Tender For Renovation Of Main Building Of P.W.D I.B (Occupied By Sri Saryu Roy Honble Member Jharkhand Legislative Assembly) At Ag More, Doranda, Ranchi
Tender Value
82.02 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
4 days left
EMD
1.64 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Main Building Of P.W.D I.B (Occupied By Sri Saryu Roy Honble Member Jharkhand Legislative Assembly) At Ag More, Doranda, Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 4 | Providing 6mm thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 5 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I. |
| 6 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 7 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 8 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I. |
| 9 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including priming coat of exterior primer applied @ 0.90litre/10sqm)) |
| 10 | Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and C/W celetial windows openings, including wedge over all clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l |
| 11 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 12 | Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 13 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 14 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 15 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 16 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes. |
| 17 | 110mm diameter |
| 18 | Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion. |
| 19 | Bend 87.5° 110mm |
| 20 | Coupler 110mm dia |
| 21 | shoe(plain)110mm dia |
| 22 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete. |
| 23 | 110mm dia |
| 24 | Providing and fixing 6mm thick commercial ply as per drawing for plain lining /cladding with necessary screws including priming coat on unexposed surface. |
| 25 | Providing and fixing 12mm fire retardant ply wood conforming to IS:5509 as per drawing for plain lining /cladding with necessary screws including priming coat on unexposed surface. |
| 26 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality. 1.00 mm thick |
| 27 | Supply of Fevicol/ktcat/vamicol approved quality including all complete job as per direction of E/I. |
| 28 | Supply of Head carpenter including all complete job. |
| 29 | Supply of carpenter including all complete job. |
| 30 | Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete 250x10mm |
| 31 | Providing and fixing panic bar/ latch (Double point)fitted with a single body.Trim Latch & Lock on back side of the panic Latch of reputed brand and manufacture to be approved by the Engineer-in-charge.all complete. |
| 32 | Providing and fixing chromium plated brass 100mm mortice latch kand lock with 6 levers and a pair of lever handle of appproved quality with necessary screws etc complete |
| 33 | ProvProviding and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm) |
| 34 | Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling and dash fasteners to be paid for separately) |
| 35 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powdercoating 50 micron) |
| 36 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminiumtubular handle bar |
| 37 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to1000 mm), with double speed adjustment with necessary accessoriesand screws etc. complete. |
| 38 | Providing and fixing aluminium hanging floor door stopper,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc compelteTwin rubber stopper |
| 39 | Supply of stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50mm dia wire including all complete job as per direction of E/I. |
| 40 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thicness 0.50 mm (base metal of minimum o.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required. |
| 41 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns.using self driling/selftapping screws complete Flashing/Aprons(upto 600mm) |
| 42 | Providing and fixing precoated galvanised steel sheet roofing accessores of total coated thickness 0.50mm (base metal of miniumu 0.45mm thicknes with total coating lkthickness of 0.05mm)with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns.using self driling/selftapping screws complee Gutter (600mm over all girth) |
| 43 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws |
| 44 | Kiln seasoned selected class of sheesham wood |
| 45 | Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes |
| 46 | steel work welded in built up sections/framed work,including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings,frames,guard bar,ladder,railings,brackets ,gatesa and similar works. |
| 47 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all complete as per building specification and direction of E/I. |
| 48 | waterproofing for old land new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foollwing steps:- |
| 49 | a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials,labour,tools complete ponding test to be done after plugging all outlets and to be checked from soffit to indentify seepage,leakage.On indentification of seepage,cement grouting to be done with non shrink expanding admixture of sika India Pvt.Ltd/MYK schomberg/Dr.Fixit/Fosroc or equivalent.Providing and reparing of all conners and joints such as those between the parapet wall and the roof slab etc.shall be chamfered with 150mmx150mm fillet of mortar cement sand 1:4) admixed with acrylic polymer of sika/Fosroc/MYK schomberg/Dr.Fixit or equivalent.Before chamfering a prime coat shall be given with the using of arcylic polymer Reparing surface irregularities,damaged concretein base slab,dead cracks if any,with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement shurry including all materials,labour tools commplete. |
| 50 | (b)Ist coat-Applying Ist coat of two component acrylic modified ready to use flexible cementitious mataerials on surface saturated dry roof and in side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layer is still green,Ist coat should be applied @ 1.5kg/sqmt/coat.For the purpose of measurement the entire treated surface will be measured.- |
| 51 | (C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready use Flexible cementitious materials right angle to the Ist coat over the glass fibre laid surface,2nd coat should be applied @ 0.7kg/sqmt/coat .For the purpose of measurement the entire treated surface will be measured.After three days of drying the 2nd coat,The rain water outlets to be plugged and ponding test to be done for 48 hours to indentity seepage,leakage from soffit and if found necessary rectification to be deon as per satisfaction of E/C.The waterproof coating to be protected from damage before screed over it.Water proofing coating to be protected from damgae before screen over it.Water proofing Brand sika Topseal 109hi/Fosroc Brushbod RFX/Dr fixit pidiffin 2K/MYK Aquafin TG.Product performance chemical,Base part A,Acrylic copolymer,PartB-specially graded cementtitious powder Density 1.6 kg/1(,mixed density) at + 27°C-Tensile strength-2N/mm2 after 28 days(with Fibre cloth)(According to ASTM D 2370)Pullout Bond strength-2N/mm2(concrete failure)(According to ISO 4624)Slant shear Bond strength-4N/mm2(According toFIP 5.15) Elongation at Break-35# without Fibre cloth and 20% with Fibre cloth(According to ASTMD 2370) |
| 52 | (d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm /50mm PCC of M-20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in allernatepenels of 2mtx2mt keeping 6mm gap between the panel joint Integral water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete (paid separately for this items) All corners shall be chamfered with 150mm fillet.The rainwater outlets shall be just leveled with screed concrete to ensure smooth discharge of water-The peripheral gaps between Pvc pipe outlet and concerte surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika India pvvt.Ltd/MYK.schomberg/Dr.Fixit/Fosroc.For the pupose of measurment the entire treated surface will be measured; |
| 53 | (e) Groove of PCC surface should be filled with polysulphide sealant(paid separately)Brand-sika India Pvt Ltd/MYK schomberg/Dr.Fixit/Fosroc warrantly for five years. |
| 54 | Covering of treated surface with PCC-Providing 25mm thick cement M20(1;1.5:3) mainting slope in afternate 2mtx2mt penels with approved quality of stone chips of 20mm to 6mm sze graded and graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer with admixtue of interat water proofing and placing in position stacking curing taxes and royalty all complete as lper buildinglspecification and direction of E/I. panels that has been left should be casted next day .there should be 6mm gap between panels Brands sized plastticcoate plus MYK proof WP10,Fasruc complast x421 ic. Dr Fixit pidipoor LW |
| 55 | Providing and filling of 6mm thick Groove beetween 25mmPCC panels with polysulphide sealant (poring Grade) as per drawing and technical specification and direction of E/I with 18% GST) Brand sika polysulpide Fosroc thioflex 600, Dr.Fixit pidiseal PS(42P)MYK seal PS or Etrivlent. |
| 56 | Dismantling lime terracing upto av. 50mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 57 | Providing and fixing factory made kitchen cabinet shutter/partition 20mm nominal thickness of approved shade,quality and make ,madefrom rigid foam sheets(single xtruded)having density 600kg/cum and laminated on both side by laminate sheet/PVC foil lamination.TAahe exposed edges shall be sealed with PVC edge beading of same shade and colour.TAhe shutter shall be fire retardent having necessary screw holding capacity.shutter shall be fixed to frame using approved hinges with necessary stainless steel scraews.all commplete as per direction of E/I. |
| 58 | Providing and fiaxing magnetic catcher of approved quality in cuupboard/ward robe shutters,including fixing with necessary screws etc complete job. Triple strip vertical type. |
| 59 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc complete as per direction of E/I. |
| 60 | Providing and fxing stainless steel soft closing spring hinges at 0 degree hinges(hydraulic tyype) of approved make/brand to cupboard shutters wth full threaded steel screws including making necessary recess in board and finished etc complete as per direction of E/I. |
| 61 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500mm long with screews etc.complete as peer direction of E/I. |
| 62 | Providing and fixing ready made 304 grade stainless steel modular kitchen basket and accessories such as right angle basket(plain cuup & saucer,plant,partition,Bottle rack,Thali cutlery) kitchen utaensil basket,Dinner set basket,kitchen grain basket,Multipurpose basket as per site rrequirement including finishing(wherever required) and fittings the same shall be fixed with necessary stainless steel nuts & bolts,stainless steel screws&telescopic channel etc.as epr direction of E/I(for payment purpose only weight of stainless steel basket shall be considered exxcluding weight of all fixing accessoreis such as nuts,bolts,fasteners telecopic basket channels etc.payment of providing and fixing telescopic channel shall be paid separately |
| 63 | Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for kitchen platforms, vanity counters windows sills, facias and similar locations of required size approved shade,colour and , texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite Stone slab of colour black,chrry /Ruby red ,area of slab over 0.50sqmm |
| 64 | Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work |
| 65 | Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified tiles Matt/Antiskid finish including all complete.(size 600x600mm) |
| 66 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 67 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 68 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 69 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 70 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 71 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 72 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 73 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) |
| 74 | providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. |
| 75 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 76 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 77 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 78 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including paintingof fittings and brackets, cutting and making good the walls and floorswherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 79 | Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I. |
| 80 | Brick lead 8K.M(1K+7P) |
| 81 | sand lead 8K.M. |
| 82 | Stone Metal 20 km lead |
| 83 | local sand lead 3K.M |
| 84 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc encluding necessary nails,screws etc complete as per direction of E/I. |
| 85 | Supplying &fixing PRIDE Two way valve chrome plated Alloy steel 15 15 15 PRIDE(cp Bib cock 2 in 1) product Id: 5116877-46224966212 including all complete job . |
| 86 | Supplying & fixing Jaquar Towel Rail stainless steel(SS 304) 600mm CAN 1181N Jaquar) product Id: 5116877-95812522713,thickness of Ni-cr coating.Not less than service condition,number 2 of Table 3 of IS 1068/1993,Mateials-stainless steel(SS 304)Minimum thickness of pipe0.75mm,color steel,shape-open rectangle,Towel Ring inner Diameter N.A,nominal Diameer of pipe/Rod 18mm,length of Towel Rail(mm)600,Number of Mounting Bracket-1 including all complete job. |
| 87 | Providing jaquar Towel Ring stainless steel(ss 202) jaquar (Towel ring,square(AKkP 35721P),product id 5116877-4692558141,Type of fitting towel ring thickness of Ni cr kcoating,not less than kservice condition number 2 of Table 3 of IS 1068/1993,maaterials stainless steel(202) minium thickness of pipe 0.75mm ,color steel shape closed rectangle,twel ring inner Diameter NA.Nominal Diameter of pipe/rod 18mm |
| 88 | Supplying & Fixing jaquar Leaded Tin Bronze pillar Taps(JAQUAR 15MM),product id: 5116877-79233252883,MATERIALS OF bODY,bODY COMPONENTS,CAPSTAN hEAD AND LEADED tIN bRONZE WASHER,MATERIALSL OF SPINDLE,gLALND WASHER PLATE AND NUT,BRASS ROD(EXTRUDED AND ROLLED),)minimum finish Mass 650gm for 15mm,mnominal size pillar Tape,Anti splash Device fitted-yes,Nominal size(mm) 15,ISI marked-yes including all complete job. |
| 89 | Supplying k& fixing PRAYAG clamp support and holes with screws and Back support Rectangular Mirror prayag ( Cat noPTA-50(Mirror cabinet 622x422mm) product id 5116877-486102988701,Mirror shape Rectangular frame without Frame materials plastic fixing Arrangement oof mirror clamp support,Holes with screws,Back support special FeatureNA width for Rectangular,Diameter for Round,Edge fpr sqiare (omcje) 5/1-7.5 Height/length of Mirror for Rectanular/oval (inch) 5.1-7.5 thickness of mirroor (mm) 3.5-4 mirror shape Rectangular Frame without Frame materials plastic weight (kg) 3.5frame color NA corners of Mirror Edged Fixing Arrangement of mirror clamp support ,holes with screws,Back suppoort Fixing/Fastenig kit included Yes. |
| 90 | Supplying and fixing PRIDE BATHROOM Hand shower leaded Brass Grade DCB-2 OF IS1264/1997 PRIDE(CP Health Faucet) product Id: 5116877-8222644844,thickness of Ni-cr coating:not less than sercice condition Number 2 of Table 3 of IS 1068/1993 Types of shower:Hand shower materials leaded Brass Grade DCB 2 of IS 1264/1997,Inlet length of shower pipe(mm) 150mm shower Diameter/length(mm):100 including all complete job. |
| 91 | Supplying &Fixing JVIJAY waste Fiting for size 32mm for wash basin vijay (BRASS WASHBASIN COUPLING)product Id: 5116877-98475055076,materials of washte fitting Brass conforming to Grade 3 of IS 292/1961,Nominal size 32mm for washbasin. |
| 92 | Supplying & fixing Parry ware viterous china sinks/wash Basins other pattern and kRectangle Parrware,product Id: 5116877-5580405717) including all complete job. |
| 93 | Supplying and fixing of HINDWARE Box Rim Type European pattern Toilet seat,Product id:5116877-92860162985,conformity to Indian standard IS 2556(part-2) Lats colour of toilet seativory colour of plastic seat cover with Lidivory non corrosive non Rusting Hinges no anti siphonage vent Horn nopatter as per Is 2556 Part 2 pattern 2 with S-TrapFlushing Rim Type Box Rim Type including all compelte job. |
| 94 | Supplying & Fixing Jaquar 15mm wall Mounting combination Tap Assembly conforming to IS: 8931: Latest Jaquar (WALL MIXER),Product id: 5116877-36944563296,Type of Tap wall Mounting combination Tap Assembly conforming to IS: 8931: Latest Material of Taps/Stop valves copper alloy(Brass) as per table 1 of IS:8931,latest Nominal size of Taps/stop valves(mm)15 Finish of Taps colour Moulded plastic/Moulded plastic with chromium plating/powdered coating and as per IS requirements. |
| 95 | Add 18 % GST (in Basic Rate must fill 12) |
| 96 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender