Tender For Development Of Land Construction Of Snow Clearancecontrol Room At Khanpora Handwara ,Office Building, And Residential Quarters For Newly Established Mechanical And Hospital Division Handwara (Site Development Works Only)
Tender Value
89.68 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
10 days left
EMD
1.79 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Land Construction Of Snow Clearancecontrol Room At Khanpora Handwara ,Office Building, And Residential Quarters For Newly Established Mechanical And Hospital Division Handwara (Site Development Works Only)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement, in footings, columns, pillars and walls: M20 (1:1½:3 - 1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: footings, bases of columns, columns, pillars, posts and walls (any thickness). |
| 7 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded (chain link fencing frame: intermediate posts, top and bottom rails, flats on rails and posts) |
| 8 | Providing and fixing G.I. chain link fencing mesh 50 x 50 mm (not less than 10 SWG), made of G I Wire of dia 4mm including stretching, tying to angle posts, columns and rails with G.I. binding wire / clamps, with 2mm dia wire or nuts ,bolts and washers complete in all respects as directed by the Engineer-in-Charge. (Height of fencing 6'-0\\") |
| 9 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 10 | Back filling of excavated foundation pits and wall trenches around footings, columns and wall with approved excavated earth in layers not exceeding 150 mm, including watering, ramming and compaction, complete. |
| 11 | Providing, supplying and filling approved good earth/selected soil for raising, filling and levelling of site/compound areas, obtained from an approved source, free from roots, vegetation, organic matter, rubbish, stones, debris and other deleterious materials, including excavation at source, loading, transportation, unloading, spreading in layers not exceeding 150 mm compacted thickness, watering to optimum moisture content, levelling and compaction using suitable light mechanical equipment/plate compactors/rollers to achieve the required density and finished formation levels, including all leads, lifts, handling, dressing and incidental works, complete in all respects as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender