Tender For Construction Of Mini Water Supply Scheme At (A) At Kankebar Near Head Of Hiralal Mahto (B) At New Colony Near Head Of Raja Kushwaha © And Bardharwa Near Head Of Somar Mahto In Ward No.31
Tender Value
17.43 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
34872
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mini Water Supply Scheme At (A) At Kankebar Near Head Of Hiralal Mahto (B) At New Colony Near Head Of Raja Kushwaha © And Bardharwa Near Head Of Somar Mahto In Ward No.31
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I (vide classification of soil item -B) |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume) |
| 3 | Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I |
| 4 | Providing RCC M-200 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. |
| 5 | Columns footing: |
| 6 | Floor |
| 7 | Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 8 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. 80% of earth work |
| 9 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.Cement + Rod (20km) |
| 10 | Sand (20km) |
| 11 | Stone Chips (20km) |
| 12 | Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for 2% hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc including nessary nut bolt complete as per approved drawing. |
| 13 | Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP 2021-2022 Sec F Item 6) |
| 14 | 200mmx165mmx125 m dia deep bore well supplying ll material labour and tools and equipment for drilling 200/165 mm dia bore well in any kind of sell rock by using DTH super rig machine and bell hammer technology inclusive of molillisation de molillisation of rig air compressor all assesseries tools and plant labour etc., all compete job inclusive transportation charges etc.From 0.0M to 50.00 M below G.L. |
| 15 | FROM 51M to 175 M |
| 16 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 17 | Supplying,tools tackels & lowering of 200mm dia MS Erw Casing Pipe Of 6mm wall thickness including welding charges , cost of Pipe etc including all taxes, vat, Excise duty,freight charges with inspection charges etc as applicable,etc all complete job |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in 32 mm nominal Dia |
| 19 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete : 150 mm clamp |
| 20 | Supplying all materia. Labours,tools & equipments for fitting & fixing 200 mm dia MS cap over casing Pipe Complete job. |
| 21 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore : |
| 22 | Submersible pump set 100mm dia (with polypropylene/nory impeller) up to 20 stage.: 2 HP |
| 23 | Supplying XLPE /PVC insulated,armoured cable 1100 v grade with ISI mark Three and half core standerd aluminium conductor with 6 mm thick 25mm width M.S spacer with G.I earth wire 6 mm thick 25mm width with G.I earth with 6 sq mm , complete in an approved manner.3 core 25 sq mm |
| 24 | Supplying and fixing fully automatic star delta starter |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15mm dia - |
| 26 | 20mm dia - |
| 27 | 32mm dia - |
| 28 | Providing and fixing male ended 15mm dia brass bib cock -do- -do- all complete job as per specification and direction of E/I. |
| 29 | Providing and fixing C.I. stop cock of approved quality -do- -do- all complete job as per specification and direction of E/I. |
| 30 | Providing and fixing gun metal full way valve -do- -do- all complete job as per specification and direction of E/I.25mm dia - |
| 31 | 32mm dia - |
| 32 | Providing and placing on terrace (all floor level) polythelyne water storage tank (Syntex) ISI marked all complete job. |
| 33 | Wiring for Circuit/Submain Wiring along with earth earth wire do…do… 2x4.0 sq.mm+1x4.0 sq.mm earth wire |
| 34 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 35 | Add GST @18% |
| 36 | Add Labour Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender