Tender For Supply, Delivery, Installation, Testing, And Commissioning Of A Community Water Purification Plant (Cwpp) With A Solar-Powered Pump Set Installed On A Shallow Tube Well (Stw), Capable Of Removing Contaminants
Tender Value
10.64 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
16 days left
EMD
21285
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barpeta → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Delivery, Installation, Testing, And Commissioning Of A Community Water Purification Plant (Cwpp) With A Solar-Powered Pump Set Installed On A Shallow Tube Well (Stw), Capable Of Removing Contaminants
BOQ
| Sl. No. | Item Description |
| 1 | Annexure-A (APHE 2015-2016) |
| 2 | Transportation of all ancillary equipments, camp materials, welding set, rig accessories etc. from Divisional Head Quarter to worksite to and fro including cost of P.O.L. all complete as directed.(a) Upto 100.00 Km distance from Divisional H.Q. |
| 3 | Transportation of all store materials like pipes, strainer, cone, socket, clamp, bentonite etc. from Divisional Head Quarter to worksite to and fro including cost of P.O.L. all complete as directed. (a) Upto 100.00 Km distance from Divisional H.Q. |
| 4 | Transportation of air compressor from the Divisional Head Quarter to the drilling site with all accessories including cost of P.O.L. all complete as directed. (a) Upto 100.00 Km distance from Divisional H.Q. |
| 5 | Labour charge for making bore hole of 100 mm dia and collecting sample of soil at every 3.0 m depthor wherever there is a change of strata in sample boxes with the distinguishing marks includingarranging and carriage of necessary boring materials / tools etc. and withdrawing the pipe for lowering well assembly etc. all complete as directed.a) for 0 to 20 m depth |
| 6 | Labour charge for making bore hole of 100 mm dia and collecting sample of soil at every 3.0 m depthor wherever there is a change of strata in sample boxes with the distinguishing marks includingarranging and carriage of necessary boring materials / tools etc. and withdrawing the pipe for lowering well assembly etc. all complete as directed.b) for 20 to 40 m depth |
| 7 | Labour charge for making bore hole of 100 mm dia and collecting sample of soil at every 3.0 m depthor wherever there is a change of strata in sample boxes with the distinguishing marks includingarranging and carriage of necessary boring materials / tools etc. and withdrawing the pipe for lowering well assembly etc. all complete as directed.c) for 40 m to 60m depth |
| 8 | Labour charge for rehoring to make 200 mm dia borehole including arranging and carriage of necessary boring materials etc and with drawing the pipe all complete as directed a) for 0 to 20 m depth |
| 9 | Labour charge for rehoring to make 200 mm dia borehole including arranging and carriage of necessary boring materials etc and with drawing the pipe all complete as directed b) for 20 to 40 m depth |
| 10 | Labour charge for rehoring to make 200 mm dia borehole including arranging and carriage of necessary boring materials etc and with drawing the pipe all complete as directed .c) for 40 m to 60m depth |
| 11 | Labour charge for sinking lowering fitting fixing in position of 130mm dia UPVC pi'pe assembly comprising of strainer. pipes und cone in potable water bearing strata, washing the bore well etc. and supplying necessary jointing materials including carriage of materials and cleaning and priming the tube well all complete as directed.(a) For 0 to 50 m depth |
| 12 | Developing of the D.T.W. with air compressor, Make- Kirloskar / Cumins all complete as directed. |
| 13 | Supplying and packing pea gravel around the periphery of casing including screening, washingetc. all complete as directed. |
| 14 | Supplying fitting, fixing MS clamp of size 15 mm thick and 150mm width having projection of 300 mm and three holes of 20mm dia for clamping the plates by 16 mm dia hexagonal bolts of length 75mm and nuts on both sides encircling the column pipe including two coats of enamel paint over one priming coat of different dia all complete as |
| 15 | Fabrication and supplying of MS Cone of 150mm dia x 1.00m long made out of 150mm dia x 1.00m long made out of 150mm dia x 8 mm thick MS pipe by cutting and welding at one end all complete as required as directed. |
| 16 | Fabrication and supplying of detachable M.S.: Deep Tube Well cap for fitting at the top of the DTW made out with 100 mm dia GI Socket of approved brand including cutting & welding with fitting, fixing hinge legs at one end and taple at the other end and covered with MS plate of 4 mm thick etc all complete as required as directed |
| 17 | Annexure- B (APHE 2015-2016) |
| 18 | 100 mm dia UPVC Pipe (IS : 12818/1992) |
| 19 | 100 mm dia UPVC Ribbed screen pipe |
| 20 | Labour charge for providing bentonite clay packing(including the cost of bentonite clay) arround 40mm dia tube well upto a depth of 6 m from topwith 100 mm dia boring including supplying thebentonite clay and carriage of materials allcomplete as directed and specified. |
| 21 | Elevated Water Tank of 2000 litres with 3.10 m staging for raw water and 2000 litres for clear water supported on the brick platform for Arsenic/Fluoride Removal plant of discharge 2000 LPH (DSR 2021) |
| 22 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil |
| 23 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from naturalsources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 25 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 32 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 33 | Mild steel plates |
| 34 | Raised platform alongwith Boundary wall grill and gate |
| 35 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil |
| 36 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 37 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 38 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 39 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. |
| 40 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | 20 mm cement plaster of mix :13.3.1 1:4 (1 cement: 4 fine sand) |
| 43 | Supplying, installing, testing, and commissioning a raw water submersible pump set |
| 44 | Providing, installation and commissioning Solar Submersible pump (with different heads) with Power unit (Solar Modules), Controller, Module mounting Structure, Tracking (Manual Sun tracking system), 3 core cable, earthing, lighting protection, Civil work (excavation and installation of base for panels), miscellaneous accessories, Solar module cleaning system, all items conforming to relevant IS/IEC standards with warranty of 5 years and transportation to Guwahati, Assam for the following capacity as directed by department and subjected to SoPs, guidelines issued from department2023-24 1/ RFP No. 31 of 1 HP |
| 45 | Analysis-I Package_No.12 RFP 39 MINI PWSS |
| 46 | 1 stage: Multigrade Sand Filter (MGF)Size:FRP 350 mm 1625 mmFlow Rate: 2000 LPHFilter Media: Pebbles, Gravel, Filter Sand & AnthraciteMPV Size: 25 NB Top Mount 2nd stage: Iron removal Filter (IRF)Size: FRP 350mm 1625mmFlow rate: 2000LPHFilter Media: Pebbles, Gravels, Filter Sand & MZ10+MPV Size: 25 NB Top Mount 3rd stage: Arsenic Removal Filter (ARF)Size: FRP 350mm x 1625 mmFlow Rate: 2000 LPHFilter Media: Ferrix A33EMPV Size: 25 NB Top Mount |
| 47 | Analysis-II |
| 48 | Providing Service connection LT Line to the water purification plant including PSC pole 7.5m, LT stay, LT Guy Insulator, Saty Wire, 7/14 SWG, anchore clamp, Gll Hook, LT Connector, Nut & Bolt, 10mm BTC Cable as per direction of the department.For Each Job |
| 49 | Analysis-III |
| 50 | 10(Ten) months operation and maintenance of the entire plant including supplying of all accessories manpower, spares, chemical and other consumables as and when required and successful completion and trial run of the plant for three months (including commissioning but excluding the cost of electric power). The operation and maintenance will also cover change of filter media and it 2022/0621 extra cost as per protocol at no extra cost. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender