Tender For General-Naduvattom Investigation -Investigation Work For Junction Modification -Investigation Work-Tavanur Lac-General Civil Work
Tender Value
2.20 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
5500
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Naduvattom Investigation -Investigation Work For Junction Modification -Investigation Work-Tavanur Lac-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | INVESTIGATION WORK |
| 2 | OD180771/2026-2027:Detailed topographic survey using Total station/mobile Lidar and preparation of site plan withcontour intervals of 5mx5m of minimum of 15m on either side of the center line and takingcross section details at 25m intervals on strait roads and 10m interval on curves ( surveyincludes details of all features as mentioned in the scope of the in plain terrain work within thelimit of survey). The survey shall be include Chainage-wise details of villages and establishingDGPS Control points at starting and ending of the project in pairs and at 4Km intervals (inpairs) in plain and rolling terrains 2.5Km intervals ( in pairs) in hilly terrains. It shall alsoinclude establishing inter visible traverse control points not morethan 250m apart with accuracy at least 1:10000 and desirable 1:20000 in distance measurement.Elevations on each of the control points connected to MSL of GTS Bench marks. Usingprecision levelling. Separate bench marks need not be established. Including Taking sufficientColor copy prints (5nos) |
| 3 | 56.16.8: Providing and fixing RCC pillars for DGPS control points of size 0.3 m x 0.3 m,0.5 m long, 0.1m above ground level and 0.4 m below GL casted in M20 Grade concrete reinforced with 4 nos of 8 mm dia longitudinal bars and 6mm dia stirrups @ 0.15m c/c, firmly fixed in position by means of PCC of 0.1m wide and 0.4 m deep around the pillars in M15 grade concrete below ground level including painting 2 coats on exposed surface with synthetic enamel paint` |
| 4 | 56.16.9:Providing and fixing RCC pillars at every 250 m interval along the road, of size 0.15 m x 0.15 m, 0.45 m long, 0.15 m above ground level and 0.3 m below GL casted in M20 Grade concrete reinforced with 4 nos of 8 mm dia longitudinal bars and 6 mm dia stirrups @ 0.15 m c/c, firmly fixed in position by means of PCC of 0.075 m wide and 0.3 m deep around the pillars in M15 grade concrete below ground level including painting 2 coats on exposed surface with synthetic enamel paint |
| 5 | 56.17a.1:Data for inventory survey for upto 12 metre wide road, Survey work for collecting the details of road inventories and recording in prescribed format attached based on the chainage marking including marking chainage at 50m intervals and taking details such as existing carriage way width, shoulder width ,type of shoulder, width and location of approach road, details of existing drains,culverts and bridges as given in the prescribed format attached pavement conditions ( Details of pot holes, ravelling, fog seal, slurry seal edge damage etc) road safety measures ( details of road sign, crash barriers, guard stones, delineator post, hazard markers etc) and all other existing retaining structures in road, including documentation charges etc as per the direction of the officers at site. |
| 6 | investigation 2 |
| 7 | 56.18a.4:Turning movement survey at Four arm Junction. Conducting turning movement survey at junction for one day for peak hours between 7 am to 7.00 pm as instructed by the engineer by recording the classified volume count in the prescribed format including provision for engaging technicians and setting up of station etc and compiling the data and submitting the same in hard and soft copy etc complete as per the instructions of the PWD officials. |
| 8 | 56.17a.2:Study of pavement composition by cutting open pit at tar edge to get the details of layers (thickness and type) of pavement composition - at one location as suggested by the engineer in charge, carefully by excavating pit of area 1.00x0.60m through over laying bituminous and granular layer including BC,BM,WMMand GSB at tar edge and refilling and compacting the excavated pit to lines and levels with excavated materials as directed by the departmental officers at site and reporting the pavement composition with photographs and measurements specifying the type of layers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender