Educational and Research Institute Local Bodies Closing in 6 days TDR #58514870

Tender For Annual Maintenance Of Water Supply And Sanitary Arrangements In Government Polytechnic College, Gandharvakottai

Issued by Local Bodies · Pudukkottai, Tamil Nadu
Tender Value
1.50 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
1500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pudukkottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Annual Maintenance Of Water Supply And Sanitary Arrangements In Government Polytechnic College, Gandharvakottai

BOQ

Name of Work:- Annual Maintenance of Water Supply and Sanitary Arrangements in Government Polytechnic College, Gandharvakottai
Sl. No. Item Description
1Towards the Charges for Labour Supplied by the Contractor to do maintenance of college building work such as clearing the scrub jungles, and dumping at for off places. Filling the pot holes in the approach road and also in low lying area. Uprooting the small plants on the exposed surface of the buildings, cleaning the water tanks fungus formation periodically to up keep clean water removing the dead leaves falling on the open terrace of the building and cleaning the blockage in the rain water down fall pipe and removing blockage in the toilet and urinals, cleaning debris and silt accumulation in the drainage lines and making free flow of water and all other works as per the instruction of the departmental officers to keep the campus neat and term condition in Govt. Polytechnic College , Gandharvakottai
2Plumber-I
3Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting, and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3(2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply - above ground level.
432 mm dia UPVC Pipe
525 mm dia UPVC Pipe
620 mm dia UPVC Pipe
7Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements etc., complete complying with standard specifications
832 mm dia UPVC Elbow
925 mm dia UPVC Elbow
1020 mm dia UPVC Elbow
1132 mm dia UPVC Tee
1225 mm dia UPVC Tee
1320 mm dia UPVC Tee
1432 x 25 mm dia UPVC Reducer
1525 x 20 mm dia UPVC Reducer
1632 x 25 mm dia UPVC Reducer Tee
1725 x 20 mm dia UPVC Reducer Tee
1832 x 25 mm dia UPVC Reducer Elbow
1925 x 20 mm dia UPVC Reducer Elbow
20Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
2132 mm dia GM Wheel valve
2225 mm dia GM Wheel valve
23Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
24Towards the charges for cleaning the sewer line of all Building in GPT campus and removing the sludge by flushing, clearing, splices and safely Conveyance of Waste water disposal point and removal of blockages in sewer line up The cost including the hire charges for materials, machineries, and transportation the sludge materials to disposal point etc,. complete. (6000 litre per load)
25Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
26Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
27Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
28Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
2975mm dia
30Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
3175mm PVC Elbow with Door
32SUB TOTAL
33GST @ 18 % Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58514870
AUTHORITY Local Bodies
TENDER VALUE 1.50 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Department Of Higher Education
Work Description Tender for Annual Maintenance Of Water Supply And Sanitary Arrangements In Government Polytechnic College, Gandharvakottai
Basic Detail
Tender No 11 / 2026 / Date 13.11.2026
Bidding Type Tender
Location
City Pudukkottai
State Tamil Nadu
Key Dates
Publish Date 13 Nov 2026
Submission Date 27 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 1.50 Lakhs
Tender Fee Ref. Documents
EMD 1500
Exemption Not Available
Document List
b85ecc38-3756-49ca-be70-57fcaadd5338.html
BOQ_871701.xls
TenderCondition.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

b85ecc38-3756-49ca-be70-57fcaadd5338.html

xls

BOQ_871701.xls

pdf

TenderCondition.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender