Tender For State Border To Savalde, Karit, Ranala, Shanoumandal, Chadvel, Brahmanvel, Dahiwel Upto Pimpalner And From Chandwad, To Lasalgaon, Vinchur Upto Bharvas And From Morvis Upto Savali Vihir (Improvement To Prakasha Chhadvel Dahivel Samode Raod
Tender Overview
Project Description
Tender for State Border To Savalde, Karit, Ranala, Shanoumandal, Chadvel, Brahmanvel, Dahiwel Upto Pimpalner And From Chandwad, To Lasalgaon, Vinchur Upto Bharvas And From Morvis Upto Savali Vihir (Improvement To Prakasha Chhadvel Dahivel Samode Raod Sh-7 Km.80/00 To 81/200 And 90/00 To 92/00 Tal.Sakri Dist.Dhule)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 2 | Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density Etcetera complete (Material obtained from departmental Land) |
| 3 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre, not less than 97 % of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with vibratory roller. |
| 4 | Dismantling of existing Black Top Surface (flexible Pavement) to a depth of 50 milimetre manually including loading of dismantled material to transport vehicle at site excluding lead charges. |
| 5 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. |
| 6 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50 metre to 300 metre inclusive from the site of excavation to the site of deposition as directed. |
| 7 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material |
| 8 | Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate (natural sand/ Verticle Shaft Impactor grade finely washed crushed sand) conforming to Indian Standards: 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kilogramme per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetra complete. with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. |
| 9 | Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to Indian Standards 3395 : 1997 below concrete pavement including all materials and labour complete. |
| 10 | Providing and laying in-situ Mix-40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand/ Verticle Shaft Impactor grade finely washed crushed sand) conforming to Indian Standards 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @ 0.6 metre X 0.6 metre centre to centre, admeasuring 80 milimetre at bottom and 40 milimetre at top with depth of 75 milimetre and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. |
| 11 | Providing and fixing in position Thermo Mechanical Treated FE 500, 32 milimetre dia dowel bars precoated with anticorrosive epoxy paint of required diametre 60 centimeters Long and at 30.00 centimetre Center to Center and wherever directed including handling, straightening, necessary cutting supported by Thermo Mechanical Treated FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed Etcetera complete. |
| 12 | Providing and fixing in position Thermo Mechanical Treated FE 500, tie bars precoated with anticorrosive epoxy paint of 12 milimetre diametre 70 centimetres long and at 30.00 centimetre Center to Center and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of Thermo Mechanical Treated FE 500, chairs with proper alignment Etcetera complete. |
| 13 | Cutting transverse contraction joints 3 to 4 milimetre wide and depth 60 milimetre in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab Etcetera complete including subsequent widening of the groove 8 to 10 milimetre wide at top having depth of 15 milimetre as directed by Engineer incharge. |
| 14 | Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 milimetre to 4 milimetre joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent Indian Standards applied and applying primer. (A) Contraction and longitudinal joints (15 milimetre deep x 8 milimetre wide) |
| 15 | Providing and constructing 50 milimetre thick Modified Penetration Macadam road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75 kilogramme per square metre, spreading 12 milimetre size chips compacting with Static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etcetra complete, including applying tack coat of bitumen 0f specified grade at the rate of 0.30 Kilogramme Square metre (on existing bitumen surface.) |
| 16 | BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with Vehicle Tracking System, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 50 milimetre compacted thickness with drum mix type hot mix plant with Supervisory Control and Data Acquisition having complying essential features of Hot mix plant as per Indian Road Congress-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and Programmable logic controller for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etcetra complete --Bitumen 3.30% of specified grade (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 17 | BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 40 milimetre compacted thickness with drum mix plant with Supervisory Control and Data Acquisition, Sensor paver and Vibratory roller excluding prime/Tack coat etcetra complete --Bitumen of specified grade with stone dust filler. (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 18 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on Black Top surface 2.5 kilogramme per 10 square metre (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 19 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 20 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. |
| 21 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering Etcetera complete. |
| 22 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 milimetre thick including 1.5 Refractive index reflectorizing glass beads @ 250 gramme per square metre Thickness of 2.5 milimetre is exclusive of surface applied glass beads as per Indian Roads Congress 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL and QD both according to Indian Roads Congress 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for Indian Roads Congress 35:2015). |
| 23 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed Etcetera complete. ( By /manaual Means ) a) Upto 1.50 metre lift Normal Rate |
| 24 | Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed Etcetera complete. a) Upto 1.50 metre lift Normal Rate |
| 25 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting Etcetera complete. |
| 26 | Providing and laying in situ / ready mix / ready mix Mix-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing Etcetera complete. (with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) |
| 27 | Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drain work / retaining walls Etcetera including necessary form work, compaction, finishing and curing Etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Supervisory Control and Data Acquisition |
| 28 | Providing and laying weep holes of 100 milimetre diameter Polynvinyl Cloride pipes as per drawing for abutment returns, return walls Etcetera Complete. |
| 29 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap/ granite /quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetra complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 30 | Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanical Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings Etcetera complete. |
| 31 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 milimetre made out of 1.5 milimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Roads Congress:67-2012 Table No 8.3 Supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with grey stove enamel paint and supported on one number of Mild Steel angle iron post of size 65 milimetre X 65 milimetre X 6 milimetre, 3.45 metre long, duly painted with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etcetra fixing the boards in Mix-25 grade concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including transportation etcetra complete. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 32 | White washing two coats on parapet walls and white washing and geru lime painting to tree trunks including preparation of surface by cleaning scraping Etcetera complete |
| 33 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols Etcetera with approved colour shade paint complete, on Mild Steel angle of size 35 x 35 x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x35 milimetre x3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour Etcetera complete. |
| 34 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogramme tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 milimetre, 100 milimetre and 102 +/- 2 milimetre and with minimum reflective area of 13 Square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 milimetre and height not less than 30+/- 2 milimetre) from the body is to be a minimum value of 500 Kilogramme Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 35 | Providing and fixing steel pipe delineators of 10 centimetre in diameter and total height of 130 centimetre, provided with 2 strips of white retroreflective sheeting of size 5 centimetre x 32.5 centimetre each fixed horizontally and 2 strips of red retroreflective sheeting each having size 5 centimetre x 32.5 centimetre fixed horizontally at top, with Mild Steel round cap having diameter 11 centimetre and wire mesh at top (10 guage thick) and height of wire mesh 15 centimetre, Mild Steel hold fast 6 milimetre thick with 35 centimetre in length, fixing the delineators in Cement Concrete 1:4:8 concrete block of size 25 centimetre x 25 centimetre x 45 centimetre with necessary excavation etcetra complete. |
| 36 | Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W metal beam crash barrier comprising of 3 milimetre thick corrugated sheet metal beam rail, 70 centimetre above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 milimetre spaced 2 metre centre to centre, 1.8 metre high, 1.1 metre below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to Indian Standards:1367 and Indian Standards:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 milimetre, 330 milimetre long complete as per clause 810) |
| 37 | Providing and fixing road junction/ information sign boards of size 1.80 x 0.90 Meter Prepared 16 guage Alluminium sheet on frame of size 35 x 35 x 5 milimetre with cross bracing of size 35x35x5 milimetre including bonded with Indian Roads Congress Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, Indian Roads Congress Specified colour retro reflective cutout border and messages having pressure sensitive adhesive having border and messages in Indian Roads Congress Specified colour background including two angle iron post of size 65 x 65 x 6 milimetre of 3.65 metre long inflated at bottom drilled on top and painted in whiteand black bands of 30 centimetre with 4 Numbers high strength Galvanised Iron bolts and nuts of size 10 milimetre diametre and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 cm size as directed by Engineer-in- charge Etcetera complete. Alluminium sheet Type IV High Intensity Micro-Prismatic Grade Sheeting. |
| 38 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 milimetre diametre made out of 1.5 milimetre aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Roads Congress :67-2012 Table No 8.3 Supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with grey stove enamel paint and supported on one number of Mild Steel angle iron post of size 65 milimetre X 65 milimetre X 6 milimetre, 3.45 metre long, duly painted with with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etc; fixing the boards in Mix-25 grade concrete block of size 60 centimetre X 60 centimetre X centimetre cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 39 | Providing and fixing Reinforced Cement Concrete 200 metre stones as per Indian Roads Congress standard including fixing in standard size Cement Concrete 1:4:8 block including curing, painting lettering Etcetera complete. |
| 40 | Providing and fixing 1:2:4 ordinary kilometre as per Indian Roads Congress standard including fixing in standard size Cement Concrete 1:4:8 block including curing, painting lettering Etcetera complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender