Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #58508307

Tender For Providing Of Two Additional Gpe Room At Gandhinagar Under Ge (Af) Chiloda

Issued by Statutory Bodies & Commissions/Committees · Gandhinagar, Gujarat
Tender Value
42.84 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
85680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Providing Of Two Additional Gpe Room At Gandhinagar Under Ge (Af) Chiloda

BOQ

Name of Work:- PROVN OF TWO ADDITIONAL GPE ROOM AT GANDHINAGAR UNDER GE (AF) CHILODA
Sl. No. Item Description
1Demolition of cement concrete in reinforced any position (reinforcement cut as required to facilitate demolition) in ground floors / first floor complete all as specified
2Demolition of brickwork or stone/ boulder masonry, built in cement mortar,complete all as specified
3M&L Formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves inluding supports, overhangs etc also splays between floor and beams etc, flat & rough finished surface of concrete complete all as specified
4M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat & rough finished surface of concrete ,complete all as specified
5M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat & rough finished surface of concrete ,complete all as specified
6S&F Reinforcement steel (TMT Bar) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
7S&F Reinforcement steel (TMT Bar) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders ,complete all as specified
8M&L Reinforced Cement concrete (Design mix) M-25 (using 20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span ,complete all as specified
9M&L Reinforced Cement concrete (Design mix) M-25 (using 20 mm graded aggregate) for Columns, pillars, piers, posts and struts ,complete all as specified
10M&L Reinforced Cement concrete (Design mix) M-25 (using 20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ,complete all as specified
11M&L Brickwork with fly ash bricks old size bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in CM 1:6 ,complete all as specified
12M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement,complete all as specified
13M&L for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement,complete all as specified
14M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement ,complete all as specified
15M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered surfaces of wall ,complete all as specified Note : All work to be operated by mechanically (i.e Grinder Machine and Air less painting machine) not by blade / brush / roller / normal spray machine)
16All as per Item No: 15 but on ceiling ,complete all as specified Note : All work to be operated by mechanically (i.e Grinder Machine and Air less painting machine) not by blade / brush / roller / normal spray machine)
17Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.,complete all as specified Note : All work to be operated by mechanically (i.e Grinder Machine and Air less painting machine) not by blade / brush / roller / normal spray machine)
18M&L 50mm average thickness PCC 1:2:4 type B0 using 12.5mm graded aggregate as in padding and (roof levelling course) on roof surfaces complete all as specified. Note- Water proofing compound to be used @ 3% by weight of cement content for concrete padding work.
19M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wall mixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement.,complete all as specified Note - WPC shall be measured and paid separately.
20M&L for Atactic Polypropylene (APP) modified polymeric membrane waterproofing treatment to roofs (), completed in all respects as per directions of the Engineer-in-Charge:• Base Coat: Applying a uniform coat of hot industrial bitumen of Grade 85/25 at the rate of 1.20 kg/sqm over a clean, dry concrete surface.• Waterproofing Layer: Laying 3 mm thick APP modified membrane (weighing not less than 3.0 to 4.0 kg/sqm), with minimum 100 mm overlaps longitudinally and transversely, completely fused and sealed using an LPG gas torch.• Termination: Extending the membrane securely up to the full thickness of the roof slab or front fascia as directed.
21S&F false ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm consisting the thickness with semi perforated 10 to 12mm thick square edged of approved texture, design and patterns having moisture content less than 2%, Rh of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non- combustible as per BS 476 (part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 600 mm and secondary intermediate cross-T of size 24x26 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items i.e. 50 mm long, 8 mm outer diameter M-6 dash fastener 6 mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.30 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall metal wood grip screws. the work shall be carried out as per specifications, and as per directions of Engineer-in-Charge.complete all as specified
22S&F two track two Shutter panels acoustic aluminium sliding window Make Saint gobin, Jindal & equivalent with -Two Sash glazed made of frame 40x45mm, Glaze sash 27x65mm both having wall thickness of 1.4 ± 0.2mm and DGU Glass double glazing bead of appropriate dimension.
23S&F Acoustic glazed door comprising of Aluminium Make Saint gobin, Jindal & equivalent with multi- chambered frame 1 Glass Door Shutter with DGU Glass 6mm Clear Toughened + 10mm Air Gap + 6mm Clear Toughened(where ever required) extruded profiles glazing beads of appropriate dimension, G.I fasteners 80x8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Casement door with Butthinges made of (big series) Frame 40x40mm & Glass Door sash 70x40 mm all having wall thickness of 1.5 ± 0.2 mm and double glazing bead of appropriate dimension with mortize lock with L type Handle and cylinder lock with Key and as per directions of Engineer in-charge.
24S&F Gypserra™ C-stud Wall lining with Fultone tie includes 34x48x36x0.5mm Gypserra™ C-stud { Material-IS 513, Y/S - 300 Mpa, Finish - AZ150 (IS 15961)} placed at 297.5mm c/c in 32x50x32x0.5 mm Gypserra™ floorand ceiling channel { Material- IS 513,Y/S-300Mpa, finish - AZ150 (IS 15961}. Floor & Ceilling channel is anchored to the floor & True ceiling using Gyproc ® Rawl plug ø8x45mm {Material- IS 513 CR 1 grade, Zinc coating, Pull out load- 6.8kN for M30 concrete grade} /Hilti x- GN20MX anchor fasteners at 600mm c/c in center line manner. 50x32x32x0.5mm Gypserra™ floor channel to be cut & bend & bracing at every 1200mm c/c vertically. floor is channel is cut-band & fixed to brick wall Hilti HPS-1 (ø6x40mm) Impect anchor. Floor channel to be wrapped with 70µ self adhesive LDPE moisture barrier film to further improve corrosion resistance perfomance. A Gypserra™ noggin channel { Material-IS 513, Y/S -300Mpa, Finish-AZ150 (IS 15961)} of48x 0.5mm width has to provided at the horizontal joints of the two boards. Then resin bonded glass wool of 24kg/M3 and 50mm thick is placed between the studs and noggin channels, for NRC 0.85 - 0.88. Saint gobain Gyproc single layer of 12.5mm fultone tile of size 595x595mm having four squared edges, 18% perforation area of board & hole size of 9.7mm square shape with center borders of 48mm and side borders of 30mm, backed with non woven tissue, to be screw fixed with Gyproc ® Drywall screws of 25mm at minimum spacing of 300mm at center and 150mm at periphery. Finally edges are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Profill jonting compound Air Dry (Conforms to ASTM C475), Gyproc® Joint paper tape. The the junction of the partition with masonry & all penetration through the partition has to be treated with Hilti/Pyroplex fire and acoustic sealant, All other detailling and specifications to be followed as per approved drawing.
25M&L for interior/exterior wall finishing, including filling the joints, cracks, and surface imperfections with approved wall putty/filler, followed by one coat of primer, scraping and preparing the surface smooth, and finishing with two coats of plastic emulsion (water-soluble) paint of approved shade and manufacture to ensure an aesthetic look and long durability, complete all as specified .
26M & L for Vitrified Dark Shade / Double Charged / Ultracharged tiles 10mm thick, polished, of size exceeding 0.42 Sq.m and not exceeding 1 Sq.m, [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 25mm thick screed bed or bedding layer in CM 1:6 complete all as specified
27All as per item No 26 here in before, but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting ,complete all as specified
28M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified .
29M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings.
30M&L Sand filling under floors or in foundations including watering and consolidation all as specified and directed.
31M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 grade complete all as specified and directed.
32M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever omplete all as specified and as directed.
33M&L for preparation of new concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified.
34M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable 1100V grade drawn through and incl PVC concelled conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLSH cable 1100V grade as earth continuity wire incl modular sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for the following (a) One light point controlled by one switch complete all as specified
35One fan point controlled by one switch complete all as specified
36One 3 pin socket out let 5 Amps on the independent board,complete all as specified
37One 3 Pin socket out let 5 Amps on the same board,complete all as specified
38One bell/buzzer point controlled by one push type switch on indep board,complete all as specified
39All as per Ser Item No 34 here in before but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps..complete all as specified
40S&F Modular switch one way 6A,1 Module, complete all as specified
41S&F Modular switch one way 16A,1 Module, complete all as specified and directed.
42S&F Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed.
43S&F Modular socket 16/15A-2/3 pin combined 2 Module complete all as specified and directed.
44S&F Modular Fan Regulator, 120W, 2 module complete all as specified
45S&F Ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified
46S&F modular bell push 6A 1 module complete all as specified
47S&F Buzer, Ding Dong AC 230 Volts single pole complete all as specified
48M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 4 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit with accessories incl 4 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length,complete all as specified
49M & L for concealed sub main wiring complete with PVC insulated FRLSH cable of 2 run of single core 06 Sqmm 1100 volts grade with unseathead multistranded copper coductor (for phase and neutral) drawn through and including PVC med grade conduit with accessories and 1 run of 6 sqmm 1100 volts grade with unseathead multistranded FRLSH copper coductor (for earthing) complete all as specified and directed. (Note :- (a) two run of 6 Sqmm multistranded FRLSH copper conductor and one run of 6 Sqmm multistranded FRLSH copper conductor and one run of 20 mm dia med grade PVC conduit shall be measured and paid as one run length. colour coding for wiring shall be followed as per direction of Engr-in-Charge.
50S&F sheet metal enclosure for DBs of SPN 16 way with 200 Amps rated bus bar double door complete all as specified
51S&F Single pole and neutral enclosure with a two pin and earth plug socket complete with one single pole MCB of 20 Amp capacity complete all as specified
52S&F 240 Volt, 10 KA Ç' Curve MCB SPN of 20 Amps rating capacity complete all as specified
53S&F 240 Volt, 10 KA Ç' Curve MCB SP of 20 Amps rating capacity complete all as specified
54S&F 415 Volt, 10 KA Ç' Curve MCB TPN of 20 Amps rating capacity complete all as specified
55S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified
56S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified
57S&F LED lights fitting 1x 5 W, 220V, AC engaement light with driver, holder including LED bulb connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified
58S&F Ceiling fans complete with blades, down rods as per site requirement , and accessories, 1 Phase, 230 V, 50 Hz, AC, 1200 mm sweep. Min air delivery 210 CFM with brushless direct current motor (BLDC, including down rod, Nut,Bolt,Clamp, hold fastener) or hook complete all as specified
59M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6mm thick burried directly in ground not less that 2.25 m deep below normal ground level and top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical palte No 3 connected to earthing test point incl excavation, earth work in any type of soil strata, PCC chamber, 40 mm dia GI med grade pipe as protection of strip and 15 mm dia GI Med grade watering pipe, funnel, wire mesh etc including testing on completion all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58508307
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.84 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Two Additional Gpe Room At Gandhinagar Under Ge (Af) Chiloda
Basic Detail
Tender No 8534/26-27/E8
Bidding Type Tender
Location
City Gandhinagar
State Gujarat
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 42.84 Lakhs
Tender Fee 500
EMD 85680
Exemption Available
Document List
BOQ_895617.xls
c01c2372-1019-489b-97b1-a967b524a6f9.html
Tenderdocuments8534Revised.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895617.xls

html

c01c2372-1019-489b-97b1-a967b524a6f9.html

pdf

Tenderdocuments8534Revised.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender