Tender For Road Safety Works At The Kali Nadi Bridge, Located At Km-5 Of Via Saidpur Road M.B Road To Ginaura Sheikh
Tender Value
3.90 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
4 days left
EMD
39000
Bank guarantee accepted
Document Fee
767
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Works At The Kali Nadi Bridge, Located At Km-5 Of Via Saidpur Road M.B Road To Ginaura Sheikh
BOQ
| Sl. No. | Item Description |
| 1 | Provinding & laying of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 15 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes.including supply of all material, Labour, T&P all taxes royalty, labour cess etc, required for proper completion of work as per direction by the Engineer In charge.But Exc GST. |
| 2 | Providing & laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform & free from streaks and holes.including supply of all material, Labour, T&P all taxes royalty, labour cess etc, required for proper completion of work as per direction by the Engineer In charge.But Exc GST. |
| 3 | Supply & fixing of raised pavement marker(Cat Eye/Road stud) with Made of Plastic body of RPM/Road Stud shall be moolded from ASA (Acrylic Styrne Acrylonitrite) or HIPS(High Impact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer.The marker shall support a load of 13.635 kg tested in accordance with ASTM D4280.The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face,lenses shall be mouled of meithyl methecrylate confirming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base & the area of each retro-reflecting surface shall not be less than 13.00 sq.cm the marker height shall not be less than 10 mm & shall not exceed 20 mm & Width shall not exceed 130 mm.The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations,excess adhesive around the edge of the marker excess adhesive on the pavement & adhesive on the exposed surface of the marker shall be immediately removed.The Contractor shall submit a 2 year warranty for satisfactory field performance including stipulated retro-eflecting panel,to the Engineer in addtion a 2year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers,in case the markers are displaced,damaged, get worn out or lose their reflectivity compared to stipulated standard the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer at his own cost.The rate shall include all material,labour, T&P, transportation,installation & incidentals all complete as per direction of the Engineer-in-charge.including supply of all material, Labour, T&P all taxes royalty, labour cess etc, required for proper completion of work as per direction by the Engineer In charge.But Exc GST. |
| 4 | Providing & fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3,fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection,daytime colour & luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss & fungus resistance, 3 years outdoor weathering & its having passed these tests shall be obtained from International /Government Laboratory /Institute by the manufacturer of the sheeting & in case the certificate is obtained from international condition,it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally.In such a situation,the Employer /Client, if so desires,could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012.Legends, letters, numerals & borders etc should be as per MoRTH specification No-801.3.7 . P xi) including supply of all material, Labour, T&P all taxes royalty, labour cess etc, required for proper completion of work as per direction by the Engineer In charge.But Exc GST.45x90 cm (Left/Right) Object Hazard |
| 5 | Providing & fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3,fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection,daytime colour & luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss & fungus resistance, 3 years outdoor weathering & its having passed these tests shall be obtained from International /Government Laboratory /Institute by the manufacturer of the sheeting & in case the certificate is obtained from international condition,it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally.In such a situation,the Employer /Client, if so desires,could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012.Legends, letters, numerals & borders etc should be as per MoRTH specification No-801.3.7 . P xi) including supply of all material, Labour, T&P all taxes royalty, labour cess etc, required for proper completion of work as per direction by the Engineer In charge.But Exc GST.60 cm Circular with diffinitation plate (20cm x 60cm) Speed Limit |
| 6 | Providing & fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3,fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection,daytime colour & luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss & fungus resistance, 3 years outdoor weathering & its having passed these tests shall be obtained from International /Government Laboratory /Institute by the manufacturer of the sheeting & in case the certificate is obtained from international condition,it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally.In such a situation,the Employer /Client, if so desires,could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012.Legends, letters, numerals & borders etc should be as per MoRTH specification No-801.3.7 . P xi) including supply of all material, Labour, T&P all taxes royalty, labour cess etc, required for proper completion of work as per direction by the Engineer In charge.But Exc GST.90 cm Equilateral triangle with definition plate size (20 cmsx 60 cms) Speed table Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender