Public Administrative Department Local Bodies Closing in 9 days TDR #58512189

Tender For Providing And Laying Plain Cement Concrete Flooring And Painting Work At The Community Hall Under Ward No. 9, Municipal Corporation Baddi.

Issued by Local Bodies · Solan, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Nov 2026
9 days left
EMD
19000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing And Laying Plain Cement Concrete Flooring And Painting Work At The Community Hall Under Ward No. 9, Municipal Corporation Baddi.

BOQ

Name of Work:- Providing and Laying Plain Cement Concrete Flooring and Painting Work at the Community Hall under Ward No. 9, Municipal Corporation Baddi.
Sl. No. Item Description
1Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick
2Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete
3Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.
4White washing with lime on undecorated ceiling and/or slopping roofs surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.
5Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also
6Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.
7supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing
8Extra for providing mechanical device chain and crank operation for operating rolling shutters.
9For shutters of doors, windows & ventilators including providing & fixing hinges/ pivots & making provision for fixing of fittings where ever required including the cost of PVC/ Neoprene gasket as required ( fitting & glazing/ panelling shall be paid for separately ) as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
10Providing & fixing glazing in aluminium doors, windows, ventilators shutters & partitions etc. with PVC/Neoprene gasket etc. complete as per the Architectural drawing & the direction of Engineer-in-Charge ( Cost of aluminium snap beading shall be paid in basic items ) glazing with glass panes of 5.50 mm ( Five point five millimeter ) thickness ( Weight not less than 13.75/Kg ( Thirteen point seven five kilograme ) per Square meter as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge
11Providing & fixing stainless steel wire mesh shutters in aluminium doors,windows, ventilators shutters and partitions etc. with PVC neoprene gasket etc. complete as per the Architectural drawing & as per direction of Engineer-in-Charge (Cost of snap beading shall be paid in basic items) as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge
12Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel http://primer.Using flats 30x6mm for diagonal braces and central cross piece and including side bolt both sides with all attachments
13Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)
14Providing and laying cement concrete 1:5:10. (One cement: five sand : ten graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including all leads and lifts and carriage of materials and other incidentals.
15Providing and fixing anodized aluminum tower bolts (Barrel type) anodized transparent or dyed to required shades and color with screw etc. complete a) 200x10mm (Two hundred x ten millimeter)
16Providing and fixing aluminum handles anodized transparent or dyed to required shades and color with screws etc. complete a) 125 mm (One hundred twenty five millimeter)
17Electrical Installation Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58512189
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 27-11-2026
Authority
Authority Name Municipal Council
Work Description Tender for Providing And Laying Plain Cement Concrete Flooring And Painting Work At The Community Hall Under Ward No. 9, Municipal Corporation Baddi.
Basic Detail
Tender No Mcorp/Baddi/2026-6435-6437
Bidding Type Tender
Location
City Solan
State Himachal Pradesh
Key Dates
Publish Date 13 Nov 2026
Submission Date 27 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 944
EMD 19000
Exemption Not Available
Document List
718fa882-f652-4975-a53d-ef91a6e6b345.html
BOQ_220979.xls
SBD12nov26.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

718fa882-f652-4975-a53d-ef91a6e6b345.html

xls

BOQ_220979.xls

pdf

SBD12nov26.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender