Tender For Stop Gap Arrangement For Day To Day Comprehensive annual maintenance contract Of Basundhara Area For 150 Days.
Tender Value
2.18 Crore
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
2.72 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stop Gap Arrangement For Day To Day Comprehensive annual maintenance contract Of Basundhara Area For 150 Days.
BOQ
| Sl. No. | Item Description |
| 1 | Upkeeping of residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. all complete as per the direction of EIC.(i) A Type Quarter |
| 2 | Upkeeping of residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. all complete as per the direction of EIC.(ii) B Type Quarter |
| 3 | Upkeeping of residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. all complete as per the direction of EIC.(iii) C Type Quarter |
| 4 | Upkeeping of residential quarters in the township including cleaning of bathrooms, staircase, courtyard, garage, parking space, premises and surrounding areas including collection of garbage and disposal to the dustbins by engaging sufficient numbers of manpower including cost of all necessary tools and supervision charges etc. all complete as per the direction of EIC.(iii) D Type Quarter |
| 5 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge. |
| 6 | Upkeeping of concrete pavement/ Black topped roads excluding coal transport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge. |
| 7 | Cleaning of drains including removal of earth/ slush/ mud/ silt etc. from drains including disposal of the same within a lead of 50 metres. |
| 8 | Up keeping of inside office/ service / welfare buildings including: a) Cleaning of floors by brooming and mopping, walls ceiling, partitions, chairs, tables, almirahs, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. once in a day in the office building daily in all working days. (b) Cleaning of bathroom / toilets once in a day with water, detergent, phenyl etc. daily in working days inclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In- Charge.(Note - Excluding Hospital) |
| 9 | Up keeping of inside office/ service / welfare buildings including: a) Cleaning of floors by brooming and mopping, walls ceiling, partitions, chairs, tables, almirahs, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. once in a day in the office building daily in all working days. (b) Cleaning of bathroom / toilets once in a day with water, detergent, phenyl etc. daily in working days inclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In- Charge.Note - Hospital Only(Cleaning required in 3 shift in a day) |
| 10 | Cleaning and brooming of floor areas like chequered tiles, paver block, IPS floors, including applying water, detergents etc adequately all complete as per the direction of Engineer-In-Charge.Charge. |
| 11 | Maintenance of lawn, garden, flower beds, potted plants, plants and trees, planting of new plants / new lawns as and where required including watering, removal of weeds, wild vegetation etc, manuring, putting good earth, fertilisers, applying pesticides at various locations etc. as per the direction of Engineer-In-Charge. (Cost of plants, manure, good earth, etc. to be paid for separately. However, cost of tools & plants, flexible pipes, fertilisers and insecticide / pesticides are included in the item and is to be arranged by the contractor. The water supply point shall be provided at one point at each separate location by the department.). NOTE: The payment to the workmen shall be made through any nationalised bank. |
| 12 | Disposal of dead animals like cow,ox,buffalow etc. as an when required including digginhg of pits and buring the same as per instrution of engineer in charge |
| 13 | Collection of garbage from different places of Colony and disposal of the same at a suitable place as earmarked by Municipality/local authorities by suitable mechanical arrangement (Tractor) including loading, unloading etc. Complete with all leads as per instruction of Engineer-in-Charge. (Tractor of 3.00 Cum capacity to be engaged at least twice in a week and no garbage shall be dumped in colony premises. Tractor trip in colony premises should be duly authenticated by concerned TA authorities. Garbage shall be covered properly and tied in order to avoid any slippage during transit). Note: Hire charge of tractor is inclusive of lead of 10 KM. The lead may vary as per the requirement. |
| 14 | Supply of Detergent as per direction of EIC |
| 15 | Supply and providing of black phenyl (BENGAL CHEMICAL Lamp brand) or its equivalent approved brand in sealed container of 450 ml capacity as per direction of Engineer-in-charge. |
| 16 | Supplying and providing Soap based multi-use cleanser and deodorant (BENGAL CIIEMICALS tiger brand white phenyl or its equivalent approved brand) in sealed container(s) of 500ml capacity and distributing the same toall residential quarter(s) and service building(s) as directed by Engineer-in- |
| 17 | Supplying and providing harpic solution or its equivalent approved brand for cleaning of toiletes as and when required basis as directed by Engineerin- Charge. (500 ml bottle) |
| 18 | Supply of air freshners(odonil or equivalent) as per direction of EIC |
| 19 | Supply of Napthalene Ball as per direction of EIC |
| 20 | Providing Bleaching power as per directions of the Engineer-in-Charge. |
| 21 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 22 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqmon plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil |
| 23 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating anddressing complete. |
| 24 | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 25 | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 26 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 27 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 28 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 29 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 31 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 32 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.complete.40 mm thick with 20 mm nominal size stone aggregate |
| 33 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacture of SOMANY or other approved makeapproved make in all colours, shades except burgundy,bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(300x600mm wall tiles) |
| 34 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approvedmake in colours such asWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 35 | Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigmentsetc., complete.Size of Tile 600x600 mm |
| 36 | Providing and fixing 15 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of WIDE/MEDIUM/THICK GRAIN(Area of slab over 0.50 sqm) |
| 37 | Providing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 38 | Providing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 39 | Providing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 300x16 mm |
| 40 | Providing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 250x16 mm |
| 41 | Providing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 150x10 mm |
| 42 | Providing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 43 | Providing BWR plywood of approved quality 19 mm thick as per instruction of Engineer-in-charge. |
| 44 | Providing BWR plywood of approved quality 12 mm thick as per instruction of Engineer-in-charge. |
| 45 | Providing 1 mm thick laminate of approved quality as per instruction of Engineer-in-Charge. (8'x4') |
| 46 | Removing of damage glass panes & providing and fixing black /brown glass panes in door /window with sliding glass runner, rubber and necessary screws fitting as per instruction of Engineer-Charge. |
| 47 | Providing to existing door frames.30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30mm and wall thickness 2mm(± 0.2mm), with inbuilt decorativemoulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30mmand 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. `U' cleats. The shutter frame filled with a uPVC multi- chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-incharge. |
| 48 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermalexpansion, (i) Single socketed pipes. 110 mm diameter |
| 50 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conformingto IS :5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conformingto IS :5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conformingto IS :5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 53 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes screwed with M.S. screws of required length etc. complete. 75 mm |
| 54 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes screwed with M.S. screws of required length etc. complete. 110 mm |
| 55 | 12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand) |
| 56 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 57 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 58 | Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 59 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 60 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work |
| 61 | White washing with lime to give an even shade: Old work (two or more coats) |
| 62 | Colour washing such as green, blue or buf to give an even shade: New work (two or more coats) with a base coat of white washing with lime |
| 63 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 64 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 65 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 66 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement motar |
| 67 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 68 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet |
| 69 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 70 | Providing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 71 | Providing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good thewalls wherever required : |
| 72 | Providing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm as per direction of EIC |
| 73 | Providing white vitreous china pedestal type (European type/ wash down type) water closet pan as per direction of EIC |
| 74 | Providing Flushing Cistern P.V.C. 10 litre capacity (low level-White) with fittings, accessories and flush pipe as per direction of EIC |
| 75 | Providing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid as per direction of EIC |
| 76 | Providing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia as per direction of EIC |
| 77 | Providing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 78 | Providing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 79 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia |
| 81 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia |
| 82 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal dia |
| 83 | Providing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 84 | Providing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 85 | Providing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 86 | Providing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 87 | Providing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 88 | Providing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia |
| 89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support for tank. |
| 90 | Providing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 91 | Day to day maintenance of plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. |
| 92 | Extra charge for Day to day maintenance of plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. (For Colonies with more than 600 Quarters or for very old colonies with 500 quarters) Note: For sundays and holidays |
| 93 | Day to day maintenance of carpentry works by engaging one skilled carpenter and one unskilled Helper as per direction of EIC |
| 94 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately)110 mm diameter (Type B) |
| 95 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately) 160 mm diameter (Type B) |
| 96 | Providing SS wire mesh jali for doors and windows of 22 gauge 18 mesh per sq inch as per instruction of of Engineer-in-charge. Grade 304 |
| 97 | Providing and fixing 15 mm CP brass pillar tap of approved quality by(PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 98 | Providing C.P. towel rod size 600x20mm with C.P. brass screws to be approved by Engineer-in-Charge (PLAZAbrand or equivalent) as per instruction of Engineer-in charge. |
| 99 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 100 | Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge. |
| 101 | Providing C.P. shower rose with arm (Plaza brand or equivalent) of approved quality complete as perinstruction of Engineer-in-Charge. with 15 rnm or 20 mm inlet 100 mm diameter |
| 102 | Providing C.P. soap dish (Balaji brand or equivalent) as per instruction of Engineer-in-charge |
| 103 | Providing and fixing CP Health Faucet with CP Tube & Hook set and Bib cock two in one quater turn of Jaquar make or approved equivalent quality complete set i/c cost of labour and materials complete as per instruction ofEIC. |
| 104 | Providing PVC VALVE 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 105 | Providing PVC VALVE 32mm dia of approved quality as per instruction of Engineer-in-charge |
| 106 | Providing PVC VALVE 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 107 | |Providing PVC VALVE 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 108 | Providing of fixing Wall Mixture 3 in 1 Quarter turn having Hand Shower 100mm dia incld Hand shower Cord/Tube flexible with Bracket/ Hook for Hand Shower of Jaquar make or approved equivalent quality etc completeas per instruction of EIC. |
| 109 | Providing of fixing Single lever Basin mixture Quarter turn of Jaquar make or approved equivalent quality etc complete as per instruction of EIC. |
| 110 | Providing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 111 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherevernecessary complete:25 mm dia |
| 112 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. of approved make as per instruction of EIC(the tail pieces will be paid separately): 80mm diameter Class II |
| 113 | Operation of valves of water supply distribution system of colony & other sevice buildings as per the direction of EIC( Deployment of manpower:- 3 valve operator in 1st shift & 2 valve operator in 2nd & 1 valve operator in3rd shift each ) |
| 114 | Labour charges for day to day maintenance works related with welding works like welding of hinges, welding of flats in window grills and other petty jobs related with welding works as and when required by deploying welder beldar/coolie in residential quarters of colony. (welding rod and electricity is to be provided by the department) as per instruction of Engineer-in-charge. (1 Skilled and 1 unskilled worker per day) |
| 115 | Labour charges including tools and plants for day to day maintenance work like brick work, plastering, flooring and other petty jobs as and when required on daily basis by deploying masons. Beldar /coolie in residential quarters of Colony (Materials to be used in this item are to be paid separately) as per instruction of Engineer-in-charge. (2 Skilled and 2unskilled worker per day) |
| 116 | Providing welding rod as per instruction of of Engineer-in-charge. |
| 117 | Providing solvent cement of 100 gm in suitable container for jointing PVC pipes of approved make as per direction of EIC |
| 118 | Providing and fixing of 150 mm G.I pipes complete with G.I fittings including trenching & refilling(External work) all complete as per instruction of the EIC. |
| 119 | Providing and fixing 150mm dia G.I flange of approved quality as per instruction of EIC |
| 120 | Providing at site of gland packing of approved quality for valve as per instruction of EIC |
| 121 | Deployment of two nos unskilled manpower for cleaning of toilet, room, chhajas , roof and surrounding area for newly alloted quarters including the cost of tools and materials required for cleaning as per instruction of theEIC. |
| 122 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender