Tender For Provn Of 2 X Sets Of 6 Cubical Showers In Manekshaw Centre Line Area And Certain Other Minor Works Under Ge (South) Delhi Cantt-10.
Tender Value
16.50 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
19 days left
EMD
33000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 2 X Sets Of 6 Cubical Showers In Manekshaw Centre Line Area And Certain Other Minor Works Under Ge (South) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 2 | M&L for 75 mm thick cement concrete (1:4:8) Type D-2, (40 mm graded crushed stone aggregate), as in sub-base of floor and similar works complete all as specified and as directed. |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavation in any kind of soil and disposal of surplus excavated soils as directed, within a lead of 50 m. complete all as directed. |
| 4 | Removing excavated material(soil) not exceeding 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm (soft / loose soil ) complete all as specified and as directed. |
| 6 | M&L for Cement concrete 1:4:8 Type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 7 | M & L for TMT bars 10 mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips grade fe 550/500D, complete all as specified and as directed. |
| 8 | All as per srl item No 7.00 here-in-before but 8 mm dia as in stirrups. |
| 9 | M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter finsihed fairs surfaces of concerete complete all as specified and as directed. |
| 10 | M&L for Reinforced cement concrete M-25 (Design Mix) using 12.5 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed. |
| 11 | M & L for steel formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beamsfor rough finished surfaces of concrete, complete all as specified & directed. |
| 12 | M&L for providing reinforcement cement concrete M-25 (Design Mix) using 12.5 mm graded crushed stone aggregate as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed. |
| 13 | M&L for reinforced cement concrete M-25 (Design Mix) using 12.5 mm graded crushed stone aggregate as in columns and pillars etc complete all as specified and as directed. |
| 14 | M&L for steel form work to sides of pillars, posts, structs, columns etc. for rough finished surfaces of concrete, complete all as specified & directed. |
| 15 | M&L for old size brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specifie and as directed. |
| 16 | M & L for half brick thick brick work with sub class B old size burnt bricks straight or curved on plan to any radius in walls built in cement mortar 1:4 complete all as specifie and as directed. |
| 17 | M&L for rendering 15 mm thick with ready mix plaster on brick work surface other then fair faces surfaces finished even and smooth without using extra cement including scaffolding arrangement to carry out the work complete all as specified & directed. |
| 18 | M&L for rendering 10 mm thick with ready mix plaster on fair faces of brick work finished even and smooth without using extra cement complete all as specified & directed. |
| 19 | Supply only intergal water proofing compound complete all as specified and as directed. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over one coat of primer complete all as specified and directed by engineer in charge. |
| 21 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified and as directed. |
| 22 | Supplying and fixing of 25 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Brass threaded elbow, Tee, Male Female adaptor etc) SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 23 | Supplying and fixing of 20 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Brass threaded elbow, Tee, Male Female adaptor etc) SDR 11 fittings on walls/ceiling or laying in floors,complete all as specified and as directed. |
| 24 | S&F Brass CP wall mixer (3 in 1) 15mm dia for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 25 | S&F in repairs PVC multi floor trap with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed. |
| 26 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 27 | S&F Brass chromium plated shower rose 125 mm size including shower arm complete all as specified and as directed. |
| 28 | S&F 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board including aluminum beading complete all as directed. |
| 29 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 30 | M&L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10 mm thick backing coat of cement mortar 1:4, complete all as specified and as directed. |
| 31 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/ wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note:- For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 33 | S & F 150 mm aluminium D type handles, cast type, anodised complete all as specified and as directed. |
| 34 | S & F 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 35 | S & F butt hinges 100 mm type B-21 extruded section and fixed complete all as specified and as directed. |
| 36 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 37 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 38 | S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 39 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 40 | S&F of rotationally moulded HDPE water storage tanks of 1,000-litre capacity, cylindrical vertical type with closed top, hoisted and fixed in position, complete, including high-pressure brass valve with polythene float and fly nut, tank nipple as required, screwed for iron pipe or brass ferrule of 25 mm bore, and all associated fittings, complete in all respects as specified in SSR Part I and as directed. |
| 41 | S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 42 | S&F of anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 43 | S&F of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) complete all as specified and as directed. |
| 44 | S&F of 4 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 45 | S&F of factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in-Charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge.Note: M.S (mild steel) framework with priming coat shall be paid separately. |
| 46 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed. |
| 47 | M&L for Cement concrete 1:3:6 Type C-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete complete all as specified and as directed. |
| 48 | M&L for Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete alll as specified and as directed. |
| 49 | M&L for Cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades,shelves,lintel,etc and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete alll as specified and as directed. |
| 50 | M&L for mild steel rolled sections work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Confirming (Fe-410- W(Gde- E-250) quality- B complete all as specified and as directed. |
| 51 | M&L for steel work in tubular trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and as directed. |
| 52 | M&L for mild steel rolled sections work as in doors, gates of angle section gusset plates complete drilled or welded to be prepared for hangng or sliding with including either hooks and hinges confirming (Fe-410- W(Gde- E-250) quality- B complete all as specified and as directed. |
| 53 | S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete alll as specified and as directed. |
| 54 | S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete alll as specified and as directed. |
| 55 | S&F of 4 mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. |
| 56 | M&L for preparation of new steel surface of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of zinc chrome red oxide complete all as specified and as directed. |
| 57 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width ofaperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 58 | M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) .Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. |
| 59 | All as per srl item No 58.00 here-in-before but 5 Amp socket outlet on same board. |
| 60 | All as per srl item No 58.00 here-in-before but One socket outlet 5 Amps on independent board. |
| 61 | All as per srl item No 58.00 here-in-before but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete. |
| 62 | S&F of switch modular type, 1 way 6A, 1 module, IP 20 protection, complete all as specified and as directed. |
| 63 | S&F of Modular Socket, 6A - 2/3 pin 2 module, IP 20 protection, complete all as specified and as directed. |
| 64 | S&F of switch modular type 1way 16A, 1module with indicator, IP 20 protection, complete all as specified and as directed. |
| 65 | S&F of Socket 6A/16A - 2/3 pin combined, IP 20 protection, complete all as specified and as directed. |
| 66 | S&F of MCB SP 6 to 32 Amps 240 Volts, 10kA, `C' curve all as per site requirement complete all as specified and as directed. |
| 67 | S&F of MCB SPN 40 Amps 'C' series, breaking capacity 10 kA, 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed. |
| 68 | S&F of sheet-steel enclosure, double-door type, suitable for distribution board (DB) accommodating MCBs, SPN, 12-way, 240 V AC, complete with 200 A rated busbar, degree of protection IP43 and mechanical impact protection IK09, including hinged outer door, inner cover, neutral link, earth terminal, cable entry provisions, mounting arrangement, necessary hardware, screws and accessories, complete in all respects, as specified and as directed. |
| 69 | S&F of wall-mounted LED integrated batten, 10 Watt, 2 ft length, white colour, with polycarbonate housing, colour rendering index (CRI) not less than 80, luminous efficacy 120 lumens per watt, correlated colour temperature (CCT) 6500 K (cool white) and power factor not less than 0.90, suitable for indoor use, complete with integral LED driver, mounting accessories, electrical connections and all necessary fittings, complete in all respects, as specified and as directed. |
| 70 | S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and as directed. |
| 71 | Supply and fixing of LED street light fitting, 35 Watt, 230 V AC, outdoor type, complete with high-pressure die-cast aluminium housing, heat-resistant construction, LED driver, lamp bracket and impact- and corrosion-resistant finish, incorporating suitable thermal management and multiple-optic light distribution system, with IP 65/IP 66 protection, fixed with suitable GI bracket, including clamps, nuts, bolts and washers, and connection with 3-core PVC-insulated, overall-sheathed flexible copper cable of size not less than 1.0 sq mm, including all accessories, connections and incidental materials, complete in all respects, as specified and as directed. |
| 72 | M&L for Sub Main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 2 runs of 6 Sqmm for phase and neutral and 1 run of 6 Sqmm for earth wire drawn through concealed PVC conduit wiring in wall not less than 25mm dia with all fittings like tees, bends, junction/ terminal boxes etc as per site requirement complete all as specified and as directed. Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. 2 runs of cable for phase/ neutral and 1 run for earth will be measured and paid as one unit length. |
| 73 | Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 16 sqmm, 4 core complete all as specified and as directed. |
| 74 | Supply and fix of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed 25 mm dia complete all as specified and directed. |
| 75 | Supply and fixing GI Pipe light grade with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete for protection of cable of size 25 mm dia bore complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender