Tender For Repair And Renovation Of W/S, S/I And S/S To Different Toilet Of Sub-Jail At Jeypore Municipality Under State Plan, Demand No.13/4215 For The Year 2026-27
Tender Value
25.14 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
7 days left
EMD
25147
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of W/S, S/I And S/S To Different Toilet Of Sub-Jail At Jeypore Municipality Under State Plan, Demand No.13/4215 For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all materials,labour and T&P for 1000 litre capacity Triple Layer white Cylinderical Vertical water storage tanks (ISI Marked) (Superme/ Plasto/ Sintex make) |
| 2 | Supplying all materials,labour and T&P for construction of staging for O.H.service tank(PVC) on the existing roof of the building as per drawing, specification and direction of Engineer-in-charge etc all complete |
| 3 | Dismantling and removing old tiled flooring including removing the bese coarse and stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 4 | Dismantling and removing marble chips dados,skirting from walls including racking out joints 12mm.deep and stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 5 | Cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages to wall and floor per mtr. |
| 6 | Dimantling and removing doors, windows, and ventilators including removal of frames, hinges, fastenings and stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 7 | Fabricating supplying and fixing iron shutter with iron chaukahat made out of 35mm x 35mm x 5mm M.S.angle 25mm x 6mm M.S flat and 18gauge M.S. sheet fitted with aldrop, door handle tower bolt etc. complete |
| 8 | Providing, fitting & fixing of Single leaf soild WPC door shutter of 30mm thick compacted with wood grain finished with 2 Nos SS Handle (150mm) 2 Nos SS Tower Balt (250 x 10) 1No SS Aldrop (400 x 300), 4Nos SS Butt Hings (125 x 8.5 x 5.5(, Backside Butffer with all necessary fittings complete with approved colour as per direction of EIC. (century ) NSWT) Ground floor. |
| 9 | Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 10 | Supplying all materials,labour,T&P for Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in superstructure |
| 11 | Supplying all materials, labour, T&P for CC(1:3:6) with 4cm.crusher brokn Granite metal |
| 12 | Supplying all materials, labour, T&P for Cement concrete (1:2:4) with 12mm size hard granite chips. |
| 13 | Supplying all materials, Labour T&P for C.P. 12mm thick in C.M(1:4) as per P.H.Secification etc. |
| 14 | Supplying all materials, Labour T&P for C.P.Punning as per P.H.Secification etc.. |
| 15 | Supplying all materials, labour, T&P for fixing of precast glazed tiles in floors and walls on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the polishing complete including cost of glazed tile. (Kajaria/ Jhaonsan/ Orient Bell Make) |
| 16 | Supplying all materials, labour, T&P for fixing tiles in dados skirting and risers of steps on 12mm thicks cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of Engineer-in-Charge. including cost of glazed tile (Kajaria/ Jhaonsan/ Orient Bell Make) |
| 17 | Supplying all labour T&P for Finishing surface of walls with Acrylic putty (water based) of approved make & finished smooth & even surface to receive painting incluidng cost of materials taxes labour etc. |
| 18 | Wall painting 2 coat with plastic emulsion paint including cost of brushes and putty (Using Asian paint weather Coat Apex Ultima - 04 Year Warranty) |
| 19 | Supplying all materials,labour and T&P for Enamel Painting two coats on new wood work / steel work (Using Asian paint weather Coat Apex Ultima - 05 Year Warranty) |
| 20 | Fitting & fixing G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties including cost of materials ,labour for fixing etc all complete (Tata / JSW/ Jindal make) |
| 21 | Supplying all materials,labour and T&P for fixing water closet (I.W.C. or Orissa pan) duly embedded in cement concrete (1:3:6) using 12mm. size h.b.g. chips [Excluding foot rest for I.W.C. and trap] all complete as per specification (Jaguar/ Hindware/ Cera Make) |
| 22 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Jaguar/ Hindware/ Cera Make) |
| 23 | Supplying all materials,labour and T&P for fixing 10 ltr capacity low level cistern with fitting such as siphonic arrangement,15mm. nominal size PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification. |
| 24 | Supplying all materials,labour and T&P for fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification (Cera/ Jaguar/ Hindware make) |
| 25 | Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (600x350mm.) with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:3:6) using 12mm. size h.b.g. chips all complete as per specification (Cera/ Jaguar/ Hindware make) |
| 26 | Supplying all materials,labour and T&P for fixing 100mm dia \\"P\\" trap for water closet including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification |
| 27 | Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 28 | Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification (Cera/ Jaguar/ Hindware make) |
| 29 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification (Cera/ Jaguar/ Hindware make) |
| 30 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings (Cera/ Jaguar/ Hindware make) |
| 31 | Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification (Cera/ Jaguar/ Hindware make) |
| 32 | Towel Rail |
| 33 | Towel Ring |
| 34 | Supplying all labour and T&P for fixing of C.P.fitting fixture of the following size as per specification all complete (Jaguar/ Hindware/ Cera Make) |
| 35 | 15mm dia C.P Angular Cock with stop cock |
| 36 | 15mm. dia.C.P. Long body Bib cock |
| 37 | 2Way Bib cock |
| 38 | 15mm dia PVC Connection Pipe |
| 39 | 15mm dia PVC waste Pipe |
| 40 | 25mm dia UPVC Ball valve |
| 41 | PTMT Longbody bib cock |
| 42 | PTMT shortbody bib cock |
| 43 | Supplying all materials,labour,T&P and laying to leave and slope and jointing with sulvent cement for PVC pipes including bad concrete and (1:4:8) and humps over top the pipe (1:2:4) as per specification all complete |
| 44 | (a) 110mm dia PVC Pipe (4kg) |
| 45 | (b)160mm dia PVC Pipe (4kg) |
| 46 | Supplying all materials, labour, T&P and fixing PVC pipes (4Kg/Cm2) and fittings to walls with nails, bobiins and wooden plugs as per P.H. sepcification. |
| 47 | (a) 110mm dia PVC Pipe (4kg) |
| 48 | (b) 75mm dia PVC Pipe (4kg) |
| 49 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. (Size 0.75mx0.75mx0.75m) |
| 50 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x2.55mtr. Deep soak-way pit with dry brick walling up to 2.10mtr. height and bbrick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. (Soak-way pit size -.20mtr.dia.x2.55mtr.) |
| 51 | Supplying all materials,labour and T&P for constructing septic tank with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. [IS-4111(part-1) 1967.]20 users'Septic Tank size [2.30x1.10x1.80mtr.] |
| 52 | supplying materials, labor, and equipment for cleaning a septic tank, M.H Chamber (likely meaning Manhole Chamber), Inspection Chamber, and the associated sewerage line. This includes removing sludge from the septic tank and spreading it within a 50-meter radius, as directed by the Engineer-in-Charge |
| 53 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete (Supreme/ Auroplast/ Astral make) |
| 54 | 25mm dia PVC Pipe |
| 55 | 20mm dia PVC Pipe |
| 56 | 25mm dia HDPE Pipe |
| 57 | 20mm dia HDPE Pipe |
| 58 | Supplying all labour and T&P for fixing of 110mm dia PVC Nani Trp with jalil fitting fixture of the following size as per specification all complete |
| 59 | 110mm dia P.V.C. Nahani Trap with out Jally |
| 60 | 110 mm dia P.V.C. SWR Vent Cowl |
| 61 | 110mm dia PVC SWR Door cap |
| 62 | 110mm dia P.V.C. SWR H/R bend Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender