Health and Family Welfare Government Departments Closing in 7 days TDR #58507229

Tender For Supply Of Power Laundry Machines , Washer Extractor 30 Kg , Washer Extractor 60 Kg , Drying Tumbler 25 Kg , Drying Tumbler 50 Kg , Suitable Capacity Air Compressor , Flat Work Ironer (Calendering Machine) , Vacuum Ironing Table With Portable Bo

Issued by Government Departments · Thiruvananthapuram, Kerala
Tender Value
35.80 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
35900
Bank guarantee accepted
Document Fee
6372
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Supply Of Power Laundry Machines , Washer Extractor 30 Kg , Washer Extractor 60 Kg , Drying Tumbler 25 Kg , Drying Tumbler 50 Kg , Suitable Capacity Air Compressor , Flat Work Ironer (Calendering Machine) , Vacuum Ironing Table With Portable Boiler (Not Taken For Evaluation) , Washroom Trolley (Not Taken For Evaluation) , Dry Linen Trolley (Not Taken For Evaluation) , Shelf Trolley (Not Taken For Evaluation) , Shelf Big (Not Taken For Evaluation) , Shelf Small (Not Taken For Evaluation) , Civil Works : Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below (Not Taken For Evaluation Comp 12 To Comp 60) , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area Beyond 3 Sq. Metres , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Dismantling Old Electrical Points, Wiring, Lights And Handing Over The Same To The Hospital Authorities , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Upto 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed : All Kinds Of Soil , Providing Cable Trench For System Cables And Wherever Necessary With Metal Cover Including Finishing Works And All Allied Works , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size). , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Up To Plinth Level. Thermo-Mechanically Treated Bars. , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. (Grills For Drainage) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Plastering With Cement Mortar 1:3 ( 1Cement, 3 Sand) 9Mm Thick Two Coats, First Coat And A Flushing Coat Of Neat Cement Slurry Including Cost And Conveyance Of All Materials To Site, Labour Charges, Hire Charges For Scaffolding, Watering For Curing Etc. Complete For All Floors For All Heights. (For Floor Finish) , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorptions Less Than 0.08%And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : One Or More Coats On Old Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : One Or More Coats On Old Work , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 25 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 32 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 40 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 75 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 110 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 150 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Constructing Soak Pit 1.20X1.20X1.20M Filled With Brickbats Including S.W. Drain Pipe 100 Mm Diameter And 1.20 M Long Complete As Per Standard Design. , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 32 Mm Dia , Providing And Laying Rectified Glazed Ceramic Floor Tiles 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours White, Ivory, Rey, Fume Red Brown, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. , Supplying And Fixing Of Following Ways Surface/ Recess Mounting, Vertical Type, 415 Volts, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 Amps Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs (But Without Mcbs And Incomer ) As Required . (Note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required.) 4 Way (4 + 12), Double Door , Supplying And Fixing Of Following Ways Surface/ Recess Mounting, Vertical Type, 415 Volts, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 Amps Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs (But Without Mcbs And Incomer ) As Required . (Note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required.) 8 Way (4 + 24), Double Door , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 3.5C 50 Sq.Mm Al , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 3.5C 35 Sq.Mm Al , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 4C 16 Sq.Mm Al , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 4C 10 Sq.Mm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3.5C 50Sqmm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3.5C 35Sqmm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 4C 16Sqmm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 4C 10Sqmm Al , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series With Metal Type Enclosure As Required. 100A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series With Metal Type Enclosure As Required. 63A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series With Metal Type Enclosure As Required. 20A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 125A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 100A 3Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 63A 3Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 20A 3Pole C Curve , Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Supply And Laying Bare Earthing Conductors Of The Following Sixes Along With Wiring/ Cables And Giving Connection As Required. 3.15Mm Copper Conductor (10 Swg) , Supply And Laying Bare Earthing Conductors Of The Following Sixes Along With Wiring/ Cables And Giving Connection As Required. 4Mm Copper Conductor (8 Swg) , Providing And Laying Earth Connection From Earth Electrode With 4.00 Mm Dia Copper Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Copper Thimble Excavation And Re-Filling As Required.

BOQ

Name of Work:-
Sl. No. Item Description
1Washer extractor 30 Kg
2Washer extractor 60 Kg
3Drying tumbler 25 Kg
4Drying tumbler 50 Kg
5Suitable capacity air compressor
6Flat work Ironer (Calendering machine)
7Vacuum ironing table with portable boiler (not taken for evaluation)
8Washroom trolley (not taken for evaluation)
9Dry linen trolley (not taken for evaluation)
10Shelf trolley (not taken for evaluation)
11Shelf big (not taken for evaluation)
12shelf small (not taken for evaluation)
13CIVIL WORKS : Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (Not taken for evaluation comp 12 to comp 60)
14Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres
15Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
16Dismantling old electrical points, wiring, lights and handing over the same to the hospital authorities
17Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
18Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
19Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
20Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed : All kinds of soil
21Providing cable trench for system cables and wherever necessary with metal cover including finishing works and all allied works
22Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
23Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars.
24Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Grills for drainage)
25Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
26Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
2712 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
28Plastering with cement mortar 1:3 ( 1cement, 3 sand) 9mm thick two coats, first coat and a flushing coat of neat cement slurry including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding, watering for curing etc. complete for all floors for all heights. (For floor finish)
29Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
30Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work
31Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
32Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 25 mm dia 10Kgf/cm2- Internal work - Exposed on wall
33Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
34Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 40 mm dia 10Kgf/cm2- Internal work - Exposed on wall
35Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 75 mm dia 10Kgf/cm2- Internal work - Exposed on wall
36Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 110 mm dia 10Kgf/cm2- Internal work - Exposed on wall
37Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 150 mm dia 10Kgf/cm2- Internal work - Exposed on wall
38Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
39Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia
40Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Rey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
41Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door
42Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door
43Supply and laying of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. On wall/surface 3.5C 50 Sq.mm Al
44Supply and laying of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. On wall/surface 3.5C 35 Sq.mm Al
45Supply and laying of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. On wall/surface 4C 16 Sq.mm Al
46Supply and laying of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. On wall/surface 4C 10 Sq.mm Al
47Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C 50sqmm Al
48Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C 35sqmm Al
49Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4C 16sqmm Al
50Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4C 10sqmm Al
51Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series with metal type enclosure as required. 100A 4pole C curve
52Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series with metal type enclosure as required. 63A 4pole C curve
53Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series with metal type enclosure as required. 20A 4pole C curve
54Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series in the existing VDB. 125A 4pole C curve
55Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series in the existing VDB. 100A 3pole C curve
56Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series in the existing VDB. 63A 3pole C curve
57Supply and fixing of following rating, 10 KA, Miniature circuit breakers of the following series in the existing VDB. 20A 3pole C curve
58Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
59Supply and laying bare earthing conductors of the following sixes along with wiring/ cables and giving connection as required. 3.15mm copper conductor (10 SWG)
60Supply and laying bare earthing conductors of the following sixes along with wiring/ cables and giving connection as required. 4mm copper conductor (8 SWG)
61Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58507229
AUTHORITY Government Departments
TENDER VALUE 35.80 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Kerala Medical Services Corporation Limited
Work Description Tender For Supply Of Power Laundry Machines , Washer Extractor 30 Kg , Washer Extractor 60 Kg , Drying Tumbler 25 Kg , Drying Tumbler 50 Kg , Suitable Capacity Air Compressor , Flat Work Ironer (Calendering Machine) , Vacuum Ironing Table With Portable Boiler (Not Taken For Evaluation) , Washroom Trolley (Not Taken For Evaluation) , Dry Linen Trolley (Not Taken For Evaluation) , Shelf Trolley (Not Taken For Evaluation) , Shelf Big (Not Taken For Evaluation) , Shelf Small (Not Taken For Evaluation) , Civil Works : Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below (Not Taken For Evaluation Comp 12 To Comp 60) , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area Beyond 3 Sq. Metres , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Dismantling Old Electrical Points, Wiring, Lights And Handing Over The Same To The Hospital Authorities , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Upto 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed : All Kinds Of Soil , Providing Cable Trench For System Cables And Wherever Necessary With Metal Cover Including Finishing Works And All Allied Works , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size). , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Up To Plinth Level. Thermo-Mechanically Treated Bars. , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. (Grills For Drainage) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Plastering With Cement Mortar 1:3 ( 1Cement, 3 Sand) 9Mm Thick Two Coats, First Coat And A Flushing Coat Of Neat Cement Slurry Including Cost And Conveyance Of All Materials To Site, Labour Charges, Hire Charges For Scaffolding, Watering For Curing Etc. Complete For All Floors For All Heights. (For Floor Finish) , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorptions Less Than 0.08%And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : One Or More Coats On Old Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : One Or More Coats On Old Work , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 25 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 32 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 40 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 75 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 110 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 150 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , Constructing Soak Pit 1.20X1.20X1.20M Filled With Brickbats Including S.W. Drain Pipe 100 Mm Diameter And 1.20 M Long Complete As Per Standard Design. , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 32 Mm Dia , Providing And Laying Rectified Glazed Ceramic Floor Tiles 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours White, Ivory, Rey, Fume Red Brown, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. , Supplying And Fixing Of Following Ways Surface/ Recess Mounting, Vertical Type, 415 Volts, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 Amps Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs (But Without Mcbs And Incomer ) As Required . (Note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required.) 4 Way (4 + 12), Double Door , Supplying And Fixing Of Following Ways Surface/ Recess Mounting, Vertical Type, 415 Volts, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 Amps Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs (But Without Mcbs And Incomer ) As Required . (Note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required.) 8 Way (4 + 24), Double Door , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 3.5C 50 Sq.Mm Al , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 3.5C 35 Sq.Mm Al , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 4C 16 Sq.Mm Al , Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium /Copper Conductor Cable Conforming To Is 7098 (Part 1) Amended Upto Date. On Wall/Surface 4C 10 Sq.Mm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3.5C 50Sqmm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3.5C 35Sqmm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 4C 16Sqmm Al , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 4C 10Sqmm Al , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series With Metal Type Enclosure As Required. 100A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series With Metal Type Enclosure As Required. 63A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series With Metal Type Enclosure As Required. 20A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 125A 4Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 100A 3Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 63A 3Pole C Curve , Supply And Fixing Of Following Rating, 10 Ka, Miniature Circuit Breakers Of The Following Series In The Existing Vdb. 20A 3Pole C Curve , Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Supply And Laying Bare Earthing Conductors Of The Following Sixes Along With Wiring/ Cables And Giving Connection As Required. 3.15Mm Copper Conductor (10 Swg) , Supply And Laying Bare Earthing Conductors Of The Following Sixes Along With Wiring/ Cables And Giving Connection As Required. 4Mm Copper Conductor (8 Swg) , Providing And Laying Earth Connection From Earth Electrode With 4.00 Mm Dia Copper Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Copper Thimble Excavation And Re-Filling As Required.
Basic Detail
Tender No KMSCL/EP/607(R)/2026
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 12 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 35.80 Lakhs
Tender Fee 6372
EMD 35900
Exemption Available
Document List
7921e363-25a8-41d6-8aab-4e2021e6c3ae.html
BOQ_1517047.xls
PowerLaundryMachines.pdf
Supplierdetails.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

7921e363-25a8-41d6-8aab-4e2021e6c3ae.html

xls

BOQ_1517047.xls

pdf

PowerLaundryMachines.pdf

xls

Supplierdetails.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender