fixing Batten holder: Supplying and fixing Batten/ angle holder including connection etc. as required.:• Total Quantity = 15 Nos. |
| 255 | Supply , installation, testing & Commissioning of ceiling suspended DX type 4-WAY CASSETTE AC units with air cooled condenser complete with 5 Star Inverter type scroll/rotary compressor ,condenser ,wiring & accessories . Indoor units shall be ceiling suspended type complete with evaporator ,fan, filter ,drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge , cordless remote controls. The unit shall be suitable for working at 240 ± 10% ,50 Hz,1 phase AC supply .The unit shall be designed to take care of minimum vertical head 5mt & horizontal length of 30 mt & necessary oil separator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per approved make, ) with necessary vibration isolation arrangement as per site condition etc.The Outdoor unit Compressor must be provided with 5 Year Warranty Period.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition. Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts.2.0TRREFRIGERANT PIPING Supply, fixing, testing and commissioning of interconnecting soft/hard drawn copper refrigerant pipe work of following outer diameter duly insulated with fire rated class'O' closed cell elastomeric nitrile rubber type tubular insulation (19mm/13mm thick) between indoor & outdoor units . All piping should be laid on Galvanized/Powder Coated tray supported by Galvanized M S Hangers & Clamps and all external piping shall run in covered cable trays. The rate includes all the items required to complete the piping work and nothing extra should be payable.Vaccumiazation & Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU.Civil Work such as wall hole making , wall chiseling ,refilling of chiseling part with mortar etc. as per site condition.6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr ,9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )-10mtr.Providing and fixing of cPVC drain water piping complete with fittings, flexible connection to IDU, necessary support as per specification and insulated with 6 mm thick fire rated class'O' closed cell elastomeric nitrile rubber insulation-6mtr COMMUNICATION CABLE BETWEEN INDOOR AND OUTDOOR,OUTDOOR UNIT AC STAND ,AC INSTALLATION CHARGES,VOLTAGE STABLIZER 5kvamake- v-guard,voltas ,microtekmake AC- Daikin ,LG,Hitachi,Carrier• Total Quantity = 1 No. |
| 256 | Supplying and fixing T.P. MCB DB Supplying and fixing following way,single pole and neutral sheet,MCB distribution board 240 volton surface/recess,complete with tinned copper busbar,neutral busbar,earth bar, din bar, detachable gland plate,interconnection,phoshatized and power painted including earthing etc. as required (But without MCB/ RCCB /Isolator) 2 way,single door• Total Quantity = 2 Nos. |
| 257 | Supplying and fixing Modular type electronic fan regulator:- Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.• Total Quantity = 1 No. |
| 258 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x1.5 sq.mm+1x1.5 sq.mm earth wire• Total Length = 45.000 Mtr. |
| 259 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 2x2.5 sq.mm+1x2.5 sq.mm earth wire• Total Length = 25.120 Mtr. |
| 260 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required. 4x10.0 sq mm+2x6.0 sq mm earth wire• Total Length = 65.000 Mtr. |
| 261 | 2.18S/F 20 amps SPN MCB industrial socket outlet:-Supplying and fixing 20 amps, 240 volts,SPN industrial type, socket outlet, with 2 pole and and earth, metal enclosed plug top along with 20 amps 'c' series, SP MCCB, insheet steel enclosure,in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.• Total Quantity = 1 No. |
| 262 | S/F T.P.MCB DB:-Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) 4 way (4+12),Double door, Horizontal type• Total Quantity = 1 No. |
| 263 | Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)• Total Quantity = 2 Sets |
| 264 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 1'X1' led Panel light• Total Quantity = 2 Nos. |
| 265 | Supplying,installation,testing and commissioning of Wire less CCTV Cameras,including wiring and all other necessary accessories as required all complete job.• Total Quantity = 4 Nos. |
| 266 | Supply Installation,testing and commissioning of following size ceiling or side fan 3 blades confirming to IS: 374 :2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm FR PVC insulated copper wire suitable for 230 V 50Hz,single phase supply etc complete required. 1200 mm (48'') Ceiling or Side fan• Total Quantity = 1 No. |
| 267 | Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton• Total Quantity = 2 Nos. |
| 268 | S.I.T.C of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz,single phase supply etc. complete as required 20/22 W LED Tube light• Total Quantity = 4 Nos. |
| 269 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15/16 led Round Down light• Total Quantity = 20 Nos. |
| 270 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required. 15 W COB based LED light with multiple beam angle (36 degree)• Total Quantity = 15 Nos. |
| 271 | S.I.T.C of following rating recess/surface mounted LED bulb suitable for 230 V 50 Hz single phase supply etc. complete as required.• Total Quantity = 10 Nos. |
| 272 | Poviding and fixing 3D brass letters for Logo signage.The height at top- 12'',at middle-9'' and at bottom-4'' .The minimum thickness of the letters is at top- 2'' at middle-1.5'' and at bottom-12mm finished and lighting at front Side of Emporium and all other necessary required all complete Job. (At Outside of the Emporium)• Signage Area: 1 No. × Length 1.20 m × Height 0.45 m = 0.540 Sqm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender