Tender For Repairing Of Five Nos Conveyor Pulleys Pcc-36A, Pcc-58A, Pcc-50A, Pcc-51A And Pcc-59A Of Different Sizes And Two Nos Conveyor Drums Pcc-128 And Pcc-112 Of Mic Jhanjra Project Colliery
Tender Value
5.58 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
5 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing Of Five Nos Conveyor Pulleys Pcc-36A, Pcc-58A, Pcc-50A, Pcc-51A And Pcc-59A Of Different Sizes And Two Nos Conveyor Drums Pcc-128 And Pcc-112 Of Mic Jhanjra Project Colliery
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of PCC-50A & 51A |
| 2 | Welding Rod of ESAB make duroid 250(4mm) 5 Packets |
| 3 | DA & Oxygen and Grease 10 Kgs |
| 4 | Labour Cost for dismantling,welding,Gas cutting,Preheating,Grinding,Machining,02 Nos,New keyway making through slot cutting in both side boss and again assembling complete Drum |
| 5 | Checking Static balancing of the Drum and making it proper after necessary fabrication |
| 6 | Colour painting in complete Drum for making rust proof |
| 7 | Repairing of PCC-59A |
| 8 | DA & Oxygen for Preheating |
| 9 | Dismantling Charges |
| 10 | Making of new shell cost; of Raw material of 16mm thick MS Plate rough weight; dia 600mmx1400mm long |
| 11 | MS Plate Bending |
| 12 | welding of above mentioned MS plate |
| 13 | Machining of above mentioned MS Plate for making new shell as in desired shape and size |
| 14 | fitting of complete Drum set including side plates,boss |
| 15 | checking Static balancing of the Drum and making it proper after necessary fabrication |
| 16 | painting of complete drum by oil Paint for making of rust proof |
| 17 | Repairing of PCC-36A |
| 18 | DA & Oxygen for Preheating |
| 19 | Dismantling Charges |
| 20 | cutting both side flanges & Boss(hub) by DA & Oxygen gas |
| 21 | Making of new flanges of Raw Material (Mild Steel)for making both side ne flanges ,rough Weight:se 500 mm dia&18mm thick plate including 10% as machining allowance |
| 22 | plate welding (flange both side)by groove cutting |
| 23 | Machining and rectification of 2 Nos boss after removing old side plates |
| 24 | Making of new stiffness: making 08 Nos new stiffness odf size 180mmx140mmx16mm by raw material M.S plates including 10% as cutting and machining allowance |
| 25 | Fitting of complete drum set including side plates,boss along with 08 nos stiffness |
| 26 | checking static balancing of the drum and making it proper after necessary fabrication |
| 27 | painting of complete drum by oil paint for making of rust proof |
| 28 | Repairing of PCC-58A |
| 29 | Raw Materials (EN24 Forged) for Drum shaft 130mm Diax1800mm Long |
| 30 | Annealing |
| 31 | Charges for machining of the complete drum shaft to the finished size |
| 32 | Heat Treatment |
| 33 | Dismantling of old broken shaft by hydraulic pressure |
| 34 | checking static balancing of the drum and making it proper after necessary fabrication |
| 35 | colour painting in complete Drum |
| 36 | Repairing of PCC-128 & PCC-111 |
| 37 | PCC 128,Making of New shell supply of raw matrial of 20mm thick M.S Plate rough weight;Dia 400mmx1600mm long |
| 38 | Supply of M.S Plate Bending |
| 39 | Supply of Welding rod of EASAB make Durodi (4mm) |
| 40 | Supply of DA & Oxygen |
| 41 | Supply of Welding of above mentioned M.S Plate |
| 42 | Supply of Machining of above mentioned M.S Plate for making new shell as in desired shape and size |
| 43 | Making of New stiffness;supply of making 08Nos,new stiffness of size 180mmx140mmx16mm by Raw material M.S Plates including 10% cutting and machining allowances |
| 44 | Labour supply for dismantling,welding,gas cutting,preheating,grinding,machining,new keyway making through slot cutting in both side boss machining complete drum |
| 45 | Supply of checking static balancing of the drum and making it proper after necessary fabrication |
| 46 | Supply of painting of complete drum by oil Paint for making of rust proof |
| 47 | PCC 111,Making of New shell;supply of raw material of 20mm thick M.S Plate rough weight;Dia-800mmx1400mm Long. |
| 48 | Supply of M.S Plate Bending |
| 49 | Supply of welding rod of ESAB Make duroid 250/4mm |
| 50 | Supply of DA & Oxygen |
| 51 | Supply of welding of above mentioned M.S Plate |
| 52 | Supply of machining of above mentioned M.S Plate for making new shell as in desired shape and size |
| 53 | Labour supply for dismantling,welding,gas Cutting,preheating,grinding,machining,02 Nos.new keyway making through slot cutting in both side boss and again assembling complete drum |
| 54 | supply of checking Static balancing of the Drum and making it proper after necessary fabrication |
| 55 | Supply of painting of complete drum by oil Paint for making of rust proof |
| 56 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender