Tender For Providing And Making Necessary Civil, Plumbing, Gas Pipeline And Allied Works For Establishment Of Physics, Chemistry And Biology Laboratories At Kendriya Vidyalaya, Iit Ropar
Tender Overview
Project Description
Tender for Providing And Making Necessary Civil, Plumbing, Gas Pipeline And Allied Works For Establishment Of Physics, Chemistry And Biology Laboratories At Kendriya Vidyalaya, Iit Ropar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Nov-2026 | Corrigendum 1 | Technical Bid | 19-Nov-2026 |
| 2 | 19-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Nov-2026 |
| 3 | 18-Nov-2026 | Corrigendum 1 | Technical Bid | 26-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. |
| 3 | All kind of soil |
| 4 | Concrete work |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level |
| 6 | 1:5:10 (1 cement: 5 fine sand derived from natural sources: 10 graded stone aggregate 40mm nominal size derived from natural sources) |
| 7 | Reinforced cement concrete |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level |
| 9 | 1:1.5:3 (1 cement: 1.5 course sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 13 | Steel reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete above plinth level |
| 14 | Thermo-Mechanically Treated bars of grade Re-500D or more |
| 15 | Masonry work |
| 16 | Brick work with common brunt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shape and sized in: |
| 17 | Cement mortar 1:6 (1 cement: 6 course sand) |
| 18 | Steel work |
| 19 | Steel work in built up tubular (round, sheet, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 20 | Hot finished welded type tubes |
| 21 | Flooring |
| 22 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 23 | 40 mm thick with 20 mm nominal size stone aggregate |
| 24 | Finishing |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 26 | Two or more coats on new work |
| 27 | CEMENT PLASTER (IN FINE SAND) |
| 28 | 12 mm cement plaster of mix : |
| 29 | 1:6 (1 cement: 6 fine sand) |
| 30 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 32 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 33 | Dismantling & Demolishing |
| 34 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 35 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 36 | In cement mortar |
| 37 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 38 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 39 | Road work |
| 40 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 41 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) |
| 42 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 43 | 0mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 44 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 45 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 46 | 15 mm dia nominal bore |
| 47 | 20 mm dia nominal bore |
| 48 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 49 | Kitchen sink with drain board |
| 50 | 510x1040 mm bowl depth 250 mm |
| 51 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 52 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 53 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 54 | Providing and fixing 50 mm nominal diameter unplasticised rigid PVC pipe of approved quality, conforming to relevant IS standards, including all necessary PVC fittings such as bends, tees, sockets, unions, reducers, clamps, supports and other accessories, jointing with approved solvent cement/rubber ring as applicable, cutting, making connections, testing for leakage and proper functioning, complete in all respects as required and as directed by the Engineer-in-Charge |
| 55 | Providing and fixing 100 mm nominal diameter unplasticised rigid PVC pipe of approved quality, conforming to relevant IS standards, including all necessary PVC fittings such as bends, tees, sockets, unions, reducers, clamps, supports and other accessories, jointing with approved solvent cement/rubber ring as applicable, cutting, making connections, testing for leakage and proper functioning, complete in all respects as required and as directed by the Engineer-in-Charge. |
| 56 | Providing and making necessary cutting/chasing in existing granite/Kota stone/tiled flooring, of width ranging from 50 mm to 100 mm and depth ranging from 50 mm to 100 mm, as required for laying of GI pipe, including careful cutting with suitable cutting tools, removal of the cut portion, lifting and disposal of malba/debris, cleaning of the cut area and removal of dust and loose material, and after laying of GI pipe, refixing/reinstating the removed granite/Kota stone/tiles with suitable adhesive/mortar, matching the existing flooring in colour, pattern, level and finish, complete in all respects as required and as directed by the Engineer-in-Charge. The cost of GI pipe and its laying shall be paid separately under the respective item. |
| 57 | Providing and fixing 25 mm nominal bore G.I. pipe for laboratory gas supply, including all necessary G.I. fittings such as sockets, elbows, tees, unions, reducers, nipples and other required accessories, cutting and chasing of existing flooring/wall of required width and depth for laying of the pipe, removal and stacking of dismantled Kota stone/granite/tiles, laying and jointing of G.I. gas pipe with all necessary fittings, applying one coat of approved primer and two coats of approved synthetic enamel paint of approved colour over the exposed G.I. pipe surface, including preparation of surface by cleaning and removing dust, grease and loose material, testing of the complete gas pipeline for leakage and proper functioning, and thereafter refixing/reinstating the dismantled Kota stone/granite/tiles with suitable cement mortar/adhesive, matching the existing flooring/wall in colour, pattern, level and finish, including filling of joints, grouting, cleaning of the work area and removal of malba/debris, complete in all respects as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender