Public Administrative Department Local Bodies Closing in 8 days TDR #58507151

Tender For Development Of Street Food Hubs Proposal

Issued by Local Bodies · Ganjam, Odisha
Tender Value
2.41 Crore
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
2.41 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Development Of Street Food Hubs Proposal

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 Technical Corrigendum Technical Bid 30-Nov-2026

BOQ

Name of Work:- Development of Street food Hubs Proposal
Sl. No. Item Description
1(Drain)Earth work in hard soil or gravelly soil with in 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
2Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
3P.C.C (1:4:8) with 40 mm size Crosser broken hard granite metal with cost of all labour & materials.
4Reinforced cement concrete of M-20
5Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-In-Charge.
6Dismantling and removing 2.5 cm. thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead
7(Paly Equioment )Supplying and installationThree-Seater Designer Bench Providing and fixing in position 3 seaters Designer Bench of approved design and make of minimum area 1.5 meter x O.60meter. Overall all minimum height 0.80 m consisting of 1. FRP Channel Strip-seat & back with end cap- (C- Section of thickness upto 5mm 1200mm long with wooden finish bolted to side frames.) 2. BENCH FRAME (cast iron designer frame conforming to 1S 1730 made from sand casting method).( SITTING BENCHES)
8Supplying and installation of dustbins are made of FRP in different cartoon shapes and painted with attractive colors. The dust bins are of height 4' and having facility to drop waste from front and remove them from( DUSTBIN)
9Supply and installation of floor standing RO & UV Purifier water cooler having purification capacity upto 50L/hr , inlet storage capacity of 50ltr .Automation Grade Automatic Plant Area 461 X 582 X 1441 mm Number of Membranes in RO 3 230 V Max Water Recovery Rate 50-55 % Number of Filtration Passes 5 Purification Type.RO Water purifier and water cooler.RO Capacity (LPH) 50 LPH RO+UV+Sediment+carbon.Material of construction -outer pannel stainless steel AUS J1 grade .2nosof cold water compressor ,Hermitically sealer ,reciporting compressor ,condensor propeller fan refrigerant used R-134A .Temprature range 10-25 deg C,RO brand-Usha Cooler SS4080 and Lexpure 50LPH,KENT,Eureka Forbes Aquaguard Reviva ETC BRAND and including cost conveyance,taxes etc complete as per manufacturer's specification or complete as per the direction of Engineer .( Water Purifier)
10Providing and fixing In position FRP Merry Go Round (MGR) of approved design and make of minimum area 1.8meter dia,(Safe Play area minimum 3.0m dia),over all minimum 900 mmheight from ground consisting of1. FRP PLATFORM (Minimum 5MM Thick, 1800 mm dia withcheckered texture) 2. PLATFORM SUPPORTING (structured frame of IAS- 40x40x5 & 25x25x5,ISF-130x50x10 & 65x50x5 welded together, Triangular frame. OF 75x40x5 C channel),3. CENTER SUPPORT (80NB 500 mm long GI pipe with150x150mm base plate ,with Ball Bearing no. 62092 and Taper Roller Bearing no. 30209)4. RAILING OVER PLATFORM (3 nos 20NB G.I Pipe with GIRailing frame conforming to EN 1176-1:1998lndudlng fixing each supporting leg/ anchoring arm of playing instrument with foundation angle/base angle/ base plate/tor rod etc. In 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size excavation for concrete block pit, curing etc. all complete( Merry Go Round (MGR))
11Providing and fixing in position Double Arch swing of approved design and make of minimum 3.0m X 1.0m size ( Safe Play area minimum.4.0m X 7.0m)with minimum over all height 2400 mm from ground consisting of:1. TOP PIPE:(50 NB hot dip GI Pipe of minimum length of 2800 mm with two arch swing flanges welded at both the end) 2. MAIN FRAME: ( Pair of 80 NB hot dip GI Pipe of minimum height 2800 mm welded together with flange with 25 NB hot dip GI Pipe spacer)3. CHAIN (Rubber dip molded swing chain of dia.6mm &1450mm Long), 4. S-HOOK(dia 8mm & 145x130 Triangular hook of SS 304 Grade), 5. RUBBER SEAT (Molded anti-skid Rubber Seat tested for rubber hardness as per Shore Durometer Type A scale conforming ASTM D2240 having value of approx.5O), 6. Swing clamp: (molded nylon -6 plastic) Including fixing each supporting leg/ anchoring arm of playing Instrument with foundation angle/base angle/ base plate/tor rod etc. In 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size excavation for concrete block pit, curing etc.all complete ( Two Seated Arched Swing)
12Seesaw (Double Seater) - Supplying and installing seesaw made from MS tubular frame with central pivot support, anti-skid FRP seats, ergonomic back handles, and rubber bump stoppers at bottom. Weather-proof powder-coated finishing. ( Seesaw (Double Seater)
13FRP Wave Slide (Single) - Providing and installing FRP Wave Slide made of 3–4 mm thick FRP sheet, UV-stabilized, fitted on a heavy-duty MS ladder frame. The slide length shall be approx. 8–10 ft. Steps fitted with anti-skid rubber pads. Finished with weatherproof paint ( Spiral Slide )
14Double Air Walker Providing, supplying, and fixing of Double Air Walker made of heavy-duty MS tubular section (10–12 gauge) with anti-corrosive primer and 80–100 micron outdoor powder coating. Equipment includes two sets of foot pedals, hand bars, and sealed maintenance-free bearings ensuring smooth movement. Designed for full-body aerobic exercise and suitable for continuous outdoor use. The unit shall be firmly anchored on an RCC foundation with GI anchor bolts. ( Double Air Walker)
15Triple Twister equipment with three rotating platforms, central MS post, anti-skid rubber footplates, and sealed pivot bearings. Powder-coated frame suitable for long-term use ( Twister)
16Leg Press Machine - Providing heavy-duty outdoor Leg Press Machine manufactured from MS pipes with welded frame, textured footplate, curved hand supports, and bearing-based movement mechanism. Finished with durable powder coating suitable for outdoor weather conditions.( Glider/Set back/Leg Press Machine )
17Supply and installation of Abs Crunch / Sit-Up Bench made of heavy duty MS steel frame with powder coated finish, cushioned high-density foam seat and backrest covered with synthetic leather, adjustable leg support with foam rollers, anti-skid rubber pads, suitable for abdominal exercise in gym/fitness area, complete in all respect including fixing and placing at site as directed by the Engineer-in-charge. ( Abs Crunch or sit up Bench)
18Supply and installation of Knee/Hip Raise on Parallel Bars made of heavy duty MS steel frame with powder coated finish, having parallel support bars with cushioned elbow pads and back support, anti-skid rubber grips and base pads, suitable for abdominal, knee raise and hip raise exercises in gym/fitness area, complete in all respects including fixing and placing at site as directed by the Engineer-in-Charge.( Knee/Hip Raise on Parallel Bars)
19Installation & Fixing Charges - Cost of labour for assembling, tightening, bolting, alignment, testing, and fixing all open gym equipment as per manufacturer specifications.( LS)
20Supply, installation, testing, and commissioning of portable fire extinguishers of approved make conforming to relevant IS standards (such as IS:15683 / IS:2878), complete with all accessories, mounting arrangements, and initial filling, as required include all materials, labour, transportation, taxes, and incidental charges required for proper installation and commissioning.
21(Food Kiosk)Fixed Stainless Steel Food KioskSize: 4050mm × 2200mm footprint (approx 96 sqft area) Height: 3100 mmMaterials: SS frame + ACP wood finish cladding + Polycarbonate roofing
22( Landscaping)Supply of good quality garden soil preferably red alluvial/sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete. Lifting & Spreading of soil uniformly over the surface area as per landscape design/advice of the site in charge including cost of labour, T&P, all taxes and royalies etc.complete as directed by engineer-in-charge.( Landscaping area)
23Supplying of approved good quality cow dung/ goat dung manure well decomposed garbage-free including loading, unloading and delivery at site with all leads and lifts including cost of all labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge
24Lifting & Spreading of manure uniformly including cost of labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge. Hoeing of soil & manure spreaded for smooth mixing in the upper surface & leveling dressing for grassing the area including cost of labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge.
25Developement of Lawn including cleaning area of weeds, debris, etc. watering profusely for weed growth and removing the same, excavation with hand operated tools to depth of 450 mm, grading as specified in drawing, continuous weeding, spreading good quality soil and mix FYM mix up to 500mm depth in layers of 50mm and watering for compaction, rolling with hand roller, planting of lawn, watering regularly including supply of necessary labour and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including cost of supplying lawn of specified type Cynadon dactylon, Stenetophrum, Paspalum, etc. including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete
26LAND SCAPING AND HORTICULTURE: Trenching in ordinary soil up to a depth of 20 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and mañure before and after flooding trench with water (excluding cost of imported earth, sludges or manure)
27Supply & Planting of Shrubs - saplings, well developed, min. 0.6m high, well branched, preferably in bloom, in polybag of 30x20cm slze, disease free and development Including lexcavation up to 450mm deep, spreading good quality soil and FYM mix, continuous weeding operations, pre-treating area with anti-termite insecticide, planting of plants as specified in drawings including supply of necessary labor and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatmernt chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant, including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete.
28Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.
29( Protection Grill)Earth work in excavation of foundation in all kinds of soil within initial lead & 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth.
30Filling in foundation and plinth with filling sand, watered and rammed including cost of material, labour, royality and transportation etc. complete as per specifications and as directed by Engineer-in-charge.
31Cement concrete (1:4:8) with 4cm. Size hand broken hard Granite metal including cost of all labour,materials with all taxes, lead,T & P etc all complete
32Supply, fabrication and installation of MS Bollards made from 100 mm NB MS pipe of 1200 mm height, provided with a dome-shaped MS end cap at the top. The bollard shall be strengthened with 3 nos. of MS round bars encircling the pipe at three different heights. The surface shall be prepared and finished with one coat of epoxy primer and two coats of synthetic enamel paint, including wrapping of three nos. reflective yellow colour stickers. The work includes cost of all materials, labour, T&P, transportation, taxes and all complete as directed by the Engineer-in-Charge.
33Supply, fitting and fixing of two lines of MS chain link between bollards including proper alignment, cutting and welding as required, complete with one coat of approved metal primer and two coats of synthetic enamel paint, including cost of all materials, labour, T&P, scaffolding and transportation, etc., all complete as per specification and direction of the Engineer-in-Charge
34Form Work for concrete in structers with finish using wooden planks & bullahs etc complete
35R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete
36Supplying, fitting and placing uncoated HYSD bar Reinforment complete as per drawing and techincal specification.
37Steel work in built up (round, square or rectangular hollow tubes) trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
38( Food Kiosk Platform)Dismantling and removing 2.5 cm. thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead
39P.C.C (1:3:6) with 40mm size Crosser broken hard granite metal with cost of all labour & materials.
40Fixing of Kota tiles 16mm thick in floors on bed of cement mortar (1:4) jointed with white cement.
41(Parking)Providing and laying of hot-applied thermoplastic road marking compound of approved quality, having a thickness of 2.5 mm (exclusive of surface-applied glass beads), on prepared road surface, including cleaning and preparation of the surface, heating the material to the required temperature, mechanically laying by approved applicator, and application of reflectorising glass beads @ 250 grams per square metre uniformly on the hot surface to achieve required retro-reflectivity, complete in all respects as per IRC:35 and as directed by the Engineer-in-Charge.
42Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1700 and Annexure 1700.1
43(Toilet )Earth work in excavation of foundation in all kinds of soil within initial lead & 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth.
44Filling Foundation and plinth with available excavated Earth including leveling and watering, all labour and matrials complete.
45Filling foundation and plinth with sand watered and rammed.( per cum.)
46Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete
47Fixing,centering,shuttering R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc. in Ground Floor. ( Footing)
48Column
49R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete
50Supplying, fitting and placing uncoated HYSD bar Reinforment complete as per drawing and techincal specification.
51Brick work with K.B. bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth
52Brick masonary using Flyash bricks in CM (1:6) in Super-Structure with cost of all labour and materials, etc complete.(230x110x80)
53Parapet Wall
5416 mm thick cement plaster in (1:6) with cost of all labour & materials.
55Parapet Wall
5612mm thick Cement Plaster (1:6) for brickwork including cost conveyance and royality etc complete. (inside)
57Parapet Wall
586 mm thick Cement Plaster (1:4) to concrete surface.
59Punning per Sqm.
60Priming one coat with any approved primer (Iron work) (data for 9.3sqm.) (per sqm.)
61Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor.
62Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even receive painting including cost of scaffolding surface to staging charges with cost of all materials taxes, labour T&P etc complete.
63Supplying ,Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface at all elevations including all material & labour complete at all floors and all heights as per the direction of Engineer-In-Charge .
64Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor.
65Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade in Ground Floor including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.
66Providing, fitting and fixing Vitrified tile in floor of size 600x600 mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar 1:4 (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-In-Charge (for New work only)
67Supplying, fitting & fixing of 30cm x 30cm/40cm x 40cm special plain/printed series Ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755. in floors laid on 20 mm thick cement mortar (1:4)(1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
68Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4)(1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete per direction of the Engineer-in-charge
69Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles.
702.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work per 1 sqm.
71Supplying M.S. Grill, Gate made out of angle,flat and square bar including cost of transportation, taxes, painting Two coats enamel paint, one coat of priming etc.all complete. As per approved design and Direction of Engineer - In- Charge. (per Kg.)
72Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
73Providing all materials, labour, T & P for fitting and fixing of following size of 12 mm thick toughened glass for urinal partition of approved make in all floor with edge moulding & polishing with chromium plated brass screw, G/W Brackets 900 ( Double sided back plate) of DORMA make with all taxes, duties & transportation etc. All complete as per specification & direction of Engineer-In-Charge
74Supplying, fitting and fixing of Stainless steel of 316 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
75(Toilet Block Electrical Work ) Recessed wiring to light point/Fan Point/Exhaust Fan Point/ Call Bell point with 1.5 Sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal Box having front Modular cover of suitable size, Metal box with 1.5 Sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S)
76Group-A-L.P F.P- C.B.P-
77Group-B-L.P F.P- C.B.P-
78Supply and fixing of Modular switch, socket, etc
796 Amp Switch (Modular Type)
806 Amp Socket
8116 Amp Switch
8216 Amp Socket
83Ceiling Rose
84Exhaust Fan 9\\" size
85Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outletand 16Amp Modular switches connection (make-Anchor/ Legrand /Roma)
86S/F of 12watt Square Surface down light LED fitting (Make- Havels/Philips/Bajaj/Crompton/Helonix) ( GT- 04, LT- 04, PHT-02)
87S/F of 32 AMP 25KA MCCB' of Hager Make with both side connections with all complete.
88( Septic Tank)Earth work in excavation of foundation in all kinds of soil within initial lead & 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth. Septic Tank-11x3.3x1.2
89Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete.
90Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C.
91Filling of 12mm aggregate in soak pit
92R C.C. M-25 grade with 20mm and down grade b.h. granite C.B. chips of approved quality from approved quarry including watering, curing, cost, carriage, royalty & taxes of all materials and labour, T&P etc complete
93Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete.
94Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( 230mm wall)
95Supplying and fixing 500 mm dia C.I cover (medium duty) without frame for manholes. Weight of the cover not less than 58 kg.
96( Hordings)Steel work in built up (round, square or rectangular hollow tubes) trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
97Erection of hoarding board structure of 12.00 metre height, including unloading of fabricated MS structural members, shifting to site, lifting, placing in position, plumbing, alignment and fixing of posts, bracings and hoarding frame complete, by means of crane / hydra / winch, scaffolding and other required tools & plants, including labour charges, safety arrangements and all incidental charges, but excluding cost of materials, foundation, painting and hoarding display, complete as per direction of Engineer-in-Charge.
98LED flood light (50watt)
99Copper cables armoued XLPE insulated (3cx2.5sqmm)
100Digital timer Switch
101Earth work in excavation of foundation in all kinds of soil within initial lead & 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth
102Filling in foundation and plinth with filling sand, watered and rammed including cost of material, labour, royality and transportation etc. complete as per specifications and as directed by Engineer-in-charge.
103R.C.C. work of M-30 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying
104Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
105( Electrification)Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha)
1066sq.mm 2core
10710sq.mm 4core
108MV cable laying up to 25 sq.mm in ground with out sand and cover
109S/F of PVC T/C U.B almn. Wire with No.10/12SWG G.I supporting wire
110S/F of Copper Wire 2 X 1.5sq.mm +1 X 1.5sqmm
111Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
112Standard earthing as per Govt. spcn.
113S/F of No.8 G.I wire as earth continuity
114Supply of 6Mtr height decorative M.S Pu painted, bottom part 114mm top 76mm OD, base plate of size (250mmX250X12mm) with 4nos of M20 foundation bolts. (Make- K-Lite, RR Ispat, Havells, Utkars or equipvalent) as per the direction of Engineer-in-charge.
115Supply & fixing of 40W LED Post Top Larnten luminari decorative light. (Make - Crompton, Havellls, Bajaj, Philips, Helonix, Panasonic) as per the direction of Engineer-in-charge.
116Supply, fitting, fixing of 10Watt LED bollard light including all materials. (Make - Crompton, Havellls, Bajaj, Philips, Helonix, Panasonic) as per the direction of Engineer-in-charge.
117Supply and Installation of outdoor Feeder Panel (63 Amp - Contactor- 1No, 63Amp DP MCB-1 No, 63Amp SP MCB-2 Nos, Digital Timer- 1No with all accessories complete wiring to be assemble in 6sq.mm copper wire etc) as per the direction of Engineer-in-charge.
118Supplying of upto 63mm HDPE PVC Pipe Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58507151
AUTHORITY Local Bodies
TENDER VALUE 2.41 Crore
LAST DATE 30-11-2026
Authority
Authority Name Municipal Bodies
Work Description Tender for Development Of Street Food Hubs Proposal
Basic Detail
Tender No BMC(BAM)/339/2026-27
Bidding Type Tender
Location
City Ganjam
State Odisha
Key Dates
Publish Date 18 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 2.41 Crore
Tender Fee 11800
EMD 2.41 Lakhs
Exemption Available
Document List
312d7583-3517-4e04-a49e-2bd04f568bfc.html
BOQ_620266.xls
DTCN.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 8 days
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

312d7583-3517-4e04-a49e-2bd04f568bfc.html

xls

BOQ_620266.xls

pdf

DTCN.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender