Tender For Providing New Borewell, Motor And Accessories At Agineshpuram Mettutheru In Koovathur Panchayat In Andimadam Block Of Ariyalur District Under Vpgf 2026-27
Tender Value
12 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
14 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ariyalur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing New Borewell, Motor And Accessories At Agineshpuram Mettutheru In Koovathur Panchayat In Andimadam Block Of Ariyalur District Under Vpgf 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Geophysical survey charges including conveyance charges for the Geo-physical instruments and other accessories etc., Complete |
| 2 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site including construction of mud pit. |
| 3 | Upto 60m depth below ground level |
| 4 | From 60m upto 90m depth below ground level |
| 5 | From 90m upto 120m depth below ground level |
| 6 | From 120m upto 150m depth below ground level |
| 7 | Reaming 200 mm dia pilot bore to 300mm dia bore as directed by the Departmental Officers. |
| 8 | Upto 60m depth below ground level |
| 9 | From 60m upto 90m depth below ground level |
| 10 | From 90m upto 120m depth below ground level |
| 11 | From 120m upto 150m depth below ground level |
| 12 | Reaming 300 mm dia pilot bore to 400mm/450mm dia bore as directed by the Departmental Officers. |
| 13 | Upto 60m depth below ground level |
| 14 | From 60m upto 90m depth below ground level |
| 15 | From 90m upto 120m depth below ground level |
| 16 | From 120m upto 150m depth below ground level |
| 17 | Supply and Delivery Conveyance of all following sizes of PVC casing pipes & specials to site as per IS 12818 /1992. |
| 18 | 200mm dia OD PVC Plain Pipe (Medium depth) |
| 19 | 200mm dia OD PVC Ribbed screen pipe (Medium depth) |
| 20 | 200mm dia PVC end cap |
| 21 | Labour Charges for inserting 200 mm dia (M.S. Casing pipes assembly with slots or with out slots) in the drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer |
| 22 | Charges for developing the Borewell with air compressor of 600 CFM capacity including transportation labour and fuel charges for compressor and as directed by the Department officer and conducting yeild test by \\"V\\" notch methods |
| 23 | Supply, Delivery of Submersible Pumpset suitable for Bore Well conforming to I.S.Specification for the following duty conditions.10HP X100 LPMX 100 Three Phase |
| 24 | Supply, Delivery of Pannel Board with necessary fittingssuitable for Submersible Pumpset for the following duty conditions.For 10.00 Hp |
| 25 | Supply, Delivery of the following size of the flat PVC 3core Copper conducted cable conforming to I.S.694/90 suitable for submersible pumpset 4.00sqmm core flat copper cable |
| 26 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rulesetc.,complete and testing thepumpset and trail run for 10 days. (Above5.00 HP to 10.00 HP) |
| 27 | Bore cap using M.S. Flat of size 10mm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) (8 “ Casing Pipes) |
| 28 | Supply and Delivery of 63mm HDPE Pipe |
| 29 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for this work} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender