Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58514667

Tender For special Repair Of Roof Treatment Bldg No P-100 In 4/3 Gr And Other Sanction Works Under Ge (South) Udhampur

Issued by Statutory Bodies & Commissions/Committees · Reasi, Jammu and Kashmir
Tender Value
41.10 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for special Repair Of Roof Treatment Bldg No P-100 In 4/3 Gr And Other Sanction Works Under Ge (South) Udhampur

BOQ

Name of Work:- SPL REPAIR OF ROOF TREATMENT BLDG NO P-100 IN 4/3 GR AND OTHER SANCTION WORKS UNDER GE (SOUTH) UDHAMPUR
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL REPAIR OF ROOF TREATMENT BLDG NO P-100 IN 4/3 GR AND OTHER SANCTION WORKS UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)- 116/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words
2Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-charge.
3Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation and getting out in any type of soil complete, all as specified and directed by Engr-in-charge
4Excavation over areas n. exc. 1.5, deep and getting out in any type of soil all as specified and directed by Engr-in-charge
5Excavation over areas exc. 1.5,but nexc 3m deep and getting out in any type of soil all as specified and directed by Engr-in-charge
6Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete in including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size.1.2M dia X 3.00M effective depth. Drg No:-CEUZ-1202/2003 all as specified and directed by Engr-in-charge
7Returning, filling in any type of soil, including spreading, leveling , watering and well ramming in layers not exceeding 25 cm. complete all as specified and directed by Engr-in-charge
8Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point completed all as specified and directed by Engr-in-charge
9Dismantling of birck tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-charge
10Dismantling water tanks and removing to store exc 1000 & n.exc 2000 ltrs of capacity. all as specified and directed by Engr-in-charge
11Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) all as specified and directed by Engr-in-charge
12Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge
13Demolition of brick work built in cement mortar all as specified and directed by Engr-in-charge.
14Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed by Engr-in-charge.
15Providing cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed by Engr-in-charge
16Brick work with Sub Class ‘B’ burnt bricks (Old size bricks) straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6. completed, all as specified and directed by Engr-in-charge
17All as per item no.15 but except bricks
18Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge
19Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge
20Reinforce cement concrete M-25 (20mm graded aggregates) design mix columns, pillars, piers,posts and struts complete aall as specified and directed by Engr-in-charge
21Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span all as specified and directed by Engr-in-charge
22Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge
23M&L For Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in chajjas complete all as specified and directed by Engr-in-charge
24Formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete, complete all as specified and directed by Engr-in-charge
25Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete,complete all as specified and directed by Engr-in-charge
26Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough flat finished surface of concrete, complete all as specified and directed by Engr-in-charge
27Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and directed by Engr-in-charge
28Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge
29Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed by Engr-in-charge
30M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge
31All as per srl item No 29 above but 6 mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified and directed by Engr-in-charge
32M&L for 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge
33M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound all as specified and directed by Engr-in-charge (WPC shall be measured separtely).
34Rendering 20 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in CM 1:4 and second coat to be applied with WPC and recrone polyster fibre including fair finishing (WPC will be measured and paid separately) all as specified and directed by Engr-in-charge
35Supply only Liquid water proofing compound all as specified and directed by Engr-in-charge
36Material and labour for 5 mm thick rendering in CM 1:3 on concrete ceiling surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.
37M&L for 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed by Engr-in-charge
38M&L for preparation of new plastered surfaces on walls and applying three coats of white wash.complete all as specified and directed by Engr-in-charge
39M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash.complete all as specified and directed by Engr-in-charge.
40Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.
41M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-charge.
42M&L 100 mm thick cement concrete (1:4:8) type D2 as sub base to floor all as specified and directed by Engr-in-charge.
43M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and directed by Engr-in-charge.
44M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed by Engr-in-charge.
45M&L for Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,complete all as specified and directed by Engr-in-charge.
46M&L for Glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed by Engr-in-charge.
47M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
48Surface excavation not exc 30 cm deep and averaging 15cm and getting in any type of soil complete all as specified and directed by Engr-in-charge.
49M&L for 50 mm thick cement concrete 1:2:4 type B-2 using 40 5mm graded crushed stone aggregates as in Roof Top and finished even applied with WPC and fair complete all as specified and directed by Engr-in-charge.
50M&L for 75mm thick Plain cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete all as specified and directed by Engr-in-charge.
51M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed by Engr-in-charge.
52S& F coloured machine vibro mechenically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge ISI Marked all as specified and directed by Engr-in-charge.
53M & L for cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in surface channels and drains complete all as specified and directed by Engr-in-charge.
54M&L for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in benching, haunching of man holes,in surface channels and drains. complete all as specified and directed by Engr-in-charge.
55M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, incl forms moulds, mitered/stopped ends etc complete all as specified and directed by Engr-in-charge.
56S&F for mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.
57Mild steel framed work such as grills, gratings,etc, with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bar ; barred iron doors, ladder ; framed balusters ; railing ; frame work for water tanks and similar work conforming to Fe-410,Gde-E-310, complete all as specified and directed by Engr-in-charge.
58Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm all as specified and directed by Engr-in-charge.
59S&F solid PVC door frame moulded of size 50mm x 47mm made out of 5mm but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed by Engr-in-charge.
60S&F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specification and drawing all as specified and directed by Engr-in-charge.
61Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.
62S&F stainless steel handles cast type, anodised, 150 mm size complete all as specified and directed by Engr-in-charge.
63S&F stainless steel anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed by Engr-in-charge.
64S&F stainless steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed by Engr-in-charge.
65M&L for 10 mm thick rendering in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified.Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item all as specified and directed by Engr-in-charge.
66Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.
67S&F for steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed by Engr-in-charge.
68S&F for steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed by Engr-in-charge.
69Re-fixing 15 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors etc,.) of following sizes :-
70Re-fixing 15 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors etc,.) of following sizes :-
71Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified of the following description :-
72Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified of the following description :-
73M&L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge.
74M&L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge.
75S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
76S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
77Rotational molded (triple layered white coloured as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres complete all as specified and directed by Engr-in-Charge. Make - Sintex/Vectus.
78S&F PVC (SWR) 'P' Trap for110mm bore pipe all as specified and directed by Engr-in-charge.
79S&F water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified and directed by Engr-in-charge.
80S&F in Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with PVC ‘P ’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete aall as specified and directed by Engr-in-charge.
81S & F plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engr-in-charge.
82S&F Health faucet (ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook with all accessories all as approved and fixed as in repairs complete all all as specified and directed by Engr-in-charge.
83S&F SS tubular towel rail, 20mm dia, D type, 60cm long between flanges , fixed with rawl plugs. complete all as specified in repairs. (ISI Mark) all as specified and directed by Engr-in-charge.
84S&F for 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in-charge. Make : CERA or equivalent
85Supply Only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed by Engr-in-charge.
86S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed by Engr-in-charge.
87S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. all as specified and directed by Engr-in-charge. (Minimum weight 105gms)
88S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge.(Minimum weight 90gms)
89S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed by Engr-in-charge.
90S&F for PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engr-in-charge.
91S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed by Engr-in-charge.
92S&F, 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-charge.
93S&F 15mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe all as specified and directed by Engr-in-charge.(Make Johnson /Cera or equivalent )
94S&F 32mm dia waste coupling of PTMT(half or full threaded) (Minimum weight 32mm ,45gms), completed all as specified and directed by Engr-in-charge.
95Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charge.
96S&F SS grating 100mm dia fixed to floor trap in repair all as specified and directed by Engr-in-charge.
97S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed by Engr-in-charge.
98S&F stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe complete all as specified and directed by Engr-in-charge.
99M&L Granite ( of any type ) work 20mm thick (table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade.(shade and type as approved by Engr -in -charge)
100Supply and fix in vitreous china wash hand basin white table top size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.
101S&F for PVC (SWR) floor trap with dia of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and directed by Engr-in-charge.
102S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed by Engr-in-charge.
103S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed by Engr-in-charge.
104S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed by Engr-in-charge.
105S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls all as specified and directed by Engr-in-charge.
106S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) bend any radius for 110mm bore pipe all as specified and directed by Engr-in-charge.
107S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) bend any radius for 75mm bore pipe all as specified and directed by Engr-in-charge.
108S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed by Engr-in-charge.
109S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed by Engr-in-charge.
110S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) reducers for75mm bore pipe all as specified and directed by Engr-in-charge.
111S&F for 75 mm PVC (SWR) vent cowl all as specified and directed by Engr-in-charge.
112S & F in repairs 600 mm x 450 mm mirror of 5 mm thick selected quality glass, mounted on 6 mm thick commercial plywood with aluminium frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-charge.
113S&F for 150 / 200mm Reinforced concrete pipes, class NP-2, laid and jointed complete with collars complete all as specified and directed by Engr-in-charge.
114M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed by Engr-in-charge.
115Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel of 150mm internal dia of pipe (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all as specified and directed by Engr-in-charge.
116Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge.
117Providing cement concrete 1:2:4 type B0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed by Engr-in-charge.
118Roughing surfaces of old conc surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm including 10mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound all as specified and directed by Engr-in-charge.
119M&L Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and Prvide modified polymeric five layered APP (Atactic Polypropylene ) Modified Polymeric Membrane with 100 micron high molecular high density Polythlene film. Min wt of membrane will be 3.50 kg/sqm and bonded completely to the surfaces with overlap of 15 cms and side lap 75 mm (overlaps to be thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 kg/ sqm and applying aluminium Paint all as specified and directed by Engr-in-charge.
120(i) M&L for preparation of surface by scrapping and properly cleaning the existing roof treatment in any number of layers up to original RCC roof top surface. Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm all as specified and directed by Engr-in-charge. (ii)M&L for 10mm thick cement rendering in CM 1:3 and finishing the surface even and smooth before application of priming coat complete, all as specified and directed by Engr-in-charge.
121M&L for RCC Type B0 1:2:4 (12.5mm graded aggregate) for wall, retaining wall, ballast walls above top of footing; including attached pilaster and buttress all as specified and directed by Engr-in-charge.
122Use and waste of Formwork to soffits of suspendedslabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) all as specified and directed by Engr-in-charge.
123Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-charge.
124M & L for Stone kerb of roughly squared stones of size 20cm x 30cm,dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar1:6 and struckflushall as specified and directed by Engr-in-charge.
125Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as specified and directed by Engr-in-charge.
126All as per item no 124 above but cable 2.5 sqmm FRLSH for one 5 pin 5 Amp socket outlet point on an independent board.
127All as per Srl item No 124 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. (inclusive Geyser)
128S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge.
129S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge.
130S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge.
131S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.
132M &L Ceiling rose, surface bakelite 65x 50mm two to two terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.
133S&F Sheet metal enclosure double door type for DBs 8 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
134S & F of MCB single pole 240 volt any rating from 06 to 32 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engr-in-charge.
135S & F of MCB single pole and neutral 240 volt any rating upto 63 Amp \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engr-in-charge.
136Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
137S&F in repairs LED tube light fitting Garnet 10W Batten LED, with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting all as specified and directed by Engr-in-charge.
138Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection and all as specified and direceted by Engr-in-charge.
139Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed by Engr-in-charge.
140Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size all as specified and directed by Engr-in-charge including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately. Make: Havells/ Finolex/ Polycab.
141S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58514667
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 41.10 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair Of Roof Treatment Bldg No P-100 In 4/3 Gr And Other Sanction Works Under Ge (South) Udhampur
Basic Detail
Tender No GE/S(U)-116/2026-27
Bidding Type Tender
Location
City Reasi
State Jammu and Kashmir
Key Dates
Publish Date 13 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 41.10 Lakhs
Tender Fee 500
EMD 82000
Exemption Not Available
Document List
674bb300-1ca5-4ebd-a43e-1df48de9abaa.html
BOQ_895830.xls
tender116.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

674bb300-1ca5-4ebd-a43e-1df48de9abaa.html

xls

BOQ_895830.xls

pdf

tender116.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender