Water Resources and Irrigation Government Departments Closing in 2 days TDR #58505663

Tender For Installation And Energisation Of Abankela-I,Ii,Iii Revival And Reinforcement R.L Project In Tangarpali Block Of Sundaragada District

Issued by Government Departments · Sundargarh, Odisha
Tender Value
30.64 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
2 days left
EMD
30649
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Installation And Energisation Of Abankela-I,Ii,Iii Revival And Reinforcement R.L Project In Tangarpali Block Of Sundaragada District

BOQ

Name of Work:- INSTALLATION AND ENERGISATION OF ABANKELA-I,II,III REVIVAL AND REINFORCEMENT R.L PROJECT IN TANGARPALI BLOCK OF SUNDARAGADA DISTRICT
Sl. No. Item Description
1ABANKELA-I
2Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge.
3Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
4Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.
5Cement concrete (1:4:8) with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.
6Brick work with FLY ASH. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth . complete as per the Engineer-incharge.
7Brick work with FLY ASH. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in super structureetc. complete as per the Engineer-incharge.
8Cement concrete (1:2:4) with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge.
9Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) floor and roof slab, balconies, projecting sun shades and chajjas
10Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) RCC lintels
11Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) foundation , plinth band and footings bases of columns mass concrete precastslabs etc
12Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) walls and fins including attached pillasters
13Supply, fitting & placing uncoated HYSD Bar reinforcement complete as per drawing & technical specification including cost, taxes, conveyance charges of etc. complete as directed by the Engineer-incharge.
14R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
1512mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
16White washing three coats with Stone lime
17Colour washing two coats with stone Lime including colouring
18Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
19M.S. pannel door single leafed with M.S. frame overall size includingframe of height (1.0 x2.0)mt. width for door and shutter of 18 gauge CR sheet pannel as per approved size & specification etc. complete including cost of all materials fitting and fixing the door etc. complete as per the direction of the Engineer in charge.
20Cement washing 2 coats per 1 Sqm.
212.5cm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve querry including water and curring with cost taxes royalty and conveyance charges of all material toworksite and supply of all labour and T&P required for the work complete as directed by the Engineer in charge.
22Dry brick khoa rammed to 4” size in flooring
23Painting red oxide primer for priming over iron work including cost of labour etc. complete as per direction of the Engineer in charge.
24Painting two coats with any approved paints
25Labour charges & Cost of PVC Pipe for jointing the pipes with solvent cement including fitting and fixing of required no. of PVC Tee . including cost Solvent Cement, Transportation of Pipe including conveyance pipe from village to worksite 200mm dia PVC Class-I Pipe
26Labour charges & Cost of PVC Pipe for jointing the pipes with solvent cement including fitting and fixing of required no. of PVC Tee . including cost Solvent Cement, Transportation of Pipe including conveyance pipe from village to worksite 160mm dia PVC Class-I Pipe
27Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. A) Hard Soil
28Filling in F&P with excavated materials including well watered and rammed.in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical plus mannual
2912.5 HP Centrifugal Monoblock pumpset 20mtr. Head to discharge 1700 LPM
30Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer
3163 Amp. 400 Volt.T.P. main switch (EPM Standard)
324 KVR Capacitor
33Base frame of motor
34Cost of base plate for control panel
353 x 16mm2 T.D. Cable laying underground including excavation of earth sand filling etc.complete
362.5 mm2 s/s flat. Cable laying underground including excavation of earth sand filling etc.complete
37100 mm dia. G.I. Pipe
38100mm C.I. Foot Valve
39100 mm dia. G.I.Flange
40100 mm dia. G.I. Bend
41100mm C.I. N.R. Valve
42Cost of 100 mm dia GI Nipple
43Cost of 100mm dia GI Socket
44Cost of 200 mm pvc end cap
45Cost of 160 mm pvc end cap
46Cost of 200mm x 200mm x 160 mm PVC Tee
47200mm x110 mm PVC reducing socket
48110 mm PVC FTA
4950mm C.I. Air Release Valve with saddle,riser pipe,bend etc for proctection tank
50Cost of 100X100X25mm G.I. tee, Bend, Bulb Valve for Priming & welding
51Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement.
52Cost of 200 mm dia PVC coupler
53Cost, supplyuing of M.S Nuts and Bolts, packing etc (1/2\\" to 5/8\\")
54Motor Hood
55Labour charges for installation of. Motors 1nos. including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, NR Valve, Foot Valve and other fitting materials like nut bolt,leather packing etc with cutting, welding inluding electricals installation etc. complete.
56Cost of embankment crossing with RR Stone packing
57Supply of T & P Kit comprising of hand gloves- 1 pair, tester - 1 no, 8 inch cutting plier - 1 no, 12 inch sly wrench -1 no, 12 inch Screw driver - 1no , 24/27 & 21/23 De spanner -2 nos, 24/27 & 21/23 Ring spanner -2 nos (Taparia) with Bag
58Internal wiring of Pump house
59Electrical installation with electrical materials such as PVC tape, ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, G.I. flexible conduite pipe, No.6 G.I. wire, copper cable socket, G.I. socket and flange and petty materials required for electrical installation including fixing of TD cable inside the earth trench as per direction of Engineer-in-charge..
60Electrical Earthing including all materials as per the direction of the Engineer-incharge.
61ABANKELA-II
62Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge.
63Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
64Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.
65Cement concrete (1:4:8) with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.
66Brick work with FLY ASH. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth . complete as per the Engineer-incharge.
67Brick work with FLY ASH. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in super structureetc. complete as per the Engineer-incharge.
68Cement concrete (1:2:4) with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge.
69Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) floor and roof slab, balconies, projecting sun shades and chajjas
70Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) RCC lintels
71Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) foundation , plinth band and footings bases of columns mass concrete precastslabs etc
72Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) walls and fins including attached pillasters
73Supply, fitting & placing uncoated HYSD Bar reinforcement complete as per drawing & technical specification including cost, taxes, conveyance charges of etc. complete as directed by the Engineer-incharge.
74R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
7512mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
76White washing three coats with Stone lime
77Colour washing two coats with stone Lime including colouring
78Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
79M.S. pannel door single leafed with M.S. frame overall size includingframe of height (1.0 x2.0)mt. width for door and shutter of 18 gauge CR sheet pannel as per approved size & specification etc. complete including cost of all materials fitting and fixing the door etc. complete as per the direction of the Engineer in charge.
80Cement washing 2 coats per 1 Sqm.
812.5cm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve querry including water and curring with cost taxes royalty and conveyance charges of all material toworksite and supply of all labour and T&P required for the work complete as directed by the Engineer in charge.
82Dry brick khoa rammed to 4” size in flooring
83Painting red oxide primer for priming over iron work including cost of labour etc. complete as per direction of the Engineer in charge.
84Painting two coats with any approved paints
85Labour charges & Cost of PVC Pipe for jointing the pipes with solvent cement including fitting and fixing of required no. of PVC Tee . including cost Solvent Cement, Transportation of Pipe including conveyance pipe from village to worksite 200mm dia PVC Class-I Pipe
86Labour charges & Cost of PVC Pipe for jointing the pipes with solvent cement including fitting and fixing of required no. of PVC Tee . including cost Solvent Cement, Transportation of Pipe including conveyance pipe from village to worksite 160mm dia PVC Class-I Pipe
87Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. A) Hard Soil
88Filling in F&P with excavated materials including well watered and rammed.in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical plus mannual
8912.5 HP Centrifugal Monoblock pumpset 20mtr. Head to discharge 1700 LPM
90Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer
9163 Amp. 400 Volt.T.P. main switch (EPM Standard)
924 KVR Capacitor
93Base frame of motor
94Cost of base plate for control panel
953 x 16mm2 T.D. Cable laying underground including excavation of earth sand filling etc.complete
962.5 mm2 s/s flat. Cable laying underground including excavation of earth sand filling etc.complete
97100 mm dia. G.I. Pipe
98100mm C.I. Foot Valve
99100 mm dia. G.I.Flange
100100 mm dia. G.I. Bend
101100mm C.I. N.R. Valve
102Cost of 100 mm dia GI Nipple
103Cost of 100mm dia GI Socket
104Cost of 200 mm pvc end cap
105Cost of 160 mm pvc end cap
106Cost of 200mm x 200mm x 160 mm PVC Tee
107200mm x110 mm PVC reducing socket
108110 mm PVC FTA
10950mm C.I. Air Release Valve with saddle,riser pipe,bend etc for proctection tank
110Cost of 100X100X25mm G.I. tee, Bend, Bulb Valve for Priming & welding
111Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement.
112Cost of 200 mm dia PVC coupler
113Cost, supplyuing of M.S Nuts and Bolts, packing etc (1/2\\" to 5/8\\")
114Motor Hood
115Labour charges for installation of. Motors 1nos. including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, NR Valve, Foot Valve and other fitting materials like nut bolt,leather packing etc with cutting, welding inluding electricals installation etc. complete.
116Cost of embankment crossing with RR Stone packing
117Supply of T & P Kit comprising of hand gloves- 1 pair, tester - 1 no, 8 inch cutting plier - 1 no, 12 inch sly wrench -1 no, 12 inch Screw driver - 1no , 24/27 & 21/23 De spanner -2 nos, 24/27 & 21/23 Ring spanner -2 nos (Taparia) with Bag
118Internal wiring of Pump house
119Electrical installation with electrical materials such as PVC tape, ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, G.I. flexible conduite pipe, No.6 G.I. wire, copper cable socket, G.I. socket and flange and petty materials required for electrical installation including fixing of TD cable inside the earth trench as per direction of Engineer-in-charge..
120Electrical Earthing including all materials as per the direction of the Engineer-incharge.
121ABANKELA-III
122Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge.
123Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
124Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.
125Cement concrete (1:4:8) with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.
126Brick work with FLY ASH. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth . complete as per the Engineer-incharge.
127Cement concrete (1:2:4) with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge.
128Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) walls and fins including attached pillasters
129Supply, fitting & placing uncoated HYSD Bar reinforcement complete as per drawing & technical specification including cost, taxes, conveyance charges of etc. complete as directed by the Engineer-incharge.
130R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
13112mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
132Colour washing two coats with stone Lime including colouring
133Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
134Labour charges & Cost of PVC Pipe for jointing the pipes with solvent cement including fitting and fixing of required no. of PVC Tee . including cost Solvent Cement, Transportation of Pipe including conveyance pipe from village to worksite 200mm dia PVC Class-I Pipe
135Labour charges & Cost of PVC Pipe for jointing the pipes with solvent cement including fitting and fixing of required no. of PVC Tee . including cost Solvent Cement, Transportation of Pipe including conveyance pipe from village to worksite 160mm dia PVC Class-I Pipe
136Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. A) Hard Soil
137Filling in F&P with excavated materials including well watered and rammed.in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical plus mannual
13812.5 HP Centrifugal Monoblock pumpset 20mtr. Head to discharge 1700 LPM
139Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer
14063 Amp. 400 Volt.T.P. main switch (EPM Standard)
1414 KVR Capacitor
142Base frame of motor
143Cost of base plate for control panel
1443 x 16mm2 T.D. Cable laying underground including excavation of earth sand filling etc.complete
1452.5 mm2 s/s flat. Cable laying underground including excavation of earth sand filling etc.complete
146100 mm dia. G.I. Pipe
147100mm C.I. Foot Valve
148100 mm dia. G.I.Flange
149100 mm dia. G.I. Bend
150100mm C.I. N.R. Valve
151Cost of 100 mm dia GI Nipple
152Cost of 100mm dia GI Socket
153Cost of 200 mm pvc end cap
154Cost of 160 mm pvc end cap
155Cost of 200mm x 200mm x 160 mm PVC Tee
156200mm x110 mm PVC reducing socket
157110 mm PVC FTA
15850mm C.I. Air Release Valve with saddle,riser pipe,bend etc for proctection tank
159Cost of 100X100X25mm G.I. tee, Bend, Bulb Valve for Priming & welding
160Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement.
161Cost of 200 mm dia PVC coupler
162Cost, supplyuing of M.S Nuts and Bolts, packing etc (1/2\\" to 5/8\\")
163Motor Hood
164Labour charges for installation of. Motors 1nos. including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, NR Valve, Foot Valve and other fitting materials like nut bolt,leather packing etc with cutting, welding inluding electricals installation etc. complete.
165Cost of embankment crossing with RR Stone packing
166Supply of T & P Kit comprising of hand gloves- 1 pair, tester - 1 no, 8 inch cutting plier - 1 no, 12 inch sly wrench -1 no, 12 inch Screw driver - 1no , 24/27 & 21/23 De spanner -2 nos, 24/27 & 21/23 Ring spanner -2 nos (Taparia) with Bag
167Electrical installation with electrical materials such as PVC tape, ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, G.I. flexible conduite pipe, No.6 G.I. wire, copper cable socket, G.I. socket and flange and petty materials required for electrical installation including fixing of TD cable inside the earth trench as per direction of Engineer-in-charge..
168Electrical Earthing including all materials as per the direction of the Engineer-incharge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58505663
AUTHORITY Government Departments
TENDER VALUE 30.64 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Installation And Energisation Of Abankela-I,Ii,Iii Revival And Reinforcement R.L Project In Tangarpali Block Of Sundaragada District
Basic Detail
Tender No EEOLICSNGH-02/2026-2027
Bidding Type Tender
Location
City Sundargarh
State Odisha
Key Dates
Publish Date 13 Nov 2026
Submission Date 21 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 30.64 Lakhs
Tender Fee 7080
EMD 30649
Exemption Available
Document List
b324a31c-d071-4d70-97fe-421762c722ac.html
BOQ_620343.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

b324a31c-d071-4d70-97fe-421762c722ac.html

xls

BOQ_620343.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender