Tender For Revival Of Godtola-Iv And Bahalpadar-Iii R/L Project Under Khariar Block In Nuapada Dist. Under State Plan 2026-27 (Package-39)
Tender Value
32.03 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
32036
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival Of Godtola-Iv And Bahalpadar-Iii R/L Project Under Khariar Block In Nuapada Dist. Under State Plan 2026-27 (Package-39)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in hard soil within initial lead of 30m & lift of 1.5m including dressing and levelling the bed and columns etc. |
| 2 | Earth work excavation of foundation in hard soil within initial lead of 50m & lift of 1.5m including dressing and levelling the bed etc.(Mechanical 60% & Manual 40%) |
| 3 | Filling in F&P with excavated materials including well watered and rammed. |
| 4 | Filling in F&P with excavated materials including well watered and rammed. (Mechanical 60% & Manual 40%) |
| 5 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 6 | Cement concrete (1:4:8) with 4cm size h.g.c.b. metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 7 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 8 | Brick work with Flyash. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 9 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 10 | Fly Ash.Brick in c.m.(1:6) in super structure. |
| 11 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge. |
| 12 | Labour charge for M.S. reinforcement for R.C.C. work including cutting bending, binding & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. |
| 13 | Cost of 45mm dia steel Pipe of length 6mtr |
| 14 | Cost of thick M.S Plate of 4mm thick of size 1.20mtrx0.90mtr =31.4kg*1.08=33.91kg |
| 15 | Cost of Stickering & lettering with radium boarder including cost of Fitting , fixing ,bracing & welding |
| 16 | Provision for foundation nut bolt |
| 17 | Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specifications including laying & fitting |
| 18 | Cost of 200 mm Ø PVC. pipe (Cl-II) 4.0 Kg/cm2 to deliver water at highest counter |
| 19 | Labour charges for laying and fitting of 200 mm Ø PVC pipe (C-I & C-II) |
| 20 | Cost of Transporation of 200mm PVC Pipe |
| 21 | Cost, supplying of 200mmx200mmx110mm dia Weidless G.I. Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 22 | Cost of 200 mm x200 mm x200 mm Ø PVC Equal Tee |
| 23 | 12.5 HP/9.375 KW Energy efficiency Monoblock pump set of total head 20 mtrs having discharge1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F'insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC power supplysuction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as perIS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete but excluding cost of GST |
| 24 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST |
| 25 | Cost of 63 Amp -400 V.T.P. Main Switch confirming to IS No.4064 |
| 26 | Cost of Motor Hood made out of 18 SWG gauge CR sheet |
| 27 | Base Plate made of MS Channel with holes |
| 28 | 6 KVAR Capacitor |
| 29 | Electrical Earthing |
| 30 | Cost of 3x16mm2 T.D. cable |
| 31 | Cost of 4mm2 PVC Wire |
| 32 | Cost of 100 mm Ø G.I. Pipe |
| 33 | 219 mm dia M.S.Pipe (6.30mm thickness) IS 3589:2001 with ISI mark of reputed company including all cost etc. |
| 34 | Cost of 100 mm Ø G.I. Bend |
| 35 | Cost of 100 mm Ø C.I. Foot Valve |
| 36 | Cost of 100 mm Ø G.I. Flange |
| 37 | Cost of 100 mm Ø Sluice Valve |
| 38 | Cost of 100 mm Ø C.I.Reflux Valve (NR) |
| 39 | Cost of 200 mm Ø PVC End Cap |
| 40 | Cost of 200 mm Ø PVC coupler (4 kg/cm2) |
| 41 | Cost of River Bank cutting & shaping for const. of P.F. |
| 42 | Cost, supplying of 50mm dia Kirloskar C.l. double Air Release Valve PN 1.6 with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark including all Taxes excluding cost of GST |
| 43 | Cost of 100x100x25mm G.I. Tee with Plug for priming |
| 44 | Cost of 200 mmx110 mm PVC/G.I./M.S. Reducer |
| 45 | Misc. Welding charges for \\"Z\\" joint, \\"S\\" bend, etc. |
| 46 | Cost of Cutting &Filling of trench for over burden earth and ridges of plots over and above standard estimate of trench for pipe laying |
| 47 | Cost for Electrical Installation & energisation & installtion of MB pump set with Trail run including fitting of Sluice Valve, NR valve, Butterfly Valve etc incluing labour cost and fitting materials. |
| 48 | Cost of solvent cement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender