Tender For Construction Of Building For Tamilnadu State Institute Of Disaster Management With Administrative Office, Hostel Facilities And H.T Room At Sardar Vallabhai Patel Road, Guindy, Chennai-32
Tender Value
78.10 Crore
Estimated cost
Bid Submission
18 Dec 2026
29 days left
EMD
39.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Building For Tamilnadu State Institute Of Disaster Management With Administrative Office, Hostel Facilities And H.T Room At Sardar Vallabhai Patel Road, Guindy, Chennai-32
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Upto 2.40m Depth. |
| 3 | Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting in- clusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Upto 2.40m Depth. |
| 5 | Above 2.40m to 3.30m Depth. |
| 6 | Above 3.30m to 4.20m Depth. |
| 7 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc.complete complying with standard specification and as directed by the departmental officers. |
| 9 | Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers. |
| 10 | Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying and filling in basement with Stone dust (Quarry dust) in layers of not more than 15 cm thick, well rammed watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 12 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory soil compactor to achieve the desired density, complete as per clause 401 |
| 13 | Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam required thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory soil compactor to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 14 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 15 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 16 | Centering for curved RCC Beam surfaces upto 3.60m height |
| 17 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 18 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 19 | For circular columns |
| 20 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid) |
| 21 | Providing and laying in position, standardised concrete Mix M-20 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Worksite, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 22 | Foundation and basement |
| 23 | Stilt floor |
| 24 | Providing and laying in position, Standardised Concrete Mix M-30 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 25 | Foundation and basement |
| 26 | Stilt floor |
| 27 | First floor |
| 28 | Second floor |
| 29 | Third floor |
| 30 | Fourth floor |
| 31 | Fifth floor |
| 32 | Sixth floor |
| 33 | Seventh floor |
| 34 | Eighth floor |
| 35 | Nineth floor |
| 36 | Tenth floor |
| 37 | Providing and laying in position, Standardised Concrete Mix M-35 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 425 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 38 | Fifth floor |
| 39 | Seventh floor |
| 40 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 41 | upto plinth/ Basement level: |
| 42 | Ground floor |
| 43 | First floor |
| 44 | Second floor |
| 45 | Third floor |
| 46 | Fourth Floor |
| 47 | Fifth Floor |
| 48 | Sixth floor |
| 49 | Seventh floor |
| 50 | Eighth floor |
| 51 | Nineth Floor |
| 52 | Tenth Floor |
| 53 | Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately. |
| 54 | Damp proof course as per IS 3067:1988 with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality Integral liquid water proofing compound conforming to Indian Standard specification as specified by the de- partmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification - Manual Mixing |
| 55 | Brick work in Cement Mortar 1:5 (One Cement and five CS Sand) using best quality II class ground moulded chamber burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" including including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers |
| 56 | Foundation and basement |
| 57 | Stilt Floor |
| 58 | First floor |
| 59 | Second floor |
| 60 | Third floor |
| 61 | Fourth floor |
| 62 | Fifth floor |
| 63 | Sixth floor |
| 64 | Seventh floor |
| 65 | Eighth floor |
| 66 | Nineth floor |
| 67 | Precast Concrete Block masonry using Autoclaved Cellular Aerated Concrete Block of size 600x200x200mm conforming to IS 2185 (Part 3) : 1984 with Self Curing AAC Joint Mortar for Partition Wall of non load bearing type in accordance with IS 6041:1985 including neat finishing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 68 | Stilt floor |
| 69 | First floor |
| 70 | Second floor |
| 71 | Third floor |
| 72 | Fourth floor |
| 73 | Fifth floor |
| 74 | Sixth floor |
| 75 | Seventh floor |
| 76 | Eighth floor |
| 77 | Nineth floor |
| 78 | Tenth floor |
| 79 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 80 | Paving the floor with best approved quality Fine Polished Blue Pearl Granite Slab 1200mm x 600mm, 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 81 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 82 | Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and below 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 83 | Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2)(Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint.The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete |
| 84 | Supplying and fixing fine polished Cuddapah Slab 20 / 30mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers |
| 85 | Providing Double nosing to granite slab at the edges of the Horizontal & vertical space with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete |
| 86 | Providing semi nosing to granite slab at the edges of the Horizontal & vertical space with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete |
| 87 | Providing grooving to granite slab at the intermediate edges of the vertical face with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete |
| 88 | Providing and laying Double charged vitrified tiles of size 800 × 800 mm, 9–10 mm thick, of approved make Kajaria / Somany or equivalent, in approved colour, shade and design, with glossy/glassy or matt finish, rectified edges, water absorption not exceeding 0.5%, laid using approved polymer-modified tile adhesive/over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry , including preparation of surface, cutting, spacers, joint filling with matching epoxy/ grout, cleaning and finishing complete as per manufacturer's specifications and directions of the Engineer-in-Charge. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 89 | Providing and laying anti-skid matt-finish vitrified floor tiles of size 600 × 600 mm, 8–10 mm thick, of approved make Kajaria / Somany or equivalent, with water absorption not exceeding 0.5%, in approved colour, shade and design, having suitable slip resistance for wet bathroom floors. Tiles shall be laid over the prepared cement mortar/screed bed using approved polymer-modified cementitious tile adhesive conforming to IS 15477, including cutting, shaping around floor traps and pipe openings, maintaining uniform joints, filling joints with approved waterproof epoxy grout, providing proper slope towards floor traps, cleaning and finishing complete, including all materials, labour, tools and incidental charges as directed by the Engineer-in-Charge. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 90 | Paving the floor with Tactile paver of New Tek BT Yellow colour ceramic tiles of size 300x300x15mm for guiding/warning Tactile signal for persons with vision impairment in all floors over a base layer of Cement mortar 1:3 (One cement and Three Sand) 20mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg/m2 neatly in allfloors,curing etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 91 | Flooring with Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) (The Sample should be got approved by the Executive Engineer before execution of works). |
| 92 | Dadooing the walls with Vitrified tiles of size of 1200mm x 600mm x 10mm of approved make Kajaria / Somany or equivalent and above set in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10mm thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) (The Sample should be got approved by the Executive Engineer before execution of works). |
| 93 | Granite wall clading with pre polished ruby red granite slab of size 1200x600 of 18 to 20mm thick conforming to IS 15622 in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The granite should be got approved by Executive Engineer before use on works) (The Sample should be got approved by the Executive Engineer before execution of works). |
| 94 | Providing granolithic floor finish of the 50mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 95 | Extra for vaccum dewatering in fresh concrete works 80 to 120mm thick by levelling with double framed screed vibrator finishing with power floatter and power trowel and indentical works etc., complete and as directed by the departmental officers. |
| 96 | Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of material, labour and handling etc. as directed by departmental engineers at site of work and as per standard specification. |
| 97 | Laying of screed concrete using Cement concrete mix 1:2:4 ( one cement, two sand and four hard broken stone jelly) using HBGS 6-12mm ISS metal for wearing coat including laying, compacting, finishing and curing etc., complete as per standard specification and as directed by the departmental officers |
| 98 | Paving the Top of roof with Solar refelective ceramic tiles size 305mm x 305mm x 7mm of approved quality with solar reflective index (SRI) value of equal or more than 80 and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before execution of works) |
| 99 | Providing Anti-termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 Part I to IV in stages to suit the progress of work as per the detailed specification as below. (Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing, etc., complete and as directed by the departmental officers. (The chemical should be got approved by Executive Engineer before use on work). |
| 100 | Stage-1: Spraying anti-termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation. |
| 101 | Stage-2: Spraying anti-termite chemical solution to the grade beam level, spraying has to done for the grade beam, brick masonry contact with the back fill earth. |
| 102 | Stage-3: Spraying anti-termite chemical solution on the sand for the flooring before laying the flooring concrete. This treatment has to be carried out on the sand filling by making holes with crow bar to a depth of 60cms and at 60cms intervals on both direction and at junction of wall and flooring thoroughout. |
| 103 | Stage-4: Spraying anti-termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be closed after the treatment |
| 104 | Providing and laying water proofing treatment to the Retaining wall, water retaining structures outside with fully bonded 1.6mm Thick SBS modified self-adhesive, cross laminated HDPE lining waterproofing membrane, conforming to IS 16471:2017 Type A, requirements of UG waterproofing structures, The SBS membrane shall have Mass per Unit Area > 1.8 Kg/m2 as per ASTM D 5147, Puncture resistance > 200 N as per ASTM E 154, Elongation > 180% as per ASTM D 412-06, Tensile Strength > 4 Mpa as per ASTM D 412- 06, Tear resistance> 20 N/mm as per ASTM D 4073, Hydrostatic pressure> 50M as per DIN 1048. The lap with HDPE membrane shall be 100mm treated with TS tape. followed by the installation of 8-10mm THK polyethylene dimpled drain board having compressive strength > 400kN/m2 (as per ISO 25619-2). The finished cost includes surface preparation, making coving and a coat of solvent based bituminous primer @ 0.25l/m2 on entire surface before laying membrane completely as per specification. |
| 105 | Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied @ 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break >50% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. |
| 106 | Brick Jelly Lime Concrete of 1:2:5 (One Lime,Two Sand and Five Brick jelly ) with 40 mm hand broken brick jelly for Sunken portions including dewatering wherever necessary and laid in layers of not more than 15cm thick, well rammed, consolidated and curing etc. complete complying with standard specification. |
| 107 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 108 | Supply and laying of 45 GSM alkaline resistant coated fibre glass mesh having grid size 2.5mm x 2.5m x 0.3mm, high tensile strength > 600 N/5cm, Resign Content > 18% for the AAC Blockwork between each layers for the width of masonry (Horizontal Surface) etc complete |
| 109 | Supply and laying of 45 GSM alkaline resistant coated fibre glass mesh having grid size 2.5mm x 2.5m x 0.3mm, high tensile strength > 600 N/5cm, Resign Content > 18% for the plastering surface on the AAC Blockwork (Vertical Surface) etc complete |
| 110 | Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 111 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 112 | Stucco plastering 12mm thick using blue granite chips of size 10mm and below over a base plastering with cement mortar 1:5, 12mm thick, etc., complete complying with standard specifications |
| 113 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers.(The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before use on work |
| 114 | Providing the texture finish to the newly plastered wall with ready made texture putty with patterns at all levels including the cost of coating, labour charges and other incidental charges etc., complete as directed by the departmental officers. |
| 115 | Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work). |
| 116 | Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers. |
| 117 | Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers. |
| 118 | Supplying and fixing Teakwood frame with scantling above 2m for doors including labour charges for wrought and putup and fixing holdfast in frame etc., complete complying with standard specification and as directed by the departmental officers |
| 119 | Supplying and fixing in position of Teak wood door shutter using spl quality teak wood planks of 40mm thick panelled doors with ornamental designs,engraving and kadasal wherever necessary including required raw materials,Brass hinges,Brass tower bolt,ornamental Brass handles, Door stopper,Brass aldrops and bush with suitable locking arrangements etc. The rate should be inclusive of cost of all materials, labour charges for wrought and put up the doors with transporting charges etc complete complying with standard specification and as directed by the Departmental officers. |
| 120 | Supplying and fixing Solid Core Flush Shutters with Laminate sheet on both side with teakwook lipping alround 35mm thick conforming to IS 2202- 1(1999) including cost of wind appliances and furniture fittings such as 3 Nos SS 304 Grade Butt Hinges of size (125mm x 30mm) , 2 Nos .300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers (The Sample should be got approved by the Executive Engineer before execution of works). |
| 121 | single leaf |
| 122 | Supplying and fixing Solid Core Flush Shutters with Laminate sheet on both side with teakwook lipping alround 35mm thick conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Butt Hinges of size (125mm x 30mm) , 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers (The Sample should be got approved by the Executive Engineer before execution of works). |
| 123 | Double leaf |
| 124 | Polishing the teakwood panelled door / Windows/ Ventilator with best melamine varnish finishing including labour charges for scrapping T.W panelled throughly on both sides of the door, sand papering without affecting the teakwood plank grooves and natural design with preparation of surface using sand paper and finishing the smooth wooden surface and applying of melamine polishing on the teakwood panelled door/ partition surface using spray machine on uniform layer of smooth surface formed without any air bubbles after finishing the work etc., the rate inclusive of cost of materials ,labour charges ,transportion charges, labour for scrapping charges, etc complete complying with standard specification and as directed by the departmental officer (the materials quality are approved by the EE Before use of work. |
| 125 | Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/Cub.Mt. & shore hardness of 55.The door shall be a plain matt board as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4” in SS (Sliding door) etc., complete and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 126 | Supplying and fixing the WPC door shutter with frame using 75mmx40mm solid outer frames, its covered with 25mm thick solid PVC sheets for shutter paneelling shall rigidly fixed in position, The rate includes for transport, fixing with necessary furniture fitting such as 3 nos 4\\" Stainless steel butt hinges, 2nos 6\\" Stainless steel tower bolts,2nos 4\\" Stainless handle, etc., complete complying with standard specification.Thickness: 25mm thick (The Sample should be got approved by the Executive Engineer before execution of works). |
| 127 | Providing, supplying & fixing of glazed 3 Track- 3 Panel Sliding Window made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron of 120 GSM profiles through out the window. The sliding outer frame having a overall size of 108 x 45 mm with reinforcement of 1 mm thickness, super sash with overall size of 39 x 75 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size 39 x 75 mm reinforced with 1.5 mm of GI.Glazing bead for fixing of glass shall be of size 20 x 18mm and coextruded with gasket. Composition of profile shall consists a minimum of 6 PHR of TiO₂ for every 100 parts of PVC resin. Fiber Glass mesh shall be provided in mesh shutter. Window/Door shall be provided with 6 mm plain float glass, standard hardware & single point locking system of Flush lock. Wall thickness of frame & sash shall be 2 - 2.2 mm. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. complete as per standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 128 | Supply and installation of two-track sliding uPVC windows shall utilize uPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 60mm x 52mm, a shutter of 66mmx 42mm x 50mm, an interlock of 45mm x 36mm,and a glazing bead of 24.5mm x16mm. All frame, sash, and mullion profiles shall be reinforced, where required, with a 1mm thick GI steel section, and windows are to be equipped with security devices such as touch locks or crescent locks, nylon rollers, and an aluminium track, all compliant with relevant specifications and departmental directives. Glazing shall consist of 5mm thick Plain or Pinhead glass, secured by TPE (Grey) weather-sealed gaskets,while all corners and mullion joints of the frame and sash shall be mitred cut and fusion welded without mechanical joints, with all welded joints neatly trimmed to a grooved nib finish, ensuring sharp-edge-free products. The complete window units shall be fixed into pre-finished openings by drilling and fastening through the outer frame with high-quality fasteners, and silicon sealant shall be applied to fill the gap between the wall and window frame for a leak-proof installation and complete finish etc., Complete and as directed by the department officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 129 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type profile separate openable shutter fixed to the main frame, Specification: profile colour:White,Outer :62mm outer frame,OuterRI :34.5mmx22.50mm-1.20mm,Ri-35.5mmx22.5mm-1.20mm,MullionRI:Ri-34.5mmx22.50mm(Pr12- 09B) and glass used :Double Glazed Performance glass, GLASS: 18 MM INSULATING GLASS DOUBLE LAYER: [(LAYER 1: HEAT STRENGTHENED FLAT GLASS 6MM SKN 165 GLASS ROUGHGRINDING FLAT HS COATING ON SURFACE #2-TPRS HS CE BLACK COLOUR WITH LOGO (R)) + ( 8MM SPACER BAR AIR GAP-6MMBYTE WITH DOW SEALENT ) + (LAYER 2: TOUGHENED FLAT GLASS 4MM CLEAR GLASS ROUGH GRINDING FLAT TEMPERED -TPRSTUFF ISI CE BLACK COLOUR LOGO (O) ] TPRS ECOSAFE all complete for the required performance, as directed by the engineer -in - charge.The glass made of having properties as visible Light transmittance (VLT) of equal to greater tha 0.7%, Solar heat gain coefficient less than or equal to 0.40 and U value of equal to or less than 2.0 W/m2 etc. The IGUs shall be assembled in the factory/ workshop of the glass processor,Locking:Multi-point,Handle color:White,Friction:Friction stay 12 inch,Handle type:Casement ESPAG Handle with 2D Hinges. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 130 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI 1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 5.50mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 131 | Structural Glazing:Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm.Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement. Polyurethane brackets should be used to connect horizontal section to vertical sections.Silicone: Natural cure, with good UV resistance to be used.The above frame should be fixed to brick / concrete masonry by using nylon self–expanding cap and driving MS electro plated 80mm long screws into the caps through frames.Glass: 5mm reflective Saint Gobain OR equivalent. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 132 | Fabricating, Supplying and fixing in position Mosquito net arrangements of Openable type. The Outer frame shall be made with Powder coated Aluminium Natural colour matt finishAluminium Hollow section of size 31mmx40mmx1.55mm. The Vertical center Mullion made with Aluminium Hollow section of size 55mmx11mmx1.55mm.The Horizontal and Vertical Aluminium Hollow section Shutter frame of size 31mmx13mm with a thickness of 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the shutter with a size of 10mmx11mmx1.55mm. The Epoxy coated Stainless Steel 304 grade wire mesh with dia of 0.19mm shall be provided for Net. The U shaped Aluminium handle provided in the each shutter with a size of 19mmx26mm. The Connection Mechanism between Shutter and Outer frame that enables opening the Mosquito net. The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed. All the Aluminium sections are to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc.complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 133 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer |
| 134 | Manufacturing, supplying and fixing of Steel doors with following specification. MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18 G CR Sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 Nos, for shutter is provided. 6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided. |
| 135 | 250x16mm size of Two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of M.S. handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete. |
| 136 | Supplying and Erecting Gear Operated Type Rolling Shutter / Grills with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc |
| 137 | Supplying and Fixing Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like DYNA (or) equivalent (with ISI Monogram) (The Sample should be got approved by the Executive Engineer before execution of works). |
| 138 | Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including cutting the members, welding, grinding, one coat of priming coat using best approved quality red oxide primer, dismantling of walls / concrete if necessary, fixing and finishing the dismantled portion to original condition etc., complete complying with standard specification. |
| 139 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 140 | Rubber Speed breaker of size 75mm thick with reflectors including cost, conveyance and all other incidental charges etc., complete as per standard specification |
| 141 | Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work. |
| 142 | Supplying and fixing vertical blinds of approved premium quality colour and brand fixing in position of vertical blinds with Aluminium alloy head nails of 32mm wide 34mm height with anodised finish of 1.20mm thick control units corner fitter,filt bottom weight with cord weight scotch cort fabric with 100mm width, with complete fittings including labour charges for making and fixing position etc,complete and as directed by the departmental officers. |
| 143 | Supplying & Installing CURTAIN BLINDS with Sunscreen perforated Roller blind optima series Basket 125 Tex with fabric specification of (Fabric compositition polyster 22% and PVC 78%, Openenss Factor-5%, Thickness -0.68MM +/-5%, weight per m2 -480 GSM, yarns count in wrap/weft/cm 19/18+/-5%, Fire Resistance-FR(USA) KFI(Korea), Tear Resistance-wrap11.9 daN+/- 5%,WEFT 150 daN+/-5%,colour fastness-6-7/8 (white colour base), artificial llight xenon lamp, UV resistance Min3 (White colour base), width 2.5M & 3 M. The Roller mechanism shall be a moulded unit made from engineering grade plastic polymer with PVC spring support. The Fabric shall be attached to the roller tube with high quality self adhesive tape with manual operation. The fabric shall be attached to the tube with adhesive strip. It should have minimum one ton fabric which must be placed on the roller before the working section of fabric start Operational action shall be smooth including necessary hardware for fixing at all places & as directed by Engineer-in-charge etc complete. The rate is inclusive of laying, conveyane, all other Tools and Plants involved in the work charges and all other incidental charges etc. complete and as directed by the departmental officer (The materials quality, brand, colour, shade should Be approved by the Executive Engineer before use on works). |
| 144 | Supply and fixing of GYP Board false ceiling using 12.5 mm thick of approved quality and design suspended from the ceiling using \\"U\\" shaped Galvanised iron channels at 1.20 M centre to centre on both longitudinal and cross direction for vertical support and fixing \\"U\\" shaped G.I channels at 0.90 m centre to centre on longitudinal direction respectively for horizontal support by using T.W reapers at corners and at intermediately and fixing of plaster of paries on the panel provided as per design / patttern given by the site officer and finishing the ceiling surface with some plaster of paries materials etc. Necessary openings should be made for providing spotlights, florescent tubes in the ceiling by using plywood 12 mm thick and opening should be covered with Acrylic panel complying with standard specification and as directed by the departmental officers etc. complete. All the materials should be got approved before use on work by the Executive Engineer.The rate is including two coats of plastic emulsion painting over the wall coat primer etc., complete. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 145 | Supplying and fixing with new design ornamental sound proof Armstrong grid false ceiling arrangements with alu. anodized T section and L angle frame work grid of size 60x60cm with Aluminium T section 25x25x2.8mm L angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dia M.S rods with suitable threaded nuts, suspended rod and hanging from ceiling at 1.20m c/c in longitudinal section and 60cm at middle portion 60x60cm panel should be covered with 12mm thick Armstrong sheet in grid so as to give neat finishing etc., complete complying with standard specification and as directed by the Departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 146 | Supply& installationof Wall panelingusingSalonSpots MP1made of pinewood E1grade fiberboard, with1mm circluar micro-perforations in 2mm pitch, melamine laminated finish, 5-test fire retardant grade, size 600x1200x16mm, Square edge, volume density of base board 800Kg/m3, weight 12Kgs/m2 installed by using . Strut framework system and . Strut Z bar. . Strut framework system includes . Strut CC25 Cross Channel having thickness 0.55mm, length3600mm, knurledweb 35, depth20mmandequal flanges15mmis fastened to wall positioned vertically ina regular manner at 600mm c/c..Strut Zbar having 40mm height, thickness1mmis first fixed behind the panels by using suitable fasteners. Another length of Strut Zbara rethen installed over Strut CC25horizontallyat spacingsoas tomatchwithStrutZ bar at rear of Spots MP panels. Spots MP panels of size 600x1200x16mm arethen slide din to th eStrut Zbar fixed on Strut CC25. Long edges of panels should be perpendicular to. StrutZbar and Shor tedge sof thepanel are staggered. Panelsarebacklinedwith.SynthPF10x25 held in position with dab spots of .Stick S7 Fire(Class)–1 & P Acoustics–NRC upto 0.85, Thermal conductivity (W/mk)–na,Climate(°C,RH)–40,70, Light reflectance (%) – Colour Dependant,Green (VOC, RC %) – Low, 25 (The Sample should be got approved by the Executive Engineer before execution of works). |
| 147 | Supply and installation of Wall paneling system consisting of FR Grade,customised printed fabric-based membrane with high-performance Polyester core and acoustically printed surface finish size 1.4mx75m,stretched by using combination of . Strut CC50 Cross Channel and . Strut FS15Tracks, . Strand1 primer, 12mmwooden base, . SynthPF 10x25 infill with requisite accessories.First framework on wall to be erected by contractor (frameworknotby. asto achieve desired profile and finish level as per arch dwg.Woodenbase12mm is the ninstalled on frame work behind along the marking lines withmetal fasteners at 300mm centres. FE 15 tracks to be installed on wooden base, by first applying Stick S7adhesive on both surfaces for a true and continuous secure grip,and heavy-duty fasteners at 150mm centres on one/both sides of .Strut Tracks. .Strand 1 primer, square edge, magnesite bonded pinewood fiber panels of size 600x1200x20mm having density 400kg/m3, weight 6kg, Green Pro certified, is fixed to framework behind in between tracks by using suitable fasteners. SynthPF 10x25mm is adhered. Strand 1 primer by using dabspots of .StickS7 adhesive.This completes the substrate to receive the Stretch Dekor Grafix acoustical fabric.The . Stretch Dekor Grafix acoustical membrane of width1.4m is stretched and tucked into the . Strut Tracks and secured to the locking jaw swith purpose-specific tucking tools to obtain smooth, taut, wrinkle-free finish. Ensureminimum 5mm airgap is maintained in between SynthPF and Dekor fabric. Ensure the weft and weave of the fabric along with the surface are all oriented in one direction to achieve uniform shade. Note:Minimum 100mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300 mm Note:Adjacency printing for larger images across mid-seam tracks is possible. Alignment of fabric is vital!B14 Technical Parameters Fire (Class)–1& P, Acoustics–NRCUpto 0.75, Thermal conductivity (W/mk)–0.07, Climate (°C, RH)–50, 90, Light reflectance (%)–Print dependant,Green (VoC, RC %) – Low, 25 (The Sample should be got approved by the Executive Engineer before execution of works). |
| 148 | Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 149 | Supplying and fixing of fluted wall panelling using 2''x1'' Aluminium Channel 2''-0-- interval on single directed and fixing to the existing wall portion and fixing 12mm water proof plywood of approved quality and colour with grooves and finishing with 5.00mm thick fluted panel etc., complete complying with standard specification and as directed by the departmental officers at site of work. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 150 | Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying tostandard specication. |
| 151 | Providing & Fixing Staircase hand rail for staircase made out of 50.80mm dia stainless steel tube of 1.60mm thick at required locations to a height of 1000mm from finished floor level, welded to 38.10mm dia S.S.tube post of 1.60mm thick as vertical at 1m centre to centre with 3 nos of 25.40 mm dia horizontal S.S.tubes of 1.60mm thick in between as per details shown in the drawing and as directed. Rate shall include for grouting into concrete with necessary supporting arrangements in hand rail vertical and in floor, welding the base cup of post into slab reinforcement polishing.buffing and protecting the hand rail surface etc.complete as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 152 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete (The Sample should be got approved by the Executive Engineer before execution of works). |
| 153 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 154 | 160 mm dia pipe |
| 155 | 110 mm dia pipe |
| 156 | Providing the safeguard for the columns for 1m height with rubber corner guard of 3\\"x3\\" L type colour of black and yellow approved quality etc. complete complying with standard specification and as directed by the departmental officers. |
| 157 | Manufacturing, supplying and fixing of GFRC (Glass Fibre Reinforced Concrete) decorative cornice work for external elevations, of approved design, size and profile, including mould preparation, casting, finishing, MS/GI support brackets, anchor fasteners, transportation, scaffolding, erection, jointing, sealing, primer, putty and two coats of approved exterior-grade weather-resistant paint. The rate shall include all materials, labour, accessories, fixing arrangements, tools, plants and incidental charges required for complete execution as directed by the departmental officers. |
| 158 | Providing, manufacturing, supplying and fixing GFRC (Glass Fibre Reinforced Concrete) handrail of approved design and pattern, having an overall height of 1.20 m, comprising bottom railing of 140 mm height, top railing of 145 mm height and balustrades of size 150 mm × 150 mm with 715 mm height, including suitable MS supporting framework of approved sections, cutting, welding, fabrication, brackets, clamps, fasteners and anchoring arrangements. The GFRC components shall be properly moulded, cast, cured, roughened and smoothened to obtain the required shape and finish. The MS framework shall be treated with anti-corrosive primer and finished with approved enamel paint. GFRC surfaces shall be finished with primer, putty and two coats of approved exterior-grade emulsion paint. The rate shall include preparation of moulds, materials, manufacturing, transportation, loading, unloading, labour, erection, fixing, scaffolding, tools and plants, finishing and all incidental charges, complete as per the approved drawings and instructions of departmental officers. |
| 159 | Providing ornamental Sthapathi band of width 150/100 mm (two steps) (Shape and size should be directed by the Engineer-in charge of works ) using Cement Mortar 1:2 (One cement and two cement).The shape and size adopted as per the approved drawing and as directed by the departmental officers etc.,complete. |
| 160 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit. |
| 161 | Upto 60 m Depth ending below ground level |
| 162 | From 60 m upto 90 m Depth ending from ground level |
| 163 | From 90 m upto 120 m Depth ending from ground level |
| 164 | From 120 m upto 150 m Depth ending from ground level |
| 165 | From 150 m upto 180 m Depth ending from ground level |
| 166 | Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer. |
| 167 | Upto 60 m depth ending below ground level |
| 168 | From 60 m depth and upto 90 mt depth ending belowground level |
| 169 | From 90 m upto 120 mt depth ending below groundlevel |
| 170 | From 120 m upto 150 mt depth ending below groundlevel |
| 171 | From 150 m upto 180 mt depth ending below groundlevel |
| 172 | Supplying of 160 mm Dia Slotted PVC pipes of 6kg/cm2 (With slot or without slot) in the drilled hole including welding the joints etc., complete supplying and packing the annular space with pebbles size and quality as approved by the EE |
| 173 | Supplying of 160 mm Dia Plain PVC pipes of 6kg/cm2 (With slot or without slot) in the drilled hole including welding the joints etc., complete supplying and packing the annular space with pebbles size and quality as approved by the EE |
| 174 | Labour charges for inserting 165 /168 mm dia PVC casing pipes assemble (with slots or without slots) in the drilled hole including jointing the pipes with PVC coupler and with cement paste etc. complete and supplying and packing the annular space with pebbles of size and qualityas approved by the departmental officers. The conveyance charges to work site to be borne by the contractor. |
| 175 | Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by ‘V’ notch method. |
| 176 | Supplying laying and jointing HDPE pipes of 10kg/cm2 for borewell motor purpose of approved quality etc., complete and as directed by the departmental officers. |
| 177 | 32mm Dia |
| 178 | Supplying and fixing of 2 HP of approved brand Submersible Pump with all accessories and 3 Phase Panel Board including labour charges etc. complete (The pump set should be got approved by the Executive Engineer before supply) |
| 179 | Supplying and fixing of 3 HP Submersible Pump of approved brand with all accessories and 3 Phase Panel Board including labour charges etc. complete (The pump set should be got approved by the Executive Engineer before supply) |
| 180 | Supplying fixing and connecting of Nylon Rope for Bore-well etc., complete. |
| 181 | Supplying fixing and connecting of 3 core 16 sqmm 1.1 KV grade armoured aluminium conductor cross linked poly ethylene insulated pvc sheathed cables conforming to IS 7098 (part I) /1988 and as amended thereafter with ISI marking etc., complete complying with standard specifications and as directed by the departmental officers. |
| 182 | Supplying, laying and jointing the following UPVC pipes - shedule 80 (brand or equivalent) of following diameter of approved quality and best variety of pipes with pressure withstsnding 10 kg/sq.cm and laid properly above ground level to alignment including fixing of required GI specials but excluding cost of such specials, cutting and threading, including fixing to walls with necessary teakwood plugs clamps and screws making holes in the wall or drilling hole in the roof and making good of the distributed portion in the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. The pipes to be painted with two coats of good variety and best quality of synthetic enamel paint over coat of red oxide primer etc. complete in all floors complying with standard specification, (The UPVC pipes shall be got approved by the Executive Engineer before use on works.) |
| 183 | 20 mm dia UPVC Pipe |
| 184 | 25 mm dia UPVC Pipe |
| 185 | 32 mm dia UPVC Pipe |
| 186 | 40 mm dia UPVC Pipe |
| 187 | 50 mm dia UPVC Pipe |
| 188 | 65 mm dia UPVC Pipe |
| 189 | Supplying, laying and jointing the following CPVC pipes (brand or equivalent) of following diameter of approved quality and best variety of pipes with pressure withstsnding 10 kg/sq.cm and laid properly above ground level to alignment including fixing of required GI specials but excluding cost of such specials, cutting and threading, including fixing to walls with necessary teakwood plugs clamps and screws making holes in the wall or drilling hole in the roof and making good of the distributed portion in the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. The pipes to be painted with two coats of good variety and best quality of synthetic enamel paint over coat of red oxide primer etc. complete in all floors complying with standard specification, (The UPVC pipes shall be got approved by the Executive Engineer before use on works.) |
| 190 | 20 mm dia Pipe |
| 191 | Supplying CPVC Specials in water supply arrangements (both in internal and external water supply arrangements |
| 192 | 20mm dia CPVC Elbow |
| 193 | 20mm dia CPVC Bend |
| 194 | 20mm dia CPVC Tee |
| 195 | Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements |
| 196 | UPVC Elbow |
| 197 | 65mm dia |
| 198 | 50mm dia |
| 199 | 40 mm dia |
| 200 | 32 mm dia |
| 201 | 25 mm dia |
| 202 | 20 mm dia |
| 203 | UPVC Bend |
| 204 | 65mm dia |
| 205 | 50mm dia |
| 206 | 40 mm dia |
| 207 | 32 mm dia |
| 208 | 25 mm dia |
| 209 | 20 mm dia |
| 210 | UPVC Tee |
| 211 | 65mm dia |
| 212 | 50mm dia |
| 213 | 40 mm dia |
| 214 | 32 mm dia |
| 215 | 25 mm dia |
| 216 | 20 mm dia |
| 217 | UPVC Coupling |
| 218 | 65mm dia |
| 219 | 50mm dia |
| 220 | 40 mm dia |
| 221 | 32 mm dia |
| 222 | 25 mm dia |
| 223 | UPVC Reducer |
| 224 | 65x50mm dia |
| 225 | 50x40mm dia |
| 226 | 40x32mm dia |
| 227 | 32x25mm dia |
| 228 | 25 x 20 mm dia |
| 229 | 20 x 15 mm dia |
| 230 | UPVC Reducer Elbow |
| 231 | 65x50mm dia |
| 232 | 50x40mm dia |
| 233 | 40x32mm dia |
| 234 | 32x25mm dia |
| 235 | 25 x 20 mm dia |
| 236 | 20 x 15 mm dia |
| 237 | UPVC Reducer Tee |
| 238 | 65x50mm dia |
| 239 | 50x40mm dia |
| 240 | 40x32mm dia |
| 241 | 32x25mm dia |
| 242 | 25 x 20 mm dia |
| 243 | 20 x 15 mm dia |
| 244 | UPVC Union |
| 245 | 65mm dia |
| 246 | 50mm dia |
| 247 | 40 mm dia |
| 248 | 32 mm dia |
| 249 | 25 mm dia |
| 250 | Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 65 mm ( 2.5 \\" ) |
| 251 | Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 50 mm ( 2 \\" ) |
| 252 | Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 40 mm ( 1.5 \\" ) |
| 253 | Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make32 mm ( 1.25 \\" ) |
| 254 | Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 25 mm (1.00”) |
| 255 | Supplying and fixing in position 150 x 100mm \\"P\\" or \\"S\\" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. |
| 256 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 257 | Supplying and fixing in position best quality and approved make Indian made White glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coats of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 258 | Supplying and fixing in position best quality and approved make under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 259 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 260 | Supplying and fixing in position White glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using |
| 261 | Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) |
| 262 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to be laid below ground level |
| 263 | 75mm dia PVC soil waste pipe |
| 264 | 110mm dia PVC soil waste pipe |
| 265 | 160mm dia PVC soil waste pipe |
| 266 | 230mm dia PVC soil waste pipe |
| 267 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 268 | PVC Elbow |
| 269 | 160 mm dia |
| 270 | 110mm dia |
| 271 | 75 mm dia |
| 272 | PVC Elbow with door |
| 273 | 110mm dia |
| 274 | 75 mm dia |
| 275 | PVC Tee |
| 276 | 160 mm dia |
| 277 | 110 mm dia |
| 278 | 75 mm dia |
| 279 | PVC Tee with door |
| 280 | 110 mm dia |
| 281 | 75 mm dia |
| 282 | PVC Y |
| 283 | 110 mm dia |
| 284 | 75 mm dia |
| 285 | PVC Y with door |
| 286 | 110 mm dia |
| 287 | 75 mm dia |
| 288 | PVC bend |
| 289 | 110mm dia |
| 290 | 75 mm dia |
| 291 | Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works). |
| 292 | 110mm dia |
| 293 | 75mm dia |
| 294 | Supplying and fixing in position best variety and approved quality heavy type 15mm dia tap following type including cost for cutting and threading of the galvanised iron pipes cotton thread shellac etc. complete complying with standard specification. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 295 | CP Pillar Tap |
| 296 | SS Long Body Tap |
| 297 | SS Two Way Bib Cock with Health Faucet |
| 298 | Swan Neck tap |
| 299 | Supplying and fixing CP Bottle Trap approved make including cost of all materials, labour etc., complete as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 300 | Supplying and fixing in position CP shower rose,CP Shower Arm with Overhead Shower Rose of approved make with necessary cutting, threading and jointing using shellac etc.,complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 301 | Supplying and fixing in position CP Wall Mixture Tap 3 in 1 system with Hand Showers with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 302 | Supplying and fixing in position Special type of mirror and frame approved quality of size 1000 x 780mm mirror fixed with brass screws, rawl plug, etc., complete complying with standard specification.(The mirror should be got approved by the Executive Engineer before use on woks) |
| 303 | Supplying and fixing approved best quality SS Towel Rack 600mm long with Lower Hanger of approved make with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The towel ring should be got approved by Executive Engineer before use on works). |
| 304 | Supplying and fixing best approved best quality brass SS soap dish holder of approved make of size 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). |
| 305 | Supplying and fixing of Jet black of 0.61*1.22m.,18/20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc.,complete complying with standard specifications. |
| 306 | Construction of Inspection chamber or manhole of the following size including necessary earth work excavation in all soils to full depth as may be directed with sand filling at bottom of the chamber for 10cm thick, concreting CC 1:5:10 using 40 mm guage HBGs jelly 10 cm thick and sode walls 9\\" thick brick work in cement mortar 1:5 using Second class ground moulded chamber bricks of size 9” x 43/8” x 23/4” filling the size of foundation with excavated earth, plastering with cm 1:3 20m thick for inside and bottom and making necessary benching with brick jelly cement concrete to the required slope and finishing neatly etc., complete. |
| 307 | Inspection Chamber of Size 0.60 x 0.60 x 0.60m (average depth) |
| 308 | Inspection Chamber of Size 0.60 x 0.60 x 0.90m (average depth) |
| 309 | Inspection Chamber of Size 0.75 x 0.75 x 1.20m (average depth) |
| 310 | Inspection Chamber of Size 0.75 x 0.75 x 1.50m (average depth) |
| 311 | Supplying and fixing in position of Steel fibre reinforced cement concrete (SFRC)manhole / inspection chamber cover slab with frame of following sizes including necessary labour charges for fixing the frame in position over the cement mortar base and finishing the joints etc. complete complying with standard specification and as directed by the departmental officers. |
| 312 | 600x600mm cover slab |
| 313 | 750x750mm cover slab |
| 314 | Supplying and fixing of PVC mould CI Steps of approved quality including dismantling masonry wherever necessary and redoing the damaged portion to original condition etc. complete complying with standard specification and as directed by the departmental officers. |
| 315 | Providing and Fixing of FRP Gratings of 600 x 300 mm size with M.S Flats of size 25 x 10mm for outer frames 25 x 6mm for inner braces and PVC pipe 150mm dia fixed with mild steel gratings including cost and conveyance of pipes and gratings and fixing them in position (at 5m interval) |
| 316 | Supplying and fixing of 300mm dia RCC hume pipe etc. complete complying with standard specification and as directed by the departmental officers. |
| 317 | Clearing the Heavy Jungle |
| 318 | Supply and fixing of 750 G.S.M. Tensile Canopy with complete fixtures. Application of 1 coat of MRF Epoxy SPEP - primer grey followed by two coats of MRF spectra polyurethane enamel top coat matching of IS-800. With necessary G.I. high tensile P.V.C. coated rope, M.S. powder coated cleat will be used as fixtures as per the standard specification and as directed by the Departmental Officers. |
| 319 | Providing rain water harvesting pit of 1.50m depth with necessary earth work excavation,erecting the five nos of Rcc collar,sand filling of 0.60m depth,filling of 40mm HBS Jelly of 0.60m depth and covering with Rcc cover slab of 50mm thick and also connecting 110mm dia PVC pipe of 10.00m legth including transporting charges, fixing, etc. complete. |
| 320 | Supply, Installing, Testing and commissioning of barscreen MOC: MSEP,20 mm spacing. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers. |
| 321 | Supply, Installing, Testing and commissioning of oil skimmerType:SingleBelt,Capacity:10LPH,MOC:MSEP,bel type The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and asdirected by the departmental officers. |
| 322 | Supply, Installing, Testing and commissioning Rawsewage Transfer Pump centrifugal type. The pumpsshall be coupled to the adequate HP, electric motor, discharge butterfly valves, non return valves, PressureGauges as per technical specification. The pumps shall be 2 Nos (1 No working + 1 No standby)Duty:Totransfersewagetoaerationtank, Type:Horizontal,Centrifugal NonClog Flow:1.25m3/hr,Head:15mwc,MOC:CI,Motor:SuitableHP,Solidshandling:20to30mm The rateinclusive of cost of all materials, transportation asapplicable and supply to worksite etc., complete and asdirected by the departmental officers. |
| 323 | Supply, Installing, Testing and commissioning CoarsePoreDiffuser of suitable size of UPVC pipe grid with necessaryorifices UPVC pipe of 6.0 KG/cm2 pressure rating withremovable deflector to provide clog free air forEqualization tank MOC: MS/UPVC. The rate inclusive ofcost of all materials, transportation as applicable andsupply to worksite etc., complete and as directed by the departmental officers. |
| 324 | Supply, Installing, Testing and commissioning oftwinlobedesign type air blower complete with motors of capacity45 m3/hr @ 4 mtr head (1 No Working + 1 No Standby),cast iron material, discharge valves, including pressuregauge, interconnection piping, discharge silencer, antivibrationpads,Pressuregaugesetc.Therateinclusive ofcost of all materials, transportation as applicable andsupply to worksite etc., complete and as directed by thedepartmental officers. |
| 325 | Supply, Installing, Testing and commissioning fine bubblediffuser of suitable size for aeration tank. The rateinclusive of cost of all materials, transportation asapplicable and supply to worksite etc., complete and asdirected by the departmental officers. |
| 326 | Supply, Installing, Testing and commissioning MBBRMedia. The rate inclusive of cost of all materials,transportation as applicable and supply to worksite etc.,complete and as directed by the departmental officers. |
| 327 | Supply, Installing, Testing and commissioning ofsecondary settler PVC tube sheet. The rate inclusive ofcost of all materials, transportation as applicable andsupply to worksite etc., complete and as directed by thedepartmental officers. |
| 328 | Supply, Installing, Testing and commissioning SludgeRecirculation/Return Sludge Transfer Pumps. The pumpsshall be coupled to the adequate HP, electric motor,discharge butterfly valves, non return valves as pertechnical specification (1 No working + 1 No stand by)Duty:To transfer sludge to sludgedrying bedsType:Horizontal,CentrifugalNonClogFlow:1m3/hr,Head:15m, MOC:CI,Motor:SuitableHP, Solidshandling:20to30mm. The rate inclusive of cost ofmaterials, transportation as applicable and supply toworksite etc., complete and as directed by thedepartmental officers. |
| 329 | Supply, Installing, Testing and commissioning of SodiumHypo Chlorite Dosing System. The rate inclusive of costof materials, transportation as applicable and supply toworksite etc., complete and as directed by thedepartmental officers |
| 330 | Supply, Installing, Testing and commissioning filter feedpumps. The pumps shall be coupled to the adequate HP,electric motor, discharge butterfly valves, non returnvalves, pressure gauges as per technical specification (1No working + 1 No stand by)Duty:To transfer water to filters, Type:Horizontal,Monoblock,Flow:1.25m3/hr, Head: 30mwc, MOC: CI, Motor: Suitable HP The rate inclusive ofcost of materials, transportation as applicable and supplyto worksite etc., complete and as directed by the departmental officers. |
| 331 | Supply, Installing, Testing and commissioning of Pressure sandfilter16\\"diax65\\"HOS,FRPmaterial,frontalpiping,Multiport valves, pressure guage, gasket, flanges. Therate inclusive of cost of all materials, transportation asapplicable and supply to worksite etc., complete and asdirected by the departmental officers |
| 332 | Supply, Installing, Testing and commissioning ofActivated carbon filter 16\\" dia x 65\\" HOS, FRP material,frontal piping, multiport valves, pressure guage, gasket,flanges. The rate inclusive of cost of all materials,transportation as applicable and supply to worksite etc.,complete and as directed by the departmental officers. |
| 333 | Supply, Installing, Testing and commissioning TreatedWater Transfer pumps.The pump shall be coupled to theadequate HP, electric motor, discharge butterfly valves,non return valves, Pressure gauges as per technicalspecification(1Noworking+1Nostandby)Duty:TotransferwaterfromTreatedWaterTankType:Horizontal,Monoblock,Flow:1.25m3/hr,Head:30mwc,MOC:CI,Motor:SuitableHPThe rate inclusiveof cost of inclusive of cost of all materials, transportationas applicable and supply to worksite etc.,, complete andas directed by the departmental officers. |
| 334 | Supply, Installing, Testing and commissioning of Interconnected piping UPVC sch 80 for water line for rawsewage line, sludge line, filter water line, treated waterline and MS C class for air line for Equalization tank andaeration tank.The rate inclusive of cost of all materials,transportation as applicable and supply to worksite etc.,complete and as directed by the departmental officers. |
| 335 | Supply, Installing,Testing and commissioning of LT panelrequired contactr, OLR, START/STOP/TRIP switch, MCB,armoured or flexible cabling, PVC cable conduit pipe andits supports. The rate inclusive of cost of all materials,transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers. |
| 336 | Supply,Installation,Testingand Commissioning of ElectroMagnetic Flow Meter. The rate inclusive of cost of allmaterials, transportation as applicable and supply toworksite etc., complete and as directed by thedepartmental officers. |
| 337 | Supply, Installing, Testing and commissioning of MSFRPtank for aeration tank along with nozzles, drain flange,partition plates, handrails and platforms. The rateinclusive of cost of all materials, transportation asapplicable and supply to worksite etc.,, complete and asdirected by the departmental officers. |
| 338 | Supply, Installing, Testing and commissioning of MSFRPtank for Settling tank, along with nozzles, drain flange,partition plates, handrails and platforms. The rateinclusive of cost of all materials, transportation asapplicable and supply to worksite etc., complete and asdirected by the departmental officers. |
| 339 | Supply, Installing, Testing and commissioning of MSFRPtank for FilterFeed tank, along with nozzles, drain flange,partition plates, handrails and platforms. The rateinclusive of cost of all materials, transportation asapplicable and supply to worksite etc., complete and asdirected by the departmental officers. |
| 340 | Supply, Installing, Testing and commissioning of MSFRPtank for treated water tank along with nozzles, drainflange, partition plates ,handrails and platforms.The rateinclusive of cost of all materials, transportation asapplicable and supply to work site etc., completeand as Directed by the departmental officers. |
| 341 | Supply of Commissioning Chemicals. The rate inclusive of cost of all materials, transportation as applicable andsupply to work site etc.,complete and as directed by theDepartmental officers |
| 342 | Supply erection testing and commissioning of Electric Motor Driven Fire Pumpset suitable for automatic operation and consisting of following:a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 4550 LPM against a total head of 110 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 1 No. squirrel cage induction motor of 175 HP, 415 Volt, 3 phase 50Hz rating, conforming to IS:325-1978 with class F insulation, totally enclosed, IP 55 for enclosure fan cooled type conforming to relevant protection clause of IS 4691, synchronous speed of 2900 RPM. c. Common bed plate fabricated with MS channel / cast iron type for assembling the pump and motor flexible coupling between the pump and the motor with coupling guard for protection - 1 No. d. Making cement concrete foundation suitable for the above pumpset including vibration isolation pads as necessary, foundation bolts, brackets, clamp fixtures,grouting, etc., in accordance with the manufacturer's design and as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard Specification and as directed by the Departmental Officers |
| 343 | Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings and complete in all respects as required. a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 4550 LPM against a total head of 110 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel b. 190 BHP, 1500 RPM water cooled with radiator,diesel engine conforming to relevant BS & IS standard complete c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches, etc. d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc........... e. Exhaust system having flexible metallic mufler,100mm dia MS heavy pipe extended upto 1m outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition. f. Dash board consisting the instruments like Temperature Gauge, Galvano Type DC Ammeter, Lubricant Oil Pressure Gauge, Ignition Switch, Emergency Stop and all other protection equipment as per specification, stop soleneid for auto stop in the event of fault with audio indications, painted with Post Office Red Colour, etc., as required. g. 12V / 24V, storage battery, maintenance free tape, 180AH rating, MS fabricated common base plate, coupling guard, foundation bolts, etc., as required h. Postioning the diesel engine driven fire pump over cement concrete foundation using suitable size antivibration mounting arrangement. All works including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIRLOSKAR / EQUIVALENT. |
| 344 | Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent) |
| 345 | Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. |
| 346 | 3 core 185 sq.mm. armoured aluminium cable |
| 347 | 3 core 10 sq.mm. armoured aluminium cable |
| 348 | 2 core 1.5 sq.mm armoured multi strand aluminium |
| 349 | 10 core 2.5 sq.mm. armoured aluminium cable |
| 350 | Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers. |
| 351 | Supply, erection, testing and commissioning of following MS „C‟ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table „E‟, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT. |
| 352 | 200mm nominal dia |
| 353 | 150mm nominal dia |
| 354 | 100mm nominal dia |
| 355 | 80mm nominal dia |
| 356 | 65mm nominal dia |
| 357 | 50mm nominal dia |
| 358 | 40mm nominal dia |
| 359 | 25mm nominal dia |
| 360 | Wrapping and Coating Anti-Corrosive Treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specification as directed by the Departmental Officers 200mm |
| 361 | Wrapping and Coating Anti-Corrosive Treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specification as directed by the Departmental Officers 150mm |
| 362 | Wrapping and Coating Anti-Corrosive Treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specification as directed by the Departmental Officers 80mm |
| 363 | Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table „E‟, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT |
| 364 | 200 NB |
| 365 | 150 NB |
| 366 | 100 NB |
| 367 | 80 NB |
| 368 | Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table „E‟, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. |
| 369 | Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Nonreturn valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table „E‟, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers |
| 370 | 150 NB |
| 371 | 100 NB |
| 372 | Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table „E‟, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT |
| 373 | 150 mm dia |
| 374 | 100 mm dia |
| 375 | Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT. |
| 376 | Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT |
| 377 | Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification. |
| 378 | Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT |
| 379 | Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers. |
| 380 | Supply and fixing in position of 12 Volt 180 AH Lead Acid, Sealed Maintenance Free (SMF) batteries with connecting leads, lugs terminal post, etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT. |
| 381 | Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 382 | Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 383 | Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT |
| 384 | Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 385 | Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT |
| 386 | Supply and fixing in position of Fire Fighting Duct Window having proper glass window type double door with universe open key, painted inside white and outsid post office red for the sizes of 1300 x 900 x 500mm (L x B x D) fabricated using 25 x 3mm MS 'L' Angle and all sides covered with 2mm thick MS sheets, suitable arrangements to kept 2 Nos. of Fire Fighting Hoses and 1 No. Branch Pipe, mounted in fire duct using anchor fasteners, etc., as per standard specifications and as per directed by the Departmental Officers. |
| 387 | Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT |
| 388 | Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT |
| 389 | Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent) |
| 390 | Supply, errection, testing and commissioning of Fire Fighting Electrical Control Panel of 15 HP, 415 V, 50 Hz Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R, Y, B Phase Indication Lamp, Volt Meter (0 - 500 V), Ammeter (0 - 50 A), Volt Meter Selector Switch- 1 set c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set d. Single Phase Preventer - 1 No. e. Indication Lamp for Motor ON / OFF / TRIP - 1 set f. AUTO / MANUAL Selector Switch, ON / OFF Push Button - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover The above panel mounted on wall using anchor fasteners bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard methods and as directed by the Departmental Officers. |
| 391 | Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers. |
| 392 | Supply and laying of 2 core 1.5 sq.mm. armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers |
| 393 | Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 394 | Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1000mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved. |
| 395 | Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area. The Rosette shall be fabricated by MS plate of 2mm thick and the finish shall be powder coated and colour, as directed by the Departmental Officers. |
| 396 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 397 | Supply & Installation of Gun Metal Ball Valve of size 25mm dia size including necessary Fittings |
| 398 | MS Angle / Channel for Supporting Pipes inside the Pump room with Cutting, welding,Painting including accessories like U bolt , Anchor Fastners etc., |
| 399 | Supply & Installation of in position the sign board of \\"EXIT \\" with arraow to be placed at walking pathways by fixing on walls to direct occupants to outside the buliding in an emergency. The Exit sign board will be autoglow photoluminiscent type which will glow at dark.(Single Side indication) |
| 400 | Supply & Installation of Fire Escape Route Plan Laminated Board Auto Glow Print to be placed at each floor by fixing on walls to direct occupants to outside the buliding in an emergency. The Fire Escape Route Plan will be autoglow photoluminiscent type which will glow at dark.(Single Side indication) |
| 401 | Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings.A. Common Panel in Fire Pump House(i). Incomera. 1 No. 600A TP & N SDFU with HRC fusesb. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supplyc. 1 No. (0-500A) digital ammeter with selector switch & CTsd. 1 No. (0-500V) digital voltmeter with selector switch and control fusese. 3 Nos. phase indication lamp LED type with toggle switches with control fuses(ii). Outgoinga. Main Fire Pump400 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual /OFF operation - 1 No........... |
| 402 | b. Jockey Pump125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No.c. Diesel Engine Control comprising of:1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode.2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication.3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter. 4. All standard relays and accessories for automatic operation of diesel engine.5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 403 | Supplying and Fixing the Reverse osmosis plant 1000 liters/hr PWDspecifications:Supplying and Erecting in position of following liters capacity Industrial ModelReverse osmosis Water – cum - purifier to deliver Potable Water with WorldHealth Organization (WHO) Standards with following accessories.(a) MS Skid – 1 No(b) Media 11054 No. Vessel with 20 NB Multiport Valve (with media Pebbleand Fine Sand and Activated Carbon Filling) Set.(c) Feed Pump 0.50 HP – 1 No(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No(e) Membrane 40 x 40 Filmtech ( or) equivalents / Osmonic (USA) - 1 Noand Membrane Pressure Vessel 40 x 40 – 1 No & Pressure Gauge – 2 Nos(f) Flow Meter – 1 No , 20 “Filter with Housing – 1No, Low Pressure switch– 1 No, Level Switch – 1 No & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessaryStainless Valves and Fittings and Float control etc., The rate should beinclusive of all Civil works, wherever necessary to install the system in positionand intact |
| 404 | Supply and Fixing of Automatic Multiport Valve for backwash and rinse Application for Dual Media Filter for the removal sediments and organic impurities present in the water including cost of materials, Handling charges that include loading and unloading charges, transportation to site and labour charges for fixing in position with necessary accessories and finishing neatly as directed by the departmental officers.. |
| 405 | Supplying and Fixing of Auto Flushing applications for effective maintenance of membrane and auto cut off arrangements including cost of materials, Handling charges that include loading and unloading charges, transportation to site and labour charges for fixing in position with necessary accessories and finishing neatly as directed by the departmental officers. |
| 406 | Supplying and Fixing of Water Dispenser with Prefilter (5micron -10Inch) (StorageCapacity(L):80,StorageCapacityCold:65,StoragecapacityAmbient:15,StorageCapacityHot:2,Dimension(WxDxH)mm:660x575x1575,Make :Bluestar TotalrunningCurrent(A):7.5,TotalPower(W):1575,ThermalInsulationpertank:PUF,No.ofFaucets(Cold/Hot/Plain):1/1/1,OuterBodyMaterial:PrePaintedSheet,Refrigerant:R134aType of installation :Indoor, Top Lid Type :Hingedas,Prefilter-1No as directed by departmental officers (Make : Bluestar or equivalent) |
| 407 | Supplying and Fixing of MS Stand for Water Dispenser as directed by departmental officers |
| 408 | Supply and fixing of Electrical work using 4Sq.mm wire 15 Amps-1No for RO Plant & 15Amps Switch with Socket -3Nos for Cooler Connections as directed by departmental officers |
| 409 | Supply and fixing of 1000litre storage tank as directed by the department officer |
| 410 | Supply and Fixing of Shed Work of size 15*10*10 as directed by departmental officers |
| 411 | Providing, supplying and fixing a Dining Table of size 6’x2’-6\\" with 18mm granite top with half round nosing edges with 16 gauge SS pipe leg, floor adjustments bushes at the bottom . The rate includes labour for manufacturing supply,transportation, etc., complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 412 | Providing, supplying and fixing a Dining Chair PVC fixed mould seat and back with handle and bottom with 1\\" SS leg with floor adjustment nylon bushes.The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 413 | Providing, supplying and fixing a Steel Cot With Mattress 75\\"x36\\" made with 18 gauge 1\\" round CR tube for head rest and leg rest frame.The bed area is made up of 1mm thick (18gauge)CRCA Sheet which is profile folded at all the edges.2 Nos of extra length wise stiffener made up of 1mm thick (18 gauge)CRCA sheet is added beneaththe area for extra strength and staility.All metal surfaces are finished with 60 microns powder coating.Mattress made out of 4 inch thickness with pillow) etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 414 | Providing, supplying and fixing a Study Table 3 X 2 made with 18 gauge 1\\"x1\\" square CR tube for leg frame and top support frame.The top of the frame is fixed with 18 mm thick both side prelaminated wood particle board (ISI&ISO Certified)and beneath the top is provide with a drawer made up of 18mm thick both side laminated woodpartcle board (ISI&ISo certified ) for the horizontal planks ,12mm&8mm thick prelaminated wood particle Board(ISI &ISO Certified ) for the drawer side and bottom panel.The drawer has been provided with arrangements for the pad locking .All cutting edges are finished with premium pvc edge banding.All metal surfaces are finished with 60 microns poeder coating.The frame is fixed with superior PVC bush etc., complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 415 | Providing, supplying and fixing a Study Chair Supply and fixing for steel frames powder coated perforated study chair with arm rest 16 gauge crca 1 \\" round tubes frame for the chair and 18 gauge crca perforated sheets for seat and back.70 micron thickness poeder coated after seven tank cleaning process.The rate excluding of all taxes and includes cost of all materials, labour,and other incidental charges, including providing in the position to the rooms etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 416 | Providing, supplying and fixing a Bed Side Box made out of 18mm thick Commercial Plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. The rate includes the cost ofmaterial, labour for manufacturing, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 417 | Providing, supplying and fixing a Table 2400L X 450D X 750H Tops and legs made out of 25mm and modesty made out of 18mm thick Commercial Plywood, both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. The rate includes the cost of material, labour for manufacturing,etc.complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 418 | Providing, supplying and fixing a Chair with arm steel frame and leg chair with cushion, 3'' 18 gauge CR round pipe legs, seat and back high density molded cushion, upholstery fire proof cloth, arms are PU soft pad, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 419 | Providing, supplying and fixing a Chair Seat and back cushion with chromeplated pipe leg with floor adjustment bushes at the bottom. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 420 | Providing, supplying and fixing a Table 1800L X 450D X 750H Tops and legs made out of 25mm and modesty made out of 18mm thick Commercial Plywood, both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. The rate includes the cost of material, labour for manufacturing, etc.complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 421 | Providing, supplying and fixing queen-size bed made of seasoned hardwood / good-quality commercial plywood with sturdy internal framework, overall size approximately 1980 mm × 1525 mm, with suitable bed platform, headboard and side rails, finished with decorative laminate / approved polish, including necessary supporting legs, screws, bolts, fittings and accessories, including all materials, labour, transportation and incidental charges etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 422 | Providing, supplying and fixing a Table 3600L X 450D X 750H Tops and legs made out of 25mm and modesty made out of 18mm thick Commercial Plywood, both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. The rate includes the cost of material, labour for manufacturing, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 423 | Providing, supplying and fixing a wooden podium / lectern made out of good-quality commercial plywood of 18 mm thickness with sturdy internal wooden framework, suitable sloping top reading platform with raised book-rest, front decorative panel and side supports, finished with approved decorative laminate on all exposed surfaces, including provision for microphone fitting, cable entry hole, necessary hardware, screws, edge banding and accessories, complete as per approved design and dimensions, including materials, labour, transportation and all incidental charges etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 424 | Providing, supplying and fixing a premium-quality circular conference table of 1200 mm diameter and 750 mm height, fabricated using 25 mm thick BWR-grade commercial plywood / high-density engineered board with sturdy internal framework, finished with 1 mm thick premium-grade decorative laminate on top and all exposed surfaces, with matching edge banding, supported on a heavy-duty MS fabricated pedestal structure with premium powder-coated finish / approved wooden cladding, including concealed cable management provision, flush-fitted cable box, microphone cable entry holes, necessary hardware, fasteners and accessories, including materials, labour, transportation and all incidental charges etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 425 | Providing, supplying and fixing a premium-quality executive revolving chair with ergonomically designed high-back cushioned backrest and seat, made with high-density PU foam padding, upholstered with approved quality leatherette / premium fabric, having a sturdy metal inner frame, adjustable headrest, padded armrests, pneumatic gas-lift height adjustment mechanism, 360-degree swivel mechanism, multi-lock reclining mechanism with tilt tension control, heavy-duty five-star nylon / chrome-plated metal base fitted with smooth-running twin-wheel castors, including all necessary fittings and accessories including materials, labour, transportation and all incidental charges.complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 426 | Providing, supplying and fixing a Table L2400 x D1050 x H750mm 25mm thk.Table Top E/B L2400mm X D1050mm - 1Nos 25mm thk. Vertical Leg E/B 1050mm X 750mm - 2Nos 18mm thk. Modesty 2400mm X 750mm - 1Nos Side Storage unit Size : L1200 x D450 x H750 mm Mobile Pedestal. Table Tops and legs made out of 25mm and modesty 18mm thick Commercial plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. Mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm thick Commercial plywood with laminate finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation, etc. |
| 427 | Providing, supplying and fixing a Chair Back : 3/4' round pipe frame covered with 40 Density cushion with selected Upholstery, Seat: 3/4' round pipe with spring and 2\\" PU Molded Foam with and selected Upholstery covered synchrony Tilting Facility, Hydraulic gas Lift, Stainless steel Base, PU arms Nylon caster Wheels. The rate includes cost of all materials, fabrication, transports and other incidental charges, includingproviding in the position etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 428 | Providing, supplying and fixing a Visitor Chair Seat and back nylon netted mesh with chromeplated pipe leg with floor adjustment bushes at the bottom. The rate includes labour for manufacturing, supply, transportation, etc.complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 429 | Providing, supplying and fixing a Table L2100 x D1050 x H750mm 25mm thk.Table Top E/B L2100mm XD1050mm - 1Nos 25mm thk. Vertical Leg E/B 1050mm X 750mm - 2Nos 18mm thk. Modesty 2100mm X 750mm - 1Nos Side Storage unit Size : L1200 x D450 x H750 mm Mobile Pedestal. Table Tops andlegs made out of 25mm and modesty 18mm thick Commercial plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. Mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm thick Commercial plywood with laminate finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 430 | Providing, supplying and fixing a Chair with back in Moulded frame covered with breathable Mesh with HEAD REST in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank chrome base with castor wheel finishing chairs. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 431 | Providing, supplying and fixing a Visitor Chair with back in frame covered with breathable Mesh in black for back, with arm steel frame and leg chair 14 gauge CR round pipe legs, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, fixed arms, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 432 | Providing, supplying and fixing a Sofa Set 3 + 1 + 1 Providing sofa of with basic Silver Wood framework. The seat have flat type High Density cushions placed on the seat, back rest with fireproof cloth or leatherride. Bottom Legs with Floor Adjustable bush model sofa. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 433 | Providing, supplying and fixing a Teapoy of Size 3X1½ Teakwood with Melamine polish. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 434 | Providing, supplying and fixing a Table L1500 x D750 x H750mm 25mm thk.Table Top E/B L1500mm X D750mm - 1Nos 25mm thk. Vertical Leg E/B 750mm X 750mm - 2Nos18mm thk. Modesty 1500mm X 750mm - 1Nos Mobile Pedestal. Table Tops and legs made out of 25mm and modesty 18mm thick Commercial Plywood, all exposed edges are Machine pressed Edgebanding finish. 3 Draw mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm Commercial Plywood finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation,etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 435 | Providing, supplying and fixing a Chair with back in Moulded frame covered with breathable Mesh in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank chrome base with castor wheel finishing chairs. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 436 | Providing, supplying and fixing a Visitor Chair with back in frame covered with breathable Mesh in black for back, with arm steel frame and leg chair 14 gauge CR round pipe legs, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, fixed arms, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 437 | Providing, supplying and fixing a Table L2400 x D1050 x H750mm 25mm thk.Table Top E/B L2400mm X D1050mm - 1Nos 25mm thk. Vertical Leg E/B 1050mm X 750mm - 2Nos 18mm thk. Modesty 2400mm X 750mm - 1Nos Side Storage unit Size : L1200 x D450 x H750 mm Mobile Pedestal. Table Tops and legs made out of 25mm and modesty 18mm thick Commercial plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. Mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm thick Commercial plywood with laminate finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 438 | Providing, supplying and fixing a Chair Back : 3/4' round pipe frame covered with 40 Density cushion with selected Upholstery, Seat: 3/4' round pipe with spring and 2\\" PU Molded Foam with and selected Upholstery covered synchrony Tilting Facility, Hydraulic gas Lift, Stainless steel Base, PU arms Nylon caster Wheels. The rate includes cost of all materials, fabrication, transports and other incidental charges, includingproviding in the position etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 439 | Providing, supplying and fixing a Visitor Chair Seat and back nylon netted mesh with chromeplated pipe leg with floor adjustment bushes at the bottom. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 440 | Providing, supplying and fixing a Table L2100 x D1050 x H750mm 25mm thk.Table Top E/B L2100mm X D1050mm - 1Nos 25mm thk. Vertical Leg E/B 1050mm X 750mm - 2Nos 18mm thk. Modesty 2100mm X 750mm - 1Nos Side Storage unit Size : L1200 x D450 x H750 mm Mobile Pedestal. Table Tops and legs made out of 25mm and modesty 18mm thick Commercial plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. Mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm thick Commercial plywood with laminate finished with 2mmthick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 441 | Providing, supplying and fixing a Chair with back in Moulded frame covered with breathable Mesh with HEAD REST in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank chrome base with castor wheel finishing chairs. The rate includes labour for manufacturing, supply,transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 442 | Providing, supplying and fixing a Visitor Chair with back in frame covered with breathable Mesh in black for back, with arm steel frame and leg chair 14 gauge CR round pipe legs, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, fixed arms, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 443 | Providing, supplying and fixing a Sofa Set 3 + 1 + 1 Providing sofa of with basic Silver Wood framework. The seat have flat type High Density cushions placed on the seat, back rest with fireproof cloth or leatherride. Bottom Legs with Floor Adjustable bush model sofa. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 444 | Providing, supplying and fixing a Teapoy of Size 3X1½ Teakwood with Melamine polish. The rate includes labour for manufacturing, supply,transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 445 | Providing, supplying and fixing a Table L1500 x D750 x H750mm 25mm thk.Table Top E/B L1500mm X D750mm - 1Nos25mm thk. Vertical Leg E/B 750mm X 750mm - 2Nos18mm thk. Modesty 1500mm X 750mm - 1Nos Mobile Pedestal. Table Tops and legs made out of 25mm and modesty 18mm thick Commercial Plywood, all exposed edges are Machine pressed Edgebanding finish. 3 Draw mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm Commercial Plywood finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation,etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 446 | Providing, supplying and fixing a Chair with back in Moulded frame covered with breathable Mesh in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank chrome base with castor wheel finishing chairs. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 447 | Providing, supplying and fixing a Visitor Chair with back in frame covered with breathable Mesh in black for back, with arm steel frame and leg chair 14 gauge CR round pipe legs, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, fixed arms, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 448 | Providing, supplying and fixing a Table L1200 x D600 x H750mm25mm thk.Table Top E/B L1200mm X D600mm - 1Nos25mm thk. Ve rtical Leg E/B 600mm X 750mm - 2Nos 18mm thk. Modesty 1200mm X 750mm - 1NosMobile Pedestal. Table Tops and legs made out of 25mm and modesty 18mm thick Commercial Plywood, all exposed edges are Machine pressed Edgebanding finish. 3 Draw mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm Commercial Plywood finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation,etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 449 | Providing, supplying and fixing a Chair with back in Moulded frame covered with breathable Mesh in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank chrome base with castor wheel finishing chairs. The rate includes labour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 450 | Providing, supplying and fixing a Reception Table Size : 9 x 9 tops and legs made out of 25mm and 18mm thick Commercial Plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. As Per Sample Approved Model.The rate includes labour for manufacturing, supply, transportation, etc complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 451 | Providing, supplying and fixing a Reception Chair with back in Moulded frame covered with breathable Mesh in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank chrome base with castor wheel finishing chairs. The rate includeslabour for manufacturing, supply, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 452 | Providing, supplying and fixing a Three Seater Waiting Chair Seat and Back Processed with1.0mm thickness cold rolled furnished with powder coating, Armrest Processed with 1.2mm MS tube and furnished with powder coating, Leg Processed with 1.2mm thickness MS Sheet furnished with powder coating. The rate includes labour for manufacturing, supply, fixing, transportation, etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 453 | Providing, supplying and fixing a Slotted Angle Rack of size 6.5' H x 3'L x 12\\" D with 14 gauge leg, 18 gauge sheet bold and nut fitting rack. The rate includes labour for manufacturing, supply, transportation,etc.,complete complying with standard specification and as directed by the departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 454 | Supply of Refridgerator of 255 Litre Capacity . The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. (The Sample should be got approved by the Executive Engineer before execution of works). |
| 455 | Supplying and fixing Steam Generator with Outer MS Double jacketed vessel inner SS Vessel complete with accessories such as pressure guage, weight, Safety valve, water level indicator, etc., to accommodate in the bottom of the boiler. Outer double jacketed fabricated out of 5/6 mm MS Sheet. Inner fabricated out of 16 swg thick, Inner tank bottom plate thick - 2mm Dead weight - 1 to 1.5 Kg capacity. Water capacity - 250 Lts. etc complete.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 456 | Supplying and fixing Rice Cooker of Capacity 150 Ltrs, Single Jacketed (Food Grade) operated by steam. The unit is cylinderically type vessel fabricated with not less than 2mm ss sheet. It is provided with perforated ss plate at the inner bottom, pressed type SS lid handle, steam injection terminal, drain nipple and tilting handle for tilting vessel. The unit is mounted on SS Stand. The unit shall be provided steam inlet valve (ss) etc . The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 457 | Supplying and fixing Vegetable/ Dhall cooker of Capacity-150 Lts - Double Jacketted operated by steam. The unit has to be cylinderical type vessel fabricated with not less than 2mm SS Sheet. It has to be provided with perforated ss plate at the inner bottom, pressed type SS lid handle, steam injection terminal, drain nipple and tilting handle for tilting vessel. The unit has to be mounted on SS Stand. The unit shall be provided steam inlet valve (ss) etc . The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 458 | Supplying and fixing Idly Box of Capacity - 240 Idlies per charges of 6 to 7 minutes approximately. The unit has to be fabricated with 16 & 18 SWG SS Sheet. The perforated idly trays has to be made of 18 SWG SS Sheet and shutter trays to be made with 20/22 SWG SS Sheet. The unit has to be mounted on SS Stand. The unit shall be provided with steam inlet Valve (SS). The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 459 | Supplying and fixing Two Burner Range Size of 48\\"x24\\"x24\\" made out of top four side, 18 SWG four side 20 SWG SS Coverings legs 11/2\\"x11/2\\", with top fitted with casting pan support supply of united Gas burner, Heavy NC Valves heavy copper pigtails with waste collecting tray etc.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 460 | Supplying and fixing Single burner of size 24\\"x24\\"x18\\" made out of top, 18 SWG 20 SWG 202 grad SS covering legs 11/2\\"x11/2\\", SS. Square polished 202 Grade. Pipe legs MS angle frame and SS legs fabricated with 11/2\\"x11/2\\", with top fitted with casting pan support supply of united Gas burner, Heavy NC Valves heavy copper pigtails with waste collecting Tray etc .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 461 | Supplying and fixing Dosa Plate of Size 48\\"x36\\"x34\\"+6\\" made out of 25mm thick M.S Plate on top with mounted M.S.Angle frame with 3 side SS Sheet 6\\" height. Splash back in top three side covering in 13\\" front side heat glass whole & Plywood in SS sheet covering supply of \\"V\\" type gas burner, NC Valve & Copper pigtails with adjustable nyllon etc.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 462 | Supplying and fixing Dosa Batter Stand with 1 US - 4 container of Size 24\\"x24\\"x34\\" top made out of 18 SWG SS sheet legs made out of 16SWG 11/2\\" OD ss pipe legs with adjustable nylon bullet bush etc. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 463 | Supplying and Fixing Work table with 2 US size 48\\"x24\\"x34\\" fabricated out of SS angle frame on top without marble and under shelf made out of 18mm SWG thick, leg made out of 16 SWG thick 11/2\\" square pipe with adjustable nylon bullet bush etc .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 464 | Supplying and fixing Three sink Size of 72\\"x24\\"x34\\"+6\\" made out of 304 grade 16 swg ss sheet 03 sink bowls with 6\\" splash back made out of 16 SWG 11/2\\" OD SS pipe legs with adjustable nylon bush etc The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 465 | Supplying and fixing Plate Rack with 5 Shelves OAS : 48\\"x18\\"x72\\" fabricated out of 16 SWG SS sheet made out if 18 SWG 11/2\\" OD SS Pipe legs with adjustable nulon bullet bush etc The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 466 | Supplying and fixing Storage rack of 5 layer 5'x11/2'x6' height rack stainless steel sheet 16 guage supporting 11/2x11/2 inch pipe etc complete .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 467 | Supply and fixing of Vegetable cutting machine .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 468 | Supply of Vegetable cutting blade including .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 469 | Supply of SS Plate with required size .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 470 | Supply of SS Water Tumbler with required size .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 471 | Supply of SS Water Mug with required size including .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 472 | Supply of SS Tea Tumbler with required size .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 473 | Supply of Sambar Bucket with required size .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 474 | Supply of Sambar Basin with required size .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 475 | Supply of Hot Box 30 Litre Capacity .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 476 | Supply of Tea Can of 10 Litre capacity. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 477 | Supply of Mixer Grinder .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 478 | Supply of Annakoodai including. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 479 | Supply of SS Water Pot The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.. |
| 480 | Supply of Plastic Water Pot .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 481 | Supplying and Fixing of Chapathy kneading machin With nessarray Arangementa ect..Complte,Excluding GST and as .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 482 | Supplying and fixing LP Gas line including Materials,Threading,Clamping and painting.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.. |
| 483 | Supplying grinder 3 litres including Materials,Threading,Clamping and painting.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.. |
| 484 | Supplying grinder 5 litres including Materials,Threading,Clamping and painting.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.. |
| 485 | Supplying Bain Marie Hot Food Cabinet, 5 Pans including Materials,Threading,Clamping and painting.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.. |
| 486 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLSH copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories except ceiling rose and round sheet with flexible hose 0.25 meter, Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (4 points/Coil). (Higher End)(SD-286) |
| 487 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) (SD - 289) |
| 488 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (SD - 293) |
| 489 | Supply and fixing of 4’20W LED Tube Light for Fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.( Make: Phillips/ Havells or equivalent)(DATA- 1) |
| 490 | Supply and fixing of 1 x 1 square type 24W LED Recess / Surface fitting on wall with complete electrical connection. (Philips/ Havells/ Eq). (DATA- 2) |
| 491 | Supply and fixing of 40W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (DATA - 3) |
| 492 | Supply and fixing of FIxed Spot Light ( Havells Make: UNECO FIXED DOWN LIGHT-.30W) Recessed type Fitting on false ceiling with PVC unsheathed Copper leads from terminals to the fitting.(DATA- 4) |
| 493 | Supply and fixing of recess type round LED 15W (EDGE G2 ROUND RECESSED Havells make) on the false ceiling with connected leads from terminals to the fitting.(DATA- 5) |
| 494 | Supply and fixing of 3 mod skirting light with complete electrical connection. (Legrand Make Myrius model) (DATA -6) |
| 495 | Supply and fixing of Bakelite battern holder with 15 W LED Bulb (Philips make) for BH point. (DATA-7) |
| 496 | Supply and fixing of fancy glass shade and 7W / 9W LED bulb ( SD 79) |
| 497 | Supply and fixing of high bay fittings 100 W on the ceiling with complete electrical connection. (DATA - 8) |
| 498 | supply and fixing of 80W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.(DATA-09) |
| 499 | Supply & Fixing of Mirror Light 20W LED Batten on wall.(DATA-10) |
| 500 | supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18\\") (SD - 475) |
| 501 | Supply & Fixing of 450mm wall mounting air circulator fan on the wall. (DATA-11) |
| 502 | Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete without provision of hole in the wall(SD-115) |
| 503 | Supply and fixing of 450mm (18\\") sweep (light duty) AC dxhaust fan complete without provision of hole in the wall(SD-119) |
| 504 | Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch. (SD - 105) |
| 505 | Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End. (SD-378) |
| 506 | Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD- 402) |
| 507 | Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.(6 Module) (SD-426) |
| 508 | Supply and fixing of 2nos.6A two module 3 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(SD-384) |
| 509 | Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.(SD-390) |
| 510 | Supply and fixing of 1 no. 16 A modular socket with module cover plate on suitable module concealed box and 1 no. 16 A switch with module cover plate (plastic)on suitable module concealed box (GI) in flush with wall with connections. (Legrand Make Myrius model switches, boxes and cover plates) (DATA-12) |
| 511 | Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) sd 143 |
| 512 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.(SD-535) |
| 513 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End(SD -525) |
| 514 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD -582)( For Lighting) |
| 515 | Supply and fixing of Three phase Seven Segment type 6 way 100A distribution board with Metal Door cover Code IP42 Protection , with 100A 4 pole MCB as incoming and Sub incomers 3 Nos 40A DP RCCB and 18 Nos 32A SPMCB as Outgoing on Wall with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/legrand) (Power & CS Plugs) (DATA–13) |
| 516 | Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB, 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD 596) (Stilt floor) |
| 517 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 4P MCB switch as incoming and 6 nos. 6A to 32A SP MCB and 2 no. 63 A 3P MCB as outgoing on wall with earth connection only. Higher End (DATA - 13)(for lift) |
| 518 | Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63A 4P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only. Higher End (Split type and castte AC Plugs) (SD-558) |
| 519 | 400A ATS PANEL :- Design, Supply, erection, testing and commissioning of 400A floor mounted cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB’s Incomer &outgoing units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4 Nos. of 2” X ¼ ” tinned copper bus bar for 3 phases and neutral (50mm x 6mm) and 2Nos. of earthing bus of size 1” X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar insulator(Epoxy insulator) with maximum cree page distance and supported on MS Base channel frame work of size 7'X 2'X ¼”–1SetIncoming1)Supply and fixing of 400A 4pole MCCB with spreader link and rotary handle -1No connected : 1. ATS 400A -1 NoOutgoing1)Supply and fixing of 400 3Pole MCCB with spreader link and rotary handle—2 Nos 2)Supply and fixing of 250A 3Pole MCCB with spreader link and rotary handle—02No |
| 520 | Inter connecting the all LT MCCB’s to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve colour coding of phases and neutral indication. Double Earth connection of the MCCB’s to earth bus colour coding of phases and neutral indication. Double Earth connection of the |
| 521 | MCCB’s to earth bus using suitable tinned copper flats by 2 runs of 1” X 1/8” Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with , 1 set of supply and fixing Electronic Multifunction Meter class 0.2S flush mounting L&T or equivalent make. Supply and fixing of danger board withSiemens grey powder coating with superScribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning(L&T, C&S, SIEMENS, ABB) (Main Power- 01 nos) (DATA-14) |
| 522 | Floor Wise panel :-Supply and fixing of 125A capacity dust and proof cubical panel board of size 6’ ft x 5’ ft x 2’ ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. Incomer 1) 125A 4pole Change over Switch-1No Outgoing 1) 63A TPN MCCB-6 Nos |
| 523 | A Separate chamber on Top of one side should be built with (0-500 V) Voltmeter (0-250A) Ammeter with C.T and selector switches with one set of LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases the bus will have 4 Nos of 1x1/4 bus for phase and neutral and 2 Nos. 1x1/8 earth bus all round the panel to provide double earth connection to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 250A switches should be connected to the bus with same size of 1 x 1/4 fixed copper flat and 125A switches should be connected to the bus by 1x1/8 fixed copper flat. The switch should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be powder coat painting Siemens grey complete with LED Digital Display for VAF Meter chamber. The cable size, capacity of switch and location should be marked with white paint .(L&T/Siemens) @ Lighting -04,lift 6 No-01 & Camp office Lighting -01 no)(DATA-15) |
| 524 | A Separate chamber on Top of one side should be built with (0-500 V) Voltmeter (0-250A) Ammeter with C.T and selector switches with one set of LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases the bus will have 4 Nos of 1x1/4 bus for phase and neutral and 2 Nos. 1x1/8 earth bus all round the panel to provide double earth connection to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 250A switches should be connected to the bus with same size of 1 x 1/4 fixed copper flat and 125A switches should be connected to the bus by 1x1/8 fixed copper flat. The switch should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be powder coat painting Siemens grey complete with LED Digital Display for VAF Meter chamber. The cable size, capacity of switch and location should be marked with white paint .(L&T/Siemens) @ Lighting -04,lift 6 No-01 & Camp office Lighting -01 no)(DATA-16) |
| 525 | A Separate chamber on Top of one side should be built with (0-500 V) Voltmeter (0-400A) Ammeter with C.T and selector switches with one set of LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases the bus will have 4 Nos of 2x1/4 bus for phase and neutral and 2 Nos. 1x1/8 earth bus all round the panel to provide double earth connection to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 400A switches should be connected to the bus with same size of 2 x 1/4 fixed copper flat, 125A switches should be connected to the bus by 1x1/4 fixed copper flat .The switch should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be powder coat painting Siemens grey complete with LED Digital Display for VAF Meter chamber. The cable size, capacity of switch and location should be marked with white paint .(L&T/Siemens) @ Grnd floor to 3th floor (Power Each floor-1No) (DATA-16) |
| 526 | Alternate floor AC panel: Supply and fixing of 250A capacity dust and proof cubical panel board of size 4.5’ ft x 5’ ft x 2’ ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. Incomer: 1) 250A 4pole MCCB Switch -1No Outgoing: 1) 125A TPN MCCB-7 Nos |
| 527 | A Separate chamber on Top of one side should be built with (0-500 V) Voltmeter (0-250A) Ammeter with C.T and selector switches with one set of LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases the bus will have 4 Nos of 1x1/4 bus for phase and neutral and 2 Nos. 1x1/8 earth bus all round the panel to provide double earth connection to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 250A switches should be connected to the bus with same size of 1 x 1/4 fixed copper flat, 125A switches should be connected to the bus by 1x1/8 fixed copper flat .The switch should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be powder coat painting Siemens grey complete with LED Digital Display for VAF Meter chamber. The cable size, capacity of switch and location should be marked with white paint . (Ac panel 5 nos and common panel 1 no)(L&T/Siemens) (DATA-17) |
| 528 | Supply and fixing of 250 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (SD-661) |
| 529 | Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.(SD-664) |
| 530 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD - 55) |
| 531 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. (Sd-348) |
| 532 | Supply and run of 2of4sq.mm.PVC insulated SC unsheathed FRLS copper conductor of1100Vgrade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour..(SD - 57) |
| 533 | Supply and run of 2of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 6sq.mm copper wire and making good of the concealed portion with suitable colour.(SD-59) |
| 534 | Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position (For UPS) (SD-350) |
| 535 | Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. (SD - 358) |
| 536 | Supply and run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6sq.mm copper wire and making good of the concealed portion with suitable colour.(From Power Panel Board from all floors to 6 Way 7 segment DB (for AC Plugs in all the floors ) )(DATA-18) |
| 537 | Supply and run of 4 of 25 sq.mm (168/0.45) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 10 sq.mm copper wire and making good of the concealed portion with suitable colour(DATA- 19) |
| 538 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-667) |
| 539 | Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(For Street Light post clamping on post for 2 mtr each post)(SD-204) |
| 540 | Supply and fixing of the 4x16 sqmm brass cable gland for the 4x16 sqmm PVC Armoured LTUG cable with earth connection. (DATA-20) |
| 541 | Supply and providing cable end termination of 4x16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (DATA-21) |
| 542 | Supply and clarnping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-206) |
| 543 | Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection. (SD-165) |
| 544 | Supply and providing cable end termination of 3-1/2x35sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(SD-224) |
| 545 | Supply and clarnping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 207) |
| 546 | Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection.(Sd-166) |
| 547 | Supplyandprovidingcableendterminationof3-/2x50sq.mm.PVC LTUG aluminium armouredcable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(SD-225) |
| 548 | Supply and clarnping of 3-1/2 x 95sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps(SD 209) |
| 549 | Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection.(SD-168) |
| 550 | Supplyandprovidingcableendterminationof3-1/2x95sq.mm.PVCLTUGaluminiumarmouredcablewithnecessaryaluminium cable sockets by crimping etc with electrical connection complete.(SD-227) |
| 551 | Supply and clarnping of 3-1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps((SD-210) |
| 552 | Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD 673) |
| 553 | Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection. (SD-169) |
| 554 | Supply and providing cable end termination of 3-1/2x120sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(SD-228) |
| 555 | Supply and Laying of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good)(SD-676) |
| 556 | Supply and clarnping of 3-1/2 x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS Clamps.((SD-213) |
| 557 | Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection(SD 172) |
| 558 | Supply and providing cable end termination of 3-1/2x120sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(DATA-22) |
| 559 | Supply and installation of GI cable tray from the wall / ceiling. The cable tray shall be fabricated in standard length of 2.5 meter of size 2 mm thick 600mm width x 50 mm height with suitable supporting arrangements shall be provided at equal intervals with suitable clamps from the wall / ceiling while erecting the cable tray. Jointing of cable trays shall be with fish plates to match the dimension of the cable tray. Fixing both for the jointing of the tray and fixing of the trays on the structure shall be with Thread Rod or approved type of corrosion resistant fixtures. (DATA - 23) |
| 560 | Supply and installation of GI cable tray from the wall / ceiling. The cable tray shall be fabricated in standard length of 2.5 meter of size2 mm thick 150mm width x 50 mm height with suitable supporting arrangements shall be provided at equal intervals with suitable clamps from the wall / ceiling while erecting the cable tray. Jointing of cable trays shall be with fish plates to match the dimension of the cable tray. Fixing both for the jointing of the tray and fixing of the trays on the structure shall be with Thread Rod or approved type of corrosion resistant fixtures. (DATA -24) |
| 561 | Supply and fixing of 40A FP MCB isolator in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand (MDS)/ Hager (L&T) make) (DATA-25) |
| 562 | Supply and fixing of 63A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand (MDS)/ Hager (L&T) make), (DATA-26) |
| 563 | Supply and fixing of 32A DP MCB in Metal box DP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand (MDS)/ Hager (L&T) make) (DATA-27) |
| 564 | Supply and fixing of 63A FP MCB with SMC box (Legrand make) open in flush with wall with painting with necessary connection. (DATA-28) |
| 565 | Supply and installation of 2 TR capacity 5 star rated energy efficient Hi-wall mounting split type Air-conditioning unit consisting of outdoor condensing unit complete with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc., and 1 number indoor unit comprising evaporator unit with cooling coil, blower motor and connected accessories, control etc., with copper refrigerant piping and cord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V +/- 10% 50 Hz single phase A.C. supply adhering following norms a) Nominal Cooling capacity -23300 BTU/Hrb) Air flow rate - 635 CFMC) Noise level -48/40/32 db (Make:- Carrier /Voltas/ Blue Star / equivalent) (SR)M-1987 |
| 566 | Supply and installation of 1.5 TR capacity 5 star rated energy efficient Hi-wall mounting split type Air-conditioning unit consisting of outdoor condensing unit complete with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc., and 1 number indoor unit comprising evaporator unit with cooling coil, blower motor and connected accessories, control etc., with copper refrigerant piping and cord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V +/- 10% 50 Hz single phase A.C. supply adhering following norms(SR)M-1986 |
| 567 | Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay(SR)M-1988 |
| 568 | Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay(SR)M-1989 |
| 569 | Supply and laying of 5/8\\" and 3/8\\" copper pipe (Extra beyond 3 metres supplied with AC unit)(SR)M-1990 |
| 570 | Supply and fixing of MS stand for fixing outdoor unit(SR)M-1991 |
| 571 | Supply and run of PVC 25mm rigid pipe for drain water on wall and ceiling with painting of suitable colour |
| 572 | Labour charges for cutting the wall for run of copper pipe and drain water pipe |
| 573 | Supply, Installation, testing and commissioing of VRF Indoor air conditioning units with direct driven fan, high efficient filter, inbuilt microprocessor thermostat, electronic expansion valve,Cordless remote control for all indoor units given below. The capacities are as mentioned below:- |
| 574 | Cooling Capacity:1.5 TR |
| 575 | Cooling Capacity:3.00 TR |
| 576 | Cooling Capacity:2.00 TR |
| 577 | Hiwall split AC |
| 578 | Cooling Capacity:2.00 TR |
| 579 | Supply, Installation, testing and commissioning of Side/Top discharge Outdoor units consists of scroll / rotary compressor, DC fan motor with aero-spiral fan blade, e-pass heat exchanger, safety valves, solenoid valves, receiver, capilary tube, check valve, electronic expansion valve, high pressure switch, low pressure sensor, pressure regulating valve refrigerant filter, stop valve, accumulator . The VRF outdoor unit shall be selected at 45 deg C ambient conditions. |
| 580 | 26 HP side/top discharge |
| 581 | 24 HP side/top discharge |
| 582 | 16 HP side/top discharge |
| 583 | 14 HP side/top discharge |
| 584 | Supply and installation of Refnet joints (Refrigerant branch kit) for taking branches between two outdoor units and various indoors as per VRF scheme drawings. The refnet joint set consists of both liquid and gas line branch kits. |
| 585 | Lifting,Shifting,Installation, Testing and Commissioning of Outdoor units |
| 586 | Lifting,Shifting,Installation, Testing and Commissioning of Indoor units . |
| 587 | Supply and fabrication of MS channel/ Pedastal arrangement for Outdoor units |
| 588 | Supply and erection of Hard drawn Refrigerant Copper pipes to integrate outdoor / indoor units. The rate shall inclusive of closed cell nitrile rubber insulation for copper pipes. The pipe sizes and insulation thickness as follows. ( suction pipe should be 19mm thick nitrile rubber hose with class o insulation & liquied pipe line should be 13 mm thick nitrile rubber hose with class o insulation ) |
| 589 | 6.4mm dia with insulation |
| 590 | 9.5mm dia with insulation |
| 591 | 12.7mm dia with insulation |
| 592 | 15.9mm dia with insulation |
| 593 | 19.1mm dia with insulation |
| 594 | 22.2mm dia with insulation |
| 595 | 28.6mm dia with insulation |
| 596 | 36.9mm dia with insulation |
| 597 | 41.3mm dia with insulation |
| 598 | 44.5 mm dia with insulation |
| 599 | Supply and erection of following sizes perforated type cable tray made out of GI sheet folded to required shape with adequate number of supports for Insulated refrigerant pipe and cable . |
| 600 | 300mm wide |
| 601 | Supply and laying of 3C X 1.5 Sqmm copper sheld flexble cable with PVC conduit - Communication and Control cabling between indoor and outdoor units. |
| 602 | Supply and fixing of 13mm thick closed cell nitrile rubber insulated PVC pipe (for drain) cut to required length and installed with all screw joints, reducer, necessary elbows and tees. |
| 603 | 50 NB |
| 604 | 40 NB |
| 605 | 25 NB |
| 606 | Supply ,Installation, Testing and commssioning of 63 Amps isolator |
| 607 | Supply and laying of 4c x 16 sqmm cu armoured cable between Isolator and Outdoor unit. |
| 608 | Supply and filling of R410a Refrigerant gas |
| 609 | Supply and Installation of 16 Zone two loop addressable Fire Alarm Panel with fire and fault indications, alarm cancel, system reset and lamp test buttons. Battery charger and battery back up. Panel shall be wall-mounting type and shall operate on 230 VAC single-phase supply. Make: AGNI/Eqvlt (Quotation enclosed) |
| 610 | Supply and Installation of 12 Zone one loop addressable Fire Alarm Panel with fire and fault indications, alarm cancel, system reset and lamp test buttons. Battery charger and battery back up. Panel shall be wall-mounting type and shall operate on 230 VAC single-phase supply. Make: AGNI/Eqvlt (SR) M-0767 |
| 611 | Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.(SR) |
| 612 | Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (SR) |
| 613 | Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel/ Equivalent) |
| 614 | Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. |
| 615 | Supply and Erection, Testing, Commissioning and Handing over of 1 Nos. 13 persons capacity passenger Lifts (884 Kgs) as per following technical specifications. |
| 616 | Technical Specifications : |
| 617 | 1.Number of Lifts/Type of lift: One / Nextra -Passenger, Gearless without Machine Room. (Passenger Lift with MRL) |
| 618 | 2.Load/Speed: 13 Persons 884 Kgs.) / 1.25 Mtr. Per Second |
| 619 | 3.Drive: Microprocessor based VVVF - Closed Loop |
| 620 | 4.Travel/ PIT / HEADROOM: 20 Meter, / PIT 1600mm/ HEADROOM 4750mm |
| 621 | 5. Number of Floors: 3 (Ground + 9 Upper Floors) |
| 622 | 6. Floor Display Char: 0,1,2,3 |
| 623 | 7.Number of Landing Entrances: 10 (Ground + 9 Upper Floors) |
| 624 | 8.Number and Position of Car Entrances: 1(ONE), In Front only |
| 625 | 9.Position of Machinery: Directly above the Lift well - Gearless |
| 626 | 10.Size of Lift well: 1840 x 2570(MM Wide * MM Depth ) |
| 627 | 11.Lift Car Inside Size: 1200 x 1800 x 2200 x (MM Wide * MM Depth * MM Height * MMC- Value ) |
| 628 | 12.Clear opening of Gates/Doors/Lintel Ec- Value: 800 x 2000 (mm Wide * MM Depth * MM Height) Lintel - 2200 mm ECTN0138598. |
| 629 | 13.Type or Design of Lift Car: Stainless Steel (1.5 mm) - Hairline Finish |
| 630 | 14.Car Ceiling - Car Floor: Sleek (Small Circular Lights) - SS Hairline Finish - PVC |
| 631 | 15.Car Fittings: LED Lights & Regular (Circular) - Fan |
| 632 | 16.Type of Car Front Entrance Protection: Power operated centre opening sliding door -SS Enveloped (1.5mm) Hairline Finish. |
| 633 | 17.Land Entrance Protection (0,1,2,3): Centre opening sliding door -SS Enveloped (1.5 mm) - Hairline Finish |
| 634 | 18.Landing Door Frame (0,1,2,3): Stainless Steel (1.5 mm) - Hairline Finish |
| 635 | 19.Type of Control System: Microprocessor based simplex selective collective control with / without attendent |
| 636 | 20.Electric Supply: AC 3 Phase, 50 Cycles, 415 Volts + 10%_ |
| 637 | 21Car Display: Orange Square Dot - Matrix Schrolling display - Vertical |
| 638 | 22. Floor Display 0,3,2,1: Orange Square Dot -Matrix Schrolling display - Vertical. |
| 639 | 23. Emergency Alarm Bell: Battery operated Alarm Bell to be provided with automatic charging device. |
| 640 | 24. Emergency Light : Battery Operated Light to be provided with automatic charging device. |
| 641 | 25. Fireman's Switch: To be provided at Ground Floor |
| 642 | 26. Minor Builders Work : To be Provided by lift Contractor |
| 643 | 27. Scaffolding : To be Provided by lift Contractor. |
| 644 | 28. Stainless steel still angles and facia plates: To be provided by lift contractor . |
| 645 | 29. Steel for Lift machinery : To be Provided by lift contractor. |
| 646 | 30. Servicing and Maintenance : Free Comprehensive servicing and maintenance should be provided by lift contractor during the guarntee period of One Year. |
| 647 | 31. Provision of 1 + 3 EPABX intercom with phone to be provided at the following places vide: 1. Lift Head Room 2. Reception Room and 3. Inside the Lift by Lift Contractor. |
| 648 | 32. Lift License : Preparation of drawing , Payment of charges to CEIG and insurance policy if any and obtaining CEIG safety certificate and lift license as per Lift act should be done by the lift contractor. |
| 649 | 33.Automatic rescue device : To facilitate the landing of the nearest floor at the time of power failure . |
| 650 | 34. This shall consist of suitable type battery system with charger inverter under voltage protection system etc., |
| 651 | .Special Inclusions:1. Call Register Signal and Vf Door Operator2. Push Button - Orange LED Illumintion.3 Full Car Operating Panel4. Floor Annunciator5. provision for CCTV Camara - Analog (Coaxial Cable) 6.. False Ceiling In Car7. Fire Rating Of Landing Doors - Two hours8. Infra Red Door Screen9. Overload Warning Indicator10. Pit Ladder 11.. Ss Handrail 12. Sill Support 13.Landing Push Box On Wall.(SR) |
| 652 | Supply of 15KVA (three phase input / single phase output ) microprocessor controlled double conversion true online ups system with builtin isolation transformer, auto phase sequence correction, power factor correction, builtin manual bypass arrangement with exide sealed maintenance free batteries for 2 hours backup time with suitable interlink cables and ms powder coated rack for batteries CONFIGURATION: True On line double conversion ups system with pulse width modulation (PWM) Technology using IGBT inverter. RECTIFIER: Full wave (shall fully meet the specified input power requirements ) INPUT: 3 phase 320V – 460V OUT PUT:230V +1% on battery mode FREQUENCY: 47HZ-53HZSYSTEM DC VOLTAGE: 360V |
| 653 | INVERSION TECHNOLOGY: Micro processor controlled, pulse width modulation with Instantaneous sine Wave control using IGBT. INVERTER OUT PUT : ( Out put Galvanic Isolation through Double winding Isolation Transformer at Output of Inverter shall be part of UPS Design ) LOAD POWER FACTOR: 0.8 to lag to unity REGULATION : for Balanced load + 1% For 100% unbalanced load + 2%FREQUENCY: 50Hz + 0.5%WAVE FORM : True sine wave TOTAL HARMONIC DISTORTION : Less than 5% |
| 654 | OVERLOAD CAPACITY: Inverse Time Characteristic 125% for 10 minutes 150% for 1 minutes EFFICIENCY : 1. Converter – 90% 2.Inverter - 85% 3. Overall – 80 % ( full load) OPERATING TEMPERATURE : 0 to 45 Degrees centigrade on full load CREAST FACTOR: 3 : 1RELATIVE Humidity : : 95% at 35 Degree Centigrade non- Condensing CHARGER: Built in solid state automatic float- cum boost charger with constant current, constant voltage mode of charging along with current limiting features. Ripple in DC shall not exceed 2% when battery is disconnected. PROTECTION( in built)i) output under Voltageii) output over Voltageiii) ) output over loadiv) output short circuit.v) HRC fuses /output/ battery vi) Battery low tripvii) battery charges current limit. (SF-Collector Chamber, SF- Meeting Hall, FF- NIC,GF_ GDP Hall & TF- Meeting Hall)(SR) |
| 655 | Supply and Installation of copper 18 mm Copper Rod size of 8 feet length buried in earth including excavation of earth upto the depth of 8 feet and closing the pit. Fill with bentonite 25 kgs chemical and including PVC pit cover. (MR) |
| 656 | Supply and Installation of copper air terminal spike arrestor with base and all fittings.(MR) |
| 657 | Supply and installation of 70Sqmm Copper Cable run on the external wall from terrace to the ground floor in PVC 1\\" Conduit. (MR) |
| 658 | Supply and fixing of Aviation lamp for the Security purpose of the Multi storage Buildings Placing at the top of the Building with suitable necessay connection. (Bajaj/Equ) (MR) |
| 659 | Supply, Installation, Testing and Commissioning of norminal capacity ceiling suspended ductable air conditioner with the following components. Ceiling suspended Ductable Air conditioner high tech,low height,low noice level indoor unit with fin and tube type cooling coil,Detachable type drier provided in refrigerant cicuit to reduce moisture content multi stage type distributor for feeding equal quantities of the refrigerant mixture to all the section of the coil,with required valves,directly coupled blower to reduce troubles and wear & tear compared to belt drive blower.Thermostatic expansion valve lift and pull type aluminum framed durable,washable air filter.Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45 F suction temperature Auto reset type HP/LP safety cut to improve reliability of compressor. |
| 660 | Supply of Ductable air conditioner high tech Outdoor unit with power saving high efficiency sturdy and rugged scroll comprssor with inbuilt internal thermal protector,internal pressure relief valve,Auto reset type HP/LP safety cut out to improve reliability of compressor and condenser shell be made of super slit high efficient aluminum fins mechanically banded to copper tubes condenser 'L' type coil to be rigidly fixed to unit frame with fasteners.imported condenser fan & fan blades to be statically and dynamically balanced to reduce noise and vibration.The fans are direct driven 3 or single phase motor with protection.Condencing temperature 130' F for the system operations. |
| 661 | 11 TR, 4400 CFM |
| 662 | Supply and fixing of suitable MS angle frame for mounting the indoor units. (M-2011) |
| 663 | Supply and fixing of suitable MS angle frame for mounting the outdoor units. |
| 664 | Supply and filling of R-410a/407a Refrigerant gas. |
| 665 | Supply and fixing of flexible canvas connection between indoor unit and ducting. |
| 666 | Supply and fixing of hard drawn copper refrigerant piping of 1 1/8\\" dia,interconnecting indoor and outdoor units with necessary fittings,supports etc. |
| 667 | Supply and fixing of hard drawn copper refrigerant piping of 5/8\\" dia,interconnecting indoor and outdoor units with necessary fittings,supports etc. |
| 668 | Supply, Fabrication and erection of fabricated ducting made up of GI sheets of complete with angle supports angle flanges, anchor fastess, tees and bends where ever necessary etc as required. |
| 669 | 20 gauge Sheet |
| 670 | 22 gauge Sheet |
| 671 | 24 gauge sheet |
| 672 | Supply, fabrication and Erection of Angle Frame for Ducting. |
| 673 | Supply and fixing of extruded aluminum powder coated supply and return air grilles with volume control damper. |
| 674 | Supply and fixing of water drain pipe line (1 inch PVC pipe) |
| 675 | Supply and fixing of duct mouth damper. |
| 676 | Supply and providing acoustic for initial portion of ducting with 12mm thick open cell insulation. |
| 677 | Supply and providing thermal insulation of 9mm thick vidoflex with aluminum foil. |
| 678 | Supply and providing of pipeline nitral rubber insulation for section line Refrigerant pipe and Drain pipe as required. |
| 679 | Wall opening for Supply Air Duct and Refrigerant Copper Pipes with Labour work charges.Towards charges for Lifting, Shifting & Scoffolding Charges for AC Indoor & Outdoor Units |
| 680 | Towards charges for welding, leak testing, Nitrogen pressure testing, pressure holding, vaccummising, dehydration and other related works etc. |
| 681 | Supply and laying of 4core 10 sq.mm power cable for connecting the main power supply from Main power control board to outdoor unit and control wiring systems. (MR) |
| 682 | Supply and laying of 7 core 2.5sq.mm control cable outdoor unit to Indoor unit for Sqmm copper flexible cable |
| 683 | Charges for the Preparation of samples and letters for the Quality testing Certificate to the Electrical materials used in construction purpose for this Project campus for PVC conduit pipes, Electrical Wires, Distribution boards, MCB's, MCCB's and Switches, Sockets and LTUG Cables from the Central Electrical Testing Laboratory, kakalur lab/National Test House, Tharmani. |
| 684 | Supply, Erection, Testing, Commissioning and Handing over of 1 No 250 KVA Diesel Generator with AMF Panel acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 600 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ Greaves/Equivalent) 1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro) 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Mufler 14. Fly wheel with starter ring. |
| 685 | ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator. SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure 2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load. 2. ALTERNATOR : Alternator capacity of 250 KVA/ 200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivlent.) |
| 686 | 3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of holewithin 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if |
| 687 | any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade. 4. FUEL TANK : 350 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance. 5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. |
| 688 | The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges. 6. Battery: 2 Nos 12V 180AHR Battery (Ashok Leyland/Cummins/Kirloskar or Equivalent) (SOR RATE) |
| 689 | Supply of lubricating oil and first filling with charging of starting battery and supply of 210 Ltrs diesel for 2 Nos of 250 KVA Generator to run the geneset for minimum of 8 hours testing again handed over to occupied depatrment. |
| 690 | Supply and Run of 12 core 2.5 sqmm armoured copper control cable FRLS in suitable PVC rigid pipe on wall/Ground/ceiling with connection (For AMF to 250KVA Genset) (DATA-29) |
| 691 | Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection.(SD-104) |
| 692 | Supply and erection of G.I. Stepped tubular pole of 8 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 114.30mm OD x 5.40mm Thick x 4500mm Length, 88.90mm OD x 4.85mm Thick x 1750mm Length, 76.10mm OD x3.25mm Thick x 1750mm Length, with single arm ornamental bracket of outer dia 50 mm pipe bent suitably to give a height of 1.5 mtr and overhang welded suitably with ornamental bracket and fixed rigidly with 8 Nos of bolt and nuts to prevent any turning movement of bracket due to wind with sheet moulded compound (SMC) junction box IP 42 protection of size (295mm x 225 mm x 120mm) , fire proof of suitable size with 4 way terminal block with hylem sheet of size (250mm x 200mm x 6mm) with 1 No. 16 A fuse unit with 1 No. suitable links provided at a height of 2.0 mtr from the ground level with embossing of metalic \\"DANGER 440 V\\" with earth connection with earth bolts of size 8mmx25mm welded on the pole at one end with 4 mtr of 40 mm PVC pipe for incoming and outgoing cable. The pole shall be provided for coil earth with No. 8 |
| 693 | for coil earth with No. 8 SWG GI wire of 11.5 mtr of length in which 10 mtrs of total length compressed in to a coil of one meter length. The pole shall be painted with one coat of red oxide primer paint and two coats of aluminium paint of reputed make to the length of pole with supply and fixing of 150W LED street light with necessary connection wire from junction box to the fittings with 3 x 1.5 sq mm PVC copper wire for each fitting with pole earthing with necessary connections testing and commissioning as per the specification. The pole should be mounted on the special type of bracket which would be fixed on the side of the crash barrier and the details are as follows The bracket should be fabricated like diagnal cut of the cubic structure with 25 mm thick plate of size |
| 694 | The bracket should be fabricated like diagnal cut of the cubic structure with 25 mm thick plate of size 425x400x25mm with 8mm thick stiffner plate for side support and providing 8 Nos 25 mm hole for fixing the bracket on wall with special flange on the other side of barrier, with necessary M14 and M16 bolt with spring washers, nuts etc.,( DATA-30) |
| 695 | Supply and fixing of LED Gate Light Fittings -45W (havells Make , Model: CORALPT45WLED757PSYMTOPC (Higher End Philips/Havells) on the existing post/wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads MS clamps and aluminum painting. (DATA - 31) |
| 696 | Supply and fixing of Slimmy Torch Bollard [Dimension : Ø106 x 975mm] 24W LED with Bolt & Nuts Model ID KP9205 arangements with necessary clamps. (Make: K Lite only) (DATA-32) |
| 697 | Supply and Laying of 3 core 4 Sqmm copper armoured cable LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (For Bollard Light )(DATA-33) |
| 698 | Supply, Erection, testing and commissioning of 11KV 25 KA630Amps 3 Panel HT Indoor RING MAIN GEAR panel board suitable for Indoor installation comprising two incomer panels with Air Break/ load Breaks switches and one outgoing panel with Vacuum Circuit Breaker complete as per TANGEDCO specification with Mechanical inter lock between incomers. 1. Supply and Erection of Draw out type 11KV 25KA 630Amps Horizontal draw out / Horizontal Isolation VACCUM CIRCUIT BREAKER filled with motor(230V AC) operated spring charged Mechanism, with ON and OFF mechanicalIndicator Anti Pumping Device, 110V DC Shunt Trip and Closing Coils (DC source of supply to be derived from a power pack suitable for three Tripping and two closing operations incorporated on Incoming panel only) Mechanical Operation counter, 4NO + NC Spare Aux. Contact with contact multiplication Contactor for customer use. Automatic safety shutter, Mechanical close/Trip Knob, Mechanical ON/OFF Indication, Operating Handle, 230V AC to 110V DC Power pack operating Handle etc.-1No Operation counter, 4NO + NC Spare Aux. Contact with contact multiplication Contactor for customer use. |
| 699 | Automatic safety shutter, Mechanical close/Trip Knob, Mechanical ON/OFF Indication, Operating Handle, 230V AC to 110V DC Power pack operating Handle etc.-1No mechanism , 2 NO+ 2NC Aux. |
| 700 | Contact operating handle etc.-1No. 2. Supply and erection of 11KV 630Amps 25KA HT Air Break/Load Break Switch with mechanically inter locked earth switch, front operated spring assisted manual closing 3. 11KV/Root 3/110V/Root3-Three Phase 3 Limb 50VA class0.5 Resin cast Draw out type potential Transformer complete with HT and LT HRC fuses with sealing |
| 701 | arrangement-3 Nos. 4. Current Transformer of Suitable Ratio/5-5A dual Core (Core 1-5VA Class 0.5 for Metering & Core 15 VA 5P 20 for Protection - 3 Nos 5. Meters: Analog ammeter with 5 position selector switch -1 No Analog Voltmeter with selector switch-1 No cut out provision to receive digital Trivector Meter L&T or secure tobe provided. 6. Protection: MCDG 61 TP ND IDMT two over current and one earth fault Relay with higher set Instt. Elements 1.3Seconds-1 No Master Trip relay Mega win MVAJH 13eqivalent-1 No 7.Breaker On/Off indication LED Type-2 No Auto Trip/ Healthy Trip and spring charges indication LED type-3 Nos phase indicating Lamps RYB - 3Nos |
| 702 | 8.TNC Breaker Control Switch -1 No local Remote selectorswitch- 1 No Push button for trip Healthy- 1 No 9. Necessary Control wiring with Copper wire 10. 630Amps Copper Bus bar PVC sleeved & required panel Earthing 11. Common for Switch gear MCB's for AC/DC Control Heater ON/OFF switch with space Heater and thermostat, single phases switch socket, cubicle illumination TL lamp, Door switch fullycovered Test Terminal block of IMP make(whereverapplicable) |
| 703 | 12.MS Sheet steel Enclosure for outdoor Installations powdercoated with siemens Grey paint finish. 13. Provision through bottom entry to receive Incom&Outcable excluding cable glands and cable Termination Kit (Make: Megawin/Siemens/or Equivalent) (DATA-34) |
| 704 | Single VCB Panel For Distance protection:- supply, erection, testing, commissioning and of11KV 25KA HT Single panel Vacuum Circuit Breaker Switch,Indoor type for Indoor installation, board comprising one group control incomer 800A 500MVA VCB. 1).Draw out type 11KV 500MVA 800A Horizontal Draw out/ Horizontal Isolation VCB operated with spring charged mechanism.Anti Pumping device ,110V DC Shunt Trip and closing Coils (DC source of supply to be derived from a Power pack suitable for 3 Tripping and Two closing operation counter, 4 NO + 4NC spare Aux. Contact for customer use, Automatic safety shutter, Mechanical Close/ Trip knob, Mechanical ON/OFF indication, Operating Handle, 110V AC-110V DC Power Pack etc. (Incom-1 & Outgoing-1No) |
| 705 | 2.) 11KV/Root 3/ 110V/Root3- Three Phase, 3 Limb 200VA Class 1 Resin Cast Draw out type Potential transformers complete with HT and LT HRC fuses. (Incoming-1 No)3)Current Transformers of 100-50/5-5Amps.Dual Core(Core 1-15VA class 1 for metering and core 2-15VA 5P 10 for Protection) Incoming 1 No,Current Transformers of 100/5-5 Amps Dual Core (Core 1-15VA Class 1 for Metering and Core 2-15VA 5P 10 for Protection)(Outgoing-1) |
| 706 | ).Meters: Digital Ammeter with Selector Switch (Incoming 1 No. Outgoing 1 No) Digital Voltmeter with selector switch (Incoming 1 No) Digital Trivector of L&T/Secure make (Incom-1No) Digital Power Factor Meter (Incom-1 No)Digital Frquency Meter (Incom-1 No)5.)Protection: TP ND IDMT 2OC + 1EF Relay with Highest inst.Elements similar like Megawin type MCDG 61 (Incom-1No)6) TP ND IDMT 2OC + 1 EF Relay similar like Megawin type MCDG 31 Master trip Relay Megawin MVAJH 13 (Incom-1No & Out-1 No) |
| 707 | 7)Breaker ON/OFF/Auto Trip/Healthy/Spring Charged Indication Lamp LED Type 8) Phase Indication Lamps R,Y,B(Incomings 3 Nos)9) Control Wiring10) 800Amps Copper Bus bar PVC Sleeved and required panel copper earthing.11)Control switch TNC (Incoming-1No, Outgoing -1No)12)Trip Circuit healthy Push Button(Incoming-1 No, Outgoing -1No) |
| 708 | 13)Common for Switch gear, MCB's for AC DC Control, Heater ON/OFF Switch with space Heater and thermostat Single phase switch socket, cubicle illumination lamp, Disconnecting type terminal Block.etc.,14)MS Sheet enclosure for Indoor Installations Powder coated with Paint shade Siemens paint finish provision through Bottom entry to receive Incoming and Outgoing cable excluding cable glands and cable termination etc., (DATA-35) |
| 709 | Four panel HT VCB:- Design, manufacturing supply, erection, testing, commissioning and handling over of 11KV 25 KA HT Four panel Indoor type Vacuum Circuit Breaker Switch Board Comprising one number 630A 500MVA VCB as incoming and 3Nos. 630A 500MVA VCB as outgoing panels for outdoor installation each panelcomprising. 1) Draw out type 11KV 500MVA 630A Horizontal Draw out/ Horizontal Isolation Vacuum Circuit Breaker operated with Spring charged mechanism. Anti Pumping Device,110V DC shunt Trip and closing Coils (DC source of supply to be derived from a Power Pack suitable for 3 Tripping and Two closing operation counter, 4 NO + 4NC spare Aux. contact for customer use, Automatic safety shutter, Mechanical Close / Trip knob, Mechanical ON/OFF indication, Operating Handle, 110V AC - 110V DC Power Pack etc. (Incoming 1 No. Outgoing 2Nos.) 2) 11KV /Root 3/110V/Root 3 - Three Phase, 3 Limb 200V A Class 1 Resin Cast Draw Out type Potential transformers complete with HT and LT HRC fuses. (Incoming - 1 No.) 3) Current Transformers of 120 - 50/5-5 Amps. Dual Core (Core 1 - 15 VA class 1 for metering and core 2 - 15 VA 5P 10 for Protection) Incoming 3 Nos, Current Transformers of 60/5-5 |
| 710 | Amps Dual Core (Core 1-15VA Class 1 for Metering and Core 2 - 15VA 5P 10 for Protection) (Outgoing 3Nos) |
| 711 | 4) Meters : Digital Ammeter with Selector Switch (Incoming 1 No. Outgoing 3Nos Digital Voltmeter with Selector Switch (Incoming 1 No.) Digital Trivector of L&T / Secure make (Incoming 1 No.) Digital power Factor meter (Incoming 1 No.) Digital Frequency Meter (Incoming 1 No) 5) Protection : TP ND IDMT 2 OC + 1 EF R with Highest inst. Elements similar like Megawin type MCDG 61. (Incoming 1 No) 6) TP ND IDMT 2 OC + 1 EF Relay similar like Megawin type MCDG31 Master trip Replay Megawin MVAJH 13 (Incoming 1 No.Outgoing 3 No) 7) Breaker ON/OFF/Auto Trip/Healthy Trip/Spring charged Indication lamp LED type (Incoming 5 Nos. Outgoing 5 Nos.)8) Phase Indicating Lamps R,Y and B (Incoming 3 Nos)9) Control Wiring 10) 800Amps Aluminium Bus Bar PVC sleeved and required panel copper Earthing. 11) Control Switch TNC (Incoming 1 No. Outgoing 3 No.) 12) Trip Circuit Healthy Push Button (Incoming 1 No. Outgoing 3 No.) 13) Common for Switch gear, MCB's for AC DC Control, Heater ON/OFF Switch with space Heater and thermostat single phase switch |
| 712 | socket, cubicle illumination lamp, Disconnecting type terminal Block etc. 14) MS sheet enclosure for outdoor Installation Powder Coated with paint shade siemens Grey, paint finish Provision through Bottom entry to receive Incoming and Out going cable excluding cable glands and cable termination kit. (Make : system control / Megawin) (DATA-36) |
| 713 | Supply and laying of 11KV 3 Core 300 Sqmm XLPE UG cable in a trench to be excavated at a depth of 1.0 mtr. Putting 0.15 mtr. Layers of sand covering the HTUG cable completely with cement concrete RCC cable turf and refilling the earth to make good. (DATA-37). (From RMG to Single Panel VCB And From Single Panel VCB to Four Panel HTVCB ) |
| 714 | Supply and clamping at 11KV 3 core 300 sq.mm XLPE UG cable on wall with M.S. special clamps. (DATA-38) (from RMG Single panel and Single Panle to Four Panel HT VCB) |
| 715 | Supply and providing cable end termination suitable for 11KV 3 core 300 sq.mm XLPE HTUG cable with necessary indoor type heat / cold shinkable joint kit and accessories. Make: RayChem / M.Seal. ( RMG-1Nos, Single Panel - 02 Nos,Four panel HTVCB-1No) (DATA-39) |
| 716 | Supply and laying of 11KV 3 Core 185 Sqmm XLPE UG cable in a trench to be excavated at a depth of 1.0 mtr. Putting 0.15 mtr. Layers of sand covering the HTUG cable completely with cement concrete RCC cable turf and refilling the earth to make good. (DATA-40) (From Four Panel HTVCB to 250KVA Transformer 1 & 2) |
| 717 | Supply and providing cable end termination suitable for 11KV 3 core 185 sq.mm XLPE HTUG cable with necessary indoor type heat / cold shinkable joint kit and accessories Make: RayChem / M.Seal. (4 panel HTVCB-2Nos & 250KVA Tr. 1&2 - 2Nos) ( DATA-41) |
| 718 | Supply, Erection, Testing and Commissioning of 250 KVA,11KV/0.433V Dyn11,ONAN, Outdoor Type, double wound, Energy Efficient Transformer with ON LOAD TAP Circuit type. distribution transformer confirming to relevant IS.1180 Level-2 and fitted with the following. 1.Rating &connection diagram plate2.Earthing terminal3.Lifting lugs for whole Transformer4.Cover lifting lugs5.Oil level gauge-plain with level marking6.Bottom filter cum drain valve with plug7.Top filter valve with plug8. pocket for Thermometer 9.Oil Conservator with drain plug 10.Oil filling point with cap on the conservator11.Air release plug12.Silicagel breather13.Monogram plate14.Explosion vent with diaphragm15.Transformer oil16.Under base channel with skids17.Oil temperature indicator with A/T Contacts18.Winding temperature indicator with A/T Contacts |
| 719 | 19.Marshaling box20.Bi-directional rollers.21.Buchholz relay with A/T Contacts22.DetachableRadiators.23.Off circuit tap switch24.Conservator shut off valve25. Neutral CTSpecial accessoriesThe transformer should be supplied with first filling of oilTerminal arrangement:- HV-Cable box,LV-Flange to suit bus duct. All removable covers shall be provided with weather proof hot oil resistant, resistance gaskets, to prevent leakage of water in to core, and oil from the tank with Transformer plinth construction of 250KVA as per IS 1180 (Make Indotech/CREL/ROWSON) (DATA-42) |
| 720 | Supply and laying of 2 runs of 3 ½ x240 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with Dura Duct Hose 120/103.mm and refilling the earth to make good. (DATA-43) (1)From 2 Nos 250KVA Transformer to MV Panel |
| 721 | Supply and clarnping of 2 runs of 3 1/2 x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-213*2) (1447*2=2894) 1)From 2 Nos 250KVA Transformer to 800A MV Panel |
| 722 | Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC LTUG aluminium armoured cable with earth connection. ( 8 Nos- HT work)(SD-172) |
| 723 | Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (DATA-44) |
| 724 | MV PANEL BOARD:- Design, Supply, erection, testing and commissioning of 800A floor mounted MV cubical panel board bus bar chamber dust and vermin proof and accommodating the following ACB's & MCCB's 2 Nos.630A ACB as Incomer (400A is Setting) units with the following items of work complete to satisfy the latest IS rules and CEIG guidelines. Supply and fixing of suitable size bus bar chamber made up of 16 SWG MS sheet steel with 4 Nos ie R,Y,B,N. 2” X 1/2”(50mm x 12mm) tinned copper bus bar for 3 phases and neutral and 2 Nos. of earthing bus of size 2”X ¼ (2 x 50mm x6mm) tinned copper bus on suitable bus bar insulator (Epoxy insulator)With maximum creepage distance and supported on MS Base channel frame work ofsize 4”X2”X¼-1Set(100mm x50mm x6mm) Incoming :1)Supply and fixing of 2 Nos. 630A basic rating 4 pole 433V LT ACB confirming to IS 13947 – 2 IEC 60947 – 2 for higher breaking capacities of 50KA at 690V AC with all accessories for standard horizontal Electronically draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with micro processor SR 18 G relay, over current trip device adjustable to LTD, STD and release for over current protection UV release with time delay |
| 725 | , EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate mould base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE |
| 726 | rules inforce with interconnection and terminations as required in specification. BUS COUPLER:-Supply and fixing of 1 No 800A basic rating 4 pole 433 V LT ACB incoming to IS-13947-21EC60947-690VAC(catno.ST35567 4Pole 75KA)with all accessories for standard horizontal type ACB equipped with micro processor based SR18G. Outgoing: 1) Supply and fixing of 400A 3 Pole MCCB with spreader link and Extended Rotary handle-4 Nos 2) Supply and fixing of 250A 3 Pole MCCB with spreader link and Extended Rotary handle-6 Nos 3)Supply and fixing of 160A TP MCCB with extended Rotary handle and Spreader terminals -3Nos. |
| 727 | Inter connecting the all LT ACB’s and MCCBs to two bus bar with suitable insulated tinned copper flats and painting of phases and neutral indication. Double Earth connection of the MCCBs and ACB’s to earth bus using suitable tinned copper flats by 2 runs of 1” X 1/4” Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments with in the cubicle by CEIG rules with , 2 sets, of supply and fixing Electronic Trivector EC, 300P class 0.5 Base mounting L&T or equivalent.(Make–Model. ER300P class 0.5) Supply and fixing of danger board with siemens grey powder coating with super scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc.Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel,concreting, testing and commissioning (L&T/Siemens/ABB) (DATA-45) |
| 728 | Supply and erection of 100 KVAR 415/440Volts 50Hz 3 Ph automatic power factor correction panel, 16 stage, (at 0.95 lag), made up of powder coated, 14/16 SWG CRCA sheet steel enclosure with 1 1/2\\" x 1 1 1/2\\" x 1/2\\" AI Frame work with RCC concreting foundation and bolted to masonry pedestal with 250A TPN MCCB as incoming (L&T/Siemens/C&S) with Delta Connected capacitors (BCH/EPCOS) MOO Type operating in multiple stage with 3 current and Voltage Transducers (CVT) at the phases simultaneously to activate the desired power factor switching time between steps 120 seconds, switching off time in case of fault 3 seconds with a LCD display to show the following Parameters.a. Vr – R phase Line Voltageb. Vy – Y phase Line Voltagec. Vb – B phase Line Voltaged. Ir – R phase Line currente. Iy – Y phase line currentf. Ib – B phase Line Currentg. KW – Present Kilo Wattsh. RKVA – Present KVAR Demand i. KVA – Present KVA j. PF – Present Power Factork. Number of Capacitor bank ON/OFF |
| 729 | l. Provision to indicate the imbalanced load m.Provision to indicate the change in phase Sequence n. The APFC Panel Should also have built in protection for current imbalance. For high Voltage/Low Voltage cut off, single phase Preventer, provision for inductor coil to cater the in-rush currents, line surges, Current Limiters, Current Sensor, etc., with connection complete and as per the relevant IE Rules. Eight Stages of Automatic Power Factor control panel with necessary connection. Make. (L&T /or equivalent (DATA-46) |
| 730 | SUB-STATION EQUIPMENTS:- Supply and Erecting of safety accessories.SR.XIII PART “M” 8 Item (a) to (i) . (SOR RATE) |
| 731 | Supply, fixing, testing and commissioning of AC Chargeable emergency lamp 2 x 11W PL lamp with all connected accessories |
| 732 | Supply and installation of 2.5mm thick Rubber Mat with ISI suitable for 1.1KV installation confirming to IS 15652 (5Nos=1set) |
| 733 | Supply and Providing approved make First aid box complete with all first aid medicines |
| 734 | Supply and providing shock treatment chart fixed in glass frame (Tamil and English) |
| 735 | Supply and fixing of the 4nos fire buckets stand suitable for 4 nos fire buckets made out of 40 x 40 x6mm MS angle |
| 736 | Supply of hand gloves 11 KV grade |
| 737 | Supply and installation of Danger Board as required by the electrical authorities |
| 738 | Supply and erection of Fire extinguisher Co2, 4.5 Kg confirming to TAC norms |
| 739 | Earth Discharge Rod |
| 740 | Preparation of site plan physical layout electrical schematic diagram in 5 sets , getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining CEIG safety certificate preparation of 2 sets of approved drawing and a copy of safety certificate in a neat frame work to be fixed in HT/Generator room and payment of CEIG inspection fees for HT and 250 KVA & 200 KVA Genset.(As Per Quotation) |
| 741 | Supply, erection ,testing and commissioning of 3 KVA ONLINE UPS system with 1 Hr backup with Exide Heay duty battieries SMF battieries for the following configuration 1) True ON LINE –UPS SYSTEMS with Pulse width modulation(PWM) Technology using IGBT Inverter. 2) INPUT VOLTAGE RANGE : 170V-270V 3)OUTPUT VOLTAGE : 230V ± 1% 4)DC Volt:120V 5)INPUT FREQUENCY : 50Hz ± 5% 6)Out put Frequency: 50Hz ± 2% 7) Out put Waveform:Pure Sine Wave 8) LOAD POWER FACTOR : 0.8 to Unity 9)HarmonicDistoration: Less than 5% 10)Over Load: : 125% for 10Minutes 11)Inverter Operation : PWM-IGBT 12)Invertor Efficience : Better Than 90% 13)OPERATING TEMPERATURE : 0 to 50 Degrees centigrade’s on Full Load 14)Digital Panel Meter : To Read output A/C Volts,Output D/C Volts Frequency 15)By pass : Manual 16)PROTECTION (INBUILT) |
| 742 | a. Output Under Voltage b. Output Over Voltage c. Output Overload d. Output Short Circuit e. HRC Fuses, Output & Battery f. Battery Low trip g. Battery Charging Current Limit. 17)INDICATIONS : 1. Mains On, 2. Inverter On, 3. Load on U.P.S. 4. Battery Low 5.Over load 6.Inverter Trip. (DATA-47) |
| 743 | Supply and providing of maintenance Copper Plate Earthing technology model maintenance free earth 502 consist of 2mtr long 47mm dia outer pipe with 3.2mm thick 25mm dia inner pipe 2.6mm thick terminal flat of 30x10/12 x 12mm, the entire construction processed with hot tip galvanizing, outer surface up to100 microns all inner annular space filled with highly conductive and non-corrosive nature crystalline material along with electrode moisture booster compound of 1x25 kg bags will be supplied to fill surround the pipe at the time of installation. (Moisure retention, conduction and non-corrosive nature (Galaxy /Ashlok or equivalent) for 250KVA Tr 1&2=4Nos. (DATA- 48) |
| 744 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with ecessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 221) |
| 745 | Supply and run of 50mm x6mm (2” X 1/ 4”) copper flat with porcelain insulator with screws on wall/floor for earth connection. (SD 77- Rs.919x2=1838/-) |
| 746 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earthconnection. (SD 76) |
| 747 | Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earthconnection. (SD 77) |
| 748 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.(SD-372) |
| 749 | Supply, erection, testing and commissioning of 400A Copper Raising main made up of 16 SWG sheet steel minimum thickness of 1.8 mm bolted on to an angle iron / structural steel framework.covers the requirements of 3 phase 415 V, 50 Hz, 400A continuous rated, copper TPN bus duct shall be designed for indoor type. The Bus – duct shall be designed for the above current ratings. The Bus – bars shall be 50mm x 6mm copper Bus- bars shall be of uniform cross section along its entire length. No tapering of the bus bars’ cross-section is allowed. The bus duct shall be painted after suitable pretreatment of all structural steel and latest with anti-corrosive epoxy base primer paint & two coats of pebble / flint gray shade and dried in a oven. The enclosure shall conform to IP: 54 for indoor, as per Indian Standards.The inner surface of the Bus – duct shall be coated in the powder coating The bare bus –bars shall be provided with a coat of Matt finish. The joints in the Bus –bars shall be of the bolted type and it shall be ensured that the following precautions are observed. 1) The contact pressure must be ample and this shall be maintained during the time the panel is in service. 2) The surfaces of the conductors must be clean With flat conductors. |
| 750 | 3) The overlap should be equal to or greater than the width of the bars. |
| 751 | 4)The joints shall be treated duly for joint compound to render the joint moisture-proof 5) For the joints use of bolts of cadmium plated high-tension MS bolts having expansion characteristics due to temperature change with steel nuts. 6) Smearing the surfaces with oxide inhibiting grease just prior to making the joint in order to preserve the efficiency of the joints.Minimum phase and earth clearance required shall be maintained at joints. The joints shall be thoroughly shrouded.The Bus bar arrangement shall generally conform to IS: 5578 and |
| 752 | IS:11353. The Bus bar arrangement shall be generally confirm to IS:5578 and IS:11353.The 2Runs of Bus-bars to be stacked together or the spacing between them shall be maximum of the thickness of one conductor. The busbars shall be phase identified by colour, at intervals. Colour code shall be RED, YELLOW and BLUE for phase and BLACK for the neutral Bus- bar. The Bus-bars shall be supported on tough, non-hygroscopic, resin Bonded self-extinguishing fire retarded insulators preferably of SMC / DMC with ribbed construction to prevent tracking due to dust paths. The Bus-bars and supports shall withstand the maximum stress that are induced in the event of short-circuit current . The bus-bar support shall be a minimum interval of 500mm. 5C above the ambient temperature The clearance between the individual bare phase power bus bars and between the phase and earth Bus-bars in air shall be not less than 25 mm respectively. ( DATA-49) |
| 753 | Supply and fixing of 400A 4Pole MCCB with enclosure incoming Fixing on bottom of the 400A Lighting Raising Main control with set of spreader terminals and Operating handle with necessary cable top up box,including suitable size copper interconnection between the Incoming 400A MCCB's to 400A Raising main bus-bar with necessary angle iron frame work complete etc. (Make. L&T/ Siemens or Equiv) (DATA-50) |
| 754 | Supply and fixing of 250A 4Pole MCCB with enclosure with one set of spreader terminals and Operating handle with necessary cable top up box,including 25mm x6mm copper flat interconnection between the Raising main bus-bar to 250A 4P MCCB terminal complete earth connection etc (DATA-51) |
| 755 | Supply and fixing of 125A 4Pole MCCB with enclosure with one set of spreader terminals and Operating handle with necessary cable top up box,including 25mm x6mm copper flat interconnection between the Raising main bus-bar to 250A 4P MCCB terminal complete earth connection etc (DATA-52) |
| 756 | Supply and Installation of 4 MP IP bullet/dome Camera with SD card support, Progressive-scan CMOS Sensor, Starlight Technology for Low-light Applications, Built-in Microphone. Make:CP Plus/Eq. (Data-A1) |
| 757 | Supply and Installation of 80 channel IP Network Video recorder with 8 Sata and 1KVA UPS. Make:CP Plus /Eq. (Data-A2) |
| 758 | Supply and Installation of 8-port POE switch with Compact design for convenient placement. Make: D-link/Eq. (Data-A3) |
| 759 | Supply and Installation of 8TB built in Hard Disc Drive. Make: Seagate/Eq. (Data-A4) |
| 760 | Supply and Installation of 6U wall rack, with Fan,front glass door with lock and key facilities with 0.6 KVA UPS. (20 nos for CCTV and 23 nos for LAN + 9 nos for AP) Make : D-Link/Eq. (Data-A5) |
| 761 | Supply and Installation of 43 inch 24 x 7 Signage display (15 nos for 1st floor rooms,13 nos for 2nd floor,12 nos 3rdfloor rooms and 3 for 9th floor rooms). Make :Sony/Eq. (Data-A6) |
| 762 | Supply and Installation of Wireless mouse. make:Dell/Eq. (Data-A7) |
| 763 | Supply and laying of CAT 6 unarmored cable in existing PVC pipe on wall and ceiling. Make:D-Link/Eq. (Data-A8) |
| 764 | Supply and laying of 25mm dia PVC rigid pipe with PVC accessories on wall / ceiling/floor. (Data-A9) |
| 765 | Supply and Installation of 36U Net work rack for Server room. make:Val rack (Data-A10) |
| 766 | Supply and Installation of RJ 45 I/os with face plate and back box for LAN. Make:D-Link/Eq. (Data-A11) |
| 767 | Supply and Installation of 24 port 10/100/1000 Mbps layer -2 fully managed switch. Make: D-Link/Eq. (Data–A12) |
| 768 | Supply and Installation of 24 port fully loaded patch panel. Make: D-Link/Eq. (Data–A13) |
| 769 | Supply and Installation of 1m length patch cord. Make:D-Link/Eq. (Data-A14) |
| 770 | Supply and Installation of 2m length patch cord. Make:D-Link/Eq. (Data-A15) |
| 771 | Supply and Installation of 24 fiber port 10/100/1000 Mbps layer -3 fully managed switch with 10G uplink including modules and pigtails. Make: D-Link/Eq. (Data–A16) |
| 772 | Supply and Installation of 100 Mbps data for server room with 1 year subscription charges. Make:ACT/Eq. (Data-A17) |
| 773 | Supply and Installation of 8 trunk+20 SIP trunk + 8 digital extension +96 analog extension, expandable up to 896 +400 IP port with 2 KVA UPS. Make:NEC/Eq. (Data-A18) |
| 774 | Supply and Installation of 100 pair MDF Box with Module and Krone. Make:D-Link/Eq. (Data-A19) |
| 775 | Supply and Installation of 50 pair MDF Box with Module and Krone. Make:D-Link/Eq. (Data-A20) |
| 776 | Supply and laying of 0.5mm 10 pair telephone cable in existing pvc pipe on wall and ceiling. Make:D-Link/Eq. (Data-A21) |
| 777 | Supply and laying of 0.5mm 2 pair cable in existing pvc pipe on wall and ceiling. Make:D-Link/Eq. (Data-A22) |
| 778 | Supply and Installation of caller ID telephone instrument. Make:Beetel/Eq. Data-A23) |
| 779 | Supply and Installation of WIFI 7 accesspoint.. make :TP link/Eq. (Data-A24) |
| 780 | Supply and Installation of 150W column speaker with Eight 50 mm(2 in) Full-Range drivers,Frequency Range -80 Hz – 20 kHz,Maximum SPL -Speech mode: 115 dB cont ave (121 peak) and Transformer Taps 60W, 30W, 15W, Built-in 70V/100V transformer. Make:JBL CBT 50 LA-1/Eq. (Data-A25) |
| 781 | Supply and Installation of 240W Power amplifier with 6 mics and 2 aux. Make:Ahuja/Eq. (Data-A26) |
| 782 | Cost of 2 core 1.5 Sq.mm Shielded Copper Speaker Wire Make:orbit/Eq. (Data-A27) |
| 783 | Supply and Installation of 16 channel analog mixer with USB & Phantom. Make:Soundcraft/Eq. (Data-A28) |
| 784 | Supply and Installation of 32 channel Digital mixer with USB & Phantom. Make:MIDAS/Eq. (Data-A29) |
| 785 | Supply and Installation of UHF Wireless handheld microphone with receiver. Make:Shure/Eq. (Data-A30) |
| 786 | Supply and Installation of dynamic Wired microphone with stem and other accessories for podium. Make:Shure/Eq. (Data-A31) |
| 787 | Supply and Installation of 20 KVA Servo Voltage Stabilizer with No Waveform Distortion, Less than 1 sec Stabilization Time, Voltmeter displays output voltage, specifically designed for audio equipment and LED screens. (1 for 4th floor 200 nos conference hall and 5 for 5 nos LED Screens 1for command center). Make:Studiomaster (Data-A32) |
| 788 | Supply and Installation of 5 KVA Servo Voltage Stabilizer with No Waveform Distortion,Less than 1 sec Stabilization Time,Voltmeter displays output voltage,specifically designed for audio equipment. Make:Studiomaster (Data-A33) |
| 789 | Supply and Installation of 40 KVA Servo Voltage Stabilizer with No Waveform Distortion, Less than 1 sec Stabilization Time, Voltmeter displays output voltage, specifically designed for audio equipment for 30 feet X 10 feet LED screens. Make:Studiomaster (Data-A34) |
| 790 | Supply and Installation of 19 inch 22U floor mount rack with necessary accessories. Make:Valrack/Eq. (Data-A35) |
| 791 | Supply and Installation of microphone cable. Make:Belden/Eq. (Data-A36) |
| 792 | Supply and Installation of XLRmale,Female ,Phono and audio jack with soldering works. Make:Belden/Eq. (Data-A37) |
| 793 | Supply and Installation of wireless conference short gun delegate unit with base on/off switch. Make:Ahuja/Eq. (Data-A38) |
| 794 | Supply and Installation of wireless conference short gun chairman unit with base on/off switch Make:Ahuja/Eq. (Data-A39) |
| 795 | Supply and Installation of conference control unit power supplies upto 20 units. Make:Ahuja/Eq. (Data-A40) |
| 796 | Supply and Installation of 1:8 HDMI splitter. Make :Aten/Eq. (Data- A41) |
| 797 | Supply and Installation of 50m 4K High Speed HDMI- HDMI Cable Make:Impression/Eq. (Data- A42) |
| 798 | Supply and Installation of 30m 4K High Speed HDMI- HDMI Cable Make:Impression/Eq. (Data- A43) |
| 799 | Supply and Installation of 5m 4K High Speed HDMI- HDMI Cable Make:Impression/Eq. (Data- A44) |
| 800 | Supply and Installation of Active Video wall P 1.8 LED display, Matrix , contrast ratio > 7000:1 and brightness 900cd/m2 nits, multipicture and graphics and loop power and data cable,seamless display operation. Signage software loaded option, Inputs: DVI-D, Display Port 1.2, HDMI 2.0 (2), HDCP 2.2, Stereo mini Jack, USB including Processor,control card, Software update and licence. Make: Jona/A&T/Eq. (Data A45) |
| 801 | Supply and Installation of 14.5 inch . Display with intelcore i5,14 Gen /RAM 16 GB,DDR4 /Hard drive 512 GB SSD/HD LED / Windows 10 etc. Make:Dell/HP/Eq. (Data-A46) |
| 802 | Supply and Installation of 4X,12X,Optical,5X Digital,Total 60X,Zoom,Professional PTZ VC camera,built in microphone array,speaker tracking. Make :Aver/Eq (Data- A47) |
| 803 | Supply and Installation of 1000W 15 inch powered stage monitor with DSP. Make :EV/Eq. (Data- A48) |
| 804 | Supply and Installation of 1500W 15 inch powered sub woofer with 8 inch top speaker & DSP. Make :EV/Eq. (Data- A49) |
| 805 | Supply and Installation of 98 inch 24 x 7 Signage display. (Press Conference hall-1 nos,War room-1 nos) Make :Sony/Eq. (Data-A50) |
| 806 | Supply and Installation of 86 inch 24 x 7 Signage display. (Press Conference hall-4 nos,War room-4 nos,CM Chamber-1 no) Make :Sony/Eq. (Data-A51) |
| 807 | Supply and Installation of 75 inch 24 x 7 Signage display.(Minister Room,CRA room,Commissioner Room and vvip rooms) Make :Sony/Eq. (Data-A52) |
| 808 | Supply and laying of 6 core indoor OFC cables in existing pvc pipe on wall and ceiling. Make:D-Link/Eq. (Data-A53) |
| 809 | Supply and Installation of tata sky recharge and other necessary accessories. Make :Tata Sky /Eq. (Data-A54) |
| 810 | Supply and Installation of high end 4K LED Video wall processor. Make :Novastar/Eq.(Data-A55) |
| 811 | Supply and Installation of RG 0.6 Co axial cable in existing PVC Pipe on wall and ceiling. Make : Honeywell/Eq. (Data-A56) |
| 812 | Supply and Installation of RJ 11 I/os with face plate and back box for Intercom. Make:D-Link/Eq. (Data-A57) |
| 813 | Supply and installation of Live Production switcher with 10 standards converted 3G SDI inputs and 6 independent 3G SDI aux outputs! It also includes a USB webcam output, DVE, chroma keyers, media players, 16-way Multiview, built-in Fairlight audio mixer. Make:Black Magic/Eq. model No:ATEM Mini1 M/E (Data-A58) |
| 814 | Supply and Installation of Shoulder-Mount Professional Video Camera PXW Z-300,Tripod stand,128 GB Memory card,card reader,Battery-3nos,battery charger,bag,Video capture card,wireless hdmi transmitter charger including 2 nos battery,Wreless hdmi transmitter and receiver and other necessary cables and connectors. Make:SONY/Eq. (Data- A59) |
| 815 | Testing and Commissioning of CCTV,LAN,Intercom,PA system,RG 06 cables,DTH recharge for one year,media converter and LED TV. |
| 816 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysDec 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender