Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58507904

Tender For Maintenance/ Renewal/ Replacement Of Submain Wiring,Spn/Tpn Dbs, Mcbs Under Age E/M-I Of Ge 865 Ews.

Issued by Statutory Bodies & Commissions/Committees · leh, Ladakh
Tender Value
46.50 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Maintenance/ Renewal/ Replacement Of Submain Wiring,Spn/Tpn Dbs, Mcbs Under Age E/M-I Of Ge 865 Ews.

BOQ

Name of Work:- MAINTENANCE/ RENEWAL/ REPLACEMENT OF SUBMAIN WIRING,SPN/TPN DBS, MCBS UNDER AGE E/M-I OF GE 865 EWS.
Sl. No. Item Description
1Replacement of MCB DB, TPN, 4 way sheet metal enclosures double door 415 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
2Replacement of MCB DB, TPN, 8 way sheet metal enclosures double door 415 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
3Replacement of sheet metal enclosure VTPN DBs with 200 Amps rated bus bar of 8 way 415 volts with blank plate complete with double doo with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
4MCB, TPN, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.
5Replacement of sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 20 Amp 240 volt complete all as directed.
6MCB, SPN, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.
7MCB, SP, AC, 240 volts \\"C\\" series capacity of 6-32 Amps, 10kA and making connections, complete all as specified & directed.
8MCB, TP, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.
9MCB, 4P, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.
10Takingn down old unservicecable heating pillar rod of any make and capacity & supply and fix in replacement heating pillar rod as existing upto 2000 watt, 230 Volts, complete all as specified and directed.
11M & L for Rewinding of burnt windings of Exhaust fans of size 380-450 mm size including dismantling from loc and removing the burnt out winding , cleaning the stator with CTC solution to remove the burnt slots. Rewinding the same with new super enamelled copper wire same gauge and size /number of turns , varnishing the winding completely and reassembling, complete all as specified and directed.
12M & L for Rewinding of burnt windings of Exhaust fans of size 380-450 mm size including dismantling from loc and removing the burnt out winding , cleaning the stator with CTC solution to remove the burnt slots. Rewinding the same with new super enamelled copper wire same gauge and size /number of turns , varnishing the winding completely and reassembling, complete all as specified and directed.
13M & L for Rewinding of burnt windings of Exhaust fans of size 250-300 mm including dismantling from loc and removing the burnt out winding , cleaning the stator with CTC solution to remove the burnt slots. Rewinding the same with new super enamelled copper wire same gauge and size /number of turns , varnishing the winding completely and reassembling, complete all as specified and directed.
14M&L for replacement of louvers made out of metal sheets suitable for 350 to 450 mm sweep exhaust fans complete all as specified and directed.
15supply and fix Flexible 1.5Sqmm twin twisted copper wire two core of size 23/0.0076mm including all electical connection complete all as specified and directed.
16supply and fix Ball bearing suitable for Exhaust fan 380mm - 450mm sweep any make complete all as specified and directed.
17Supply and fix Ball bearing suitable for Exhaust fan up to 300 mm sweep any make complete all as specified and directed.
18Supply and fix Condensor 2.5 MFD 230 V suitable for Exhaust fan of any sweep/size complete all as specified and directed.
19Supply and fix Condensor 4 MFD 230 V suitable for Exhaust fan of any sweep/size complete all as specified and directed.
20Supply and fix Gun metal Bushings suitable for exhaust fan of size up to 300 mm sweep any make complete all as specified and directed.
21Supply and fix Gun metal Bushings suitable for Exhaust fan of size up to 450mm mm sweep any make complete all as specified and directed.
22M & L for Cutting of hole of shape of round/square on wall / window of size 250/300/380/450mm sweep size and making good with existing surfaces (as before) completed all as specified and directed.
23Supply and fixing in replacement of exhuast fan any type and size with Plastic body 300 mm sweep including taking down the existing unserviceable exhuast fan and making necessary arrangements for fixing of plastic body 300 mm sweep and connectioning with flexible three core cable from the ceiling rose complete all as directed.
24Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep, complete all as specified and directed.
25Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete all as specified and directed.
26Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead all as specified and directed for One light/fan/exhaust fan point controlled by one way switch, complete all as specified and directed.
27All as per item No. 26 here -in-before but for One switch socket outlet 6 Amps, 230 volts point on Same board.
28All as per item No. 26 here -in-before but for One switch socket outlet 6 Amps, 230 volts point on independent board.
29All as per item No. 26 here -in-before above but for power point using cables 4 Sq mm size.
30Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC conduit with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead all as specified and directed for One light/fan/exhaust fan point controlled by one way switch, complete all as specified and directed.
31All as per item No. 30 here -in-before but for One switch socket outlet 6 Amps, 230 volts point on Same board
32All as per item No. 30 here -in-before but for One switch socket outlet 6 Amps, 230 volts point on independent board
33All as per item No. 30 here -in-before but for power point but using cables 4 Sq mm size
34Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.
35Switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as directed.
36Switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed.
37Supply only insulaltion tape 25 Mtrs long, complete all as specified and directed.
38Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings, complete all as specified and directed.
39S&F Buzzer,Ding Dong AC.230 Volts,single pole, complete all as specified and directed.
40S&F for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 2 x 2.5 sq. mm +1x 2.5 sq. mm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in required in existing surpace recessed PVC conduit incl taking down old one complete all as specified and directed.
41All as per item No. 40 here -in-before but size 2 x 4 sq. mm +1x 4 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.
42All as per item No. 40 here -in-before but size 2 x 6 sq. mm +1x 6 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.
43All as per item No. 40 here -in-before but size 2 x 10 sq. mm +1x 10 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.
44All as per item No. 40 here -in-before but size 2 x 16 sq. mm +1x 16 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.
45Supply and fixing LED attractive and decorative strip type Warm lights 11/15 watts,system Lumen Efficiency>110 Lm/W operating voltage between 140-270 Vac, power factor more thn 0.90% LED driving current<70% of rated maximum forward current, THD less than 20% CRI more than 80%,Luminaire intergal driver with 2 KV surge protection, overload protection,No load protection and BIS marking (Ref no for Driver),Driver certification IEC6437-2-13 IS (15885) Over all electrical Eficiency more than 90%, driver electrical efficiency will be>85%..(Note:- Each strip have minimum 5 Mtr length, seperate led driver and seperate wiring.of 2 core 23/0.0076 Size upto 5 mtr for connection complete all as specified and directed .(The point wiring and swithes measured seperately.)
46Supply and fix in repair gang box 2 module for mounting of switch and socket fush type 230 volts, complete all as specified and as directed.
47Supply and fix in repair gang box 3 module for mounting of switch and socket fush type 230 volts, complete all as specified and as directed.
48Supply and fix in repair gang box 4 module for mounting of switch and socket fush type 230 volts, complete all as specified and as directed.
49Supply and fix in repair gang box 6 module for mounting of switch and socket fush type 230 volts, complete all as specified and as directed.
50Supply and fix in repair gang box 8 module for mounting of switch and socket fush type 230 volts, complete all as specified and as directed.
51Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as directed, complete all as specified and as directed.
52M&L for Modular switch colour white/Golden Pecan one way single pole 6 Amp 1 module 240 volts. Make : Anchor/Havells/Cona
53M&L for Modular switch colour white/Golden Pecan one way single pole 16 Amp 1 module 240 volts, complete all as specified and as directed.
54S&F for Modular colour white/Golden Pecan socket 6/16 A -2/3 Pin combined 2 module 240 Volt, complete all as specified and as directed.
55S&F in replacement Modular socket colour white/Golden Pecan 6 A -2/3 Pin combined 2 module 240 Volt, complete all as specified and as directed.
56S&F for modular white/Golden Pecan cover plate with frame 1 module, complete all as specified and as directed.
57S&F for modular white/Golden Pecan cover plate with frame 2 module, complete all as specified and as directed.
58S&F for modular white/Golden Pecan cover plate with frame 3 module, complete all as specified and as directed.
59S&F for modular white/Golden Pecan cover plate with frame 4 module, complete all as specified and as directed.
60S&F for modular white cover/Golden Pecan plate with frame 6 module, complete all as specified and as directed.
61S&F for modular white/Golden Pecan cover plate with frame 8 module, complete all as specified and as directed.
62Supply and fixing PVC Gang box with switch socket combination 2 in 1, 3 pin 5 & 15 Amp flush type universal, complete all as specified and as directed.
63Supply and fixing PVC Gang box with switch socket combination 2 in 1, 3 pin 5 Amp flush type universal, complete all as specified and as directed.
64S & F 5W LED Bulb including taking down old one, complete all as specified and as directed.
65S & F 7W LED Bulb including taking down old one, complete all as specified and as directed.
66S & F 9W LED Bulb including taking down old one, complete all as specified and as directed.
67Taking down od unserviceable switch socket combination and supply and fix in replacement of switch socket combination out let two in one 5 pin 6 Amps with box 230 Volts complete all as specified and directed.
68Taking down od unserviceable switch socket combination and supply and fix in replacement of switch socket combination out let multipurpopose 5 pin 6/16 Amps with box, 230 Volts complete all as specified and directed.
69S&F in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED tube light 20 Watt LED Cool white with , extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driverand making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
70S&F in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED tube light 20 Watt LED Warm white with , extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driverand making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
71S&F in replacement of LED single tube light fitting surface / pendent mounting complete with batten for LED tube light 10 Watt LED warm white with , extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driverand making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
72Supply & Fixing in replacement of surface mounted Bulk Head fitting Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 Wattand making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
73Supply and fix in repair round ultra sleek surface mounted slim aluminium body LED downlight 18 wattsand making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
74Supply and fix in repair square ultra sleek surface mounted slim aluminium body LED downlight 24 wattsand making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
75S & F Plug Top 15 Amps suitable for working on 230 volts 50 Hz AC supply complete all as specified and directed.
76S & F hylem sheets uitable for switch boards of different size complete all as specified and directed.
77S & F casing capping of 20mm width complete all as specified and directed.
78S & F casing capping of 25mm width complete all as specified and directed.
79S & F casing capping of 30mm width complete all as specified and directed.
80Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
81S&F in replacement of geyser assembly suitable for water heater of capacity upto 25 Ltrs to fix thermostat , heating element as of the existing model & size including all clamps with bolts and nuts etc, complete all as specified and as directed.
82Taking down old unserviceabe thermostat and supplly and fix in replacement termostat autocut type suitable for water heater of capacity upto 25 Ltrs complete all as specified and directed.
83S&F in replacement of heating element 2000 watt capacity triangular type, complete all as specified and as directed.
84S&F in replacement of heating element 1500 watt capacity triangular type complete, complete all as specified and as directed.
85S&F PVC connections 15 mm size(for hot water and cold water) with PTMT nuts of length 450 mm long, complete all as specified and as directed.
86S & F temperature and pressure valve Sutaible for Geyser 25/50 Ltrs, complete all as specified and as directed.
87Supply and fix stainless steel inner tank for 25 ltr storage type water heater, complete all as specified and as directed.
88Supply and fix outer tank for 25 ltr storage type water heater complete all as specified and directed. .
89S&F in replacement of light indicator (Red & Green colour) suitable for 25/50 ltrs water heater complete all as specified and as directed.
90S & F Plug Top 6 Amps suitable for working on 230 volts 50 Hz AC supply complete all as specified and directed.
91Deduct Schedule of Credit of Rs (-) 83330.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58507904
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.50 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Maintenance/ Renewal/ Replacement Of Submain Wiring,Spn/Tpn Dbs, Mcbs Under Age E/M-I Of Ge 865 Ews.
Basic Detail
Tender No 865/EWS(NIT-143/2026-27
Bidding Type Tender
Location
City leh
State Ladakh
Key Dates
Publish Date 12 Nov 2026
Submission Date 04 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 46.50 Lakhs
Tender Fee 500
EMD 93000
Exemption Available
Document List
BOQ_895410.xls
e6e2594e-7e80-4fd7-9272-d0f91a01919a.html
TENDERNIT_143.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895410.xls

html

e6e2594e-7e80-4fd7-9272-d0f91a01919a.html

pdf

TENDERNIT_143.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender