Road Transport and Highways Government Departments Closing in 25 days TDR #58514542

Tender For Short Term Maintenance Contract (Stmc) Work From Km.113.710 To Km.130.600 Of Nh-73 (Manglore-Tumkur Section) And From Km 0.00 To Km.26.847 Of Nh-173, (Mudigere-Kadur Section) Pertaining To The Executive Engineer, National Highway Division,

Issued by Government Departments · Chikkamagaluru, Karnataka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Dec 2026
25 days left
EMD
2.95 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chikkamagaluru → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Short Term Maintenance Contract (Stmc) Work From Km.113.710 To Km.130.600 Of Nh-73 (Manglore-Tumkur Section) And From Km 0.00 To Km.26.847 Of Nh-173, (Mudigere-Kadur Section) Pertaining To The Executive Engineer, National Highway Division, Hassan In The State Of Karnataka (Job No. Nh-73&173-Knt-Hassan-Stmc-2026-27-61).

BOQ

Name of Work:- Short Term Maintenance Contract (STMC) work from Km.113.710 to Km.130.600 of NH-73 (Manglore-Tumkur section) and from Km 0.00 to Km.26.847 of NH-173, (Mudigere-Kadur Section) pertaining to the Executive Engineer, National Highway Division, Hassan in the state of Karnataka (Job No. NH-73&173-KNT-Hassan-STMC-2026-27-61).
Sl. No. Item Description
1BILL NO:1 A ROAD MAINTENANCE Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials by (Tractor) and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, hire charges of all machineries etc., complete as per specifications and as per directions of Engineer-in-charge of work (For new road) - In area of light jungle by Mechanical means.
2Hill Side Drain Clearence Removal of earth from the choked hill side drain and disposing in on the valley side manuallyincluding labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
3Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete as per specifications and as per directions of Engineer-in-charge of work
4Maintenance of Hume Pipe Culverts: Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1909 as per specifications and as per directions of Engineer-in-charge of work
5Maintenance of Slab type Culverts: Maintenance of Slab type Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1909 as per specifications and as per directions of Engineer-in-charge of work
6Maintenance of Road Signs: Maintenance of road signs by way of cleaning and repainting of mandatory / regulatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1911 as per specifications and as per directions of Engineer-in-charge of work
7Maintenance of 200 metre hectometer and km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1913 as per specifications and as per directions of Engineer-in-charge of workPainting two coats with synthetic enamel paint
8Maintenance of 200 metre hectometer and km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1913 as per specifications and as per directions of Engineer-in-charge of workPrinting letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade
9Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2, including cost of all materials, all labour, usage charges of machinery, lead, lifts, loading, unloading stacking,transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work exepet lead for bitumen & emulsion. Grading-II 13mm (Nominal size).
1010 MM thick -Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
112.5MM thick-Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
12Road Studs with Lense Reflector-Providing and fixing of Reflective Raised Pavement marker (RPM’s) / Cat eyes / Road studs confirming to ASTM D4280 type - H, having reflective panels made of prismatic lens of total height of 20mm size of 130mm X 150mm and reflecting area of 13 Sq Cm with the slope of retro reflective surface The RPM’s should be fixed by using two numbers of polymetric shanks using appropriate adhesive as recommended and certified by RPM manufacturer. The raised pavement marker should support a sufficient minimum load of 13635 Kg in accordance with ministry specification. The test certificates of the product and purchase lots certificate issued by the supplier should be producted at the time of billing. The RPM's shoud be got approved by the Engineer-in-charge of work before fixing at site. The cost is inclusive of all lead lift, transportation, labour, fixing in position firmly, as per specifications and as per directions of Engineer-in-charge of work - Reflectivity Warranty as per IRC : 67-2012
13Bill No. 1B: FOR BLACKSPOT RECTIFICATION (Black Spot ID KA-(06)-106) Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, with all lifts and lead upto 1000 m, including all labour, usage charges of all machinery etc., complete as per specifications and as per directions of Engineer-in-charge of work
14Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete as per specifications and as per directions of Engineer-in-charge of work with lead of mixed material up to 1 Km (Compacted thickness) Grading-v Material (Close graded)
15Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, as per specifications and as per directions of Engineer-in-charge of work with lead of mixed material up to 1 Km (Compacted thickness).
16Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, as per specifications and as per directions of Engineer-in-charge of work execpt lead for emulsion.
17Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, as per specifications and as per directions of Engineer-in-charge of work execpt lead for bitumen.
18Dense Graded Bituminous Macadam-Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, as per specifications and as per directions of Engineer-in-charge of work except lead for bitumen, with a lead of mixed material upto 1 km, excluding cost of primer/ tack coat- 50-75 mm compacted thickness.
19Bituminous Concrete-Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, as per specifications and as per directions of Engineer-in-charge of work except lead for bitumen, with a lead of mixed material upto 1 km, excluding cost of primer/ tack coat - 30-40 mm compacted thickness.
20PCC 1:3:6 in Foundation.Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing,including cost of all materials all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
21Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical specification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete as per specifications and as per directions of Engineer-in-charge of work (excluding cost of steel and fabrication charges) PCC Grade M20 using batching plant transit mixer & manual placing .
22Supplying, Fitting and Placing un-coated TMT Fe-500 grade bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including straightening bar, cutting, bending, hooking binding with approved quality binding wire, after placing in position, tying, lapping and/ or welding whereever required (laps, hooks wastages shall not be measured & paid) incluidng cost of all materials, fabrication charges, all labour, material, usage charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
23Providing and laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row. Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6. C. 750mm Dia as per specifications and as per directions of Engineer-in-charge of work
24Rumble Strips : Provision of 15 nos rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking paint as per specifications and as per directions of Engineer-in-charge of work
25Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete as per specifications and as per directions of Engineer-in-charge of work
2610 MM thick -Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
27BILL No.2 A: ROAD PROPERTY MAINTENANCEDirection and Place Identification Signs with size more than 0.9 sqm size Board- Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of High Intensity grade sheeting lause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
28Direction and Place Identification Signs upto 0.9 sqm Size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
29Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness. firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work Post using Mild steel angles90 cm equilateral triangle
30Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness. firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work Post using Mild steel angles60 cm Circular triangle
31Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness. firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work Post using Mild steel angles60 cm x 50 cm rectangular
32Road Traffic Signals electrically operated- (Solar traffic Blinker complete set (standard Model), Each set consists of Supply, installation, testing & commissioning of 12VDC, AH batteries in Polypropylene container for U.F.S scaled maintenance free batteries, 42AH Capacity, MS Clamps for mounting battery and solar panels, G I Medium duty pipes 65mm dia, 40w / 12V solar panel of size 43.50X67X3.4 cm., Solar Traffic Blinker 220V AC, Solar Mounting Frame, Battery box, 1.1 KV Class HR ( Heat Resistant ) PVC Insulated & Un sheathed Aluminum Wires Multistoried Single Core lead wires per IS - 694 : 2010 PVC Wires 25 sqmm Al Wt : 6.7Kg , Total WT: 11.5Kg / 100 Mtr Coil, Solar charge controller including cost of all labour, usage charges of all machinery, loading & unloading all lead, lifts Etc., Complete as per specifications and as per directions of Engineer-in-charge of work Rate considered as per the approved data rate vide letter SE/NHC/BNG/TA/AE-1/Data Rate/Solar blinkers/2024-25/840 01/08/2024).
33Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge of work
34Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
35Painting Two Coats on New Concrete Surfaces. Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work
36Direction and Place Identification Signs upto 0.9 sqm Size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete as per specifications and as per directions of Engineer-in-charge of work (Object Hazard Marker of 0.3mX 0.9 Mtrs as per IRC-67-2012)
37BILL No.2 B: FOR BLACK SPOT RECTIFICATION (Black Spot ID KA-(06)-106)Road Traffic Signals electrically operated- (Solar traffic Blinker complete set (standard Model), Each set consists of Supply, installation, testing & commissioning of 12VDC, AH batteries in Polypropylene container for U.F.S scaled maintenance free batteries , 42AH Capacity, MS Clamps for mounting battery and solar panels, G I Medium duty pipes 65mm dia, 40w / 12V solar panel of size 43.50X67X3.4 cm., Solar Traffic Blinker 220V AC, Solar Mounting Frame, Battery box, 1.1 KV Class HR (Heat Resistant) PVC Insulated & Un sheathed Aluminum Wires Multistoried Single Core lead wires per IS - 694 : 2010 PVC Wires 25 sqmm Al Wt : 6.7Kg, Total WT : 11.5Kg / 100 Mtr Coil, Solar charge controller including cost of all labour , usage charges of all machinery, loading & unloading all lead, lifts Etc., Complete as per specifications and as per directions of Engineer-in-charge of work Rate considered as per the approved data rate vide letter SE/NHC/BNG/TA/AE-1/Data Rate/Solar blinkers/2024-25/840 01/08/2024).
38Providing White washing with lime to give an even shade: New work (three coats) with lime of approved quality, including cost of materials, labor complete as per specifications and as per directions of Engineer-in-charge of work.
39BILL NO.3: ROUTINE MATAINANCE OF PAVEMENT REPAIR & ROADRoutine Maintenance of road assets and pavement as given below: (i) Clearing and grubbing road land (ii) Repair of potholes/edge cuts/ruts/ patches (iii) Carrying out cleaning, removing of dust/silt/thrash from carriageway. (iv) Cleaning, clearing and repairing roadside open/unlined/lined/covered drains and cross drainage works (v) maintenance of road signs and delineators NH-73 from km 113.710 to km 130.600 (IL-16.890 km length) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58514542
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 14-12-2026
Authority
Authority Name Ministry Of Road Transport And Highways
Work Description Tender for Short Term Maintenance Contract (Stmc) Work From Km.113.710 To Km.130.600 Of Nh-73 (Manglore-Tumkur Section) And From Km 0.00 To Km.26.847 Of Nh-173, (Mudigere-Kadur Section) Pertaining To The Executive Engineer, National Highway Division, Hassan In The State Of Karnataka (Job No. Nh-73&173-Knt-Hassan-Stmc-2026-27-61).
Basic Detail
Tender No EE/NHD/HSN/STMC/NIT14/26-27
Bidding Type Tender
Location
City Chikkamagaluru
State Karnataka
Key Dates
Publish Date 13 Nov 2026
Submission Date 14 Dec 2026
Open Date 15 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 11800
EMD 2.95 Lakhs
Exemption Not Available
Document List
BOQ_981774.xls
dcac65de-5ee8-4993-9f41-4eade14af3f1.html
RFPSTMC61.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 25 days
Dec 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 26 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_981774.xls

html

dcac65de-5ee8-4993-9f41-4eade14af3f1.html

pdf

RFPSTMC61.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender