Tender For Construction Of R W Rest Shed Building At Bhatil For The Year 2026-27 In The Dist. Of Baragada.
Tender Value
1.49 Crore
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
1.49 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of R W Rest Shed Building At Bhatil For The Year 2026-27 In The Dist. Of Baragada.
BOQ
| Sl. No. | Item Description |
| 1 | Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment). |
| 2 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) Ground floor |
| 3 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) Compound wall |
| 4 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) Internal road |
| 5 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) Ground floor |
| 6 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) Compound wall |
| 7 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) Internal road |
| 8 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. Ground floor |
| 9 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. Compound wall |
| 10 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. Ground floor |
| 11 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. Compound wall |
| 12 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ground floor |
| 13 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Compound wall |
| 14 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Column Foundation |
| 15 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Plinth Beam |
| 16 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Column Super Structure |
| 17 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Lintel |
| 18 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor First Floor Beam |
| 19 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Roof Slab |
| 20 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Chaja |
| 21 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Ground Floor Staircase |
| 22 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. First Floor Column Super Structure |
| 23 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. First Floor Lintel |
| 24 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. First Floor First Floor Beam |
| 25 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. First Floor Roof Slab |
| 26 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. First Floor Chaja |
| 27 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. First Floor Staircase |
| 28 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Head Room Column Super Structure |
| 29 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Head Room Roof Beam |
| 30 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Head Room Roof Slab |
| 31 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Compound wall Column Foundation |
| 32 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Compound wall Plinth Beam |
| 33 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Compound wall Column Super Structure |
| 34 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. Compound wall First Floor Beam |
| 35 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. Ground floor |
| 36 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. First floor |
| 37 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. Second floor / Terrace Floor |
| 38 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. Compound wall |
| 39 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ground floor |
| 40 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. First floor |
| 41 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Terrace Floor |
| 42 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Compound wall |
| 43 | Brick work with Fly Ash. Bricks in cement mortar (1:4) in Super Structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. Ground floor |
| 44 | Brick work with Fly Ash. Bricks in cement mortar (1:4) in Super Structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. First floor |
| 45 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ground floor |
| 46 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. First floor |
| 47 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Terrace floor |
| 48 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Compound wall |
| 49 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside) Ground floor |
| 50 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside) First floor |
| 51 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside) Terrace floor |
| 52 | Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge. Ground Floor |
| 53 | Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge. First Floor |
| 54 | Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge. Terrace Floor |
| 55 | Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge. Ground Floor |
| 56 | Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge. First Floor |
| 57 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete Ground Floor |
| 58 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete First Floor (Inside) |
| 59 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete First Floor (Outside) |
| 60 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete Terrace Floor (Inside) |
| 61 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete Terrace Floor (Outside) |
| 62 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete Compound wall |
| 63 | Wall Painting two coats with approved Distemper including all labour, materials etc. complete. Ground Floor |
| 64 | Wall Painting two coats with approved Distemper including all labour, materials etc. complete. First Floor |
| 65 | Wall Painting two coats with approved Distemper including all labour, materials etc. complete. Terrace Floor |
| 66 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Ground Floor |
| 67 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. First Floor |
| 68 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Compound wall |
| 69 | Wall painting two coats with Acrylic paint(plastic emulsion) over a coat of primer of approved quality of premium brand & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.Ground Floor |
| 70 | Supplying, fitting and fixing Vitrified tile in floors of approved make confirmating to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. First Floor |
| 71 | Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.First Floor |
| 72 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-chargeGround Floor |
| 73 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-chargeFirst Floor |
| 74 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-chargeGround Floor |
| 75 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground FloorGround floor Roof |
| 76 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground FloorFirst floor Roof |
| 77 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. Ground Floor |
| 78 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. First Floor |
| 79 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. Compound Wall |
| 80 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)Ground Floor |
| 81 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)First Floor |
| 82 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)Second Floor |
| 83 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)Compound wall |
| 84 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C.Ground Floor |
| 85 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C.First Floor |
| 86 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C.Second Floor |
| 87 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C.Compound wall |
| 88 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 89 | Supplying, fiting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture etc. complete Ground Floor |
| 90 | Supplying, fiting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture etc. complete First Floor |
| 91 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in frames of doors, windows & ventilabours Ground Floor |
| 92 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in frames of doors, windows & ventilabours First Floor |
| 93 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 94 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 95 | Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. |
| 96 | Providing granular sub-base (Moroom Sand Admixture) in layers not eceeding 22.5 cm well watered and compaction to the required density in O.M.C with Vibrater roller. etc. complete including cost, carriage, royalty . as directed by the Engineer-in-charge |
| 97 | Providing & laying of 80mm thick factory made cement concrete interlocking paver block of M-35 grade & approved make,varity,colour & size made by Block macking machine with strong vibratory compaction of approved design & shape laid in required colour & pattern over 50mm thick compacted bed of coarse sand ,filling the joints with fine sand etc .All complete including cost,conveyance,royalty,taxes of all material,,labour T&P,complete as per direction of Engineer-in-Chargeetc. complete in all respect as per specification and direction of Engineer-in-charge |
| 98 | EI WORKS:-Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. (Group-A: L.P= F.P= C.B.P) Make: Conduit:precision/AKG/BEC/AnchorWire:KEI/Finolex/PolycabSwitch & socket: Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 99 | Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. (Group-B: L.P= F.P= C.B.P)Make: Conduit:precision/AKG/BEC/AnchorWire:KEI/Finolex/PolycabSwitch & socket: Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 100 | Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. (Group-C: L.P= F.P= C.B.P)Make: Conduit:precision/AKG/BEC/AnchorWire:KEI/Finolex/PolycabSwitch & socket: Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 101 | Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required.Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 102 | Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 103 | Supplying and fixing including testing and commissioning of 1 nos 6 Amp 3-pin socket with 6 Amp switch including providing GI modular box with faceplate etc as required.Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 104 | Supplying and fixing including testing and commissioning of 2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.including providing GI modular box with faceplate etc as required.Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 105 | Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.Make:Legrand(Myirus)/schneider-Zenclo/Siemens (Marq) |
| 106 | Wiring for circuit/ submain wiring along with earth wire 2 x 2.5 sq.mm + 1 x 1.5 sq.mm (for Light plug circuit wiring) of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.Make-KEI/Finolex/Polycab |
| 107 | Wiring for circuit/ submain wiring along with earth wire 2 x 4 sq.mm + 1 x 1.5 sq.mm (For power circuit) of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.Make-KEI/Finolex/Polycab |
| 108 | Wiring for circuit/ submain wiring along with earth wire 2 x 6 sq.mm + 1 x 4 sq.mm(For SPN DB & AC POINT) of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.Make-KEI/Finolex/Polycab |
| 109 | Wiring for circuit/ submain wiring along with earth wire 4 x 10 sq.mm (For TPN DB) of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required.Make-KEI/Finolex/Polycab |
| 110 | Supply delivery installation testing & commissioning of following types of recessed mounted 36 watt indoor type LED panel 2' x 2' square LED Luminare with 120 Lm/w with high efficency made 6500 cct IP40 LED chip life of 50000 burning hours at L70 Minimum tested for 10K hours for complaince of TM21 projection Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 90V to 265V nominal rated voltage 240V with minimum 2 KV surge protection, PF >0.90, THD <10% IP 40 and as per the direction of E.I.C. Make:WIPRO LT TRILUX/REGENT/HALONIX/PHILIPS/OSRAM |
| 111 | Supplying of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge.(Make-Wipro/Philips/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 112 | Supplying of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make-Wipro/Philips/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 113 | Supply, Installation, testing & commissioning of 60W-80w LED highbay light with IP66 protection flame proof wellglass made up of pressure die cast aluminium housing white light.(Make-Wipro/Bajaj/Crompton/Philips |
| 114 | Supplying of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.(Make-Wipro/Philips/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 115 | Supplying of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make : Crompton/ Orient/ Havells/Polycab). |
| 116 | Supplying, installation, of 200 mm sweep fibre body Exhaust air fan (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 117 | Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient wall FAN 400 MM Air Delivery Wall Fan Motor Speed: 1440 RPM Power Consumption: 180 W Blade Sweep Size: 600 mm Number of Speed Settings: 1 Material: Metal..Dominarie wall Fan complete with Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet complete as required and as per the Direction of Engineer-In-Charge.(Make-USHA,Bajaj,Havells,ALmonrad,Crompton) |
| 118 | 6 way(8+18), Double door, ETPN DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years |
| 119 | Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 120 | Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredMake :-ABB/LK/Legrand 40 Amps2P,30mA, RCBO |
| 121 | Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredMake :-ABB/LK/Legrand 63 Amps4P MCB |
| 122 | Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredMake :-ABB/LK/Legrand 40 Amps2P RCCB |
| 123 | Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredMake :-ABB/LK/Legrand 6A/32A SPMCBs(C-Curve) |
| 124 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 125 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 126 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32mm |
| 127 | Supply and laying of 25/32mm U PVC trunking system and acessories.(Make:Legrand/MK(honeywell) |
| 128 | Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 129 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 130 | Installation, testing and commissioning of exhaust fan up to 200 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required. |
| 131 | Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored. |
| 132 | FIRE EXTINGUISHER SYSTEM Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket . (Make: superimax/Cese fire/Minimax) |
| 133 | Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. (Make: superimax/Cese fire/Minimax) |
| 134 | Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket.(Make: superimax/Cese fire/Minimax) |
| 135 | Fire buckets ( without sand) round bottom type enamel painted, white inside & Red out side and Letter \\"FIRE\\" in black out side and handle with mounting bracket. |
| 136 | First Aid Box. |
| 137 | LIGHTNING PROTECTION SYSTEM Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor. Tested as per IEC 62561. (Make:OBO/ABB/ DHEN). |
| 138 | Supply , Installation, Testing & commissioning of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. (Make:OBO/ABB/ DHEN). |
| 139 | Supply , Installation, Testing & commissioning of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. (Make:OBO/ABB/ DHEN). |
| 140 | Supply , Installation, Testing & commissioning of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .Tested as per IEC 62561. (Make:OBO/ABB/ DHEN). |
| 141 | Supply , Installation, Testing & commissioning of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current.(Make:OBO/ABB/ DHEN). |
| 142 | Supply , Installation, Testing & commissioning of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ). (Make:OBO/ABB/ DHEN). |
| 143 | Supply , Installation, Testing & commissioning of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. (Make:OBO/ABB/ DHEN). |
| 144 | Supply , Installation, Testing & commissioning of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.Tested as per IEC 62561. (Make:OBO/ABB/ DHEN). |
| 145 | Supply , Installation, Testing & commissioning of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current .(Make:OBO/ABB/ DHEN). |
| 146 | Supply , Installation, Testing & commissioning of Stand for Fang Fix system 16 kg made up of frost resistant concrete.(Make:OBO/ABB/ DHEN). |
| 147 | Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor.Tested as per IEC 62561.(Make:OBO/ABB/ DHEN). |
| 148 | Supply , Installation, Testing & commissioning of Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561.(Make:OBO/ABB/ DHEN). |
| 149 | Supply , Installation, Testing & commissioning of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.Tested for 100kA lightning current.(Make:OBO/ABB/ DHEN). |
| 150 | Supply , Installation, Testing & commissioning of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561.(Make:OBO/ABB/ DHEN). |
| 151 | Supply , Installation, Testing & commissioning of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. (Make:OBO/ABB/ DHEN). |
| 152 | Supply , Installation, Testing & commissioning of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561.(Make:OBO/ABB/ DHEN). |
| 153 | Supply , Installation, Testing & commissioning of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. (Make:OBO/ABB/ DHEN). |
| 154 | Supply , Installation, Testing & commissioning of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 14.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 (Make:OBO/ABB/ DHEN). |
| 155 | Supply , Installation, Testing & commissioning of universal clamp made of SS to connect rod with flat conductor (Make:OBO/ABB/ DHEN). |
| 156 | Supply , Installation, Testing & commissioning of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested (Make:OBO/ABB/ DHEN). |
| 157 | Supply , Installation, Testing & commissioning of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system (Make:OBO/ABB/ DHEN). |
| 158 | Installation of The above arrangements including all accessories as per Direction of Engg. In charge. |
| 159 | AIR CONDITION SYSTEMS Supply, Installation, Testing, Commissioning of highwall Inverter comptabilie split units (minimum 5 star) of 1.5 TR capacity including proper mounting arrangements and accessories, copper refregirant piping,pvc drain piping,power cable,control cable, initial charge of refrigerant, safety limit thermostat, etc complete including 5 KVA voltage stabilizers. ( Make - Voltas/Daikin/LG/Hitachi ) |
| 160 | Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job for 1 TR to 3 TR high wall split A.C. |
| 161 | Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job for 1 TR to 3 TR high wall split A.C |
| 162 | Supply,installation & fabrication of Insulated drain water piping 25mm nom. Dia pipe from indoor to nearestdrain point separate to all and other nesessary material to complete the job. |
| 163 | SUB DISTRIBUTION PANEL S I T&Commissioning of LT indoor floor mounted cubical type electrical main panel for both light and power circuit made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. FOR ALL MAIN CONNECTED LOAD BUILDING POWER)as per direction of Engg.in Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 25 kA with 160A 4P MCCB 10kA Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.Make Schneider CVS Legrand DPX3 Siemens 3VA ABB Formula Busbar 200A AL busbar with SC rating of 25KA Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. One 1 160 Amp Moulded Case Circuit Breaker 4P Breaking capacity 25 KA breaking capacity as mentioned in the BOQ with Therma Magnet Based Release with Ics=100% Icu with 3 NosIndicating lamp for ON/OFF/Trip with control fuse/ MCB, 3 Nos 160A/5 A 15VA Cl 1.0 CTs, 1No - Multifunction meter (V,A,KWHr, KW, P, F) Make-Schneider(CVS)/Legrand(DPX3)/Siemens(3VA)/ABB(Formula)Eleven(6) - Outgoing Feeders : 03 Nos for L/PDB,1 nos per lift & 01 Nos Spare each comprising ofFive(5) - Outgoing Feeders :03 Nos for L/PDB ,01 nos for UPS & 01 Nos Spare each comprising ofOne(1)40Amp,2p,MCB,C-CURVE Make-Schneider(CVS)/Legrand(DPX3)/Siemens(3VA)/ABB(Formula)Three(3)40Amp,4p,MCB,C-CURVE Make-Schneider(CVS)/Legrand(DPX3)/Siemens(3VA)/ABB(Formula) |
| 164 | EARTHING Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt as required as per the direction of Engineer-in-charge. |
| 165 | Providing and fixing 50mm x 6 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 166 | Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 167 | Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required. |
| 168 | Providing and fixing 8 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 169 | PH WORKS:- Supplying all materials,labour and T&P for cutting grouves in Pucca Floors & walls for taking GI/ PVC Pipes and making good the damages as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. |
| 170 | Supplying all materials,labour and T&P for cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. |
| 171 | Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including making good and leak proof to the damages for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification and direction of Engineer-in-Charge. |
| 172 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. Supplying & fixing CPVC Pipe 20mm dia |
| 173 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. Supplying & fixing CPVC Pipe 25mm dia |
| 174 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. Supplying & fixing CPVC Pipe 32mm dia |
| 175 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. Supplying & fixing CPVC Pipe 40mm dia |
| 176 | Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete as per direction of Engineer-in-Charge. Supplying & fixing CPVC Pipe 50mm dia |
| 177 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification completeSupply Gunmetal Ball Valve 20 mm dia |
| 178 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification completeSupply Gunmetal Ball Valve 25 mm dia |
| 179 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification completeSupply Gunmetal Ball Valve 50 mm dia |
| 180 | Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete. 15mm dia Brass Screw-down Bib Cock |
| 181 | Fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of the following nominal bore as per specification 15mm dia CP Pillar Cock |
| 182 | Supplying all labour and T&P for fixing CPVC Ball Valve of the following size as per specification all complete.15mm Brass/GM Ball Valve |
| 183 | Supplying all labour and T&P for fixing CPVC Ball Valve of the following size as per specification all complete.32mm UPVC Ball Valve |
| 184 | Fixing & Hoisting of 2000 Lit 3-layerwhite Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the E.I.C . |
| 185 | Supplying & fixing Porcelain A.I.W.C. with S-trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1: 1) etc with Supplying & fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. |
| 186 | Providing and fixing P.V.C. low level flushing cistern 10 litre capacity (White) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cost of all materials, labour & labourcess complete as per specification and direction of Engineer-in-Charge. |
| 187 | Fixing Porcelain Counter Top Basin Oval Shape (550x430) conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 188 | Supplying all materials,labour and T&P for fixing of C.P. Steel revolving Shower Rose of 15mm inlet including polishing etc. complete as per specification. (including cost of Shower ) |
| 189 | Providing and fixing Stainless steel kitchen sink - without drain board 610x460 lSI 304 (18/8) as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and makina aood the walls wherever reauired. |
| 190 | Providing and fixing 15mm dia C.P swan neck Pillar cock with spout |
| 191 | Supplying & fixing C.P. Two-way Bibcock with wall Flange. |
| 192 | Supplying & fixing C.P. Health Foucet with 1m PVC tube (Stainless steel) & wall hook as per specification all complete including cost of materials. |
| 193 | Fixing Fixing 15mm dia C.P. Pillar cock with swinging spout all complete as per specification & Direction of Engineer-in-Charge. |
| 194 | Supplying & fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification and direction of Engineer-in-Charge. |
| 195 | Fixing BOTTLE TRAP of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
| 196 | Supplying & Fixing flexible (Coil shaped) PVC waste pipe for wash basin or sink 32 mm dia with length not less than 700 mm with PVC waste fittings including cost of all materials, labour & labourcess etc. complete as per specification & direction of the Engineer-in-Charge.(Drain pipe light 900mm) |
| 197 | Fixing 40 mm dia waste Coupling (F/T) for wash basin or sink 32 mm dia with length not less than 700 mm with PVC waste fittings etc. complete as per specification & direction of the Engineer-in-Charge. |
| 198 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers comolete as per specification. |
| 199 | Supplying all materials,labour and T&P for fixing of C.P. SS soap holder fixed to wooden plugs with chromium plated brass screws and washers etc. all complete including cost of all materials, labour & labourcess complete as per specification and direction of Engineer-in-Charge. |
| 200 | Supplying all materials,labour and T &P for fixing 20mm x 600mm size Cromoum Plated brass Towel Rail fixed to wooden plugs with chromium plated brass screws and washers including cost of all materials, labour & labourcess . all complete as per specification and direction of Engineer-in-Charge.(including cost of towel Rail) |
| 201 | Supplying all materials,labour and T &P for fixing Cromoum Plated Steel Towel Ring fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.(including cost of towel Ring) |
| 202 | Supplying all materials,labour and T &P for fixing of different size PVC Nahani trap (110mm x75mm) with grating of self cleaning design with stainless steel grating or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification including cost of all materials, labour & labourcess etc complete as per direction of Engineer-in-Charge. |
| 203 | Supplying & fixing of bath/toilet/kitchen fittings of the following size & specification including cost of fittings etc complete in all respect 15mm dia. CP Brass Angle stop Cock |
| 204 | Supplying & fixing of bath/toilet/kitchen fittings of the following size & specification including cost of fittings etc complete in all respect 15mm dia. CP concealed stop Cock |
| 205 | Supplying & fixing of bath/toilet/kitchen fittings of the following size & specification including cost of fittings etc complete in all respect 15 mm dia Long Body Bib Cock for Hose |
| 206 | Providing and fixing on wall face unplasticised Rigid PVC Soil, Waste and Rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. UPVC SWR Pipe 75 mm |
| 207 | Supplying all materials, labour and T &P for fixing 100mm size PVC \\"P\\" or \\"S\\" Trap / Gully Trap/ Floor Trap of self cleaning design with or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification. (including cost of trap) Floor Trap 100×75 mm |
| 208 | Supplying all materials, labour and T &P for fixing 100mm size PVC \\"P\\" or \\"S\\" Trap / Gully Trap/ Floor Trap of self cleaning design with or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification. (including cost of trap) 110 x75mm size PVC Nahani Trap |
| 209 | Supplying all materials, labour and T &P for fixing 100mm size PVC \\"P\\" or \\"S\\" Trap / Gully Trap/ Floor Trap of self cleaning design with or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification. (including cost of trap) 110mm dia P.V.C. SWR Gully trap |
| 210 | Providing and fixing on wall face Unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110mm Dia PVC Cowl |
| 211 | Providing and fixing on wall face Unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110mm. Dia PVC Bend |
| 212 | Providing and fixing on wall face unplasticised Rigid PVC Soil, Waste and Rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge UPVC SWR Pipe 110 mm |
| 213 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. PVC Shoe 110mm |
| 214 | Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised Rigid PVC Waste & Rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including testing as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge. PVC Bend 110mm |
| 215 | Supplying & Laying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) UPVC Sewer Pipe 160 mm |
| 216 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge inspection chamber Inside size 760mmx760mmx460mm |
| 217 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully Chamber Inside size 250mmx250mm |
| 218 | Constructing Manholes (inside size 750mm x 450mm and 450mm deep) with 15 cm thick R.C.C top slab in (1:2:4) mix having 10mm dia Tor steel @ 10cm C/C both way, foundation 20cm thick cement concrete (1:4:8), inside plaster 12mm thick with cement mortar (1 :3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), 23cm thick brick work with Fly ash bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification Manholes (inside size 750mm x 450mm and 450mm deep) |
| 219 | Constructing Manholes (inside size 750mm x 450mm and 450mm deep) with 15 cm thick R.C.C top slab in (1:2:4) mix having 10mm dia Tor steel @ 10cm C/C both way, foundation 20cm thick cement concrete (1:4:8), inside plaster 12mm thick with cement mortar (1 :3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), 23cm thick brick work with Fly ash bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification Extra for every additional depth of 0.10 m or part there of Manholes having inside size 750mm x 450mm and 750mm deep. |
| 220 | Earth work in excavation of foundation in Ordinary soil with in 50m initial lead & 1.5m initial lift including rough dressing and levelling the bed and refilling the same including watering and ramming including cost of all labour & labour cess etc. complete in all respect as per the direction of the Engineer-in-Charge. |
| 221 | Quarrying, collecting, supplying, filling sand from local area with all leads, lifts and delifts or by mechanical means including cost and conveyance of all materials etc. and spreading the same in layers not exceeding 0.30 mtr. depth for compaction as per direction of Engineer-in-Charge. |
| 222 | P.C.C of (1:3:6 ) with 40mm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compelte in all respect as per Engineer in charge. |
| 223 | Cement concrete (1:2:4) using 12 mm size hard granite chips of approved quarry including royality and all taxes etc complete in all respact as per direction of Engineer in charge. |
| 224 | Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL through consolidated & uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi) as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard &boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering andwith drawing after complete of tube well.(Tube well-1No) Drilling of 200mm. dia. Bore-0.00mtr to 32.75mtr |
| 225 | Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL through consolidated & uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi) as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard &boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering andwith drawing after complete of tube well.(Tube well-1No) Drilling 150mm dia. Bore-32.75mtr to 180.00mtr |
| 226 | Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tubewell to prevent entry of foreign materials from above(PVC/ GI)supplied by the contractor(including cost of pipe) Lowring of 200mm dia pipes-0.00mtr to 32.75mtr including cost of pipe |
| 227 | Cleaning & developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 228 | Supply of 1.0 phase-3HP, borewell submersible pump-1no (Make-Crompton Greaves) with Submersible pump controller-1no, 6mm (6x19)Stainless Steel Wire rope-40 mtr, 2.5 Sqmm 3 core flat submerisble elctric Cable-50 Mtr and fitted and fixed up perfectly in vertical position & testing including cost, conveyance, taxes of all materials, labour, labour cess,T&P etc. required to complete in all respect as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender