Educational and Research Institute Boards / Undertakings / PSU Closing in 3 days TDR #58514546

Tender For Providing And Fixing Blinds, Stainless Steel Sink & Construction Of Granite Countertop Along With Other Allied Civil Works In Room No. 510, 5Th Floor, Advanced Eye Centre, Pgimer, Chandigarh.

Issued by Boards / Undertakings / PSU · Chandigarh, Chandigarh
Tender Value
1.86 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
3720
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Providing And Fixing Blinds, Stainless Steel Sink & Construction Of Granite Countertop Along With Other Allied Civil Works In Room No. 510, 5Th Floor, Advanced Eye Centre, Pgimer, Chandigarh.

BOQ

Name of Work:- Providing and fixing Blinds, Stainless Steel sink & construction of granite countertop along with other allied civil works in Room no. 510, 5th floor, Advanced Eye Centre, PGIMER, Chandigarh.
Sl. No. Item Description
1Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
2Centring and shuttering including strutting, propping etc. and removal of form for :
3Shelves (Cast in situ)
4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
5Thermo-Mechanically Treated bars
6Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
7Cement mortar 1:4 (1 cement :4 coarse sand)
8Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
9Granite stone slab of colour black, Cherry/Ruby red
10Area of slab over 0.50 sqm
11Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete
12Canteen inside
1312 mm cement plaster of mix :
141:6 (1 cement: 6 fine sand)
15Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade
16Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
17Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
18Float/tinted glass panes of nominal thickness 5 mm (weight not less than 12.5 kg/sqm)
19Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
20For thickness of tiles 10 mm to 25 mm
21Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
22Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
2315 mm dia. nominal bore
24Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
2515 mm nominal bore
26Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
2715 mm nominal bore
28Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
2915mm nominal bore
30P/F C.P. grating 100 nominal dia
31Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless-steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
32Kitchen sink with drain board
33510x1040 mm bowl depth 250 mm
34Providing and Fixing Blinds, Hardware Specification Roller Tube: Made up of High Strength Anodized Aluminium Alloy Extruded grooved tube. Size:40mm outside diameter, weight = 220gms/running recontrol Unit with Clutch Mechanism: The control unit is made of high strength reinforced plastic. The clutch is of warp spring design. High carbon steel springs are provided to transmit motion from the driven mechanism Clutch is operated directionally by the use of beaded endless chain to raise and lower the blind smoothly to decide height. Idler: Idler is of high strength reinforced plastic, consisting of an outside sleeve and centre shaft. Sleeve provide bearing surface for centre shak and rotate freely, providing smooth, quiet and long wearing operation. Round Type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, White is powder coated in white. Size: 14mm outside dia.; weigh: =220gms/running mtr Triangle type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, which s powder coated in white Size: 15x24x24mm; Weight 230 gms/running mtr. Valance Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated in White. Size: 84.5 mm Width; weight 320gms/running mtr. Ceiling Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated in White. Size: 75.6X12mm, weight - 480gms/running mtr. Installation Bracket: lt is made up of mild steel with white powder coating having thickness of 1.8 mm.it is used for mounting control unit & idler. Ceiling Bracket: lt is made up of mild steel with white powder coating having thickness of 1.0 mm. t issued to fix the blind to the wall or ceiling. Operating chain: This is made of 4.5 mm plastic beads molded on 2.0 mm thick polyester cord. The pitch of the beads is 6mm.
35The chain drives the sprocI‹et fixed in the end control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation. End Cap: End cap for triangular bottom rail, round bottom rail, Ceiling rail and valance are made up of high strength moulded plastic in white colour. Fabric: Technical Data, FR Grade (NFPA 701 :2015) 100 % polyester, Fabric Width 280 Cm, Weight 112 GSM +-5% Thickness 0.30 mm+_5%Fabric Repeat size Soild 7.5 cm + s % Mesh 5 CM + 5 %.
36Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
37Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
38Flexible pipe
3932 mm dia
40Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
41Rectangular shape 1500x450 mm
42Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
43Kiln seasoned and chemically treated hollock wood
44Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
4525 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
46Providing and fixing Ist quality ceramic glazed digital wall tiles of size not less than 300x 300 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting
47Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
481:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
49Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
50Size of Tile 600x600 mm (Anti skid/matt finish)
51Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete.
52Size of Tile 600x600 mm
53add water charges @ 0.5%
54The Total value of Schedule4 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58514546
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.86 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Post Graduate Institute Of Medical Education And Research
Work Description Tender for Providing And Fixing Blinds, Stainless Steel Sink & Construction Of Granite Countertop Along With Other Allied Civil Works In Room No. 510, 5Th Floor, Advanced Eye Centre, Pgimer, Chandigarh.
Basic Detail
Tender No PGI/Engg/AE-II/2026/46
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 13 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 1.86 Lakhs
Tender Fee Ref. Documents
EMD 3720
Exemption Available
Document List
BOQ_981779.xls
ea448d92-54f7-4e34-a312-98282515a638.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_981779.xls

html

ea448d92-54f7-4e34-a312-98282515a638.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender