Tender For Ph Works To Construction Of 2 Nos E Type Quarter At Phc Hariharjore Dam Site In The District Of Sonepur For The Year 2024-25
Tender Value
6.20 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
8 days left
EMD
6300
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonepur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ph Works To Construction Of 2 Nos E Type Quarter At Phc Hariharjore Dam Site In The District Of Sonepur For The Year 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all materials labour T & P and fitting & fixing u-PVC ventilating pipes and fittings of the following O.D. conforming to ISI No. 13592 / 1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method / as per manufacturers specification testing e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.110mm dia U-PVC pipe |
| 2 | 110mm dia ‘ P’ Trap |
| 3 | 110mm dia ‘Nahani ’ Trap |
| 4 | 110mm dia Door Bend |
| 5 | 110mm dia Offset |
| 6 | 110mm dia Plain bend |
| 7 | 110mm dia cowl |
| 8 | 75mm dia U-PVC pipe |
| 9 | 75mm dia Door Bend |
| 10 | 75mm dia Plain bend |
| 11 | 125mm dia C.P. Grating |
| 12 | Supplying all materials labour T & P and cutting holes through brick masonary walls for taking H.C.I./ PVC and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. 375mm thick wall |
| 13 | Supplying all materials labour T & P and fixing wash down water closet (Anglo Indian water closet) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification and direction of E.I.C.E.W.C. with ‘P’ Trap with sheet cover |
| 14 | Supplying all materials labour T & P and fixing water closet, squatting pan (Indian type W.C. pan / Orissa pattern squatting pan) duly embedded in C.C. (1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C.580mm Orissa pan(make -Parryware) |
| 15 | Supplying all materials, labour, T & P and fixing wash basing with hole for pillar taps with C.I./M.S. brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.550mm x 400mm W.H.B. with 32mm dia c.p. west, west pipe , brackets and connection pipe .(make- parryware) |
| 16 | Supplying all materials, labour T & P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plugs with C.P. screws and washers complete as per P.H. specification and direction of E.I.C.600mmx450mm B.E. Mirror |
| 17 | Supplying all materials, labour T & P and fixing standard size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.450mmx125mm size plate Acrylic shelf |
| 18 | Supplying all materials, labour T & P and fixing standard size C.P. towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.25mm x 600mm long C.P. towel rail |
| 19 | C.P. towel Ring |
| 20 | Supplying all materials, labour T & P and fixing standard size C.P. soap holder complete with C.P. Brass brackets fixed to wooden plug with C.P. screws as per P.H. specification and direction of E.I.C. |
| 21 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.600x450x200 mm stainless steel kitchen sink (Mousumi make) 40mm dia CP waste ,pvc waste pipe |
| 22 | Factory made FRP(alternately called GRP)doorframe of size 75mmx100mm fabricated using E-glass chopped strand mat(CSM)U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thickness of the GRP skins shall not be less than 2.00mm.The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,Six numbers of 260mmx 25mmx5mm size 'S' shaped MS flat hold fast shall be provided with the frame.The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications.The finish of door frame will be plain colour white/ Ivory/Beige/Light grey/Golden brown/ Mahogany/Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C. |
| 23 | Factory made single leaf rigid FRP(alternately called GRP)sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450gsm E-glass Chopped Strand Mat(CSM)impregnated with orthopthalic palyester resin.The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickn ess and a density of 20kg/cu.mtr shall be used as core material. wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fitting the metal fittings such as tower bolts,aldrops, handles etc shall be provided.A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the salwood reiforcements and the skins.the material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 24 | Supplying all materials labour T & P and fixing Ciramic digital tiles in floors, threads, landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C. |
| 25 | Supplying all materials labour T & P and fixing porcelain glazed tiles in dados skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C. |
| 26 | S.D. PORTION:- Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.Inside size 760mm x 760mm x 460mm |
| 27 | Supplying all materials labour T & P and laying P.V.C. pipe sewer line, Grade-A of the following internal dia in trenches (to level or slope) and jointing with gasket & stiff mixture or C.M. (1:1), C.C. (1:3:6) with 40mm size h.g. metal on bed of the trench and hunching or allround concrete encasing with C.C. (1:4:8) using 40mm size h.g. metal including curing, conveyance to workside, payment of royality, taxes etc. and testing all complete as per approved drawing, specification and direction of E.I.C.110mm dia p.v.c.pipe with hunch top |
| 28 | Supplying all labour T & P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B. Brickwork in C.M.(1:6) for the remaining height at top, 12mm thick C.P. (1:4) inside and outside over masonary brick work, gravel packing in the rear of well steining R.C.C. cover slab in C.C. (1:1.5:3) using 12mm size h.g. chips fitted handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, wattering, curing, conveyance of all meterails to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.0.90m dia x 2.00m deep soak pit. |
| 29 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C. Initial lift upto 1.50m |
| 30 | From 1.50m to 3.00m depth |
| 31 | Supplying all materials labour T & P and filling foundation and plinth with river sand well watered and rammed including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per the direction of E.I.C. |
| 32 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 33 | Supplying all materials labour T & P and providing C.C. (1:1.5:3) using 12mm h.g. chips including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 34 | Supplying all materials labour T & P and providing brick work with flyash Bricks having crushing strength not less than 75kg. / c.m2 with dimensional tolerance +/- 8% including watering, curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. Flyash Brick work in c.m.(1:4) F & P |
| 35 | Supplying all materials labour T & P and providing rigid and smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 36 | Supplying all materials labour T & P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 37 | Supplying all materials labour T & P and providing R.c.c (1:1.5:3) .using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 38 | Supplying all materials, labour T & P and providing cement plaster on brick / stone work including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. 12mm thicks C.P. (1:3)with punning |
| 39 | Supplying all materials labour T & P and fixing of R.C.C. baffle wall precast with C.C. (1:1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 40 | Supplying all materials, labour, T & P and providing fitting & fixing PVC Tee in wall including fitting the necessary with cement concrete (1:1.5:3) with 12mm size h.g. chips all complete including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.(a) 110mmx110mm x110mm p.v.cTee |
| 41 | Supplying all materials labour T&P and Providing cement flush pointing (1:3) to brick masonary including watering, curing, conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 42 | Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C |
| 43 | Filling in foundation & plinth with excavated materials, including watering, and ramming as per direction of E.I.C. |
| 44 | W/S. PORTION:-Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brick work in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30m x2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering, bending and binding of rod etc watering,curring, conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of 1st floor |
| 45 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000Ltr. Capacity Water Storage Tank |
| 46 | Supplying all materials, labour, T & P and fitting & fixing 10 ltr. capacity low level flushing cystern with a pair of clamps complete with fittings 32mm dia p.v.c. flush bend, 15mm dia, pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. 10Ltr. Capacity lowlevel cistern |
| 47 | Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.25.mm dia PVC(ASTM) pipe(External) |
| 48 | 20mm dia C-PVC pipe(Internal) |
| 49 | Supplying all materials, labour, T & P cutting holes through brick / stone masonry works including making good the damages in c.m. (1:4) for taking G.I./PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.250mm thick wall (Ground Floor) :- |
| 50 | Supplying all materials, labour, T & P and cutting grooves in pucca floors and walls for taking G.I. / PVC pipes and making good the damages as per direction of E.I.C. |
| 51 | Supplying all materials, labour, T & P and fitting & brass/C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.(plaza/Amber)15mm dia C.P.L.B. Bibcock |
| 52 | 15mm dia C.P. Two way Bibcock |
| 53 | 15mm dia C.P. Pillar cock |
| 54 | 15mm dia C.P. angle stopcock |
| 55 | 15mm dia C.P. Concealed stopcock |
| 56 | 15mm dia C.P. Revolving Shower with shower Arm |
| 57 | 15mm dia Health Faucet & 1.0m long Flexible pipe |
| 58 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 59 | 15mm dia C.P. Extension Piece |
| 60 | 15mm dia C.P. Flange |
| 61 | Supplying all materials, labour, T & P and fitting and fixing of I.S.I. mark 1H.P. single phase vertical water cool submersible pump set with discharge1800/2200Lit./Hour & a head-55/70mtr.of reputed make (C.R.I./ K.S.B./Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 62 | Supplying all materials, labour, T & P and fitting & fixing of 1.0H.P. single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 63 | Supplying all materials, labour, T & P and fitting & fixing of I.S.I. mark D.O.L. starter of reputed make like B.C.H. or equivalent for 1HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 64 | Supplying all materials labour “T& P “ and fitting & fixing of 1.5mm2 3core copper flat suitable cable having I.S.I. mark of reputed company like B.C.H./ Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 65 | Supplying all materials labour “T& P “ and fitting & fixing plastic rope with MS well cover, M.S. Clamp,stainless steel short piece, Bend & socket, union including all cost conveyance & taxes etc. all completes as per P.H. Specification direction of E.I.C. |
| 66 | Supplying all materials labour “T& P “ and fitting & fixing of H.D.P.E. pipes and pipe fittings with making connection to pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification direction of E.I.C. 32mm dia H.D.P.E. pipe |
| 67 | 125mmx100mm Size Bore Well Through DTH Method:-Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL level through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 125mm dia PVC/ GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No)Drilling of 125mm. dia. Bore-0.00mtr to 30.00mtr |
| 68 | Drilling 100mm dia. Bore-30.00mtr to 80.00mtr |
| 69 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)lowring of 125mm dia pipes-0.00mtr to 30.00mtr |
| 70 | Cost of 125mm dia PVC casing pipes-0.00m to 30.00m |
| 71 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender