Tender For Establishment Of Fish Landing Center At Panidwara In Khordha District, Odisha
Tender Value
23.98 Crore
Estimated cost
Bid Submission
03 Dec 2026
10 days left
EMD
23.98 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Fish Landing Center At Panidwara In Khordha District, Odisha
BOQ
| Sl. No. | Item Description |
| 1 | Quarring, Collecting, Conveying Moorum for spreading moorum and consolidation with HRR including hire charges, watering, cost, conveyance, royality and taxes of all labour, labour cess, T&P required for the work complete in all respect as per the direction of Engineer in charge. (measurement will be made on finished item only) Reclamation, Paved Area, Revetment & Surfacing |
| 2 | Sand Filling in Foundation & Plinth: Earthwork in filling foundation trenches and plinth with approved quality sand, including supplying, cost, conveyance, loading, unloading, royalties, statutory levies, labour cess, and all applicable taxes; spreading in layers not exceeding 150mm thick, watering, compacting, and ramming to achieve maximum density; including all tools, plant (T&P), equipment, and incidentals necessary for the complete execution of work in all respects, as per technical specifications and directions of the Engineer-in-Charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, Reclamation, Septic tank and Soak pit, ETP, Paved Area, Surface Drain |
| 3 | Earth work in excavation of foundation trenches in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and levelling the bed up to 1.50M depth and depositing the excavated materials away from the work site with all leads and lifts .Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in all respect as per the direction of Engineer in charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, Reclamation, Septic tank and Soak pit, ETP, Paved Area, Surface Drain, Revetment & Surfacing |
| 4 | Shifting & Setting Up Piling Rig per Location: Shifting, moving, positioning, leveling, and setting up the complete piling plant, rig, heavy equipment, tools, and accessories at each individual pile location within the site premises; including initial rigging, alignment, site preparation, path/ground stabilization for rig movement, supplying all necessary labor, tools and plant (T&P), and meeting the cost of conveyance, labour cess, statutory levies, and all applicable taxes required for the complete execution of work in all respects, as per technical specifications and directions of the Engineer-in-Charge.Approach Jetty |
| 5 | Providing, fabricating, rolling, circular welding, transporting, and delivering to site 6mm thick Mild Steel (MS) plate liners of 600mm nominal/outer diameter for bored cast-in-place concrete piles, conforming to IS: 2062 (Grade E250 / Fe 410 W). Rate shall be inclusive of the cost of raw MS steel plates, rolling to cylindrical casing shape, continuous shop/field full-penetration welding of longitudinal and circumferential butt joints, cleaning of welds; all raw material supply, conveyance, freight, loading, unloading, handling, storage, site delivery, all applicable statutory taxes, octroi, and duties; all labor, high-strength electrodes, tools, plants, machinery, cranes, cutting waste, scrap allowances, and all incidental operational and safety expenses complete in all respects, as per approved structural drawings, technical specifications, and to the complete satisfaction of the Engineer-in-Charge.Approach Jetty, Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 6 | Driving, sinking, and positioning of 600 mm nominal diameter Mild Steel (MS) liners/casings for bored cast-in-situ concrete piles to specified depths below working ground level, including precise positioning and pitching of liners using GPS / total station instrument, full-penetration field welding, jointing, extension of liners as per site requirements, and trimming/cutting down extra length of liner above the required cut-off level; utilizing specialized pile driving rigs, vibro-hammers, cranes, and other necessary mechanical equipment and machinery; including all cost of operations, conveyance, loading, unloading, handling, site shifts, electric welding consumables, all statutory taxes, labor cess; all labor, skilled operators, tools, tackles, plants (T&P), testing for alignment/plumbness, and removing/disposing of cut-off steel scrap complete in all respects, as per approved drawings, technical specifications, and to the complete satisfaction of the Engineer-in-ChargeApproach Jetty, Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 7 | Temporary Cofferdam Construction: Providing, constructing, maintaining, and removing temporary cofferdam using driven wooden Bullah piles (sal/hardwood of required diameter and length) driven deep into the bed, interconnected with waling pieces/runner braces, along with double-line or single-line sand bag protection stacked securely; including supply, filling, tying, and placing sound sand-filled gunny/HDPE bags to seal seepage; maintaining structural stability against water flow and wave action, continuous dewatering during Toe Wall construction, and final dismantling and site clearance after completion; including all costs, conveyance, labor, labor cess, tools & plant (T&P), statutory taxes, and incidentals complete in all respects as per technical specifications and directions of the Engineer-in-Charge. Diphragm Wall, Revetment & Surfacing |
| 8 | Constructing cast-in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting, ready mix reinforced cement concrete, tramie controlled, of M 30 grade using minimum 400 kg cement per cum of concrete including providing and mixing required admixtures in recommended proportions as per IS : 9103, as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for diaphragm wall having thickness as per approved structural design not exceeding 600 mm, in pannels of required depth and lengths as per approved drawing, including constructing necessary guide walls as required and as specified including boring in all kinds of soils and rocks, including working in or under water and / or liquid mud, in foul conditions and pumping or bailing out of water and removing slush, including disposal of earth/ rock / slush etc. for all leads and all lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and when required for all depths, including agitating bentonite slurry during trenching etc., providing and fixing stop ends or form tubes, upto the required depth of diaphragm wall including extracting the same after casting, including chipping off the bentonite adulterated concrete or unsound concrete up to the cut off level for obtaining the sound concrete, dressing undulations on the exposed face of diaphragm wall after excavation by chipping / chiseling etc. including filling the depression/ cavities with sound concrete etc. complete and as directed by the Engineer-in- charge, but excluding the cost of reinforcement and inserts. (rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position the reinforcement cage in the trench, including the additional cost of welding the reinforcement bars etc. involved in the work and all other incidental expenditure for completing the work as directed by the Engineer-in-charge),Including cost, conveyance, and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Diaphragm Wall |
| 9 | Boring through all type of soil strate including silty clay or silty sand and compact fine to medium sand (Rate include removal of excavated materials clearing base, taking all necessary measures to retain sides and prevent recking of pile) from cut off level to (-) 10 m level. Including cost, conveyance and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Approach Jetty |
| 10 | Providing and placing insitu design mix reinforcement cement concrete of M35 design mix using 20mm ISS HBG metal with minimum cement concrete of 320 Kg/M3 (Three hundred and Twenty kilogram) with maximum water cement ratio of 0.4 and slump 150-200 mm by tremie concrete but the rate excluding cost of steel reinforcement and including the cost of form work, labour charges for mixing, transporting laying curing, cofferdams, shoring, strutting etc. complete complying with standard specification. The rate is inclusive of cost and conveyance of all ingradient materials labour charges for weighing batching mixing laying tamping, vibrating finishing, curing and conducting sample standard cube test to ascertain compressive strength of concrete and including hire charges for cast in pilesDiaphragm Wall |
| 11 | Supplying, fabricating and placing in Position HYSD steel for R.C.C. works for R.C.C. works in diaphragm wall for plain / R.T.S HYSD rods. The rate is inclusive of current consumption charges ,labour charges for welding, placing lowering the mesh of steel rod by means of cranes in the bore, hire charges for crane and conveyance charge from the point of purchase to the epoxy coating plant of Reputed companies and bringing from there to the site of work as directed by the Engineer.Diaphragm Wall |
| 12 | R.C.C. work M-30 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying.Ground Floor Approach Jetty, Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, Septic tank and Soak pit, ETP, Paved Area, Surface Drain |
| 13 | First Floor 20000 Ltr O.H. Tank and U.G. Sump |
| 14 | Second Floor 20000 Ltr O.H. Tank and U.G. Sump |
| 15 | Providing, erecting, propping, staging, bracing, locking, and maintaining rigid, smooth, water-tight centering and shuttering for all reinforced cement concrete (R.C.C.) structural elements using approved steel plates, ply formwork (marine/film-faced plywood), or engineered shuttering systems, including all necessary falsework, staging, scaffolding, runner beams, props, turnbuckles, tie-rods, sleeves, wall ties, and shuttering oil/release agent application; and dismantling, striking, removing, cleaning, and stacking the formwork after specified curing/casting period across all floors, basements, and all heights/elevations; including the cost of all materials, conveyance, freight, loading, unloading, handling, storage, statutory taxes, labor cess, and duties; all labor, skilled shuttering carpenters, tools, tackles, plants, machinery, and equipment (T&P) complete in all respects, as per approved structural drawings, technical specifications, and to the complete satisfaction of the Engineer-in-Charge.Ground floor RCC foundation, plinth, Beam and footing base of column. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, ETP, Paved Area |
| 16 | R.C.C. Beams, columns, grider and bressmer etc. Ground FloorAuction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, ETP, Paved Area |
| 17 | R.C.C. Beams, columns, grider and bressmer etc. First Floor20000 Ltr O.H. Tank and U.G. Sump |
| 18 | Roof slab, landing, balconies, projecting up to 4.3Mtr. Height. Ground FloorAuction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, Septic tank and Soak pit. ETP |
| 19 | First Floor20000 Ltr O.H. Tank and U.G. Sump |
| 20 | Second Floor20000 Ltr O.H. Tank and U.G. Sump |
| 21 | LintelAuction Hall, Net Mending Shed, Gear Shed, Community Toilet, Compound wall and Main gate |
| 22 | R.C.C. Walls & Fins including attached pillastersGround Floor20000 Ltr O.H. Tank and U.G. Sump, ETP, Surface Drain |
| 23 | First Floor20000 Ltr O.H. Tank and U.G. Sump |
| 24 | RCC Staircase - Ground Floor20000 Ltr O.H. Tank and U.G. Sump |
| 25 | RCC Staircase - First Floor20000 Ltr O.H. Tank and U.G. Sump |
| 26 | High Yield Strength Deformed (HYSD) Steel Reinforcement (Fe-500): Supplying, procuring, cutting, straightening (coiled or bent-up bars), bending, cranking, hooking, welding, or lap-jointing (where permitted/required); binding and tying with 18 to 20 gauge GI binding wire, placing and laying in exact position with proper concrete spacer blocks, chairs, and lap splices as per approved structural drawings and bar bending schedules for all RCC works; including hoisting, lowering, and placing in position across all floors and elevations; including full cost of steel procured strictly from primary producers (SAIL / RINL / TATA / JINDAL Panther / SHYAM STEEL), GI binding wire, conveyance, handling, loading, unloading, storage, wastage, labor, tools & plant (T&P), statutory taxes, labor cess, and all incidental expenses complete in all respects as per technical specifications and directions of the Engineer-in-Charge.Ground FloorApproch Jetty, Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, Septic tank and Soak pit. ETP, Paved Area, Surface Drain |
| 27 | First Floor20000 Ltr O.H. Tank and U.G. Sump |
| 28 | Second Floor20000 Ltr O.H. Tank and U.G. Sump |
| 29 | Providing fitting fixing of M.S. Bollard of 750mm long 500mm dia with 6mm thick M.S. liner and 40mm dia G.I. pipe including grouting with R.C.C. M-30 over the basement including cost, conveyance and taxes of all materials complete as per specification & specified drawing and direction of Engineer-in-charge. Diaphragm Wall, Approach Jetty |
| 30 | Supplying, fabricating, hot-dip galvanizing or applying anti-corrosive protective coating, transporting, delivering to site, placing, aligning, and embedding in position MS Mooring Rings of 20mm bar diameter × 200mm internal diameter, welded to a 6mm thick MS base plate reinforced with 10mm thick MS gusset plates, embedded inside RCC beams, columns, wharves, jetties, or retaining structures as per approved structural drawings. Work shall include continuous full-penetration structural arc welding (conforming to IS: 816 / IS: 9595), surface preparation (sand/shot blasting), anchoring/embedding into formwork prior to concreting, leveling, securing to reinforcement cage, and post-concreting cleaning; cost of all raw MS structural steel plates and bars (conforming to IS: 2062 Grade E250 / Fe 410 W), welding consumables, conveyance, freight, loading, unloading, transit insurance, site storage, and handling; all statutory taxes, duties, and labor cess; all skilled labor, certified welders, equipment, safety staging, tools and plants (T&P), and all operational/incidental charges complete in all respects, as per technical specifications, drawings, and to the complete satisfaction of the Engineer-in-ChargeDiaphragm Wall, Approach Jetty |
| 31 | Providing fitting fixing of EPDM wing shape rubber fender having 1000mm x 250mm x 150mm hollow and 50m thick fixing on the water front surface of the berth with anchor bolt (8\\"stainless steelof 304 grade- 6 peace) in each mtr for 2 mtr of vertical length. Fixing @2mtr c/c along the berth including cost conveyance labour taxes of all material complete as per specification and direction of enginer in charge. Diaphragm Wall, Approach Jetty |
| 32 | Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/return wall with 100mm dia PVC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing foce. including cost conveyance labour taxes of all material complete as per specification and direction of enginer in charge. Diaphragm Wall |
| 33 | Providing and laying of Filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2500.4.2.2 of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification including cost, conveyance, labour, taxes of all material complete as per specification and direction of enginer in charge. .MORTH specification No. 710.1.4 of IRC: 78 & 2200.ETP |
| 34 | Plain Cement Concrete (PCC 1:3:6): Providing, mixing, batching, laying, and compacting Plain Cement Concrete of nominal mix 1:3:6 (1 part cement : 3 parts fine aggregate : 6 parts coarse aggregate) in foundation, under floors, and plinth, using 40mm (4cm) size hard granite coarse aggregate/metal and approved fine aggregate; machine-mixed or hand-mixed (where approved), laid in uniform layers, thoroughly compacted using rammers/vibrators, and properly cured for the specified period; including full cost, procurement, conveyance, loading, unloading, and storage of all materials (cement, aggregates, water), skilled/unskilled labor, equipment, tools & plant (T&P), lead, lift, statutory taxes, royalties, labor cess, and all incidental expenses necessary to complete the work in all respects, as per technical specifications and directions of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate, Septic tank and Soak pit. ETP, Paved Area, Surface Drain |
| 35 | Providing and laying Non-Woven Geotextile filter cloth of mass 450 GSM (Grams per Square Metre), manufactured from high-tenacity polypropylene/polyester fibers, conforming to relevant IS/MoRTH specifications of approved make and quality. The rate shall be inclusive of all materials, supply, cost of geotextile fabric, conveyance, freight, loading, unloading, storage, handling, site delivery, all applicable royalties, statutory taxes, octroi, and duties; all labor, tools, plants, equipment, cut-outs, waste/overlap allowances (overlaps not to be measured extra), sewing/stitching, placing, positioning, pinning, and anchoring as per site requirement; including all incidental operational charges complete in all respects as per technical specifications, drawings, and to the complete satisfaction of the Engineer-in-Charge.Revetment & Surfacing |
| 36 | Brick masonry work with Fly Ash Bricks of size 25cm × 12cm × 8cm (250mm × 120mm × 80mm), having a minimum compressive strength of not less than 75 kg/cm² (Class 7.5) with dimensional tolerances within ±8 percent, laid in cement mortar 1:4 (1 part cement : 4 parts coarse sand) in Foundation and Plinth, including breaking of bricks to required shapes and sizes, raking out joints, embedding wall ties or reinforcement wherever required; including the cost of all materials, cement, sand, fly ash bricks, water, conveyance, freight, loading, unloading, storage, handling, site delivery, all applicable royalties, statutory taxes, octroi, and duties; along with all labor, tools, equipment, plants (T&P), scaffolding, staging, curing for specified duration, clearing of debris, and all incidental operational charges complete in all respects as per technical specifications, drawings, and to the complete satisfaction of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, Compound wall and Main gate, Septic tank and Soak pit |
| 37 | Brick work with Fly Ash.Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:4) in superstructure including cost, conveyance, royalties, taxes of all materials etc. required for the work complete in all respect as directed by the Engineer –in-charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump. Compound wall and Main gate, Septic tank and Soak pit |
| 38 | Cut & dress each pile head to attain the Sound concrete upto required lines & levels etc. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Approach Jetty, Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 39 | Cut & dress D-wall head to required lines & levels etc. complet. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Diaphragm Wall |
| 40 | Factory-Made Single Extruded WPC Frames / Chowkhats (125 x 62 mm): Supplying and fixing factory-made single extruded Wood Polymer Composite (WPC) solid frames / chowkhats of cross-sectional size 125 x 62 mm for doors, windows, clerestory (clearstory) windows, and other openings; including high-density termite-proof, waterproof, fire-retardant, and UV-stabilized virgin WPC material; cutting, mitering, jointing, fixing in true plumb and alignment using MS/SS holdfasts embedded in PCC block masonry or stainless steel dash fasteners/expansion anchor bolts with plastic caps, sealing periphery joints with approved silicon sealant/PU foam, and finishing neatly; including full cost, conveyance, loading, unloading, storage, wastage, labor, tools & plant (T&P), lead, lift, statutory taxes, labor cess, and all incidental expenses complete in all respects, as per manufacturer specifications, approved designs/drawings, and directions of the Engineer-in-Charge.Community Toilet |
| 41 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. Including cost, conveyance and taxes of allmaterials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 42 | Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Community Toilet |
| 43 | Supplying, fitting, fixing of factory made single leaf rigid F.R.P composite door shutter of 32mm thick, laminated with to G.R.P skins with wood grain finished, fabricated using UV stabilized Isopthalic gal coat and one layer of 450 gsm E-glass chopped strand Mat (CSM) impregnated with orthopathalic, polyster resin including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. with cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Community Toilet |
| 44 | Poly Vinyl Chloride (UPVC) (FENESTA / NOL VEKA LTD) Casement Window with top fixed-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55mmx2.5 mm for outer frames. 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 4 mm thick hexagonal aluminium jali/ 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 45 | Plain Cement Concrete (PCC M20 Grade): Providing, batching, mixing, laying, compacting, and finishing Plain Cement Concrete of M20 grade (Design Mix or Standard Nominal Mix as specified) using 20mm and down grade black hard granite crusher-broken stone chips as coarse aggregate and approved fine aggregate; machine-mixed using a mechanical concrete mixer, hoisting/lowering to required levels, placing in position, thoroughly compacting with mechanical vibrators, and curing for the specified period; including full cost, procurement, conveyance, loading, unloading, and storage of all materials (cement, aggregates, water), staging, scaffolding, skilled/unskilled labor, equipment, machine operation, tools & plant (T&P), lead, lift, statutory taxes, royalties, labor cess, and all incidental expenses complete in all respects, as per technical specifications and directions of the Engineer-in-Charge.Revetment & Surfacing |
| 46 | Enamel Painting on Wood and Iron Work (2 Coats over Primer): Painting 2 coats with approved premium synthetic enamel paint of approved brand, shade, and manufacture over 1 primary coat of approved primer (red oxide/zinc chromate primer for iron/steel surfaces and wood primer for timber surfaces) on new or old woodwork, steel/iron work, doors, windows, structural steel, or metal fabrications; including preliminary surface preparation such as scraping, de-rusting, sand-papering, cleaning oil, grease, dirt, and loose scale, applying approved putty/filler to fill cracks, joints, or unevenness, sand-papering smooth before painting, and applying paints evenly with approved brushes/spray equipment; including full cost, procurement, conveyance, and storage of enamel paint, primer, putty, and solvents, staging, scaffolding, laddering, safety gear, skilled painters, labor, tools & plant (T&P), lead, lift, statutory taxes, labor cess, and all incidental expenses complete in all respects, as per technical specifications and directions of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 47 | 12mm Cement Plaster (1:4 Mix) with Smooth Finish: Providing and applying 12mm thick cement plaster in cement mortar 1:4 (1 part cement : 4 parts approved screened and washed sharp sand) on brick, stone, or concrete wall surfaces, columns, and soffits; including thorough preparation of background surfaces such as raking out mortar joints, cleaning, wire-brushing, washing, and wetting the substrate; mixing mortar, applying plaster coat evenly to true line, plumb, and level, and finishing to a smooth, uniform surface; including complete curing of the plaster for the required period, providing double scaffolding, staging, ladders, safety gear, full cost, conveyance,royalities, loading, unloading, storage, statutory taxes, labor cess, labor, tools and plant (T&P), and all incidental expenses necessary to complete the work in all respects, as per technical specifications and directions of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 48 | 2.5cm Thick Grading Concrete (1:2:2 Mix): Providing, mixing, hoisting, lowering, laying, and compacting 2.5cm (25mm) thick grading concrete of nominal mix 1:2:2 (1 part cement : 2 parts fine aggregate : 2 parts coarse aggregate) over roof slabs, terracing, or floor bases to required slopes and gradients, using 6mm size hard black granite crusher-broken chips as coarse aggregate and approved fine aggregate; machine-mixed or thoroughly hand-mixed, laid evenly to true levels, slopes, and alignment, finished smooth/troweled as required, and properly water-cured for the specified period; including full cost, procurement, conveyance, loading, unloading, and storage of all materials (cement, aggregates, water), staging, scaffolding, labor, tools & plant (T&P), lead, lift, statutory taxes, royalties, labor cess, and all incidental expenses complete in all respects, as per technical specifications and directions of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 49 | Supplying and Fixing Granite Tile Flooring over 25mm Bed (1:1): Supplying, fitting, and fixing approved premium-quality vitrified floor tiles of size not less than 0.10 sqm or equivalent/larger) of approved shade, pattern, and make; laid over a 25mm thick bed of cement mortar 1:1 (1 part cement : 1 part fine aggregate/sand) and bedded/jointed with neat cement slurry slurry/adhesive; including surface preparation, laying in true line, level, and plumb, tight-jointing with matching white/pigmented cement grout or tile epoxy grout, cleaning tiles post-installation, curing, cutting tiles neatly at edges, corners, and junctions using tile cutters, waste management, full cost, conveyance, loading, unloading, storage, skilled labor, tools & plant (T&P), lead, lift, statutory taxes, royalties, labor cess, and all incidental expenses complete in all respects, as per technical specifications and directions of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 50 | Providing and applying one coat of water-thinnable/alkali-resistant primer of approved brand, make, and manufacture (having low VOC content less than 50 g/L) over new/old plastered masonry, concrete, or asbestos wall surfaces at all heights, levels, and floors. The surface preparation shall include thorough cleaning, brushing, scraping of all dirt, loose mortar drops, efflorescence, grease, dust, and foreign matter, filling fine hairline cracks with approved putty/fillers, rubbing smooth with sandpaper, and washing/drying as required before application. Rate shall be inclusive of cost of primer material, thinning liquid/water, conveyance, freight, loading, unloading, transit insurance, site storage, and handling; all statutory taxes, and duties; all skilled/unskilled labor, painter equipment, safety harness, scaffolding, staging, ladders, brushes, rollers, tools and plants (T&P), cleaning up of drips and splashes, and all operational/incidental charges complete in all respects, as per technical specifications, drawings, and to the complete satisfaction of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 51 | Providing and applying two or more coats of oil-bound washable distemper of approved brand, shade, and manufacture over new wall surfaces (under coat/primed coat to be paid separately or integrated) at all heights, levels, and floors to achieve an even, uniform, smooth finish. The scope includes cleaning and preparing the wall surface by removing loose particles, dust, and efflorescence, rubbing down smooth with sandpaper, wiping clean; supply of distemper, mixing with specified quantity of water/thinners; cost of all materials, conveyance, freight, loading, unloading, transit insurance, site storage, and handling; all statutory taxes, and duties; all labor, skilled painters, scaffolding, staging, ladders, brushes, rollers, protective masking, cleaning of paint drips/splashes from glass, floors, and fittings, along with all tools, equipment, and plants (T&P) complete in all respects, as per technical specifications and to the complete satisfaction of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, ETP |
| 52 | Wall painting 2 coats with weather coat of approved shade on new work over a coat of to give an even shade including cost of paint, and labor cess; all skilled/unskilled labor, painter equipment, safety harness, scaffolding, double staging, ladders, brushes, spray equipment, tools and plants (T&P), protective masking, cleaning of paint spatters from window frames/glass/floors, along with all operational and incidental charges complete in all respects, as per technical specifications, drawings, and to the complete satisfaction of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 53 | Providing and laying Rough Stone Dry Packing (Pitching) in aprons, slopes, and revetments to specified thickness, profiles, lines, and gradients using approved quality sound, tough, durable, un-weathered hard granite stones/boulders of size ranging from 15 cm to 30 cm. Work includes trimming, dressing, and preparing the underlying earthen bed or geotextile/gravel filter surface; hand-packing stones tightly with their broadest face downwards and largest stones at the toe; filling all interspaces and voids tightly with small stone chips, spalls, and pin-stones followed by thorough hammer wedging to ensure a rigid interlocking mass; including the cost of all granite stones, quarrying, conveyance, freight, transit insurance, loading, unloading, handling, site storage, and delivery; all statutory taxes, duties, and labor cess; all labor, skilled stone masons, tools and plants (T&P), staging, dewatering if required, and all operational/incidental charges complete in all respects, as per technical specifications, drawings, and to the complete satisfaction of the Engineer-in-ChargeRevetment & Surfacing |
| 54 | Cement Concrete (1:2:4) using 12mm size hrad broken granite chips including hoisting and laying. Including cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Net Mending Shed |
| 55 | Fixing Glazed Tiles in Dados Skirting &Risers of Steps of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles. Including cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Community Toilet |
| 56 | Providing Fitting fixing of 50mm thick R.C.C. Jally as per approved design in cement mortar in position after cutting the groove etc. Including cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Gear Shed, 20000 Ltr O.H. Tank and U.G. Sump. |
| 57 | Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Paved Area |
| 58 | Providing fabricating fitting fixing at site stainless steel gate of approved size and specification made out of 304 grade of steel using 50 x 50mm size square hollow bar frame with horizontal and vertical balustrade of (50 x 25) mm square bar @ 150 mm c/c in 6 rows for fixing of main gate as per approved drawing design and specification buffing polishing etc. Including cost, conveyance and taxes of materials, all labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Compound wall and Main gate |
| 59 | Providing, fabricating and erecting at site a Cow Catcher for restricting the entry of cattle into the Fish Landing Premises, comprising 80 mm dia. G.I. pipes supported on ISMB 150 mm joists and securely tied/fixed with 50 × 6 mm flats, including all necessary accessories, fittings, fasteners and connections required for complete fabrication and installation. The item shall include the cost of all materials, conveyance, loading/unloading, taxes, labour, tools and plants (T&P), and all other incidental charges necessary to complete the work in all respects as per the design, specifications and directions of the Engineer-in-Charge.Compound wall and Main gate |
| 60 | Boring Single pile foundation with RCC M30 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S/T or steel and labour charges for cutting, bending and binding of steel. (375 mm dia Pile upto 14Mtr depth) Including cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 61 | For each additional depth of 0.5m beyond initial depth of 6.0m add extra to the rate. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 62 | R.C.C. work M-20 grade having minimum compressive strength in work test of 300 Kg / Cm2 in 15 cm. cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 12 to 20 mm size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, laying concrete and compacting by using vibrators watering and curing for 4 weeks and finishing the exposed surface smooth providing grooves or beads where ever necessary in all floors including cost, conveyance, royalties and taxes of all materials, cost of all labour, labour cess, T&P required for the work etc. complete in all respect as directed by the Engineer in-charge.Auction Hall, Septic tank and Soak pit |
| 63 | Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Auction Hall, Net Mending Shed, Gear Shed, Community Toilet, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate. |
| 64 | Providing fitting & fixing of UPVC Louvered ventilator of reputed Brand with fitting and fixing including cost, conveyance of all material, Carriage & labour, T & P, taxes complete as per direction of Engineer in charge.Community Toilet |
| 65 | Labour for admixing sand and moorum etc. complete including cost of all labours and hire charges of T & P materials required for work as per specification and direction of Engineer-in- Charge Reclamation |
| 66 | 12mm Thick Cement Plaster(1:4)over Brick Work With Cement Punning for Skirting. Including cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Septic tank and Soak pit, Surface Drain |
| 67 | 16mm Thick Cement Plaster (1:6) over Brick Work. Including cost, conveyance, royalities and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. ETP |
| 68 | Fixing tiles in Granite dados skirting and risers of step on 12mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance, loading, unloading, storage, skilled labor, tools & plant (T&P), lead, lift, statutory taxes, royalties, labor cess, and all incidental expenses complete in all respects, as per technical specifications and directions of the Engineer-in-Charge.Auction Hall, Net Mending Shed, Gear Shed, 20000 Ltr O.H. Tank and U.G. Sump, Compound wall and Main gate |
| 69 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x2.55mtr. Deep soak-way pit with dry brick walling up to 2.10mtr. height and bbrick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. Including cost, conveyance, and taxes of all labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. . (per each )Septic tank and Soak pit. |
| 70 | Provision for PVC coated Ring Ladder inside the sseptic tank. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Septic tank and Soak pit. |
| 71 | Desiltation by removing overburden from the harbour basin of F.L.C. as directed by the Engineer in charge using suitable type of dredgers including laying of Shore pipe lines as well as floting arrangements for disposing Overburden slurry consisting other bad materials present in the harbour basin, silt and sand upto 1500mtr. the rate shall include the cost of labour, materials, consumable, P.O.L. other accessories required for running the dedger, tools and plants etc. includign bundign in the island if required by providing coffer dam fir retention of dredged solid materials. the job includes all pre and post survey for payment purpose.D. Wall, Removal of Overburden in Basin Area |
| 72 | Supplying, fitting, fixing Alluminium Grating in aluminum framed open able windows using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tappered clip of section 4125, aluminum angle, rubber beading, friction stay and handle etc. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Auction Hall |
| 73 | Providing & making Gabion (1x1x1.=1.0cum) structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes(10% aluminium & 90% Zinc coated) of required size, Mesh Type (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 4.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Revetment & Surfacing |
| 74 | Providing & fixing 25mm thick Bitumenous expansion joint board (I.S.I) in expansion joint complete as per drawaing & Technical Specification. Including cost, conveyance and taxes of all materials, labour, labour cess, T&P required for the work complete in respect as per the specification & direction of Engineer in charge. Paved Area |
| 75 | Environment Protection Measure and ArboricultureProviding and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions and Circular Cement Concrete pots of specified size,Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4mm complete in all respects as directed by the Engineer-in-Charge. |
| 76 | CONSTRUCTION OF 200MM X 150MM DIA PRODUCTION WELL (FOR 2 NOS.)Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories, T & P and consumables etc. for lowering of 200mm/150mm dia GI/PVC/MS pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard & boulder formation (GI/PVC/MS) Casting pipes it required to prevent collapse of over burden is to be provided by contractor including lowering and withdrawing after completion of the tubewell. 0 Mtr to 100 Mtr |
| 77 | 101 to 200 Mtr |
| 78 | 201 to 315 Mtr |
| 79 | Lowering the following sizes of GI/PVC/MS casing pipe with or without slotted pipes as per the necessecity from ground level upto 45.00 mtrs depth and fitted & fixed of in perfectly vertical position including cutting & threading of pipes & slotted pipes & supplying & fixing all jointing materials T&P etc. all complete and keeping the top of casing pipe threaded including plugging tubewells to prevent entry of foreign materials. |
| 80 | Cleaning & Developing the tubewell with their own compressors continiously worked all clear and adequate discharge is obtained from the tubewell including supply & use of all necessery equipments and labour as per Direction of Engineer-in-charge. |
| 81 | Supplying all materials & labour T&P and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 Mtr below ground level as per drawing to plug the bore hole excluding cost cement all complete as per the direction of Engineer-in-charge. Minimum one Mtr of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing ,(Excluding cost of cement which will be supplied directly by the department). |
| 82 | Supplying all materials, labour, T&P and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental R.W.S & S store in good condition |
| 83 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 84 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 85 | Supplying all labour, T&P and materials for Packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel etc. complete as per the direction of the Engineer-in-charge. |
| 86 | MECHANICAL WORKS FOR ETPSupply, installation, testing & commissioning of Stainless Steel Perforated, 6mm perforated Bar Screen with suitable lifting arrangement with brackets in the sreen sump of (size 600 mm x 1000mm depth approx), SS-304 |
| 87 | Supply, installation, testing & commissioning of electronic type level indicator, instrumation and controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts. Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned component and additional component if so required for the complete working of the ETP. |
| 88 | Supply, installation, testing & commissioning of non clogging type Mono block centrifugal Effluent transfer pumps capable of handling solids upto 32 mm having C.I casing & Bronze impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically Capacity 3.0 M3/hr each , 1 set = 2 Nos.(1 working + 1 standby) |
| 89 | Supply, installation, testing & commissioning of non clogging type Mono-block centrifugal sludge transfer pumps capable of handling solids upto 25 mm having C.I casing & Bronze impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically Capacity 1.0 M3/hr each , |
| 90 | Twin lobe type rotary air blowers with 1450 rpm suitable motor (1W + 1Sb) capable of delivering 15 cum/hr ( 2 nos. ) of free air at 0.4 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable 1 HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. complete with silensors,filters ,NRV,SV and divert valaves,Vibration pads etc complete with all acessories 1set=2 Nos (1 working + 1 standby), |
| 91 | Piping (heavy class) in MS/GI/SS/UPVC/HDPE as per the approval of the consultants, to be designed for suitable and corrosion resistance complete or as directed by engineer in charge at site |
| 92 | TERTIARY TREATMENT PLANTSupplying, installing, testing and commissioning of horizontal single/multistage centrifugal filter feed pump complete ,impeller CI casing . Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. of capacity 5.0 M3/hr @ 35 MWC.(1 W + 1 St by ) MONO-BLOCK PUMP,1 set = 2 Nos.(1 working + 1 standby) |
| 93 | Providing, fixing, testing & commissioning of FRP Tertiary filtration plant MULTI GRADE FILTER (suitable for 3.5 Kg/Sqcm working pressure) complete with initial charge with Gravels/pebbles/sand /silex media , Multiport valves with built in frontal pipe work with back wash system, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings associated works. |
| 94 | Providing, fixing, testing & commissioning of FRP water filtration plant ACTIVATED CARBON FILTER (suitable for 3.5 Kg/Sqcm working pressure) complete with initial charge with Gravels/pebbles/Activated Carbon , Multiport valves with built in frontal pipe work with back wash system, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings associated works. |
| 95 | Supply, installation, testing & commissioning of Hypochloride dosing system for tertiary water treatment with 50 L . HDPE/PVC tank with lid etc Please Enable Macros to View BoQ information |
| 96 | Supply, installation, testing & commissioning of Hypochloride dosing system for tertiary water treatment with 50 L . HDPE/PVC tank with lid etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender