Tender For Dismantle Of Old Ahu Cooling Coils And Installation Of New Ahu Cooling Coils ( Ahu Cooling Coil Shall Be Supplied By Iuac) Including Attached Technical Specifications, Scope Of Work And Boq
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
9000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantle Of Old Ahu Cooling Coils And Installation Of New Ahu Cooling Coils ( Ahu Cooling Coil Shall Be Supplied By Iuac) Including Attached Technical Specifications, Scope Of Work And Boq
BOQ
| Sl. No. | Item Description |
| 1 | Bill of Quantity (BOQ) Annexure – G S.No. Description of Items ( The quoted price shall include DSITC of all the items mentioned below and detailed Scope of Work and Technical Specifications, NIT) Qty. UnitPrice TotalCost |
| 2 | Dismantle of old and replacement by installation of new AHU Cooling Coils ( AHU cooling coils will be provided by IUAC) as per attached scope of works and details as per following : 1.1 AHU- Sub Station : Fins Length-48”, Filns Height-47”, Fins depth-6.5”. Header-2.5” |
| 3 | AHU- HCI : Fins Length-96”, Fins Height-60”, Fins depth -6.5”, Header-4” |
| 4 | AHU-2/PH-2 : Fins Length-70”, Fins Height-48”, Fins depth -6.5”, Header-3” |
| 5 | Fabrication only (MS pipe only will be provided by IUAC) including bends, reducers, supports by MS electrode arc welding of following pipe sizes:4” NB |
| 6 | 3” NB |
| 7 | 2” NB |
| 8 | Supply and fixing of Flanges by welding of SORF, BS-10, Table – F, 150 lb (including gaskets, nuts, bolts, washers) of following sizes :4” NB |
| 9 | 3” NB |
| 10 | 2” NB |
| 11 | 1.5” NB |
| 12 | Providing and fixing of 4” NB, Butterfly valve, PN-16, S.S. Disc, S.S.pin, after cutting in existing insulated pipe line. |
| 13 | Supply and fixing (by screws) of G.I. Sheet, 22 G thick, Blank off around 4 nos of above AHU cooling coil for stopping of bypass of air. |
| 14 | Thermal Insulation by providing and fixing of 2” thick EPS of density 28 kg/cum, CPRX coating on MS pipe (size-2.5”-4” NB as above, flanges, butterfly valves) and inside of EPS section, 18 G wire lacing at a distance of 500 mm, 250 micron thick polythene sheet with 2” overlapp on joints, and aluminum cladding of 24 G with 2” overlapp on joints.Pipe Size - 4”NB |
| 15 | Pipe Size - 3”NB |
| 16 | Pipe Size - 2”NB |
| 17 | Butterfly Valves – 4” NB |
| 18 | Butterfly valves – 2” NB |
| 19 | Balance Valve / 3 way valve – 2” NB |
| 20 | Dismantle and refixing of ( fabrication and labour work only) , Insulated MS Pipe-2” NB ( dismantle rate only, refixing rate is in quoted item – 3.3) |
| 21 | Butterfly valves, Size: 2” NB |
| 22 | Balancing valve, Size – 2” NB |
| 23 | 3-way valve, Size: 2” NB |
| 24 | Industrial Glass thermometer of 0-60 degree C. with MS heavy long threaded Socket and brass Thermowell suitable for installation on M.S. Pipe line. |
| 25 | Pressure Gauge 6\\" Dial, 0-7 kg/cm2. with threaded S.S. Socket, S.S. Ball Valve (Shenco), S.S. U-tube, M.S. Heavy long threaded Socket welded on pipe etc. |
| 26 | Supply and fixing of AHU cooling Coil support (4 Nos) HDG ( Hot deep Galvanised ) Channel – 100 x 50 x 7.5 |
| 27 | Buy back offer of AHU cooling coils as following:10.1 - AHU- Sub Station : Fin Length-48”, Fins Height-47”, Fins depth-6.5”, Rows-6, Circuits-38 nos, Header-2.5”, Tube dia : 1/2” |
| 28 | AHU- HCI : Fins Length-96”, Fins Height-60”, Fins depth -6.5”, Rows-6, Circuits-48 nos, Header-4”, Tube dia : 1/2” |
| 29 | AHU-2/PH-2 : Fins Length-70”, Fins Height-48”, Fins depth -6.5”, Rows-6, Circuits-38 nos, Header-3”, Tube dia. : 1/2” |
| 30 | Buy back offer for M.S. Scap |
| 31 | Disposal of malba ( insulation, cement etc) out of the site. |
| 32 | Total ( Excluding GST) |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender