Drinking Water Supply and Sanitation Government Departments Closing in 14 days TDR #58505738

Tender For Anti-Erosion Measures To Protect Desang Bund Left Bank From Bahgarh To At Road At Barpatragaon Area.

Issued by Government Departments · Sivasagar, Assam
Tender Value
4.94 Crore
Estimated cost
Bid Submission
03 Dec 2026
14 days left
EMD
9.89 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sivasagar → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Anti-Erosion Measures To Protect Desang Bund Left Bank From Bahgarh To At Road At Barpatragaon Area.

BOQ

Name of Work:- Anti-Erosion measures to protect Desang Bund Left Bank from bahgarh to AT Road at Barpatragaon area.
Sl. No. Item Description
1Earth work in embankment by Mechanical means by truck carriage with locally available ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 25cm. thick including ploughing or roughening or benching the seats, removing all debries, breaking clods up to 4cm cube, dressing as per design section and compaction in layers not exceeding 30 cm in thickness and core cutter soil test at every layer and every 500m distance, etc. complete as directed.B. Compaction with vibratory roller of 80-100KN capacity. For initial lead up to 1 Km for all lifts.
2Construction of temporary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart, driven at atleast 0.75 m below ground and height above plinth 2.5m. Split Jatti bamboo/tarza wall 10 cm thick touch roofing over bamboo rua frame, placing at 0.15 m clear apart, fitted with bamboo kamies from binding doors and windows with Bamboo Chattai, strengthening with Bamboo frame binding with wire, roofing with TATA Shaktee roofing sheets etc. compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00 nos / Rm)
3Medium Jungles: Clearing medium jungles and trees upto 15 cm girth including cutting, uprooting roots and stumps, removing them from the site of the work, etc. complete as directed. (When 30% to 60% of the area is covered by shrubs, trees etc)
4Felling trees including uprooting roots and stumps up to 50 cm. below ground, cutting into pieces and removing the same from the site of work etc. complete as directed.Trees above 0.50m and up to 1m girth.
5Earthwork in bank trimming to the designed section /slope by mechanical means including removing the trimmed soils to a minimum distance of 30m ,complete as directed.
6Supply of Geo-textile bags of type-A (1.03 × 0.70 m) inner to inner made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017 i. Wide Tensile strength (MD) ≥ 20KN/m & Wide Tensile strength(CD) ≥20 KN/m ii. Elongation (MD) ≥50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 450N & Trapezoidal Tear Strength (CD) ≥ 450N v. CBR Puncture strength ≥ 4000N vi. Permittivity ≥ 1.10s – 1 vii. Permeability ≥ 40l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 400 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)
7Supply of Geo Bags Type-B (Size 2.00 m × 1.50 m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653:2017 for Nonwoven and IS 16654:2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geotextile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V.resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties i. Tensile strength (MD) ≥ 80 KN/m & Tensile strength (CD) ≥ 70 KN/m ii. Elongation (MD) ≤ 25% & Elongation (CD) ≤ 25% iii. Abrasion ≥ 75% iv. Trapezoidal Tear Strength (MD) ≥ 1500N & Trapezoidal Tear Strength (CD) ≥ 1300N v. CBR Puncture strength ≥ 900N vi. Permeability ≥ 18 l/m2/sec vii. AOS ≤ 250 micron viii. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% ix. Mass ≥ 300 gm/m² x. Seam strength ≥ 50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties i. Wide Tensile strength (MD) ≥ 15 KN/m & Wide Tensile strength (CD) ≥ 15 KN/m ii. Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N v. CBR Puncture strength ≥ 3000 N vi. Permittivity ≥ 1.25 s-1 vii. Permeability ≥ 60 l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 300 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)
8Construction and supply of Wire -netting box of size 1.50 m × 1.50 m × 0.45 m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10 × 12 as per EN 10223 & ASTM A975, mesh wire of 2.70 mm (I.D) /3.70 mm (OD) tensile strength of 450-500/mm2, edge wire selvedge around it at least 2.5 times, lacing wire (Zinc PVC coated) of 2.20 mm (I.D)/3.20 mm (OD), VC coating thickness of 0.50 mm nominal, 0.38 mm minimum, Mesh opening size 150 mm × 150 mm and with average weight per unit being 12 Kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with zinc coated steel wire of required length as directed, complying with ASTM and European norms.
9Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017  Wide Tensile strength (MD) ≥ 15kN/m & Wide Tensile strength (CD) ≥ 15kN/m  Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50%  Abrasion ≥ 95%  Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N  CBR Puncture strength ≥ 3000 N  Permittivity ≥ 1.25 s-1  Permeability ≥ 60l/m2/sec  AOS ≤ 75micron  UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80%  Mass ≥ 300gm/m²  Thickness at 2KPa ≥ 3 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt. of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).
10Supply of Sewing Thread / Yarn PPMF Stitching Thread (2000 Den. Kaplon) .
11Carriage of Geo bags of size 1.03 x 0.70m/1.0m x 0.70m including loading & unloading, stacking, etc. Complete and including hire charge of truck with driver and handyman cost of POL etc. completed as directed. (Distance to be calculated from division store, Distance = 25.00 km)
12Carriage of Geo bags of size 2.00 x 1.50 m including loading & unloading, stacking cost of P.O.L. etc. Complete and including hire charge of truck with driver and handyman , etc. completed as directed. (Distance to be calculated with respect to from Division Store, Distance = 25.00 km)
13Carriage of 300 gsm Geo sheet including loading & unloading, stacking cost of P.O.L. etc. Complete and including hire charge of truck with driver and handyman, etc. completed as directed. (Distance to be calculated with respect to from Division Store, Distance = 25.00 km)
14Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of sand/ silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Sand/Silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without boat.
15Filling and laying of nonwoven Geo-textile bag of dimension 2.00m × 1.50m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt, having minimum volume 0.612 Cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100 m complete as directed.(Geo Bag and Polypropylene thread will be supplied by the department free of cost)With Engine Boat
16Filling and laying in PVC coated W.N. Box of size 1.5mX1.5mX0.45m with sand/silt filled Geo bags of size 1.03m x 0.70m excluding excavation of sand/silt , filling geo bags with sand/silt, having minimum weighing 126.00 Kg and minimum volume 0.084Cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly in PVC coated W.N. Box, Complete as directed.(Geo Bag , PVC coated Wire netting Box and Polypropylene thread will be supplied by the department free of cost) Without Boat .
17Earth work in Excavation of drainage Channel by mechanical means to the proper grade and slopes as required including disposing the excavated debris/ soil to a safe distance of minimum 50m distance, etc. Complete as directed. For lead upto 50m and all lifts. Normal Soil.
18Earth work in excavation of drainage channel by mechanical means to the proper grade and slopes as required including disposing the excavated debries / soil to a safe distance of minimum 50m distance etc. complete as directed .For lead up to 50m and all lifts. Wet & sticky soil
19Collection and supply of sand from approved quarry of specified grade for construction work free from debries and other foreign material etc. complete as directed.
20Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in Charge.
21Collection of broken stone metal of size 13 mm. to 38 mm in average free from dust, dirt and other foreign materials including local carriage and stacking in regular measurable stacks of approximate 1 (One) m. height at quarry site, etc. complete as directed.
22Labour charge for making filter bed of required thickness with stone metal of size 13 mm to 38 mm over the trimmed surface of river bank/embankment, slope, including site carriage of metal within a distance of 150 m etc. complete as directed. Without Boat
23Earth work in filling by mechanical means by deploying hydraulic excavator and trippers etc. including ramming with locally available ordinary soil excluding rocky soil with all lead and lift, transporting to site, spreading, dressing as per design section including ploughing or roughening or benching the seats, removing all debris, breaking clods up to 2.5cm cube, etc. complete as directed. (12.5 % deduction will be made from the section measured quantities of the completed and compacted earth work on account of shrinkage)For initial lead up to 1 Km and for all lifts
24RCC Guard post : Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M15 grade (normal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips up to 0.75m from the top alternately in black and white and having 2nos reflective band of desired shade etc. complete as per design and as directed.b)15cm dia RCC guard post with reinforcement of 4 nos 12 mm dia TMT main steel bars and 6 mm TMT/MS stirrupps at 15cm C/C
25Ordinary/unskilled labour
26Supply of Pre-stressed Cement Concrete (PSC) Porcupine members of size 0.10m x 0.10m x 3.00m with M-30 grade of cement concrete conforming to IS 1343:2012 using super- plasticizer @ 1.2 ltr/bag of cement with graded broken course aggregate up to 20mm size down and reinforced to IS 10262: 2009 & IS 456: 2000 and reinforced with 4 nos of 4mm dia high tensile steel wire cable / strain with necessary cover and 4mm high tensile stirrups at 250mm C/C , in conformity with IS-6403 : R2002 and stressed to required strength not execeding 9.18 N/mm, holes of 16mm dia at 50cm inside from both ends in the same face and in eighter face of post another 2 nos of holes of size 16mm dia at 65mm inside from both ends including properly curing for 21 (twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 50 km including loading, unloading & stacking complete as directed.
27Labour charge for launching of PSC Porcupine including carriage of PSC Porcupine members of size 0.10m x 0.10m x 3.00m from the stack yard to the place of launching , erection of the Porcupine with 6 (six) members properly, supply & fitting/ fixing with 12mm dia 25cm long M.S Nuts and bolts and launching the porcupine properly as directed . ( Lead up to 150m)Launching without boat
28Labour charge for launching of PSC Porcupine including carriage of PSC Porcupine members of size 0.10m x 0.10m x 3.00m from the stack yard to the place of launching , erection of the Porcupine with 6 (six) members properly, supply & fitting/ fixing with 12mm dia 25cm long M.S Nuts and bolts and launching the porcupine properly as directed . ( Lead up to 150m)Launching with boat Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58505738
AUTHORITY Government Departments
TENDER VALUE 4.94 Crore
LAST DATE 03-12-2026
Authority
Authority Name Water Resources Department
Work Description Tender for Anti-Erosion Measures To Protect Desang Bund Left Bank From Bahgarh To At Road At Barpatragaon Area.
Basic Detail
Tender No SIVASAGAR/2026-27/RIDF XXXII/IV
Bidding Type Tender
Location
City Sivasagar
State Assam
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 4.94 Crore
Tender Fee 10000
EMD 9.89 Lakhs
Exemption Available
Document List
BOQ_86087.xls
borpatragaon_bid.pdf
cf771803-7b06-4e12-a9d2-96b72c81a09a.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_86087.xls

pdf

borpatragaon_bid.pdf

html

cf771803-7b06-4e12-a9d2-96b72c81a09a.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender