Tender For Construction Of Plain Cement Concrete Road And Boundary Wall To Reach Bada Jamuwa Aganbadi Center No 3 ,,Panchayat- Damkara Barwa, Block- Govindpur, Dist- Dhanbad
Tender Value
50.16 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Plain Cement Concrete Road And Boundary Wall To Reach Bada Jamuwa Aganbadi Center No 3 ,,Panchayat- Damkara Barwa, Block- Govindpur, Dist- Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5.10.2 |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.5.1.1 BCD |
| 3 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) 5.1.2 BCD |
| 4 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grading - I complete as per the dir ection of Engineer-in-charge. (4.01B (i)RCD |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) 5.3.1.1 BCD |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 5.3.17.1 BCD |
| 7 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. 5.1.8 |
| 8 | E/W excavation in foundation trenches in Ordinaty and hard soil (Vide classification of soil item-A) and disposal of excavated earth so obtained to a distance upto 50 M and average lift of 1.5 M including levelling, ramming the foundation trenches removing the roots or shrubs etc. all complete as per specification and direction of E/I. 7.1.27 |
| 9 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) 7.1.10 |
| 10 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials , labour, royality and taxes all complete as per building specification and direction of E/I. 5.1.10 bcd |
| 11 | Labour charges for pitching on apron slope of bank with stone boulders duly packed (uncrated) complete job (materials within 150M and all lifts as per specification and direction of E/I.I. (7.7.18 ) |
| 12 | Stone boulder of size 150 mm and below at quarry ( M- 016 pg 80 Part A) |
| 13 | Providing and laying in position cement concrete (1:2:4) of specified grade stone aggregrate 20 mm nominal size all complete job as per specification and direction of E/I. 5.3.1.2 |
| 14 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.2 |
| 15 | Provinding 1.5mm thick neat cement punning …. Do..taxes and royalty all complete as per building specification and direction of E/I. 3.11 part A |
| 16 | Providing randam rubble stone masonry in CM (1:4) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.. 5.2.28 |
| 17 | Providing randam rubble stone masonry in CM (1:4) in superstructureincluding cost of screening of materials scaffolding raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.. 5.2.31 |
| 18 | Providing weephole with dry graded stone filter 20 mm to 40 mm size in abutment and wing wall as per specification and direction E/I. (6.9 Part - A) 6.7.6 |
| 19 | Providing 25mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.12 |
| 20 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. 9.01B(i) |
| 21 | Supplying and laying (properly as per design and drawing) rip-rap with 'good quality of boulders duly packed including the cost of materials, royalty all taxes etc. but excluding the cost of carriage all complete as per specificati n and direction of E/I. 5.6.8 |
| 22 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including 9.03 |
| 23 | Plain/ Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications .RCC Grade M20 using batching plant , transit mixer & manual placing 9.06 c |
| 24 | Supplying ,Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications , 9.07 |
| 25 | Providing designation 75- B, Brick Flat Soling joints filled with local sand including cost of watering, taxes and royalty all complete as per building specification and direction of E/I (5.6.3) |
| 26 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (5.3.9.1) |
| 27 | Providing designation 75- B, brick work CM (1:6) IN Foundation and plinth with approved quality of clean coarse sand of F.M 2 TWO 2.5 Including providing 10 mm thick mortar joint , cost of screening material ,racking out joints 15 depth , curing ,taxes and royalties all comp. as per Specification and Direction of E/I.BCD |
| 28 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) 5.3.10 |
| 29 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. 5.2.52 |
| 30 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).5.3.11 |
| 31 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)5.1.7 |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts 5.3.17.6 |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick. 5.3.17.21 |
| 34 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) 5.5.4 |
| 35 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}5.5.5a |
| 36 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) 5.5.5 b |
| 37 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.3 |
| 38 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of requiredshade:13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat ofexterior primer applied @ 0.90 litre/10 sqm) 13.47.1 dsr |
| 39 | Supply of vertical post 75 x 75 x 6 (gr.) (B.C.D. - P - 43,, Sl. - 158, M - 195 b(iii)) |
| 40 | Labour for febricating erection hoisting and fixing in position structural steel work in R.S. jolst, channel, angle, tee, flal, plate, latice member built up compound section in column , grider starircase or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths bolting, welding (machining wherever necessary) with supplying a priming cosat of red lead paint all complete as per approved drawing,building specification and direction of E/I. (5.5.28) |
| 41 | Providing and fixing concertina coil fancing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m) having 50 nos. rounds per 6 metre length iron 'Y' shaped placed 2.4 m ro 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. earbed wire tied to angle iron, all complete job as per building specition and direction of E/I (D.S.R. 16.53) |
| 42 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) 5.3.2.3 |
| 43 | Centering and shuttering including strutting,propping etc and removal of from for lintels, beams, plinth beams, girders, bressumers and cantilevers 5.3.17.5 |
| 44 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.DSR 10.5.1 |
| 45 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per specification and direction of E/I and Providing primer one coat or red lead paint of approved makeover new steel surface 5.8.41+5.8.43 |
| 46 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent 11.55.1 DSR |
| 47 | Carriage of materials Cement |
| 48 | Carriage of materials Sand |
| 49 | Carriage of materials stone chips |
| 50 | Carriage of materials stone metal |
| 51 | Carriage of materials stone dust |
| 52 | Carriage of materials Bricks |
| 53 | Carriage of materials Boulder |
| 54 | Goods & Service Tax (G.S.T.) - 18% |
| 55 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender