Tender For Provision Of Interlocking Paver Block, Chainlink Fencing At Open Area Near Boundary Wall Of Crf At Mbc (Restricted Area) Under Ge (South West) New Delhi-03
Tender Value
2.16 Crore
Estimated cost
Bid Submission
10 Dec 2026
27 days left
EMD
2.91 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Interlocking Paver Block, Chainlink Fencing At Open Area Near Boundary Wall Of Crf At Mbc (Restricted Area) Under Ge (South West) New Delhi-03
BOQ
| Sl. No. | Item Description |
| 1 | M&L for earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and as directed by Engineer-in-Charge |
| 2 | M&L for removing excavated/demolished soil/material n.exc.10.00 km and depositing where directed complete all as specified and directed. |
| 3 | M&L for hardcore of gauge n exc. 63mm of broken stones or boulders, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) 100 mm thick in sub base etc. complete all as specified and directed. |
| 5 | M&L for 80mm thick factory made, ISI marked, hydraulic-pressed, chamfered edge cement concrete paver block of M-30 grade, having a dense smooth glossy wearing face with pigmented face mix and a factory-applied clear protective sealer with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU moulds, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 6 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 7 | M & L for Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and directed. |
| 8 | M & L for preparation of new surface of kerb stones of any description over 10 cm width or girth and applying 02 coats of synthetic enamel paint of colour & shade as approved over priming paints complete all as specified and directed. |
| 9 | Supply and Fixing of 12.5 Mtr Hight Galvanized High Mast complete with top thickness of 4 mm and bottom thickness of 5mm,top dia 150 mm and bottom dia 340 mm , base flange diameter of 830mm, base flange thickness of 32mm, lantern carriage assembly with integrated electric drive & controls , supports, flexible copper cables, earthing and lightning protection system and stainless steel wire rope of 6 mm dia 97/19 gauge and double drum winch with luminaire mounting arm along with LED based aviation lighting system and all devices & accessories as required to complete the high mast lighting system suitable for mounting 4 Nos LED Flood light of 200 watt, 230 volts, IP-66 complete with feeder pillar control Panel complete all as specified and as directed.Note : The rate shall include excavation, earth work and RCC foundation as per the manufacturer’s design and drawing approved by the GE. |
| 10 | Supply and Fixing Energy Efficient IP 66 LED Flood Light 200 Watt for high mast application (12.5 m) to illuminate large areas as in high mast application of 16/15 mtr, façade illumination, large open areas, sports lighting etc. using High Power LEDs of > 5W each with aluminium extruded heat sink for effective heat dissipation, CCT 5000 to 5500K, CRI > 70, pf > 0.95, operating performance temperature -20 degree to +45 degree C, LED Module life span >50,000 hours, with External Surge & over voltage Protection Device (safe up to 440 Volts) with connecting cord of copper flexible cable to be provided with Weatherproof Connector at luminary end. The enclosure made of aluminium alloy, without the use of overall acrylic/glass cover to exhibit high lux utilization factor. The LED Fitting being modular in construction with On-site replaceable parts, built using Independent IP65 rated constant current LED Driver, efficiency >85%, Vthd <10% Ithd <15% and with IP-67 rated inter connections complete all as specified and as directed.Make : Philips (Signify), Havells, Wipro |
| 11 | Supply and fix LED low-intensity aviation obstruction light, red, 10 Watt, IP 65, with photocell, ICAO / DGCA compliant comprising of aluminium housing with polycarbonate enclosure complete all as specified and as directed. |
| 12 | Supply and fix Hot dipped GI Octagonal pole 7mtr long having top dia 70mm, bottom dia 130mm, sheet thickness 3mm, base plate of size 220mmx 200mm x 12mm, foundation bolt 4 Nos x M20 x 750mm long with PCD 220mm complete with in built junction box with cable termination arrangement upto 16 Sqmm x 4 core complete with earth work & RCC for foundation as per manufacturers specifications complete all as specified and as directed. |
| 13 | Supply and fix Hot dipped GI bracket single arm 1.5 mtr long suitable for pole top mounting complete all as specified and as directed. |
| 14 | Supply and fix LED Street light luminaire 45W with pressure die cast housing, prismatic polycarbonate modular secondary lens optics, IP66 ingress protection, 4KV inbuilt & 10KV external surge protection with top opening cover, efficiency 110 lm/W complete all as specified and as directed.Make : Philips (Signify), Havells, Wipro |
| 15 | Note : LED luminaires, drivers and surge protection. The contractor shall submit guarantee from manufacturer for the flood lights, street lights, aviation lights, drivers and surge protection devices for 5 years from the date of commissioning. |
| 16 | Supply and fix 1.0 Sqmm 3 core copper flexible PVC insulated FRLS-H cable of 1100 volts including passing from street light pole junction box and up to street light fitting complete all as specified and as directed. |
| 17 | Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area complete all as specified and as directed. |
| 18 | (i) 35 Sqmm x 3.5 core |
| 19 | (ii) 10 Sqmm x 4 core |
| 20 | Supply and fix Double Wall Corrugated (DWC) High density poly ethylene pipes (HDPE) of ring stiffness not less than SN-8 (8 kN/m²) conforming to IS 16098 (Part 2) fixed complete in wall or in floors etc of size 63mm dia Outer Dia with antirodent and non-flame properties etc complete all as specified and as directed by Engr-in-Charge. Note : Earth work measured and paid separately. |
| 21 | Supply, installation, testing and commissioning of factory made as per IS/IEC:61439:2011 Part 1 & 2, rated short-circuit withstand of 25 kA for 1 sec, totally enclosed, Double door, IP-55, dust and vermin proof, free standing, fully compartmentalized cubical type front & back openable door LT panel suitable for 415 volts, 3 phase, 50 HZ, 4 wire AC electric system, outdoor type with canopy fabricated from 3.15mm thick CRCA sheet steel, epoxy polyester powder coated with a dry film thickness of 70–80 microns of flint grey shade (RAL-7032) with automatic 9 tank process, Bus bar 4 pole 100 Amp rated electrolytic-grade copper busbar system, with colour coated heat shrinkable sleeves supported on non hygroscopic DMC/SMC insulators complete with gland plates, lifting hooks, anti-condensation heater with thermostat (louvers break IP-54/55), bus bar inter connections, earthing terminals, labeling, cable alloy suitable for termination of cables, PCC foundation including supply and fixing of following switch gear and accessories in the panel complete all as specified and as directed:-Incoming:-(i) MCCB 4 Pole 63 Amp 50 Hz, 415V, minimum 25 kA breaking capacity -01 No(ii) 3 Phase VAF+PF digital multifunctional meter consisting of ammeter, voltmeter, frequency meter, PF, accuracy Class 1 or better alongwith suitable CTs-01 set.(iii) LED Lamp phase indicator RYB-01 set.Outgoing:-(i) Street light timer switch comprising of programmable astronomical timer, suitably rated power contactor(s), control relays, control-circuit protection and manual-OFF-automatic selector switches(ii) MCCB 4 Pole 40 Amp 50 Hz, 415V, minimum 25 kA breaking capacity-02 No (High Mast circuit +pole circuit)(iii) LED Lamp phase indicator RYB-02 set.Note : The contractor shall submit manufacturer's design documents, approved drawings and routine test certificates |
| 22 | Excavation in trenches in any type of soil, n.exc 1.5m wide and n. exc 1.5 m depth and getting out for foundation of pole, stay, laying of cable and pipe etc complete all as specified and as directed. |
| 23 | Returning and filling, including spreading levelling and well ramming in layers n exc 25 cm complete all as specified and directed. |
| 24 | Removing excavated material a distance n. exc 50 m & depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. |
| 25 | M&L for dry river sand for cushioning to under ground cable in trenches incl spreading, leveling and hand punning complete all as specified and directed. Note : For measurement purpose punned thickness shall be considered. |
| 26 | Supply and laying in replacement unreinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmx150mmx40mm complete all as specified and as directed. |
| 27 | Material and Labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip of size 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed by Engr-in-Charge. |
| 28 | M&L for excavating in post holes (or similar holes) each in soft/loose soil n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 29 | M&L for excavating in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 30 | M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) in foundation filling, sub base and mass concrete filling etc. complete all as specified and directed. |
| 31 | M & L for PCC (Nominal Mix) type B1 1:2:4 Using 20mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 32 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 33 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified and directed. |
| 34 | M&L Design mix cement concrete M-30 grade as in Foundation, including raft footings, foundation beams, plinth beams, bases for column etc., basement slabs, underreamed piles and mass concrete complete all as specified and directed.. |
| 35 | M&L design mix cement concrete M-30 grade as in Columns, pillars, piers,posts and struts complete all as specified and directed. |
| 36 | M&L for TMT steel bars of grade Fe-500D 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 37 | TMT steel bars of grade Fe-500D dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 38 | M&L for Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) 6mm to 8 mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 39 | S&F of Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 40 | S & F of Mild steel screw bolts diameter of neck in 5-10 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long complete all as specified and directed. |
| 41 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., conforming to Fe 410-W (Gde E- 250) quality A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 42 | M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar (1:6) complete all as specified and directed. |
| 43 | M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 18-20 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over backing coat 15 mm thick in CM 1:3 complete all as specified and directed. |
| 44 | M&L for Rendering on fair faces of brick work or concrete surfaces, 15mm thick in cement mortar 1:4 ,surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 45 | S&F Chain link fencing with PVC coating 100x100mm mesh . 8 SWG wires, height as ditected by Engr-in-charge and fixing to any type of post, rail with straining bolts including provision of binding wire complete all as specified and as directed. The contractor shall submit guarantee from manufacturer for the PVC-coated fabric for 5 years against peeling, cracking, fading and rusting of the core wire. |
| 46 | M & L two coats of synthetic enamel paint over one coat of red oxide primer over 10 cm width or girth after necessary preparation of new steel surfaces complete all as specified and directed. |
| 47 | M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)over 3mm thick wall care putty including material and labour charges etc complete all as specified and directed. |
| 48 | M&L for returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 49 | M&L for removing excavated/demolished soil/material n.exc. 10.00 km and depositing where directed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender