Tender For Repair & Renovation Of Submersible Pump Along With E&M Equipment At Tubewell No 13 & 14 Inside Bhagirathi Wtp.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
5 days left
EMD
10600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Submersible Pump Along With E&M Equipment At Tubewell No 13 & 14 Inside Bhagirathi Wtp.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling lifting the submersible pump set with all allied E&M equipment and Dismantling Delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer, electric connection etc. as required |
| 2 | Supply of sub. Pump set with wet type submersible motor complete with multistage pump set working on 415 V 3ph 50Hz AC supply of 10 HP and delivery size 80mm, having the Discharge. 600 LPM, head 48mtr. Make :- KSB/BS & all DJB approved make. |
| 3 | Supply of distribution panel board for automation of operation of T/well up to 10 HP Submersible pump set having sheet enclosure made out of 16 SWG sheet and 50 x 50 x6 mm angle iron and size 1000x750x300mm with 02 feet long legs stand, totally enclosed, power coated free standing floor mounted type, dust & vermin proof, out ward opening lockable door having hidden hinges and bolted back cover both using non-deteriorating neoprene rubber gasket. The various components and sub equipment of the panel will be shaped out of high conductivity electrolyte aluminium conductor and shall be liberal size. The control wiring of the panel will be done with PVC flexible wire of 1.5 mm2 each wire will be terminating a ferule crimped to the wire having the following components.:- MCCB, TPN of 100A breaking cap, 25 KA suitable for motor protection -1 No. Make :- Lauritz Knudsen/ Havell's. Power contactor 32 A. triple pole - 2 Nos. Make :- Lauritz Knudsen/ Havell's. Ampare meter (0-30A) 4'' size square. Type -1No. Make :- Lauritz Knudsen/AE. Voltmeter (0-500v) 4'' size square. Type -1No. Make AE/Lauritz Knudsen - 1 No. Indicating lamp set for RYB phase - 01 Set. Make :- Lauritz Knudsen/ Havell's. Single Phase preventor - 01 No. Make :- Lauritz Knudsen/ siemens. Time switch digital/Analog type - 01 No. Make :- Lauritz Knudsen / Havell's. Over load relay thermal type 14-23 A -1No. Make Lauritz Knudsen/ Havell's. Star delta timer on delay- 01 No. Make :- L&T /Havell's. Automanual switch 2 position selector switch centre off with no + NC block-1No. Make :- Lauritz Knudsen/ Havell's. Three pole power contractor -25A cap. -01 No. Make :- Lauritz Knudsen/ Havell's. TP MCB of 63 Amp. Capacity -- 01 No. Make :- Lauritz Knudsen /Havell's. Supply of changeover switch 63 Amp, capacity four pole - 1 No. Power capacitor of 05 KVAR. 415 volt 50Hz AC supply - 01 No. Make:- L&T /Havell's. The panel should start & stop automatically as per timing set in this. It should also re -start automatically on resumptions of power in case of power failure |
| 4 | Supply MCCB, TPN of 100A breaking cap, 25 KA suitable for motor protection Make:- Lauritz Knudsen/ Havell's/DJB approved make |
| 5 | Supply Power contactor 32 A. triple pole , Make - Lauritz Knudsen/ Havell's/DJB approved make |
| 6 | Supply Ampere meter (0-500v) 4'' size square Type. Make AE/Lauritz Knudsen |
| 7 | Supply Voltmeter (0-500v) 4'' size square Type. Make AE/Lauritz Knudsen |
| 8 | Supply Single Phase preventor. Make :- Lauritz Knudsen / siemens |
| 9 | Supply Time switch digital/ type. Make :- Lauritz Knudsen / Havell's |
| 10 | Supply Over load relay thermal type 14-23 Amp. Make :- Lauritz Knudsen/ Havell's. |
| 11 | Supply of power capacitor of 05 kVar 415 Volt 50 Hz ac supply. Make -Lauritz Knudsen/Havells/DJB approved make. |
| 12 | Supply Three pole power contractor -25A cap. Make :- Lauritz Knudsen/ Havell's159885 |
| 13 | Supply of on load changeover switch 100 Amp. Capacity, four pole, Make :- Lauritz Knudsen /Havell's/ DJB Approved Make |
| 14 | Supply Of P.V.C insulated sheathed copper conductor cable for submersible pump motor of size 6 mm2 x 3core. Make:- Gloster/National/DJB Approved make. |
| 15 | Supply Of 80 mm dia D/F GI pipe in ''B'' class as per ISI 3 mtr (10 feet) long each, complete with cutting flange for submersible cable and support welded. Make Jindal/TATA/DJB Approved make. |
| 16 | Supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia. |
| 17 | Supply of 80mm GI bend with both side flange welded. |
| 18 | S/o M.S. bore cover made out of M.S. plate suitable for 10'' dia bore or as per site requirement complete with suitable hole for passing the 80mm dia GI pipe. |
| 19 | S/o CI, D/F non rising spindle sluice valve PN.1.0 of 80 mm dia. Make :- kirloskar/IVC/Jupiter/DJB Approved make |
| 20 | S/o CI,D/F swing type NRV of 80mm dia. Make :- Kirloskar/IVC/Jupiter/DJB Approved make |
| 21 | S/o rubber mat for electrical purpose of size 1Mx2M and 12.5mm thick. Make:- Jyoti/National/DJB Approved make. |
| 22 | S/o electronic dozing pump (4LPH 5.5 kg) electrically controlled operated 230v. 50 HZ, supply chemical grade tank of 100 ltrs with pipe. Make:- Milton Roy/Clomax/DJB Approved make. |
| 23 | S/o nut bolts with washer of good quality of ½'' x 2'' size |
| 24 | S/o rubber packing sheet synthetic of 50% neoprene. Make:- Jyoti/National/DJB Approved make |
| 25 | Workmanship Charges for lowering the submersible pump set one no. in existing bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e., rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision while executing the work or wherever necessary. The components of the installation shall be of such design so as to satisfactory function under all conditions. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender