Tender For Residual Work Of L045-Parsarai To Kochka (Vr45)
Tender Value
3.40 Crore
Estimated cost
Bid Submission
19 Nov 2026
1 days left
EMD
6.82 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purnia → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Residual Work Of L045-Parsarai To Kochka (Vr45)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of StructureDismantling of existing structure like culvert, bridges, retaining walls and other structure comprising, of masonary, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dimanteld materials disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technicals specification Clause 202(b) Reinforced Cement Concrete(ii) 2.0 m Span. |
| 2 | Dismantling of StructureDismantling of existing structure like culvert, bridges, retaining walls and other structure comprising, of masonary, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dimanteld materials disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technicals specification Clause 202(b) Reinforced Cement Concrete(ii) 2.0 m Span. |
| 3 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100 m as per Technical Specification Clause 301.5 |
| 4 | (i) Excavation in cutting in soil by manual means for carrying of cut earth to embankment site with a lift up to 1.5 m lead upto 50 m as per Technical specification Clause 302.3. |
| 5 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 |
| 6 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 7 | (By mix in place method) Gradding - IIConstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 8 | Water Bound Macadam with stone screenings Gr II (By Machnical Means)Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. |
| 9 | Water Bound Macadam with stone screenings Gr III (By Machnical Means)Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 10 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 11 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 12 | Mixed seal Surfaceing (Type B)Providing , laying and rolling of close graded premix surface material of 20 mm thick composed 11.2 mm to 0.9 mm (Type A) or 13.2 mm to 0.09 mm (Type B) aggregate using penetraiotn grade bitumen to required line, grade and level to serve as wearing course on a previously base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller and finishing to required level and graded as per Technical Sepecification Clsuse 509 Type B. |
| 13 | CEMENT CONCRETE PAVEMENT Construction of un-reinforced,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any type as per Clause 1501.2.2 M25(Grade),coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, construction joints, admixtures as approved, curing of concrete slabs for 14 days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 Unit=cum |
| 14 | KM STONE |
| 15 | 200 m stone (precast) |
| 16 | 900 mm equilateral & triangle , OR |
| 17 | 600 mm equileter |
| 18 | 600 mm circular , OR |
| 19 | 800 mm x 600 mm rectangular, OR |
| 20 | 600 x 450 rectnagular |
| 21 | 600 mm x 600 mm, OR |
| 22 | 900 mm side octagon, OR |
| 23 | PROVIDING AND FIXING SEMI REFLACTIVE DIRECTION SIGNProviding and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 |
| 24 | PROVIDING AND FIXING OF LOGO OF PMGSY INFORMATION BOARDProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 25 | PROVIDING AND FIXING LOGO BOARD & Maintenance BordProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 26 | PROVIDING AND FIXING OF LOGO OF CITIZEN INFORMATION BOARDProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1Add Maintenance Board 1 Nos. |
| 27 | HUME PIPE CULVERT Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 28 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Bedding Below Pipe) |
| 29 | PCC GRADE M-15 IN HEAD WALL FOUNDATION Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (PCC M-15) ITEM 11.4 |
| 30 | PCC GRADE M-15 IN HEAD WALL Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (PCC M-15) ITEM 11.4 |
| 31 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 1000MM (SINGLE ROW) |
| 32 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 |
| 33 | Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 |
| 34 | RCC CULVERT Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 35 | PCC GRADE M-15 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 36 | PCC GRADE M-25 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 37 | Supplying, fitting, and placing HYSD bar (Fe 415) reinforcement in Substructure complete as per drawing and technical specifications Clauses 1002, 1005,1010 and 1202 |
| 38 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 |
| 39 | Plain/reinforced cement concrete in substurcture complete as per drawing and technical specification Clause 802,804,805,806,807,1202 and 1204. (RCC GRADE M-25) |
| 40 | Providing and alying reinforced cement concrete in superstructure as per drawing and technical specification Clause 800,1205.4 and 1205.5 (RCC M 25) |
| 41 | Supplying, fitting, and placing HYSD bar (Fe 415) reinforcement in Superstructure complete as per drawing and technical specifications Clauses 1002, 1005,1010 and 1202 (item 13.2) |
| 42 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 |
| 43 | protection work providing and laying boulder apron for bed protection with stone boulders of minimum size weight as par teble 1300,1 |
| 44 | Providing and laying boulder apron laid in wire crates with 4mm dia GI wire conforming to IS : 4826 in 100mm X 100 mm mesh (woven diagonally) including 10 parcent extra for laps and joints and joints laid with stone boulder weighting not less than 25 kg each per drawing and technical specification Clause 1301. |
| 45 | RCC BOX CELL CULVERT Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 46 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8( with local sand ) |
| 47 | Plain/reinforced cement concrete in substurcture complete as per drawing and technical specification Clause 802,804,805,806,807,1202 and 1204. (RCC GRADE M-15) |
| 48 | PCC GRADE M-25 Providing concrete for plain/reinforced concrete in Substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 49 | Providing and alying reinforced cement concrete in superstructure as per drawing and technical specification Clause 800,405.4 and 405.5 (RCC M 25) |
| 50 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 |
| 51 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 |
| 52 | Providing pressure relief pipe 100 mm dia in bottom slab of box cell on a filter media base of 500 mm x 500 as per drawing and technical specifications |
| 53 | protection work providing and laying boulder apron for bed protection with stone boulders of minimum size weight as par teble 1300,1 |
| 54 | Plain/reinforced cement concrete in substurcture complete as per drawing and technical specification Clause 802,804,805,806,807,1202 and 1204. (RCC GRADE M-15) |
| 55 | Supplying, fitting, and placing HYSD bar (Fe 415) reinforcement in Foundation, Substructure, Superstructure complete as per drawing and technical specifications Clauses 1002, 1005,1010 and 1202 (item 13.2) |
| 56 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 |
| 57 | TOTAL LABOUR CESS @ 1% = |
| 58 | SEIGNIORAGE FEE |
| 59 | TOTAL G.S.T. @ 18% = |
| 60 | I st Year |
| 61 | II nd Year |
| 62 | III rd Year |
| 63 | IV th Year |
| 64 | Vth Year |
| 65 | TOTAL LABOUR CESS @ 1% = |
| 66 | SEIGNIORAGE FEE |
| 67 | TOTAL G.S.T. @ 18% = Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender