Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58507909

Tender For Comprehensive Repair To Certain Buildings, Internal Water Supply Pipe Lines Insulation, Puff Tank And Misc B/R Works In The Aor Of Age B/R-I Under Ge 865 Ews.

Issued by Statutory Bodies & Commissions/Committees · leh, Ladakh
Tender Value
44.50 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
89000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Comprehensive Repair To Certain Buildings, Internal Water Supply Pipe Lines Insulation, Puff Tank And Misc B/R Works In The Aor Of Age B/R-I Under Ge 865 Ews.

BOQ

Name of Work:- COMPREHENSIVE REPAIR TO CERTAIN BUILDINGS, INTERNAL WATER SUPPLY PIPE LINES INSULATION, PUFF TANK AND MISC B/R WORKS IN THE AOR OF AGE B/R-I UNDER GE 865 EWS.
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including wall cement mortar bedding (But not backing ) and rubbish of premises, complete all as specified and as directed.
2M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar, complete all as specified and as directed.
3M&L Light shade Vitrified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed in cement mortar (1:4) as in floors etc, complete all as specified and as directed.
4M & L glazed (coloured) ceramic tiles of size (350 x250mm) x 7 mm / 450mm x 300mm x 7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles, complete all as specified and as directed.
5Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete all as specified and as directed.
6M&L for Machine cut Kota stone slab flooring 18-25 mm thick over cement screed bed 15mm thick in CM 1:6, set and jointed in neat cement slurry laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.
7M&L for Granite of any type 16-18 mm thick over 15mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.
8Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level), complete all as specified and as directed.
9M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc, complete all as specified and as directed.
10M&L sand filling (25 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation, complete all as specified and as directed.
11M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade, complete all as specified and as directed.
12M&L for Chequred cement concrete tiles 30cm X 30cm X 20-25 mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 15mm thick cement screed base (1:6), complete all as specified and as directed.
13M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation, complete all as specified and as directed.
14M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and as directed.
15M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed.
16Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed
17M&L in repair for 9 mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.
18All as per item No. 17 here-in-before but on ceiling complete all as specified and as directed
19M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work, complete all as specified and as directed.
20All as per item No. 19 here-in-before but on ceiling, complete all as specified and as directed.
21M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding, complete all as specified and as directed.
22All as per item No. 21 here-in-before but on ceiling complete all as specified and as directed
23M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler o new surface with two or more coats complete all as specified and as directed.
24S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed.
25M & L 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws including Dismantlng complete all as specified and directed.
26Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton (framed work), complete all as specified and as directed.
27M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section, complete all as specified and as directed.
28M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section, complete all as specified and as directed.
29M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws, complete all as specified and as directed.
30Dismantling boarding / wooden floor of any description ,fixed in any positon with nails, complete all as specified and as directed.
31M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture, complete all as specified and as directed.
32Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed.
33M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6, complete all as specified and as directed.
34M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed
35M&L for 5mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and as directed
36M&L for three coats of white wash on newly plastered surfaces of ceiling incl preperaton complete all as specified and as directed
37M&L for preperation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.
38M & L Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls, complete all as specified and as directed.
39M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth over a coat of pink primer , complete all as specified and as directed.
40M&L for preperation of old wooden joinery, wall & ceiling surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamal paint e all as specified and as directed complete all as specified and as directed.
41M&L for preperation of old plastered wall surface of any description and applayng one coat of Oil bound destemper complete all as specified and as directed.
42M&L for preperation of old plastered wall surface of any description and applayng two coat of white wash complete all as specified and as directed.
43Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern, complete all as specified and as directed
44S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275, complete all as specified and as directed.
45All as per item No. 44 here-in-before but except sheeting.
46S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed
47All as per item No. 46 here-in-before but except sheeting any thickness.
48Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each, complete all as specified and as directed
49Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed
50Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and as directed
51All as per item No. 50 here-in-before but but n'exc 1.0 sqm.
52Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads, complete all as specified and as directed
53M&L sheet glass 4.8 mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane, complete all as specified and as directed
54M&L sheet glass 4.8mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane, complete all as specified and as directed
55Anodised aluminium frame of standerd section for doors, windows, ventilators with double rebates including joining cleat for fixing etc, complete all as specified and as directed
56M&Lfor Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately), complete all as specified and as directed
57M&Lfor Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately), complete all as specified and as directed
58S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed (Glass shall be measured Seperately), complete all as specified and as directed
59S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165, complete all as specified and as directed
60Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed.
61S&F for 35mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats, complete all as specified and as directed
62S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats, complete all as specified and as directed.
63S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window/ventilator shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats, complete all as specified and as directed
64S&F mild steel butt hinges, medium weight cold rolled 100mm size, complete all as specified and as directed
65S&F stainless steel butt hinges, medium weight cold rolled 100mm size, complete all as specified and as directed
66S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed
67S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed.
68S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, complete all as specified and as directed.
69S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and as directed
70S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 25 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as specified and as directed
71S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 32 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as specified and as directed
72S&F in repair 25mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site, complete all as specified and as directed
73S&F in repair 32mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site, complete all as specified and as directed
74S & F 250 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store n.exc 250 ltrs capacity, complete all as specified and as directed
75S & F 500 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store Exc 250 and n exc 500 ltrs capacity, complete all as specified and as directed
76S & F 1000 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store Exc 500 and n exc 1000 ltrs capacity, complete all as specified and as directed
77S & F rotational moulded HDPE water storage tanks 500 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 500 ltrs capacity, complete all as specified and as directed
78S & F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 500 ltrs capacity, complete all as specified and as directed
79S & F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.
80S&F in repair 25mm outer dia PPR Ball valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site, complete all as specified and as directed
81S & F in repairs Fancy type 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
82S & F in repair fancy type 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
83S & F in repair fancy type ,chromium plated 20 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
84S & F in repair fancy type ,chromium plated 20 mm bore angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
85S & F in repair 15mm bore dia Bib tap of PTMT any color high pressure screwed for iron pipe and fixed (min weight- 90 gms), complete all as specified and as directed
86S & F in repair 15mm bore stop valve standard of PTMT any color high pressure screwed for iron pipes and fixed at positio (Min wt 90 gms), complete all as specified and as directed
87S & F in repair 15mm bore angle stop valve standard of PTMT any color high pressure screwed for iron pipes and fixed (Min wt 90 gms), complete all as specified and as directed
88S & F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe for sinks / wash hand basins complete all as specified and directed.
89S & F in repairs Vitreous china wash basin white flat back size 550 x 400 mm excluding taps, waste,chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and as directed
90S&F in repairs viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe) but including connection to 100mm dia trap 'P' or 'S', anti syphonage pipe etc, complete all as specified and as directed
91S&F in repairs, 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both end, complete all as specified and as directed
92S&F in repairs, 15 mm bore, PVC connection pipe 450 mm long with PTMT nuts at both ends complete all as specified and directed.
93S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level ,white ,with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC 32mm dia,for low level cister, complete all as specified and as directed
94S & F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement complete all as specified & directed.
95S & F in repair acrylic PVC bathroom cabinet of size 550 x 400 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves in side the cabinet of superior quality as approved, complete all as specified and as directed
96S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed
97S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed
98S & F in repair CP floor gratings 150mm dia, complete all as specified and as directed
99S & F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.
100S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed
101Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc, complete all as specified and as directed
102M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and as directed
103All as per item No. 102 here-in-before but except blocks.
104M&L for soak well/soak pit of dia 3.00 mtr internal at top and depth of 1.80 mtr from botton having min 2.45 mtr height 380 mm thick random rubble uncoarsed stone masonary wall in CM 1:6 with 150 mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) below stone masonary at Bottom and RCC coverslab using Design mix concrete M-25 or 1:1.5:3 nominal mix with reinforcement 10 mm dia bars @ 150mm C/C both ways top and bottom layer of concrete including arrangement for manhole opening and manhole cover, inlet for 100/150 mm dia pipe connected with existing manholes including dismantling and filling of existing soak well/soal pit and make a true surface complete all as specified as per Drg No. CESZ/TD-1078/2011 sheet 1/1Note :- The rate includes excavation in hard/dense soil and construction of soak well as per drawing, connection of inlet pipe, 100 mm dia PVC vent pipe with cowel, returning and filling and removing of surplus soil to a distance exc 50 mtr but not exc 100 mtr from site. If any issues regarding drawing finalized by Engr in Charge during execution.
105Desludging/cleaning including dewatering of septic tank/soak well/manholes in any dia and depth exc 1.5 mtr but not exc 3.00 mtr for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, scouring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine.(b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site.(c) Manual cleaning operation/scavenging is prohibited.(d) The unit rate shall deem to include for all materials, labour of skilled/unskilled, tools and plants and requisite quantity of water for the entire operation and transportation arrangements.(e) The measurement shall be included with depth of water and sludge/silt/mud.Responsiblity of Bidder :- (i) The successful bidder should be Liaise with Leh, Municipal authority and shall take written permission for disposal of faecal sludge/soil . No extra cost will be provided for same.OR Bidder must have own/ lease, land /plot register from UT Leh, and obtain permission / NOC from Leh, Municipal authority for disposal of faecal sludge/soil at his land. Same shall be submit to the department before start the work. No extra cost will be provided for same.
106S&F 110mm dia bore PVC pipes single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber ring joints , laid in trenches or in floors including PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) bed to drain including dismantling of cast iron/ PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed.
107S&F 110mm bore PVC (SWR) pipe bends any radius complete all as specified and directed.
108S&F 75mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber joints fixed to walls complete all as specified and directed.
109S&F 75mm bore PVC (SWR) pipe bends complete all as specified and directed.
110S&F PVC reducer of 110mm dia complete all as specified and directed by Engr-in-Charge.
111S&F PVC reducer of 75mm dia complete all as specified and directed.
112S&F PVC (SWR) single junction (Single T) of 110mm dia complete all as specified and directed.
113S&F PVC (SWR) single junction (Single T) of 75mm dia complete all as specified and directed.
114M&L for cleaning of septic tanks and soakage wells/pit any position (any capacity) at various location/ unit under AGE B/R I by desludging sludge and removing of soil/silt/grit/ sludge waste material etc.through sewer suction machine( Honey sucker truck, minimum capacity of 6000 ltrs ) including cost of fuel, lubricant, driver and co-driver, safaiwala required as per site requirement alongwith honey sucker vehicle and disposal of faecal sludge out side of defence land.Note :-Specification of sewer suction machine :- Minimum Capacity 6000 Ltrs, Type chasis mounted with hydralic facility, suction head maximum 10 Mtr Responsiblity of Bidder :- (i) Bidder/Owner shall send driver and safaiwala to take compaint slip along with separate register at office of AGE B/R-I daily including sunday and holidays or any time as per requirement to operate honey sucker machine and they will follow direction of Engr -in-charge. (ii) For each load shall be of 6000 Ltrs faecal sludge
115Providing and fixing 100mm thick Insulation of water tank 500ltr including inlet and outlet of suitable dia complete all as specified and directed which includes of following items:- Nitrile sheet 19mm Rock wool Wire mesh Polythene Cello tape Aluminum sheet 28 gauge
116Providing and fixing 100mm thick Insulation of water tank 1000ltr including inlet and outlet of suitable dia complete all as specified and directed by Engr in Charge which includes of following items:- Nitrile sheet 19mm Rock wool Wire mesh Polythene Cello tape Aluminum sheet 28 gauge
117Providing 50mm thick insulation of water pipe line 20/25/32 mm dia pipe complete all as specified and directed by Engr in Charge. which includes of the following:- Export quality heat traceable (heat tape) , self regulating and auto cut with thermostate system Aluminum tape K. Flex 19mm Rock wool Wire mesh Polythene Cello tape Aluminum sheet 28 gauge
118Deduct Schedule of Credit of Rs (-) 51265.50 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58507909
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 44.50 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Comprehensive Repair To Certain Buildings, Internal Water Supply Pipe Lines Insulation, Puff Tank And Misc B/R Works In The Aor Of Age B/R-I Under Ge 865 Ews.
Basic Detail
Tender No 865/EWS(NIT-141/2026-27
Bidding Type Tender
Location
City leh
State Ladakh
Key Dates
Publish Date 12 Nov 2026
Submission Date 04 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 44.50 Lakhs
Tender Fee 500
EMD 89000
Exemption Available
Document List
BOQ_895459.xls
f812a799-d96a-4101-92bc-f4d245240e6d.html
TENDERNIT_141.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895459.xls

html

f812a799-d96a-4101-92bc-f4d245240e6d.html

pdf

TENDERNIT_141.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender