Tender For Short-Term Maintenance Contract (Stmc) Of Kaij To Kusulamb Section Of Nh-548 C From Km 179+258 To Km 199+258 [Total Project Length 20 Km] In The State Of Maharashtra.
Tender Value
7.75 Crore
Estimated cost
Bid Submission
08 Dec 2026
19 days left
EMD
7.76 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Beed → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Short-Term Maintenance Contract (Stmc) Of Kaij To Kusulamb Section Of Nh-548 C From Km 179+258 To Km 199+258 [Total Project Length 20 Km] In The State Of Maharashtra.
BOQ
| Sl. No. | Item Description |
| 1 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete. |
| 2 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 3 | Repair of steel railing to bring it to original shape cleaning and repainting as per drawing etc. complete |
| 4 | Cross- Stitching as per specifications and standards defined in IRC SP:83-2018 |
| 5 | Stapling as per specifications and standards defined in IRC SP:83-2018 |
| 6 | Sealing of crack/porous concrete grout by injection through nipples complete as per Clause 2803 of Technical Specifications and as per approval of the Engineer. |
| 7 | Applying Epoxy mortar over leached honey combed and spalled concrete surface and exposed steel reinforcement complete as per Technical Specifications Clause 2804 and as per approval of the Engineer. |
| 8 | Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)\\"\\" |
| 9 | Providing and laying in situ / ready mix / ready mix M20 RCC work with trap/ granite/ quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, finishing and curing etc. complete. (fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement) |
| 10 | Providing and cutting, bending, hooking, laying in position and tying mild steel bars for reinforcement as per detailed drawings for all reinforced cement concrete works etc. complete As directed by Engineer in charge. (Upto 6.0 M Height)BR 35 Page No. 134 |
| 11 | Providing and fixing cautionary / warning sign board of size 60 cm. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm. equilateral triangle M.S. sheet with Engineering grade, |
| 12 | Providing and fixing Mandatory / Regulatory sign board of circular shape of size 60 cm. dia. prepared on 16 gauge M.S. sheet including painting with zinc chromate stoving primer and two coats each of white back ground,red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border, coated with non pealable crystal clear protective transparent coat retaining 100% relection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.45 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc. complete. circular shape of size 60 cm. dia. M.S. sheet with Retro reflective sheet Engineering grade |
| 13 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meterr made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.2mm aluminum sheet Class B |
| 14 | Providing and fixing LED based Solar Blinker of specification of 5Watt of pole height 4m ht ,300mm dia of led panel size ,20W solar power,yellow powdwe coated,COLOUR RED /Amber with solar panal mounting bracket and accessories. |
| 15 | Providing, Laying, Spreading and compacting hard murum having PI < 6 in including spreading in uniform layers on a prepared Surface & compacting with Static roller having weight 8 to 10 MT including necassary artificial watering, all materials, labour, machinery, guarding, barricating complete with all leads & lifts of all materials etc. complete |
| 16 | Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a high abrasion resistant, non-shrink, high strength,low porosity, UV resistant repair mortar on Concrete road etc including cleaning the Concrete surface on concrete road by breaking, cleaning with wire brush , removing existing loose particles etc. by using wire brush,breaker machine, air (using other mechanical / manual means) then applying Kelox ( water missible epoxy)of , bond coat on prepared concrete surface for bonding the old surface to new repair mortar etc. as per manufacturer's specification ( using other manual / mechinical means) then apply repair mortar of PICC to fill the concrete surface upto 25 mm coat etc.complete with all leads and lifts, Material, Machinery, Labour etc. complete as per specification and as directed by engineer-in-charge. |
| 17 | Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a high abrasion resistant, non-shrink, high strength,low porosity, UV resistant repair mortar on Concrete road etc including cleaning the Concrete surface on concrete road by breaking, cleaning with wire brush , removing existing loose particles etc. by using wire brush,breaker machine, air (using other mechanical / manual means) then applying Kelox ( water missible epoxy)of , bond coat on prepared concrete surface for bonding the old surface to new repair mortar etc. as per manufacturer's specification ( using other manual / mechinical means) then apply repair mortar of PICC to fill the concrete surface upto 15 mm coat etc.complete with all leads and lifts, Material, Machinery, Labour etc. complete as per specification and as directed by engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender