Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58508282

Tender For Special Repair To Bldg No P-65 (Or Living Accn) Of 1St Sikkim Scouts At Algarah Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · pakyoung, Sikkim
Tender Value
24.22 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
48440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
pakyoung → Sikkim
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No P-65 (Or Living Accn) Of 1St Sikkim Scouts At Algarah Under Ge 867 Ews.

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO P-65 (OR LIVING ACCN) OF 1ST SIKKIM SCOUTS AT ALGARAH UNDER GE 867 EWS.
Sl. No. Item Description
1Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, etc. complete all as specified and as directed.
2S&F Pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed.
3S&F re painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed.
4Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), etc. complete all as specified and as directed.
5S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges, etc. complete all as specified and as directed.
6S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC drop ends (for spigot or socket ends) or nozzles, etc. complete all as specified and as directed.
7S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC stop ends (for spigot or socket ends) or nozzles, etc. complete all as specified and as directed.
8Dismantling wrought iron or mild steel work of any description not otherwise provided, etc. complete all as specified and as directed.
9S&F Mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165 , etc. complete all as specified and as directed.
10S&F Roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A), etc. complete all as specified and as directed.
11Demolition of reed, lathing, single or Double and plaster or chicken wire lathing on walls, etc. complete all as specified and as directed.
12M&L for Precast cement concrete block masonry with solid blocks type C-1 (1:3:6) (using 20mm graded stone aggregate) exc 10cm in width and setting in CM 1:6., etc. complete all as specified and as directed.
13Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided, etc. complete all as specified and as directed.
14M&L for RCC (Nominal mix) type B1 (1:2:4) (using 20mm graded aggregate) as in beams, lintels over 1.5m span, etc. complete all as specified and as directed.
15Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete, etc. complete all as specified and as directed.
16M&L for 10mm dia and over Mild steel TMT Bars cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), etc. complete all as specified and as directed.
17M&L for 6mm to 8mm mm dia and over Mild steel TMT Bars cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), etc. complete all as specified and as directed.
18Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
19M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished evern and smooth without using extra cement, etc. complete all as specified and as directed.
20M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated, etc. complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
21Supply only integral water proofing, etc. complete all as specified and as directed.
22M&L for Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty, etc. complete all as specified and as directed.
23M&L for Preparation of new plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, etc. complete all as specified and as directed.
24Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc. complete all as specified and as directed.
25M&L for 10 mm thick Virified Ceramic tiles (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in CM 1:6, etc. complete all as specified and as directed.
26M&L for 10 mm thick Virified Ceramic tiles (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm as in vertical suface like, dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10mm thick rendering in CM 1:4 , etc. complete all as specified and as directed.
27Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level, etc. complete all as specified and as directed.
28M&L for 75 mm thick PCC type C-2 (1:3:6) (40mm graded stone aggregate) as in path, plinth protection, etc. complete all as specified and as directed.
29M&L for Machine pressed chequered cement concrete tiles size 30cmx30cmx25mm thick and above, set jointed and pointed in neat slurry with grey cement and pigments in floors cut and polished, over and including 15mm thick screed bed or bedding layer in CM 1:6 mortar for laying floor finishes, etc. complete all as specified and as directed.
30M&L for PCC type C-2 (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work, etc. complete all as specified and as directed.
31M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends, etc. complete all as specified and as directed.
32Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets, etc. complete all as specified and as directed.
33S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre, etc. complete all as specified and as directed.
34S&F 6mm dia Hangers GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, etc. complete all as specified and as directed.
35M&L for 4mm thick Asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings, etc. complete all as specified and as directed.
36M&L for Preparation of AC Boards on ceiling surfaces and applying three coats of white wash, etc. complete all as specified and as directed.
37Taking down chowkhats or frame n.exc 1.50 and each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed.
38Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed.
39S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars, etc. complete all as specified and as directed.
40S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe.290.Gde-E-165, etc. complete all as specified and as directed.
41S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n.etc 0.5 sqm in each pane, etc. complete all as specified and as directed.
42S&F Pressed steel frames of size 165x60 mm for door with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete all as specified and as directed.
43S&F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specified hard & fitted to chowkats, etc. complete all as specified and as directed.
44S&F 125mm size butt hinges of Medium weight, cold rolled miled steel and fixed, etc. complete all as specified and as directed.
45S&F 140mm long Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, etc. complete all as specified and as directed.
46S&F 200mm size Aluminium anodised barrel tower bolts of extruded sections, etc. complete all as specified and as directed.
47S&F 150mm size Aluminium handle cast type anodised, etc. complete all as specified and as directed.
48S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, etc. complete all as specified and as directed.
49S&F 25mm dia decorative type curtain rod (curtain rails) of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and brackets fixed with wall flange and screws including takingdown existing curtain rods, etc. complete all as specified and as directed by Engr-in-Charge.
50M&L for Prepration of old painted steel surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints, etc. complete all as specified and as directed.
51M&L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying two coat of 1st grade enamel paint over a coate of red oxide primer zinc chrome, etc. complete all as specified and as directed.
52M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, etc. complete all as specified and as directed.
53S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed.
54S&F 110mm dia PVC (SWR) bends, etc. complete all as specified and as directed.
55Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, etc. complete all as specified and as directed.
56M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and plate for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch, etc. complete all as specified and as directed.NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.
57Description all as per item No 56.00 here in before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire, etc. complete all as specified and as directed.
58Description all as per item No 56.00 here in before but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane/Horizontal plane, with cables, 1.5 sq. mm size, etc. complete all as specified and as directed.
59Description all as per item No 56.00 here in before but for on independent board, etc. complete all as specified and as directed.
60Description all as per item No 56.00 here in before but for with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board, etc. complete all as specified and as directed.
61Description all as per item No 56.00 here in before but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size, etc. complete all as specified and as directed.
62S&F 5Amp Modular switch of piano type single pole one way flush type, white or ivory, ISI marked, etc. complete all as specified and as directed.
63S&F 15Amp Modular switch of piano type single pole one way flush type, white or ivory, ISI marked, etc. complete all as specified and as directed.
64S&F 5Amps Modular socket outlet 3 pin flush type, ISI marked, etc. complete all as specified and as directed.
65S&F 15Amps Modular socket outlet 6 or 5 pin and flush type, ISI marked, etc. complete all as specified and as directed.
66S&F 12W Lamp holder insulated,with LED lamp PVC / polycarbonate /bakelite body, etc. complete all as specified and as directed.
67S&F 65x50mm Ceiling rose surface bakelite three terminal, etc. complete all as specified and as directed.
68S&F 1x 20W Energy efficient LED tube lights fitting 4\\" 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, etc. complete all as specified and as directed.Make : Havells/Philips/Crompton
69S&F 15W LED round/square shape 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, etc. complete all as specified and as directed.
70S&F in repairs 30W LED Security light fitting of building with single piece new generation energy savng and environmental friendly, long life, , made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable, etc. complete all as specified and as directed.Make : Havells Cat No LHEXAY7PN6K030 or equivalent model of make Philips / Crompton Wipro/Surya
71S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, etc. complete all as specified and as directed.
72S&F MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, etc. complete all as specified and as directed.
73S&F MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, etc. complete all as specified and as directed.
74S&F Exhaust steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, etc. complete all as specified and as directed.
75Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC type C-1 (1:3:6), 50 mm thick pre cast RCC type B-1 (1:2:4) as cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed, etc. complete all as specified and as directed.
76M&L for Sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, etc. complete all as specified and as directed.Make of wire :- Havels,Finolex, RPG,Standard,HPL. Please Enable Macros to View BoQ information
77M&L for Sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, etc. complete all as specified and as directed.Make of wire :- Havels,Finolex, RPG,Standard,HPL. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58508282
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24.22 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No P-65 (Or Living Accn) Of 1St Sikkim Scouts At Algarah Under Ge 867 Ews.
Basic Detail
Tender No 8610/E8
Bidding Type Tender
Location
City pakyoung
State Sikkim
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 24.22 Lakhs
Tender Fee 500
EMD 48440
Exemption Available
Document List
BOQ_895676.xls
e823b618-bac9-4b6f-af7b-de26dcd4637c.html
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895676.xls

html

e823b618-bac9-4b6f-af7b-de26dcd4637c.html

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender